home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Power-Programmierung
/
CD2.mdf
/
tools
/
exerun
/
exerun.doc
< prev
next >
Wrap
Text File
|
1989-11-23
|
50KB
|
1,129 lines
EXERUN controls running .EXE softwares.
version 1.0a (c) copy right 1989 All Rights Reserved
Have you wondered if there is a way to prevent your
softwares from running without the need for TSR utilities to
prevent it? And do so without changing the size of your
softwares? There are softwares with .COM extensions such as
CHKDSK.COM which this cannot help. But for softwares which
end with .EXE, such as WP.EXE or DBASE.EXE, this is it.
This modifies your .EXE softwares so that they will not run,
unless EXERUN.EXE is in memory. When in memory, this can
1) check if file size or date/time was changed by a virus
2) check above + if BIOS and DOS changed i.e. someone else
is running your software in another computer.
3) request password.
4) check if other required softwares, such as TSR utilities
were already ran.
5) need other types?
Without this program in memory, or if the above criteria
were not matched, then your .EXE software will abort. And
because this does not change the .EXE software file size or
date/time and does not depend on any file containing the
list of files to protect, there is no trace left that the
.EXE softwares were modified.
This version corrects lock up with Turbo C programs and adds
locking of passwords inside the program as well, so that
there is no need to have a EXERUN file (no extension).
Do not use this on copy protected .EXE softwares which you
cannot back up, just in case anything happens.
IF YOU USED VERSION 1.0, DELETE THE .EXE SOFTWARES WHICH YOU
HAVE ALREADY MODIFIED AND USE A NEW COPY. (just in case)
The set up of this document is as follows:
Explanations of various in-line command parameters.
How EXERUN works.
Chat.
Prompts and messages generated by EXERUN.
Disclaimer, contribution $/address, info for sysops and
shareware distributors.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
If you simply type
EXERUN<ntr>
then you get the help page built into this program for quick
reference. The help page does not waste memory when this
program becomes memory resident.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This discusses the P (protection) option as in
EXERUN P DBASE ACD<ntr>
Skim through rapidly before reading. Anything not explained
or does not seem clear is explained right after the subject
is discussed or mentioned.
The document assumes that you want to protect a .EXE
software called "DBASE.EXE", which happens to be a popular
data base software. I hope that they consider this a free
plug of an ad for their product and not a "look and feel"
litigation case, again.
A, B, C, D OF PROTECTION TYPES
Before you modify your .EXE softwares, make sure that you
backed them up so that you have copies of .EXE softwares
which were not modified by this program. After this
program modifies your .EXE softwares, it will not run
unless this program is memory resident, and the .EXE
softwares are NOT changed in file size or file date/time to
indicate that they have been tampered with. And because
this does NOT depend on the presence of a file containing
the list of .EXE softwares to protect, there is way to
determine which .EXE softwares were protected or not.
This version has five types of protections which you can add
to your .EXE softwares using the P option from the command
line: Just enter the software name to prevent it from
running unless this program is in memory, an Anti-virus
feature to check software size/date/time, BIOS restriction
computers this will work on, Confirmation of use via a
password and finally, Dependency on TSRs before running.
JUST MAKING SURE EXERUN.EXE IS IN MEMORY
If you want to modify your DBASE.EXE softwares so that it
will not run unless EXERUN.EXE is already in memory, type,
EXERUN P DBASE<ntr>
This only modified your DBASE.EXE software such that it will
not run unless EXERUN.EXE is already in memory. If you run
DBASE.EXE without EXERUN.EXE in memory, then DBASE.EXE will
abort with a "divide overflow" message.
ANTI-VIRUS ATTRIBUTE
To protect your DBASE.EXE software by preventing it from
running if the file size or date/time was changed by a
virus or a plankster,
EXERUN P DBASE A<ntr>
This adds the anti-virus attribute to DBASE.EXE. With this
feature, DBASE.EXE will be modified such that it will not
run unless EXERUN.EXE is already in memory. When you run
DBASE.EXE while EXERUN.EXE is in memory, before DOS can run
DBASE.EXE, EXERUN.EXE will check to see if the present file
size and file date/time of the present DBASE.EXE matches the
recorded values or not. If no match occurs, or if
EXERUN.EXE is not in memory, then DBASE.EXE will abort with
a "divide overflow" message.
The EXERUN file can be set so that EXERUN.EXE will display a
message stating "Software changed!". Or you may choose not
to display it and have the user guessing what went wrong.
The sample EXERUN file, last line, has the "a" of "abcd" so
that EXERUN.EXE will display the message.
BIOS/DOS/equipment
EXERUN PDBASE.EXE B<ntr>
Adds the BIOS/DOS/equipment-list check as well as anti-virus
attribute to DBASE.EXE. Note that the "P" in protect can be
connected to the file name "DBASE.EXE" and you can type in
the ".EXE" extension, if you want to.
When you run DBASE.EXE while EXERUN.EXE is in memory, before
DOS runs DBASE.EXE, EXERUN.EXE will check the file size,
date/time and also checks to see if the BIOS chip, DOS
version and equipment listing matches the recorded value or
not. This is an anti-piracy feature to make your .EXE
softwares run on only the specified computer, unless the
person who pirates it also has the same computer BIOS
version by the same manufacturer and the same peripherals
and the same DOS version and also pirates this program as
well.
The equipment list checked is the standard one consisting of
the number of serial ports, the number of parallel ports,
the number of diskette drives, presence of game port and
video card attached.
The EXERUN file can be set so that EXERUN.EXE will display a
message stating "Bad match!". The sample EXERUN file, last
line, has the "b" of "abcd" so that EXERUN.EXE will display
the message.
If either of the A (anti-virus) or B (BIOS/DOS/eq.) was used
with a short circuited EXERUN.EXE (option 0, see way
below), your .EXE software must run with the short circuited
EXERUN.EXE which gave it the protection, because not only
will the .EXE software's file-size/date/time be checked, but
the passwords/filenames from the EXERUN file stored inside
EXERUN.EXE will also be checked as well)
CONFIRMATION VIA A PASSWORD
EXERUN PDBASE C<ntr>
Before DOS runs DBASE.EXE, EXERUN.EXE will ask the user for
a password to confirm authorization. The 26 passwords are
stored in the EXERUN file (no extension), with different
passwords for each .EXE software which begins with a
different letter. With DBASE.EXE, the default password
required is the small letter "x", followed by a <ntr>,
because DBASE.EXE begins with the letter "D". (Look at the
EXERUN file. After the version ID line, the next line has
the pass for .EXE softwares which begin with "A", the next
has the pass for those which begin with "B", "C" and then
"D" as in DBASE.EXE)
Each password can be up to ten characters long, including
spaces and extended ascii chr$(1) - chr$(255), but excluding
the chr$(13) and chr$(10), which are <ntr> and line feed,
respectively. The passwords are case sensitive, meaning
that capital letters are different from small letters, such
that "passwd" does not match "PASSWD", "Passwd", "passwD" or
"pass". However, you could have typed the above line as
"exerun pdbase c<ntr>", since there is no need to be case
sensitive when running it, of course.
When typing the password, you cannot see what you type, but
back space allows you to correct single character typing
errors.
If EXERUN file is set, EXERUN.EXE will display a message
stating "Pass " with the cursor at the end. If
not set, then it will appear as if DBASE.EXE has stopped
working. After you type <ntr>, then it will exit via
"divide overflow" message. The sample default EXERUN file,
last line, has the "c" of "abcd" so that EXERUN.EXE will
display the message.
You can mix these options freely.
DEPENDENCY ON TSRs
EXERUN P DBASE D<ntr>
Imposes a TSR dependent restriction: Right after EXERUN.EXE
becomes memory resident, it remembers up to three .EXE or
.COM softwares which were ran right after itself.(usually
inside a batch file). If you want to run other memory
resident utilities which must be in memory, then run then
right after EXERUN.EXE. EXERUN.EXE will match the names of
the utilities which were ran with the list which were in
the EXERUN file, so that when you run DBASE.EXE, EXERUN.EXE
will check to make sure that the TSR utilities are present
before DBASE.EXE is allowed to run. The sample EXERUN file
has one name "PRESET.COM" at the moment, but three names can
be placed here. Remove this name from the file when using
this option or your DBASE.EXE will not run. The name may be
in capital or small letters, because there is no need to be
case sensitive as was the case with passwords.
This may not seem very useful to you, but if you have a
program such as JLOCK.EXE (which can control which files can
be read/written, renamed, ran, etc), then you would want to
make sure that JLOCK.EXE is in memory. By having this name
in the EXERUN file, EXERUN.EXE will not allow you to run
DBASE.EXE unless JLOCK.EXE was also in memory and ran right
after EXERUN.EXE became memory resident.
The EXERUN file has space for up to three such names which
were ran right after EXERUN.EXE. The exact mechanism is
explained later in this document.
The EXERUN file can be set so that EXERUN.EXE will display a
message stating "Missing softwares". If not set, then
DBASE.EXE will only abort with "divide overflow". The
sample EXERUN file, last line, has the "d" of "abcd" so that
EXERUN.EXE will display the message.
CHANGING PROTECTION OPTIONS
The EXERUN.EXE as originally given to you can change the
protection options attached to each .EXE software so that
after you did
EXERUN P DBASE A B<ntr>
for anti-viracy and BIOS/DOS restriction, you can do
EXERUN P DBASE AC<ntr>
for anti-viracy and confirmation with a password, removing
the machine dependency restriction of option B.
To modify EXERUN.EXE with the "1" and "2" options, see below
under "SHORT CIRCUIT" which will short circuit the ability
to protect .EXE softwares or to modify a protected .EXE
software. The "0" ooption will lock in the passwords, so
that there is no need to have an EXERUN file which anyone
can peek into.
Note that the protection options A - D may be separated by
spaces or stuck together. However, if you stuck it with the
name of the software as in
EXERUN PDBASEAC<ntr>
then EXERUN.EXE will confuse this with a software name
called DBASEAC.EXE.
MISCELLANEOUS
EXERUN.EXE will not automatically search the PATH for the name
of your software if not in the default drive and
subdirectory. This is to prevent you from accidentally
changing the wrong copy of the same software in different
subdirectories. To change DBASE.EXE in C:\SUBDIR\BRANCH\,
EXERUN P C:\SUBDIR\BRANCH\DBASE A C<ntr>
If you find it cumbersome to type the colon ":" and the
backslash "\" is located far away on your AT or mislocated
on your PS/2, you can also type
EXERUN P C;/SUBDIR/BRANCH/DBASE A C<ntr>
and EXERUN.EXE will automatically change all the regular
slashes "/" with reverse (or back) slash "\" and replaces
the semicolon ";" with colon ":".
This option facilitates the use of batch files to change a
large number of .EXE softwares, since EXERUN.EXE has no
feature to use the wild card asterisk "*" to change all .EXE
softwares in a diskette or a subdirectory. Note that if it
did, EXERUN.EXE may accidentally change a software it should
not have touched.
The number of .EXE softwares which you can protect is not
limited by anything. If EXERUN.EXE found any .EXE software
which it cannot modify, then it will tell you so. This
version does not work with Turbo Basic, though by the time
you read this, we will soon have another version (used
internally) which will work. We left it out because Turbo
Basic will no longer be updated. No trouble seems to occur
with Microsoft ones.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Even if you protected your .EXE softwares, someone else with
another copy of EXERUN.EXE can remove all the protections
"A" through "D". To prevent such tampering, once you are
fixed on one set of protections for a given .EXE software,
EXERUN [P] DBASE D<ntr>
The square brackets surrounding the P option locks this so
that neither your copy, nor anyone else's copy of EXERUN.EXE
can change the protections you gave it. Since this
DBASE.EXE has the "D" option, it is dependent on a set of
other softwares which had to be ran right after EXERUN.EXE
became memory resident, before DBASE.EXE will run.
If you want to short circuit your copy of EXERUN.EXE so
that it will retain the ability to become memory resident,
but looses the ability to understand the P option, read up
later under "SHORT CIRCUIT". Remember to keep the original
non-short circuited copy of EXERUN.EXE somewhere safe.
Although you can run this program and the file off a floppy
diskette and then store the diskette in a safe place, if you
want to make the passwords permanent, such that it is
incorporated into the program and there is no need to read
the file, use the SHORT CIRCUIT "0" option.
Once the passwords are permanently within the
EXERUN.EXE program, EXERUN.EXE will write a code for
the passwords to each .EXE software which it will now
check. With this option, another person's EXERUN.EXE
and a EXERUN file will not work.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To run this, simply type
EXERUN RUN<ntr>
and end it with an <ENTER> or <ntr> or <cr> or anything
else you want to call the carriage return. All documents in
my programs use the <ntr> format.
You can type just the "R" in "RUN" to run EXERUN.EXE and may
be in capital "R" or small letter "r". Any other line
command after the "RUN" parameter is ignored, so if you want
to mix other line commands, they must be placed before this.
--------------------------------------------------------------
EXERUN.EXE itself and all programs hence forth lost the
self-wipe feature, the ability to wipe any and all other
memory resident programs loaded after this program.
(unless I start hearing otherwise)
--------------------------------------------------------------
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
SHORT CIRCUIT
LOCKING THE PASSWORDS INSIDE EXERUN.EXE (option 0)
If you do not want a copy of the EXERUN file which someone
can peek into, you can use the 0 option, which reads the
EXERUN file into the EXERUN.EXE program and makes it a
permanent part of the program itself. To do this
EXERUN 0<ntr>
This asks for a confirmation. Type "Y" or "y" to mean "Yes.
I want the passwords in the EXERUN file incorporated into
the program EXERUN.EXE so that I can erase the file.
Once the passwords from the EXERUN file are incorporated
within the EXERUN.EXE program itself, everytime you use the
"P" or the "[P]" option to protect .EXE softwares with the A
(anti-virus) or the B (BIOS/DOS/equip. match) not only will
the software file-size/date/time be checked, but the
password/filenames in the EXERUN at the time will also be
checked.
If you use the original EXERUN.EXE which you did not
use 0 with, this EXERUN.EXE will read the slightly (or
grossely) changed EXERUN, but because the software
knows that you changed the EXERUN file, it will not
run. (If you used "[P]", this .EXE software is lost
unless you wrote the passes somewhere. If you used "P",
then you can removing the A/B protections.)
Remember, once you use the "0" option, all .EXE
softwares which you now protect (with the "P" or "[P]"
and the A/B) will be given a code describing what the
EXERUN file (the copy stored inside EXERUN.EXE itself)
was. Neither your original EXERUN.EXE nor anyone
else's EXERUN.EXE will allow you to run your .EXE
software. Only the "0" modified EXERUN.EXE has the
code to run your software, if you should ever delete
the EXERUN file on purpose or accidentally. (If you
used P and A/B, you can remove the A/B options, but not
if you used the [P] and A/B.)
LOOSE ABILITY TO PROTECT SOFTWARES (option 1)
As it stands, although the EXERUN file can be hidden in
other subdirectories and protected with read-only or hidden
attribute using programs such as CLEARFIL.EXE, anyone can
use your EXERUN.EXE and remove any protection which you
placed on each .EXE software by writing a new protection
code over it. Note that you can lock .EXE softwares so that
neither your, nor anyone else's EXERUN.EXE can change
protections placed on your .EXE software using "[P]" above.
To prevent it, EXERUN.EXE has an option to short circuit
itself so that it can no longer protect .EXE software or
change one set of protections with another set.
MAKE SURE THAT YOU HAVE YOUR ORIGINAL COPY OF EXERUN.EXE
STORED SOMEWHERE ELSE!
EXERUN 1<ntr>
This short circuits the protection option so that it can
only become memory resident and do the chores associated
with whatever protections were required for each .EXE
softwares. This EXERUN.EXE can no longer modify .EXE
softwares.
If you try to use the protect option with this copy of
EXERUN.EXE, it will abort with a "divide overflow" error.
LOOSE ABILITY TO CHANGE PROTECTION TYPES (option 2)
EXERUN 2<ntr>
This does a partial short circuit so that you can still
continue to add the protection option to any .EXE software
which has not yet been given EXERUN.EXE dependency yet.
This copy of EXERUN.EXE can still modify .EXE softwares
which were not modified by EXERUN.EXE yet, but any .EXE
software which was already modified by EXERUN.EXE can no
longer be modified by this EXERUN.EXE.
Of course, if you protected a software with the "[P]"
option, this cannot change or remove the protections.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
HOW EXERUN.EXE WORKS
First, read on how to protect your .EXE softwares above and
protect them, making sure that you have unaltered copies of
your .EXE softwares kept in a far away place.
To run EXERUN.EXE, type from the DOS prompt
EXERUN RUN<ntr>
The first thing EXERUN.EXE does is to check to see if
another copy of EXERUN.EXE is already in memory or not. The
program will abort if it is already in memory.
Then it checks to see if a copy of your ascii text file
EXERUN (no extension given) is in the diskette or
subdirectory where you ran EXERUN.EXE.
If a copy exists, then the passwords and lists are read
to memory. If you like, use CLEARFIL.EXE, Norton
Utilities etc to change the file to read-only and
hidden and move it to a far away subdirectory (assuming
that you have a hard disk).
If a copy does not exist in the present diskette or
subdirectory, then the PATH is searched to find out if
the file can be found.
If a copy exists, then the version identification
value is checked to make sure that you have the
correct version to work with this program.
If no copy exists, then this program will abort
with a message.
The EXERUN file is read and checked for errors before
continuing. If there are errors, then EXERUN.EXE will
exit with an error message.
Now the environment area which has the PATH data is no
longer needed, so the area is deallocated and EXERUN.EXE
becomes memory resident. Most softwares which show a map of
the system memory used will know that something is in
memory, but not what it is.
Right after EXERUN.EXE becomes memory resident, it will note
the names of, and the order of up to three softwares which
were ran right after EXERUN.EXE became memory resident.
(you can use a batch file to automate this). These may be
.COM or .EXE softwares. If any protected .EXE software
depended on such softwares be ran first, EXERUN.EXE will
check them.
The sample EXERUN file has "PRESET.COM". If you want to use
the Dependency on TSRs option, replace it with your software
names.
Now try running a protected .EXE software. It will not run
without EXERUN.EXE in memory and it meets the protection
criteria you assigned to the .EXE software. Try
experimenting with protection options until you found one
combination which suits your need for the particular .EXE
software. Now use the "[P]" option to lock it.
EXERUN FILE REQUIREMENTS
You can read the explanation in the EXERUN file for a quick
explanation. Here is more detailed explanation.
The first line must have the numbers "00" on the very first
left column. This indicates the version number of this
EXERUN file for compatibility with any future version of
this program. This program looks for this to see if the
file which you have will run correctly with the program or
not. Attempt to change the version number with any other
valid values may cause some strange results, including
corruption of your disk or worse.
On the next 26 lines, the first TEN characters on each line
is the password to be used for all .EXE softwares which
require them (by running with the "EXERUN Pprogram.exe
C<ntr>" for Confirmation of pass). If your .EXE software
is called ZIWRITE.EXE, then the EXERUN file has the letter
"z" at the moment, so that you must type "z" followed by
<ntr> to run your software. If the EXERUN file had the
letters "z ", then you must type "z " followed by <ntr>.
Capitals and small letters are unique and individual, "Z"
is not the proper password for "z". If your software is
called "ABC.EXE", then because it begins with the letter "A"
of "ABC.EXE", the first row after the version number has
all softwares which begin with the letter A
uses password "all softwa"<ntr>
on one line. The first TEN characters or until a <ntr> is
the password for this software. Here, the first ten
characters is "all softwa", so it becomes the password.
Similarly, if you software is called "DYE.EXE", it uses the
fourth row (after the verision number row) as the password,
which is "x". If you rename the software to "CYE.EXE", then
the third row's password is used, which is "SOFT "<ntr>.
The next three lines contain the names of up to three
softwares (usually terminate but stay resident utilities
[TSRs]) which must be ran right after EXERUN.EXE. In these
three lines, place the names of up to three softwares, both
.COM and .EXE types. You must specify the ".COM" or ".EXE"
yourself. If a line begins with a space, then it is
considered the same as a blank comment. If it ends with a
space, then anything afterwards is considered a blank
comment as well. If it begins with a space, then it is a
comment also.
The sample EXERUN file has PRESET.COM is simply one of
our programs used in a MAKE-like file found in C
environment. It is not included in here.
Right after EXERUN.EXE itself becomes memory resident,
it will record the names of up to three softwares which
runs. If you had used "EXERUN PDBASE D" protection
option to Protect DBASE.EXE with Dependency on TSRs,
then DBASE.EXE will not run unless PRESET.COM (in this
case) was ran right after EXERUN.EXE became memory
resident.
The order in which the three names are in the EXERUN
file must be the order in which the three softwares are
ran right after EXERUN.EXE becomes memory resident: If
you had
PRESET.COM
JLOCK.EXE
SK.COM
in EXERUN file, but you did not run all of them or ran
them in a different order, then your DBASE.EXE will not
run at all.
The next line in EXERUN has the letters "abcd" at the
moment.
If you used "EXERUN P DBASE A" to add the anti-virus
attribute to DBASE.EXE and EXERUN.EXE found that
DBASE.EXE's file size or date/time was changed, then
the presence of the letter "a" in the EXERUN file
above causes EXERUN.EXE to produce the message
"Software changed!". If the letter "a" was not in the
EXERUN file, then no message will appear before
DBASE.EXE aborts.
If you used "EXERUN P DBASE B" to add the BIOS/DOS
restriction to DBASE.EXE and EXERUN.EXE found that
DBASE.EXE's file size, date/time or BIOS/DOS/equipment
of the computer was changed, then the presence of the
letter "b" in the EXERUN file above causes EXERUN.EXE
to produce the message "Bad match!". If the letter "b"
was not in the EXERUN file, then no message will
appear before DBASE.EXE aborts.
If you used "EXERUN P DBASE C" to add confirmation of a
password, then before DBASE.EXE runs, you will get the
prompt "Pass "<-cursor here
to indicate that a password is being expected now. If
the letter "c" is not in the EXERUN file, then you get
no warning that a password is being expected.
If you used "EXERUN P DBASE D" to add dependency on
TSRs and the list of softwares which you ran right
after EXERUN.EXE became memory resident does not match
the order or the number stored in the EXERUN file, then
you will get the message "Missing softwares" to tell
you that required softwares were not ran. If the
letter was not present, then you get no warning before
DBASE.EXE aborts.
If you have any other letters, other than spaces, then
you will get an error message that EXERUN had an error
and EXERUN.EXE will not become memory resident.
The letters were typed as "abcd", but they could have
been "ABCD" or "aBcD" or any other combinations of
capital and small letters, because unlike passwords,
there is no need to be picky about it.
FOOTNOTE
Does this program guarantee absolute safety? No. As Adobe,
Lotus and others have found out, any determined person with
a good knowledge of assembly can hack his or her way
through any software or even hardware conceived by anyone
else. But it will act as a good barrier for most of us who
do not have both an evil intentions AND a good knowledge of
assembly. Remember, new laws coming into being make
intentional act of vandalism on any software a criminal
offense.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
CHAT in a HAT
Sure we do consultation, from simple training to big
projects, which don't mean much: There are people who don't
know much about PC, writing newspaper columns and (non-
computer) magazine articles about PC. Can't their editors
find people who know about PC, or they just want to keep
you ignorant? My offer to be a writer for one still stands
anyone, irregardless of how big or small a newspaper or
magazine, whether you're the editor or a guy who decided to
apply me to the personnel office of a publisher. I dare it.
(I'm sure & safe in saying that it'll fall on deaf ears.)
The HDTV is a Jpns project which the Am./Euro. are copying
(A is using 1050 line mode, which J abandoned). The genome
project is a J thing which A/E are copying w/more $. Plastic
conductors (made accidentally in J, and the related super-
conductors) is what A is copying. Since J did so great
improving upon things started by others (like Thomas Edison
who improved on [not discovered] phonograph, etc), will A/E
do just as well on things started by J?
There is a talk about how the powerlines may cause leukemia.
Many years ago, I published a paper on how plain visible
light can be harmful to life. I never published the results
of the experiment using the effect of electric wires because
preliminary results were inconclusive. Darn.
Have you seen Houston, Texas? BIG city blocks and lots of
BIG parked cars, but NO people 7 days a week, except for a
mugger or three on the street (I was very too far away to
help the muggees). A better name may be Ghoston.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
PROMPTS AND MESSAGES WHEN RUNNING THE PROGRAM
=-=-=
Oh oh. Compilation error found
=-=-=
This program was not compiled properly. The short circuit
options will not work. Notify us if this happens.
=-=-=
Unknown parameter on the command line
=-=-=
Something not recognized was found on the line when you ran
the program. If you ran this program from a batch command
file, error messages are followed by errorlevel = 1 so that
you can have your batch file take appropriate actions.
=-=-=
You don't have to do it, EXERUN is already in memory
=-=-=
You tried to run EXERUN.EXE when a copy was already in
memory.
=-=-=
The EXERUN file not found anywhere.
=-=-=
The file was not in default or accessible through PATH.
=-=-=
EXERUN exists but I cannot open it.
=-=-=
The file was found, but something prevented it from being
read. Do you have some read-prevention utility?
=-=-=
I was not allowed to read EXERUN
=-=-=
The file with the passwords and file names could not be
was found, but some reason other than not being able to open
it prevented it from being read.
=-=-=
The EXERUN file is less than 100 bytes in length
=-=-=
The file is too short to have useful data. Try typing it to
screen and see what it contains.
=-=-=
Incorrect version number of EXERUN
=-=-=
The EXERUN file's version number was tampered or is not
compatible with the EXERUN.EXE which you are using.
=-=-=
The EXERUN file does not have all the lines needed
=-=-=
While parsing (checking) through the file, it was found that
it did not contain enough lines of passwords or names to
satisfy the requirements.
=-=-=
Bad request types for message: A - D allowed
=-=-=
The EXERUN file last line should have "A" - "D" for allowing
messages in case of error in running your .EXE software.
You had something else on the line, other than spaces.
WHEN READING A .EXE SOFTWARE TO ADD/CHANGE PROTECTION
=-=-=
No such software found.
=-=-=
The .EXE software was not found.
=-=-=
This is not a real .EXE software
=-=-=
A software with the .EXE extension was found, but it did not
have a .EXE signature, indicating that it is something else
renamed to have a .EXE extension only.
=-=-=
The software exists, but there is no read/write access.
=-=-=
Do you have your .EXE software set for read only? Use
Norton Utilities, CLEARFIL.EXE etc to change it to regular
file attribute.
=-=-=
Unknown error. Software cannot be read.
=-=-=
The .EXE to protect was found but some unknown cause
prevents it from being read.
=-=-=
Sorry. This software has no place for EXERUN.EXE.
=-=-=
There was no space in this .EXE software for EXERUN.EXE, or
this was locked to prevent changing the protection options.
=-=-=
I need the name of a .EXE software
=-=-=
You used the Protect option as in
EXERUN P<ntr>
when you should have had something like
EXERUN P dbase<ntr>
since this option is designed to change the .EXE software
into something which will not run without EXERUN.EXE.
This option does not search the PATH to locate the .EXE
software. This is not a bug. It was designed this way so
that if you have multiple copies of a .EXE software, it does
not modify the first such software on PATH. To modify
DBASE.EXE in C:\LEVEL1\LEVEL2, either type
EXERUN P C:\LEVEL1\LEVEL2\DBASE<ntr>
or
EXERUN P C;/LEVEL1/LEVEL2/DBASE<ntr>
EXERUN.EXE will translate any semicolon ";" to a colon":",
and a regular slash "/" to a back (or reverse) slash "\".
=-=-=
The software was modified.
=-=-=
The .EXE software was protected or changed protection type.
=-=-=
LOCKED!
=-=-=
You used the "EXERUN [P]DBASE BC" locking protection to
prevent changes to the protection types "bc", in this case.
=-=-=
Bad coding type: The allowed types are
A to check Attributes filesize, date/time
B to check "A" plus BIOS and equipment match
C to request password Check
D Detect if other softwares (e.g. TSR) already ran
=-=-=
You followed the P option and .EXE software name with
something other than A - D.
=-=-=
Changing existing settings
=-=-=
Former protection options are replaced by new ones. This is
a warning that there was protection options already set for
this software from another time.
=-=-=
A newer, later version of EXERUN.EXE is needed to change this
=-=-=
The .EXE software was changed by a later version of
EXERUN.EXE than this and is not compatible.
WHEN CHANGING PROTECTION
=-=-=
Already has short circuit 0 in effect
=-=-=
The passwords are already inside the program. To change the
passwords, you must use a copy of the program which was not
yet changed.
=-=-=
CHANGED! Passwords included
=-=-=
The passwords are inside the program. Now everytime you
protect a software, the code for the passwords is also
included and EXERUN.EXE will check to see if it matches the
one it has.
=-=-=
Change this so that passwords are locked? (Y/N)
=-=-=
You requested short circuit type 0 to lock the passwords
in the program itself. Type "Y" or "y" to mean "Yes. I
want it done." Anything else is taken as "NO. I didn't
mean to do this.". Once the passwords are inside the
program, EXERUN.EXE will load a code for this passwords into
each .EXE software you use "P" or "[P]" on, so that another
EXERUN.EXE and its passwords in its EXERUN file will not
affect this.
=-=-=
Change this so that no protection feature possible? (Y/N)
=-=-=
You requested that short circuit type 1 to remove all
protection be removed so that EXERUN.EXE can only become
memory resident. Type "Y" or "y" to mean "Yes. I want it
done." Anything else is taken as "NO. I didn't mean to do
this.".
=-=-=
Change this so that protected .EXE cannot be changed? (Y/N)
=-=-=
You requested that short circuit type 2 to remove the
ability to change a .EXE which was already protected. Type
"Y" or "y" to short circuit the EXERUN.EXE.
To prevent neither your original or anyone else's original
copy of EXERUN.EXE from changing the protection options, use
the "EXERUN [P]filename".
=-=-=
Not changed.
=-=-=
At either of the above prompts, you type something other
than "Y" or "y" so that EXERUN.EXE aborted without doing
anything.
=-=-=
EXERUN.EXE is not here
=-=-=
You used the short circuit option 1 or 2, but you ran
EXERUN.EXE by letting DOS find it through the PATH, so the
program was not in the default diskette or subdirectory
where you typed it. EXERUN.EXE will not search the PATH
when short circuiting itself, so you must run this while
EXERUN.EXE is in the default working diskette or
subdirectory.
=-=-=
EXERUN.EXE cannot be read/written
=-=-=
You probably had a read only setting on EXERUN.EXE so that
it cannot be written. Use CLEARFIL.EXE or others to remove
the setting.
=-=-=
I cannot read EXERUN.EXE
=-=-=
Something unknown is preventing EXERUN.EXE from being read
for short circuiting.
=-=-=
CHANGED! No more protection option.
=-=-=
Short circuit 1 to remove EXERUN.EXE's ability to protect
.EXE softwares or change protection was implimented.
=-=-=
CHANGED! No more changing protected .EXEs
=-=-=
Short circuit 2 to remove EXERUN.EXE's ability to change
protection options was implimented. This EXERUN.EXE can
still protect .EXE softwares which were never touched by
EXERUN.EXE.
=-=-=
Already changed
=-=-=
The short circuiting was already done.
WHEN RUNNING YOUR .EXE SOFTWARE
=-=-=
Software changed!
=-=-=
The file length or date/time of the .EXE software was
changed by something. Your EXERUN file's last line has the
letter "a" of "abcd" to indicate that you want a message in
case something like this happens.
=-=-=
Bad match!
=-=-=
The file length or date/time of the .EXE software was
changed or the BIOS/DOS/equipment listings no longer match.
Usually, this means that you tried to run your .EXE software
on a computer other than the one you gave it protection on.
Your EXERUN file's last line has the letter "b" of "abcd" to
indicate that you want a message in case something like this
happens.
=-=-=
Pass
=-=-=
A password is required. The EXERUN file's last line has the
letter "c" of "abcd" to indicate that you want this prompt
to appear. Otherwise, there is no prompt to indicate that
a password is being requested.
=-=-=
Missing softwares
=-=-=
The EXERUN file had a list of softwares (usually TSRs) which
should have been ran right after EXERUN.EXE became memory
resident (usually inside a batch file). The EXERUN file's
last line has the letter "d" of "abcd" to indicate that you
want this prompt to appear.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
All products and names mentioned are Trademarks or
Registered Trademarks of their respective corporations or
companies. That includes my group or any other group's
programs, of course. Some products may have patent
protections as well.
All enclosed programs, documents and other files are
provided AS IS, without any warranty, expressed or implied,
including but not limited to fitness for a particular
purpose.
A contribution of $10 US/Canadian is appreciated if you
find this useful, or $20 for an improved one as it comes out.
($20 Cdn if you're in Canada and $20 U.S. for U.S & others,)
Unless you specify otherwise, you will get a 5-1/4" 360 kb
diskette. And if you only specify 3-1/2", it will be
formatted as 360kb/720kb on a 720kb or a 1.44Mb drive. The
above statement may not apply in some countries if there is
a local dealer who handles such things as a non-shareware.
NAME OF THE PROGRAM: EXERUN.EXE ($10-$20)
PURPOSE OF THIS PROGRAM:
This modifies your .EXE softwares so that they will not run,
unless EXERUN.EXE is in memory. When in memory, this can
1) check if file size or date/time was changed.
2) check above + if BIOS and DOS changed.
3) request password.
4) check if other required softwares, such as TSR utilities
were already ran.
my old forwarding address was
Dr. Masaaki Sawada
University of Waterloo, Faculty of Science
Waterloo, Ontario Canada N2L 3G1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Now, contact
c/o Dr. Masaaki Sawada
LCS
P.O. Box 956
Outremont, Quebec
Canada H2V 4R8
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
----------------end-of-author's-documentation---------------
Software Library Information:
This disk copy provided as a service of
The Public (Software) Library
We are not the authors of this program, nor are we associated
with the author in any way other than as a distributor of the
program in accordance with the author's terms of distribution.
Please direct shareware payments and specific questions about
this program to the author of the program, whose name appears
elsewhere in this documentation. If you have trouble getting
in touch with the author, we will do whatever we can to help
you with your questions. All programs have been tested and do
run. To report problems, please use the form that is in the
file PROBLEM.DOC on many of our disks or in other written for-
mat with screen printouts, if possible. The P(s)L cannot de-
bug programs over the telephone.
Disks in the P(s)L are updated monthly, so if you did not get
this disk directly from the P(s)L, you should be aware that
the files in this set may no longer be the current versions.
For a copy of the latest monthly software library newsletter
and a list of the 2,000+ disks in the library, call or write
The Public (Software) Library
P.O.Box 35705 - F
Houston, TX 77235-5705
(713) 665-7017
