home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.sunet.sepub/pictures
/
2014.11.ftp.sunet.se-pictures.tar
/
ftp.sunet.se
/
pub
/
pictures
/
ACiD-artpacks
/
www
/
mirrors
/
acheron
/
discus_admin_245059122
/
language.conf
< prev
next >
Wrap
Text File
|
1999-01-26
|
27KB
|
923 lines
###################################################################
# VERSION: English 3.00 #
# TRANSLATED BY: Kevin Paulisse #
# #
# *********** Do not modify or translate this notice! *********** #
# #
# Discus is copyright (c) 1998 by Kevin W. Paulisse and William #
# F. Polik, all rights reserved. This language configuration #
# file has been purchased by DiscusWare from the translator named #
# above, and is in turn licensed to you, the end-user, under the #
# same terms as Discus itself. #
# #
# TRANSLATORS PLEASE READ THIS IMPORTANT NOTICE BEFORE PROCEEDING #
# #
# Lines beginning with a '#' are treated as comments. #
# Blank lines are ignored, as is leading and trailing space. #
# Lines beginning with '$' or '@' have special meaning to the #
# program and should not be changed or translated. #
# Anything after a '##' is treated as a comment. #
# Anything in this file is read literally, including HTML. It #
# is not interpreted, so don't use Discus formatting tags. #
# The one exception is the use of Discus variables, shown #
# as %variables (starting with %). These are documented #
# if it's not obvious what they do. The use of such #
# variables is rare. Don't translate the variable names! #
# #
# We need translators! If you are willing to translate this #
# language configuration file, the documentation, and the #
# templates to another language, please write us at the following #
# address: discus@mulliken.chem.hope.edu. #
###################################################################
###################################################################
# TEXT UNCHANGED SINCE VERSION 2.50 #
# #
# If copying and pasting from version 2.50 language.conf file, #
# select all text between this point and the "TEXT ADDED FOR #
# VERSION 3.00" section, and paste in the entire language.conf #
# file from version 2.50 (except for the header information). #
###################################################################
###################################################################
# DATES, TIMES, AND TIME FORMATS #
###################################################################
#------------------------------------
# Days of the week, separated by commas:
@DAY(,)
Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
#------------------------------------
# Months of the year, separated by commas:
@MONTH(,)
January, February, March, April, May, June, July, August, September, October, November, December
#------------------------------------
# Time settings
$HRCLOCK
12 ## Use 12 hour clock
#24 ## Use 24 hour clock
$AM
am ## Used in 12 hour clock only
$PM
pm ## Used in 12 hour clock only
#------------------------------------
# Configure date appearance
# For this section:
# %weekday => day of week
# %month => name of month
# %nmonth => number of month
# %day => number of day
# %year => year
# %hour => hour
# %minute => minute
# %ampm => am or pm (used in 12 hour clock only)
# Date in long format and short format
$LONGDATE
# English: %weekday, %month %day, %year - %hour:%minute %ampm
# French: %weekday, le %day %month, %year - %hourh%minute
%weekday, %month %day, %year - %hour:%minute %ampm
$SHORTDATE
# English: %month %day - %hour:%minute %ampm
# French: %day %month - %hourh%minute
%month %day - %hour:%minute %ampm
$REALSHORTDATE
# English: %nmonth/%day, %hour:%minute %ampm
# French: %day/%nmonth, %hourh%minute
%nmonth/%day, %hour:%minute %ampm
$DATEONLY
# English: %month %day, %year
%month %day, %year
# The separator you use between hours and minutes. It's the : in 11:30.
# In French, it's the h in 11h30.
$TIMESEPARATOR
:
#------------------------------------
# Configure "Posted by ... on ..." appearance
# For this section:
# %name => name of person posting message (from profile if appropriate)
# %date => date and time using the long format defined above
$POSTBY
<FONT SIZE=-1>By <B>%name</B> on <B>%date</B>:</FONT>
###################################################################
# GENERAL STUFF #
###################################################################
# "Return to" in window status bar
$NBRETURN
Return to
# "main page" in window status bar
$NBMAINPAGE
main page
# "preview" -- THIS IS NOT DISPLAYED. However, this needs to be the
# word you used in place of "preview" in the template forms. When
# this word is seen on a button, the preview screen is brought up.
$PREVIEW
preview
# Some languages don't have the verb "Preview" the same as the noun
# "Preview" like in English. If your language has an alternate
# spelling/word for "Preview" that you're going to use on a button,
# you can define it here.
#$PREVIEW2
#preview
# "Add a Message" -- THIS IS NOT DISPLAYED. However, this needs to
# be the phrase you used in place of "Add a Message" in the
# addmessage-*.txt message box files.
$ADDMESSAGE
Add a Message
# Possible formatting errors in "WebTags" formatting tags
#
# * {your wrong tag} could mean {corrected tag} - {description}
$COULDMEAN
could mean
# Other formatting errors
$FORMATTINGERROR
Formatting Error
$NOCLOSINGBRACE
There is no closing brace for the code <B>\%code{...}</B>.
$NOSPECIALCHARACTER
The special character <B>%char</B> does not exist.
$WRONGNUMBEROFARGUMENTS
# %code => Name of formatting code
# %required => Required # of arguments
# %your => Number of arguments you actually provided
The formatting code <B>%code</B> requires <B>%required</B> argument(s);
you provided only <B>%your</B> argument(s).
$CODEDOESNOTEXIST
The formatting code <B>%code</B> does not exist.
$NONESTHTML
The formatting code <B>%code</B> does not allow other formatting tags
to be nested inside it.
###################################################################
# TEXT FROM "BOARD-NEWMESSAGES.CGI" #
###################################################################
# The title of the page
$NMTITLE
New Messages
# The front page
$NMSEARCHIN
Search in
$NMSEARCHBUTTON
Search
$NMLASTCHECK
Messages since I last checked for new messages:
# Note: username and password are set in the user profile script section
$NMDONTREMEMBER
Don't remember this check
$NMWITHINLAST
Messages posted within the last
$NMMINUTES
Minute(s)
$NMHOURS
Hour(s)
$NMDAYS
Day(s)
$NMAFTER
Messages posted after
$NMDEFAULTTIME
12:01
$NMTREEVIEW
Display results in a message tree view
# Where to search
#
# You can make this something like "The entire board" or to customize
# it for your site make it "All of Joe's Board", substituting in your
# title. It's up to you based on your language.
# %title -> Title of your board
$NMALLOF
#All of %title
(All Topics)
# Settings dealing with the display of dates
$NMTODAY
Today
$NMYESTERDAY
Yesterday
# Dates like "Last Wednesday"
#
# %weekday => Day of week as defined above
$NMLASTDAY
Last %weekday
# The time of the last post
#
# %date => Date in long format defined above
$NMLASTPOST
Most recent post: <B>%date</B>
# Text for people who check with their username/password
$NMNOCHECK
You have not ever checked for new messages using this option. Posts within the last
seven days will be displayed.
$NMCHECKSEVENDAYS
You last checked for new messages more than 7 days ago. Posts within the last 7 days
will be displayed. You can use other search methods to get messages from before 7
days ago.
$NMYOULASTCHECKED
You last checked for new messages on
$NMNOTRECORDED
This check was not recorded.
# Other results
$NMRESULTSOFSEARCH
Results of Search
$NMTREEVIEWBUTTON
Tree View
$NMOLDVIEWBUTTON
Text Only View
# For this part, %d is the number of discussions with new messages
$NMZERONEW
0 discussions have new messages.
$NMONENEW
1 discussion has new messages.
$NMPLURALNEW
%d discussions have new messages.
###################################################################
# TEXT FROM "BOARD-POST.CGI" #
###################################################################
# The word for "Anonymous" on posts
$BPANONYMOUS
Anonymous
# Authentication error -- for when you mess up your username/password
$BPAUTHERROR
Authentication Error
$BPAUTHERRORINVALID
Your username/password combination was invalid, or you do not have
permission to post to this topic. You may revise your username
and password using the form at the bottom of this page.
$BPAUTHERRORNONAME
You must enter something as your username.
# Add message error -- for when you don't type in a message
$BPADDMSGERROR
Add Message Error
$BPADDMSGERRORDESC
You must type a message to add!
# Create New Conversation Error -- for when you don't type in a subject
$BPCREATEERROR
Create New Conversation Error
$BPCREATEERRORDESC
You must type a subject for your new conversation!
# Title of the screen
$BPNORMALTITLE
Preview: New Message
$BPCREATETITLE
Preview: New Conversation
$BPNORMALDISPLAY
New Message
$BPCREATEDISPLAY
New Conversation
# Instructions on how to post
$BPMESSAGEPOST
The following is a preview of your new message. If you used any formatting tags
in your post, they should be working correctly in the preview. If your post is
correct, click on "Post this Message" below the preview. Otherwise,
you can revise your message.
$BPCREATEPOST
The following is a preview of your new conversation and message. If you used
any formatting tags in your post, they should be working correctly in the
preview. If your post is correct, click on "Post this Message" below
the preview. Otherwise, you can revise your message.
# Possible formatting errors
$BPPOSSIBLEFORMATTINGERRORS
Possible Formatting Errors
$BPPOSSIBLEFORMATTINGERRORSDESC
The following possible formatting errors been detected in your message. Please
check the preview of your message carefully to make sure that your formatting
codes are working. The formatting you selected should be displayed properly
within the preview. You should <I>not</I> see the formatting tags within the
preview.
# Subject: within preview box
$BPSUBJECTTAG
Subject:
# Post this message
$BPPOSTTHISMESSAGE
Post this Message
# Cancel post
$BPCANCELPOST
Cancel Post
# Preview/post message
$BPPREVIEWPOST
Preview/Post Message
# Revise your subject
$BPREVISESUBJECT
Revise your Subject
# Revise your message
$BPREVISEMESSAGE
Revise your Message
# Message already posted
$BPALREADYPOSTED
Message Already Posted
$BPALREADYPOSTEDDESC
You have already posted a message to this discussion which:
<UL>
<LI>Was posted within the last two minutes
<LI>Was posted by you
<LI>Was the same as the message you entered before
</UL>
<P>
You probably hit the button twice.
$BPCLICKCONTINUE
Click here to continue.
$BPPROVIDEFILE
Provide file for
$BPIMGUPLOADBUTTON
UPLOAD
$BPIMGUPLOADCANCEL2
this link
# Posting disabled
$BPPOSTINGDISABLEDTITLE
Posting Disabled
# Disabled posting
# %aopen => <A HREF="..../board-contact.cgi">
# %aclose => </A>
$BPPOSTINGDISABLEDDESCR
Posting is currently disabled in this topic. %aopen<B>Contact your discussion
moderator</B>%aclose for more information.
# E-mail notification stuff
# Note: \ is automatically replaced with a newline (\n) in this section
# because formatting of newlines is crucial.
$BPREPLYBYEMAILMESSAGE
********************************************************* \
TO REPLY TO THIS MESSAGE BY E-MAIL, USE THIS SECTION! \
\
-----------Enter your message below this line------------ \
[Delete this line and enter your message here] \
-----------Enter your message above this line------------ \
\
********************************************************* \
*** DO NOT MODIFY THE FOLLOWING LINE!!! *** \
###################################################################
# TEXT FROM "BOARD-IMAGE-LISTER.CGI" #
###################################################################
# Title of the page itself
$ILTITLE
Available Clipart
# Instructions on what to do
$ILINSTR
To insert a clipart image into your post, enter the tag
<B>\clipart{</B><I>clipart_image_name</I><B>}</B> in the text
of your message. The tags for available clipart images are listed here.
# The word "TAG"
$ILTAG
TAG
# The phrase "IMAGE (Shown Actual Size)"
$ILIMAGE
IMAGE (Shown Actual Size)
# The name of the formatting tag used
$ILCLIPTAG
clipart
# Back to previous page (at the bottom)
$ILBACK
Back to previous page
###################################################################
# TEXT FROM "BOARD-POST-FORM.CGI" #
###################################################################
# The title of the whole screen ("Create New Conversation")
$BPFCREATETITLE
Create New Conversation
# Tells you what to do
$BPFSUBJECT
Type in a subject for the new conversation:
###################################################################
# TEXT FROM "BOARD-CONTACT.CGI" #
###################################################################
# The title of the whole screen ("Contact Moderators")
$BCTITLE
Contact Moderators
# The instructions
$BCINSTR
Please address general questions and concerns to
# Moderators:
$BCMOD
Moderators:
# Back to previous page (at the bottom)
$BCBACK
Back to previous page
###################################################################
# TEXT FROM "BOARD-TREEVIEW.CGI" #
###################################################################
# Title of screen
$TVTITLE
Tree View
###################################################################
# FILE LOCKING TEXT #
###################################################################
$FILELOCKERROR
File Locking Error
$FILEISLOCKED
One of the files required to complete this operation has been locked
by another process. Please wait 5 seconds and then submit your
request again.
###################################################################
# TEXT ADDED FOR VERSION 3.00 #
# #
# Note to version 3.00 translators: #
# First, greetings and thanks! If you have translated the #
# language.conf file for version 2.50, you have can use much of #
# your previous work. If you were to copy and paste in your #
# version 2.50 language.conf file above this point, replacing #
# all text that is there, and translate the text below, it would #
# work fine! In version 3.00, we made subtle changes to the #
# new messages and posting script. We didn't change the image #
# lister script, the tree view script, or the general variables #
# in the language file. The profile script, keyword search #
# script, and upload script were pretty much complete rewrites #
# since the previous version. The previous variables you have #
# translated for version 2.50 will not conflict with these, but #
# there are new declarations below that replace the previous #
# declarations. We will take care of deleting irrelevant parts #
# of the translation above, so you don't have to worry about it! #
# Again, thanks for your translation work! #
###################################################################
# NEW MESSAGES: If enabled, this is the description for a check box that disables
# the "7 day maximum" when searching for new messages.
$NM_SHOW_ALL_NM
Don't use seven day maximum
# POSTING: This warns people who checked the "Anonymous" box that their name is
# revealed if the administrator or moderator has disabled anonymous posting board-wide.
$BPWARNANONYMOUS
<FONT SIZE=-1 COLOR=#ff0000><B>NOTICE!</B> Anonymous posting is not permitted in
this topic. Your name is revealed on your post!</FONT>
# FILE LOCKING: Special case for regeneration of the board
$FILELOCKREGEN
All files on the board are currently locked, as the board is being
regenerated. This process will be finished in %sec seconds or less.
Please wait 15 seconds and then submit your request again. We
apologize for any inconvenience this may cause.
# POSTING/UPLOAD: The following items have been revised due to the addition of the
# attachment upload facility in Discus Pro.
# Image/attachment upload form
$BPIMGUPLOADTITLE3_00
Image/Attachment Upload Form
# Image/attachment Upload Form
$BPIMGUPLOADINSTR3_00
Please provide the files for the following referenced images/attachments. Then click on
"UPLOAD" to continue. <P> <U>Note</U>: If you do not see a
"Browse..." button next to the blanks below, then your browser does
not support form-based file upload and you will not be able to upload images/attachments to
your post.
$BPIMGUPLOADCANCEL13_00
To cancel upload of images/attachments, click on
$BPIMGUPLOADCANCEL33_00
If you cancel upload, you will not be able to upload images/attachments to your post.
# E-mail notification stuff
# Note: \ is automatically replaced with a newline (\n) in this section
# because formatting of newlines is crucial.
$BPR_STANDARD_FOOTER
------------------------------------------------------------\
DO NOT REPLY TO THIS MESSAGE! It is an automatic e-mail\
notification message from the discussion board indicating\
that a new message was posted. If you do not wish to\
receive further e-mail notification messages from this\
discussion board, edit your user or moderator profile to\
turn off the e-mail notification option.
$BPR_GOTOLINK
Use this link to go directly to the discussion:
# If the discussion is closed...
$AUTHERROR_CLOSED
All posting to this topic has been turned off by the discussion
moderators or system administrator. You may not post to this
discussion.
# This is a welcome message that is displayed on a new topic with
# no content. Discus formatting tags CAN BE USED here. Direct
# HTML should NOT be used.
# %topicname => Name of topic
$WELCOME_TO_TOPIC
Welcome to \i{%topicname}. You may enter any of the discussions above
by clicking on the appropriate link. Or, to start a new discussion of your own,
click on the "Create New Conversation" button.
###################################################################
# TEXT FROM BOARD-PROFILE.CGI #
# (Pretty much a complete rewrite since version 2.50) #
# *You can delete all of the text attributed to this script #
# from any previous remnants of the language file if you wish!* #
###################################################################
$PROFEDIT_TITLE
Profile Editor
$PROFEDIT_INFO
Information About You
$PROFEDIT_YOURUSERNAME
Username:
$PROFEDIT_YOURFULLNAME
Full Name:
$PROFEDIT_YOUREMAIL
E-mail Address:
$PROFEDIT_SAVEINFO
Save this Information
$PROFEDIT_EMAILNOTIFY
E-mail Notification
$PROFEDIT_CHOOSETOPICS
Choose one or more of the following topic(s) to enable
e-mail notification. You will be notified by e-mail
of others' posts in the topics you select.
$PROFEDIT_MYPOSTS
If you would also like to receive a copy of your own
posts by e-mail, check the box below.
$PROFEDIT_MYPOSTSBOX
My own posts
$PROFEDIT_CHANGEPASSWORD
Change Password
$PROFEDIT_CHANGEPASSWORD_INSTR
To change your password, enter your new password in the
first text box. Verify your new password by typing your
new password again in the second text box.
$PROFEDIT_NEWPASS
New Password:
$PROFEDIT_VERIFY
Verify New Password:
$PROFEDIT_SAVEBUTTON
Save Changed Password
$PROFILE_TITLE
Profile Editor
$PROFILE_USERNAME
Username:
$PROFILE_PASSWORD
Password:
$PROFILE_AUTHERROR
Authentication Error
$PROFILE_AUTHERROR_DESCR
The username and password combination you supplied is not valid.
You may receive this message for several reasons:<P>
1) The username and password you entered are not correct<P>
2) The board administrator or a moderator has denied you permission
to edit your profile<P>
3) You recently changed your password but did not log out and then
back in to activate your new password<P>
4) You did not supply your current password, but attempted to log in
with a password that was stored in a cookie -- you must manually
enter your password into the box to edit your profile
$PROFILE_CHPASS_ERROR
Change Password Error
$PROFILE_CHPASS_ERROR_ALPHA
Your password may contain alphanumeric characters only.
$PROFILE_CHPASS_ERROR_MATCH
The two passwords that you entered do not match.
$PROFILE_CHPASS_ERROR_LENGTH
Your password must be a minimum of two characters in length.
$PROFILE_CHANGEDPASSWORD
Password Successfully Changed
$PROFILE_CHANGEDPASSWORD_DESCR
Your password has been successfully changed. If you wish to
edit your profile further, you must log in again by clicking
on the "Edit Profile" link from the menu.
$PROFILE_LOGIN
Enter your username and password below to edit your profile.
$PROFILE_LOGIN_BUTTON
Log In
$PROFILE_SYNC_TITLE
Synchronize Profiles
$PROFILE_SYNC_DESCR
You have more than one profile with different settings. This may occur if
you have recently had a new account created for you or if a moderator has
edited your profile. Please select the profile that you wish to use from
the choices below.
<P>
The chances are that one of the profiles contains all of your settings and
one of the other profiles does not contain your settings. Choosing the
profile with all of your settings will prevent you from having to re-enter
them.
$PROFILE_CHOOSETHISONE
Select
$PROFILE_MYPOSTS
My own posts
$LOGIN_YOUARELOGGEDIN
You are currently logged in as <B>%user</B>. If you wish to clear this login
information, click the button below.
$LOGIN_CLEARBUTTON
Log Out
###################################################################
# TEXT FROM "BOARD-SEARCH.CGI" #
# (Pretty much a complete rewrite since version 2.50) #
# *You can delete all of the text attributed to this script #
# from any previous remnants of the language file if you wish!* #
###################################################################
$BSCH_TITLE
Keyword Search
$BSCH_INSTR
To search the board, enter one or more words below. Placing a <B>+</B>
sign in front of a word <I>requires</I> the word. Placing a <B>-</B> sign
in front of a word <I>excludes</I> the word. Placing a "phrase in quotes"
matches the entire phrase.
$BSCH_SEARCHFOR
Search for:
$BSCH_LOOKIN
Look in:
$BSCH_TITLESOF
Subject lines
$BSCH_AUTHORS
Names of authors
$BSCH_TEXT
Text of messages
$BSCH_ALLOFTHESE
Subject lines, authors, and messages
$BSCH_TOPICS
Search topic:
$BSCH_ALLTOPICS
All topics on board
$BSCH_TYPEOFPAGE
Type of page:
$BSCH_TYPEOFPAGE_1
Pages containing messages
$BSCH_TYPEOFPAGE_3
Pages with or without messages
$BSCH_LIMITTO
Limit to:
$BSCH_LIMIT_1DAY
Pages with messages posted in the last day
$BSCH_LIMIT_2DAY
Pages with messages posted in the last 2 days
$BSCH_LIMIT_7DAY
Pages with messages posted in the last week
$BSCH_LIMIT_14DAY
Pages with messages posted in the last 2 weeks
$BSCH_LIMIT_30DAY
Pages with messages posted in the last month
$BSCH_LIMIT_NONE
(No limit on time)
$BSCHBUTTONTEXT
Perform Search
$BSCHRESULTS
Search Results
# Here, %query is what the user typed in, and %results is the number
# of results that were matched
$BSCH_0HITS
Sorry, your search for <B>%query</B> did not match any pages.
$BSCH_1HIT
Your search for <B>%query</B> matched <B>1</B> page.
$BSCH_MANYHITS
Your search for <B>%query</B> matched <B>%results</B> pages.
$BSCH_AUTHOR
Author:
$BSCH_DOT
###################################################################
# TEXT FROM "BOARD-IMAGE.CGI" #
# (Pretty much a complete rewrite since version 2.50) #
# *You can delete all of the text attributed to this script #
# from any previous remnants of the language file if you wish!* #
###################################################################
$BI_UPLOAD_ERROR_TITLE
Upload Error
$BI_UPLOAD_ERROR_MESSAGE
One or more of the file(s) you attempted to upload produced an error.
You may use the form below to supply new file names for the upload(s)
that have caused errors. For simplicity, any upload that was
successful is not shown on this form.
<P>
Please provide the files for the following referenced images/attachments. Then
click on "UPLOAD" to continue.
$BI_UPLOAD_ERROR_BADFORMAT
The file you attempted to upload had a disallowed file format. The
file format <B>%format</B> is not valid for image uploading.
$BI_UPLOAD_ERROR_NODATA
The file you attempted to upload did not properly transfer to the
server. This could occur if you have specified an invalid file name,
you did not specify a file name, or if the file you attempted to upload
had zero length. Double check your file name.
$BI_UPLOAD_EXCEEDED_MAXLENGTH
The file you attempted to upload is larger than the maximum size for
a file as specified by the board administrator. File size is limited
to %maxsize kilobytes. Your file was %yoursize kilobytes. If this
is an image, try reducing the dimensions or the color depth. If this
is another type of file, try compressing the file with a zip program.
$EMAIL_NOTIFY_NOTEXT
(The text of this message appears on the discussion page.)
$BP_MESSAGE_EXCEEDED_MAXLENGTH
The message you entered is larger than the maximum size for a message
as specified by the board administrator. Message size is limited
to %maxsize kilobytes. Your message was %yoursize kilobytes. You
can try splitting this message into two or more separate posts.
$FEATURE_NOT_SUPPORTED
Feature Not Supported
$FEATURE_NOT_SUPPORTED_DESCR
The feature you requested is not available in this version of the software.
We apologize for any inconvenience.
###################################################################
# MISCELLANEOUS VERSION 3.0 LANGUAGE ENTRIES #
###################################################################
$MESSAGE_ICON_TOP
Top of page
$MESSAGE_ICON_UP
Previous message
$MESSAGE_ICON_DOWN
Next message
$MESSAGE_ICON_BOTTOM
Bottom of page
$MESSAGE_ICON_LINK
Link to this message