home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Power-Programmierung
/
CD1.mdf
/
apl
/
tryapl2
/
archives
/
read.me
next >
Wrap
Text File
|
1991-10-21
|
2KB
|
51 lines
TryAPL2 - Copyright 1991 IBM CORP, All rights reserved.
To install TryAPL2 to a hard disk:
- create a directory on the hard disk. For example:
md tryapl2
- make your new directory the current directory. For example:
cd tryapl2
- insert the TryAPL2 disk in drive A and execute the following:
copy a:contract
copy a:read.me
a:tryapl2a
a:tryapl2b
a:tryapl2c
- if you want to restore the LaserJet formatted documentation
(on disk 2 of the 5.25" set), insert the TryAPL2 disk
in drive A and execute the following:
a:tryapl2d
To install TryAPL2 on a floppy disk:
- make the floppy drive the current drive. For example:
b:
- insert the TryAPL2 disk in drive A and execute the following:
a:tryapl2a
a:tryapl2b
a:tryapl2c
NOTE: If you install to 360K disks, you must change disks between
the above steps.
NOTE: The files from tryapl2d are documentation for printing
on HP LaserJet printers, are very large, and are not required
required for execution.
To run TryAPL2 from a hard disk:
- Make active the directory containing TryAPL2 and enter the following:
tryapl2
To run Tryapl2 from a floppy disk,
- insert the first or only TryAPL2 disk that you created into drive A
and execute the following:
tryapl2
NOTE: You can run from a single 360K disk using the files on
tryapl2a. You will need to change the disk to tryapl2b
after TryAPL2 is running to access workspaces other
than TRYDOC. To run TRYDOC, )LOAD with disk 1 inserted
then switch to disk 3 before selecting a topic for viewing.