home *** CD-ROM | disk | FTP | other *** search
/ Stars of Shareware: Animation & Sound / SOS-ANIM_SOUND.ISO / best_50 / shez99.zip / SHEZ.DOC < prev    next >
Text File  |  1994-04-20  |  201KB  |  4,388 lines

  1.  
  2.  
  3.                                          SHEZ
  4.                               The Compression Companion
  5.                                Copyright (c) 1989-1994
  6.                                      Release 9.9
  7.                               California Software Design
  8.                                     April 19, 1994
  9.                                     By:  Jim Derr
  10.  
  11.  
  12.                                   TABLE OF CONTENTS
  13.  
  14.  
  15.         LIMIT OF LIABILITY  . . . . . . . . . . . . . . . . . . . . . . . .  3
  16.  
  17.  
  18.         ADDITIONAL PROGRAMS NEEDED  . . . . . . . . . . . . . . . . . . . .  5
  19.  
  20.  
  21.         QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
  22.  
  23.  
  24.         COMMAND LINE OPTIONS  . . . . . . . . . . . . . . . . . . . . . . .  8
  25.  
  26.  
  27.         MOUSE SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
  28.  
  29.  
  30.         ZOOMING DIRECTORY WINDOW WITH MOUSE . . . . . . . . . . . . . . . . 10
  31.  
  32.  
  33.         USING THE MOUSE WITH VERN BUERG'S LIST PROGRAM. . . . . . . . . . . 15
  34.  
  35.  
  36.         INTERNAL QUICK-VIEWER . . . . . . . . . . . . . . . . . . . . . . . 15
  37.  
  38.  
  39.         EDITING KEY DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . 15
  40.  
  41.  
  42.         FUNCTION SUPPORTED WHEN A DOS DIRECTORY WINDOW IS DISPLAYED . . . . 16
  43.  
  44.  
  45.         NOTES ON CREATING SFX FILES . . . . . . . . . . . . . . . . . . . . 18
  46.  
  47.  
  48.         FUNCTIONS WHEN VIEWING CONTENTS OF ARCHIVE FILE:  . . . . . . . . . 27
  49.  
  50.  
  51.         OPTIONS AVAILABLE ONLY VIA THE MENU SYSTEM  . . . . . . . . . . . . 37
  52.  
  53.  
  54.         VOLUME LABEL SUPPORT  . . . . . . . . . . . . . . . . . . . . . . . 39
  55.  
  56.  
  57.         FLOATING EXTRACT LOCATION . . . . . . . . . . . . . . . . . . . . . 39
  58.  
  59.  
  60.         Ultravision Support . . . . . . . . . . . . . . . . . . . . . . . . 40
  61.  
  62.  
  63.         FORMATTING FLOPPIES . . . . . . . . . . . . . . . . . . . . . . . . 40
  64.  
  65.  
  66.         KEYSTROKE RECORDING/PLAYBACK FACILITY . . . . . . . . . . . . . . . 41
  67.  
  68.  
  69.         CREATING NEW COMPRESSED FILES . . . . . . . . . . . . . . . . . . . 44
  70.  
  71.  
  72.         CONVERTING FILES  . . . . . . . . . . . . . . . . . . . . . . . . . 45
  73.  
  74.  
  75.         SUPPORT FOR SELF EXTRACTING FILES . . . . . . . . . . . . . . . . . 46
  76.  
  77.  
  78.         ENVIRONMENT VARIABLES . . . . . . . . . . . . . . . . . . . . . . . 47
  79.  
  80.  
  81.         SETTING ALTERNATE FILE VIEWERS  . . . . . . . . . . . . . . . . . . 49
  82.  
  83.  
  84.         SETTING USER DEFINED PRINTER  . . . . . . . . . . . . . . . . . . . 49
  85.  
  86.  
  87.         SETTING UP USED DEFINED MENU ENTRIES  . . . . . . . . . . . . . . . 49
  88.  
  89.  
  90.         PERFORMING A VIRUS SCAN . . . . . . . . . . . . . . . . . . . . . . 49
  91.  
  92.  
  93.         VIRUS SCANNING A DIRECTORY  . . . . . . . . . . . . . . . . . . . . 50
  94.  
  95.  
  96.         THE SGREP PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 52
  97.  
  98.  
  99.         THE DUMPMAC PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . 54
  100.  
  101.  
  102.                                   TABLE OF CONTENTS
  103.  
  104.  
  105.         THE SHEZCFG PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . 55
  106.  
  107.  
  108.         CONFIGURING FOR VIRUS SCANNING  . . . . . . . . . . . . . . . . . . 55
  109.  
  110.  
  111.         COMPATIBILITY ISSUES  . . . . . . . . . . . . . . . . . . . . . . . 55
  112.  
  113.  
  114.         DESQVIEW COMPATIBILITY  . . . . . . . . . . . . . . . . . . . . . . 56
  115.  
  116.  
  117.         WINDOWS AND OS/2 COMPATIBILITY  . . . . . . . . . . . . . . . . . . 56
  118.  
  119.  
  120.         SWAPPING SHEZ OUT OF MEMORY . . . . . . . . . . . . . . . . . . . . 57
  121.  
  122.  
  123.         USING EMS/XMS MEMORY IN SHEZ  . . . . . . . . . . . . . . . . . . . 57
  124.  
  125.  
  126.         SPEECH FRIENDLY INTERFACE . . . . . . . . . . . . . . . . . . . . . 59
  127.  
  128.  
  129.         4DOS AND NDOS SUPPORT . . . . . . . . . . . . . . . . . . . . . . . 59
  130.  
  131.  
  132.         USING 4DOS INTERNAL LIST COMMAND  . . . . . . . . . . . . . . . . . 60
  133.  
  134.  
  135.         SUPPORT FOR SPANNED ZIP FILES . . . . . . . . . . . . . . . . . . . 61
  136.  
  137.  
  138.         SUPPORT FOR UC2 COMPRESSED FILES  . . . . . . . . . . . . . . . . . 61
  139.  
  140.  
  141.         WHERE TO FIND THE MOST CURRENT VERSION  . . . . . . . . . . . . . . 62
  142.  
  143.  
  144.         OVERSEAS AGENT  . . . . . . . . . . . . . . . . . . . . . . . . . . 62
  145.  
  146.  
  147.         SUPPORT FOR SHEZ AND QUESTIONS  . . . . . . . . . . . . . . . . . . 64
  148.  
  149.  
  150.         COMMANDS SORTED BY DESCRIPTION  . . . . . . . . . . . . . . . . . . 65
  151.  
  152.  
  153.         CORPORATE SITE LICENSING FOR SHEZ . . . . . . . . . . . . . . . . . 67
  154.  
  155.  
  156.         APPENDIX - 1 - ERROR CODES  . . . . . . . . . . . . . . . . . . . . 68
  157.  
  158.              ERROR CODES WHEN ATTEMPTING TO SWAP  . . . . . . . . . . . . . 68
  159.  
  160.              PKZIP ERROR CODES  . . . . . . . . . . . . . . . . . . . . . . 68
  161.  
  162.              PKUNZIP ERROR CODES  . . . . . . . . . . . . . . . . . . . . . 68
  163.  
  164.              ARJ ERROR CODES  . . . . . . . . . . . . . . . . . . . . . . . 70
  165.  
  166.              LHARC ERROR CODES  . . . . . . . . . . . . . . . . . . . . . . 70
  167.  
  168.              PKUNPAK ERROR CODES  . . . . . . . . . . . . . . . . . . . . . 70
  169.  
  170.              PAK ERROR CODES  . . . . . . . . . . . . . . . . . . . . . . . 70
  171.  
  172.              ERROR CODES WHEN FORMATTING A DISK . . . . . . . . . . . . . . 71
  173.  
  174.  
  175.         CRITICAL SYSTEM ERROR CODES . . . . . . . . . . . . . . . . . . . . 71
  176.  
  177.  
  178.         APPENDIX -2- SHEZ.INI FILE  . . . . . . . . . . . . . . . . . . . . 72
  179.  
  180.  
  181.         INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
  182.  
  183.  
  184.                                  LIMIT OF LIABILITY
  185.  
  186.         SHEZ is distributed as-is.  The author disclaims all warranties,
  187.         expressed or implied.  The author will assume no liability for damages
  188.         either from the direct use of this product or as a consequence of the
  189.         use of this product.
  190.  
  191.  
  192.  
  193.                                    SHEZ USER MANUAL                   PAGE -4-
  194.  
  195.  
  196.         SHEZ is a shell program to make viewing and working with archive files
  197.         user friendly.  It provides the user with a friendly, consistent
  198.         interface for all supported compressed file operations.
  199.  
  200.  
  201.  
  202.                                    SHEZ USER MANUAL                   PAGE -5-
  203.  
  204.  
  205.                               ADDITIONAL PROGRAMS NEEDED
  206.  
  207.  
  208.         You will need, at a minimum, at least one file compression program,
  209.         and optionally a file browser program.  Vern Buerg's LIST program is
  210.         an excellent, full featured file browser program, and has been
  211.         thoroughly tested with SHEZ.  You will also need one of the file
  212.         compression programs supported by SHEZ.  These include PKZIP, PAK,
  213.         ARJ, LZH or LHA, PKPAK, ZOO, SQZ, and UC2.  When installing these
  214.         required programs, be sure to install them into a directory that is in
  215.         your path statement.  If you are installing the PKZIP package be sure
  216.         to install the following three programs:  PKZIP.EXE, PKUNZIP.EXE, and
  217.         ZIP2EXE.EXE.
  218.  
  219.  
  220.         All of the programs mentioned in this section, with the exception of
  221.         Central Point Software Virus Scan, can be found on most Bulletin
  222.         Boards, and on Cserve.  They are all available on the Directory
  223.         Assistance BBS that is mentioned at the end of this document.
  224.  
  225.         PKZIP, PKUNZIP by Phil Katz for ZIP files.
  226.         PKUNPAK, PKPAK by Phil Katz for ARC files.
  227.         LHARC, LHA by Haruyasu Yoshizaki for LZH files.
  228.         ZOO by Rahul Dhesi for ZOO files.
  229.         PAK by NoGate Consulting for PAK files.
  230.         ARJ by Robert Jung for ARJ files.
  231.  
  232.  
  233.         PKWARE, INC.                       LIST.COM by Vernon Buerg
  234.         7545 N Port Washington Rd.         139 White Oak Circle
  235.         Glendale, WI. 53217                Petaluma, CA. 94952
  236.                                            (707) 778-8841 - BBS
  237.  
  238.         PAK by NoGate Consulting           ARJ by Robert Jung
  239.         P.O. Box 88115                     2606 Village Road West
  240.         Grand Rapids, Mi 49518-0115        Norwood, Mass. 02062
  241.  
  242.         If you want to use the virus scan option of SHEZ you will also need
  243.         the virus scan program by McAfee Associates called SCAN.EXE.  The SCAN
  244.         program from McAfee Associates has been extensively tested with SHEZ
  245.         and is highly recommended.  This program can be found on most major
  246.         BBS's or you may obtain it by calling the McAfee BBS. You must obtain
  247.         version 39 or greater of this program in order for SHEZ to use it
  248.         correctly.
  249.  
  250.         McAfee Associates
  251.         4423 Cheeney St.
  252.         Santa Clara, Ca. 95054
  253.         (408) 988-3832
  254.         BBS (408) 988-4004
  255.  
  256.         The virus scanning program from Central Point Software has also been
  257.         tested with SHEZ.
  258.  
  259.  
  260.  
  261.                                    SHEZ USER MANUAL                   PAGE -6-
  262.  
  263.  
  264.                                      QUICK START
  265.  
  266.         Installing SHEZ is a very straight forward procedure, simply copy or
  267.         extract from the compressed file, all the .EXE, .COM, and the SHEZ.HLP
  268.         files into a directory that is defined in your DOS PATH.  Optionally
  269.         you may create a new directory to hold the SHEZ files.  If you choose
  270.         this option you must either add the new directory name to your DOS
  271.         PATH, or ALWAYS start SHEZ from the new directory.
  272.  
  273.         After installing the files run the SHEZ configuration program. At the
  274.         DOS prompt type in SHEZCFG and press the enter key.  The configuration
  275.         program is menu driven with full help screen available for each
  276.         option.
  277.  
  278.         THE SHEZCFG PROGRAM MUST BE USED TO CREATE AN EXTERNAL CONFIGURATION
  279.         FILE.  SHEZ WILL NOT RUN WITHOUT A CONFIGURATION FILE!!!!!
  280.  
  281.         To start-up SHEZ simply enter "SHEZ [d:\path\filespec]".  You may
  282.         specify wild cards in the filespec. If you use wild cards in the
  283.         filespec SHEZ will present you with a scrollable list of files that it
  284.         found matching the filespec. SHEZ recognizes the special
  285.         filename.fileext of $.$.  If you specify a filespec of $.$ SHEZ will
  286.         list only the files having an extension of .ARC, .ZIP, .LZH, .ARJ,
  287.         .ZOO, .SQZ, and .UC2 or the files having extension matching the
  288.         extensions that where set using the configuration program. SHEZ will
  289.         also recognize just the $ file extension along with a DOS wildcard
  290.         filename. For example if you start SHEZ by entering SHEZ C:\UTY\P*.$
  291.         SHEZ will display a list of files that have a filename beginning with
  292.         the letter P and that have a file extension of
  293.         .ARC,.ZIP,.LZH,.ZOO,.PAK,.ARJ.SQZ.UC2, or what ever you set the
  294.         extensions to using the config. program.
  295.  
  296.         You may also start SHEZ and specify a sub-directory name of the
  297.         directory you are currently in.  For example, if you are currently in
  298.         the C:\UTILITY directory and you want to work on the files in the
  299.         C:\UTILITY\PGMS directory start SHEZ by entering the following: SHEZ
  300.         PGMS\
  301.  
  302.         Also included in the file list will be any directories that SHEZ
  303.         found.  The directory names will be enclosed in greater than and less
  304.         than symbols. I.E. <DIR1>.  You can position the highlight bar on a
  305.         directory name and press the enter key to view the files and
  306.         directories that are contained in that directory.  To move up one
  307.         level in the directory tree highlight the directory entry that appears
  308.         as <..>.  As you change directories the full disk:\pathname will be
  309.         displayed on the main screen.  In addition the disk:\path that will
  310.         receive extracted files is also displayed on the main screen. You can
  311.         than choose the file you wish to work on by moving the highlight bar
  312.         with the cursor keys and pressing the enter key. SHEZ will then
  313.         present you with a screen showing the contents of the archive file.
  314.  
  315.         To perform a function, simply position the highlight bar and press the
  316.         key(s) that corresponds to the function you want to perform on that
  317.         member.  Pressing the F1 key will open a window giving you context
  318.         sensitive help.
  319.  
  320.         SHEZ also has a built-in menuing system. To activate the menu system
  321.         press the forward slash key.  A menu bar will appear at the top of the
  322.         screen. Using the left and right cursor keys you may select major menu
  323.  
  324.  
  325.  
  326.                                    SHEZ USER MANUAL                   PAGE -7-
  327.  
  328.  
  329.         item. Press the enter key to view the choices under the menu item.
  330.         Using the up and down cursor keys you may choose an action item and
  331.         then press the enter key to perform that item.  Pressing the ESC key
  332.         will take you back one level.  Keep pressing the ESC key to exit the
  333.         menu system.
  334.  
  335.         There are two functions that can only be activated via the menuing
  336.         system. Printing a file contained in an archive file, and setting the
  337.         default compressing factor.  There are no hot keys associated with
  338.         these functions.
  339.  
  340.         SHEZ will optionally swap 90% of its code out of memory when you:
  341.  
  342.         1)   Shell to DOS
  343.         2)   Execute the edit function.
  344.         3)   Run a program contained in a compressed file.
  345.  
  346.         This allows you to run most programs from within SHEZ without running
  347.         out of memory.  The default for SHEZ is not to use this swapping
  348.         function.  However this can be changed via the configuration program.
  349.         The swapping function will swap as much of SHEZ as possible out of DOS
  350.         memory and into either EMS (3.2 or 4.0), XMS memory, if available, or
  351.         to the currently active default disk.
  352.  
  353.         PLEASE NOTE: IF YOU ARE RUNNING A SYSTEM WITHOUT A HARD DISK OR
  354.         WITHOUT EMS or XMS MEMORY DO NOT ACTIVATE THIS OPTION.
  355.  
  356.  
  357.  
  358.                                    SHEZ USER MANUAL                   PAGE -8-
  359.  
  360.  
  361.                                  COMMAND LINE OPTIONS
  362.  
  363.         The command line format when starting SHEZ is as follows:
  364.  
  365.              SHEZ [filespec] [/Exxx] [/PLAY=xxx] [/LCD] [/Cfilespec] [/4]
  366.  
  367.         Please note all command line options are optional.  You may enter a
  368.         filespec pattern for SHEZ to use when searching for a file. All legal
  369.         DOS wild card specifies are allowed, as are Drive and Directory
  370.         information.
  371.         In addition relative pathnames may also be entered on the command
  372.         line.
  373.         For example:
  374.              SHEZ C:\UTY\*.ZIP
  375.              This will startup SHEZ and will only list the files on the C:
  376.         drive in the UTY directory that have a file extension of .ZIP.
  377.  
  378.              SHEZ ..\DATA\*.*
  379.              This will startup SHEZ and will list the files one directory back
  380.              from the \DATA directory.
  381.  
  382.  
  383.         The /E parameter tells SHEZ to set its default extract location to the
  384.         Drive and directory specified immediately following the /E parameter.
  385.         DO NOT ENTER A SPACE AFTER THE /E parameter.
  386.         I.E. /EC:\WORK   This specifies an extract location of the E: drive
  387.         and the WORK directory.
  388.         If you start SHEZ with this parameter it will over-ride all other
  389.         default extract location.  Once SHEZ is started you may alter the
  390.         extract location by using the ALT-P command.
  391.  
  392.         The /LCD parameter tells SHEZ you are running SHEZ on an LCD display
  393.         monitor.  SHEZ will adjust its screen color set to make the display
  394.         more readable on LCD displays.
  395.  
  396.         The /PLAY= parameter tells SHEZ to load the previously saved macro
  397.         file and playback the recorded keystrokes immediately upon startup. If
  398.         the macro file does not exist, SHEZ will ignore the request.
  399.  
  400.         Example:  SHEZ C:\UTY\*.ZIP /PLAY=C:\DATA\MY.MAC
  401.  
  402.         This will start SHEZ looking in the C:\UTY directory for all files
  403.         with an extension of .ZIP and will playback the recorded keystrokes
  404.         contained in the file C:\DATA\MY.MAC.
  405.  
  406.         For more information on keystroke recording and playback see the
  407.         section KEYSTROKE RECORDING/PLAYBACK FACILITY on page 41 later in this
  408.         document.
  409.  
  410.         The /C parameter allows you to specify the location of the SHEZ
  411.         configuration file on the command line.  The filespec immediately
  412.         following the /c will be used as the configuration file.  This will
  413.         over-ride the SHEZCFG environment variable if it has been specified.
  414.  
  415.         The /4 parameter allows you to activate the 4DOS description display
  416.         via the command line.
  417.  
  418.  
  419.                                    SHEZ USER MANUAL                   PAGE -9-
  420.  
  421.  
  422.                                     MOUSE SUPPORT
  423.  
  424.         Shez offers full mouse support in any of it's supported screen modes.
  425.         When mouse support is active a mouse action bar will appear on the
  426.         last line of the display.
  427.  
  428.         LEFT-MOUSE-BUTTON
  429.  
  430.              Pressing or releasing the left mouse button on one of the action
  431.              items will perform the action as described below. If there is a
  432.              Yes under the REPEATABLE column, this indicates that the action
  433.              will repeat as long as the left mouse button is held down.  All
  434.              the actions shown on the action bar are active anywhere within
  435.              SHEZ.
  436.  
  437.  
  438.         ACTION-ITEM    ACTION         WHEN      REPEATABLE?
  439.         []            Scroll-up      Button-down    Yes
  440.         []            Scroll-down    Button-down    Yes
  441.         []            Scroll-left    Button-down    Yes
  442.         []            Scroll-right   Button-down    Yes
  443.         [PUp]          Page-up        Button-down    Yes
  444.         [PDn]          Page-down      Button-down    Yes
  445.         [Enter]        Enter-key      Button-release No
  446.         [Esc]          Escape-key     Button-release No
  447.         [MM]           Mouse-Menu     Button-release No
  448.         [Sp]           Space-key      Button-down    Yes
  449.         [Y]            Y-key          Button-release No
  450.         [N]            N-key          Button-release No
  451.         [F9]           F9-key         Button-release No
  452.         [Help]         Help           Button-release No
  453.         [Home]         Home-key       Button-release No
  454.         [End]          End-key        Button-release No
  455.         [Exit]         Exit-Shez      Button-release No
  456.         [Tab]          Tab-key        Button-release No
  457.  
  458.              In addition any item on the function key line can be selected by
  459.              positioning the mouse cursor on the desired function key and
  460.              pressing and releasing the left mouse button.
  461.  
  462.  
  463.         RIGHT-MOUSE-BUTTON
  464.  
  465.              Pressing and releasing the RIGHT mouse button is the same as
  466.              pressing the ESC key.
  467.  
  468.         ACTIVATING THE MENU SYSTEM
  469.  
  470.              To activate the normal menu system in SHEZ, move the mouse cursor
  471.              to the top line of the display and press and release the LEFT
  472.              mouse button.  The normal menu bar will appear after releasing
  473.              the button.  The mouse cursor may now be positioned over any of
  474.              the menu items, and pressing and releasing the LEFT mouse button
  475.              will cause the selectable menu box to appear.  When a drop down
  476.              menu box appears you may then position the mouse cursor on a menu
  477.              item.  Pressing and releasing the LEFT mouse button ONCE will
  478.              cause the menu item to be highlighted.  Pressing and releasing
  479.  
  480.  
  481.  
  482.                                    SHEZ USER MANUAL                  PAGE -10-
  483.  
  484.  
  485.              the LEFT mouse button on a HIGHLIGHTED item will cause the
  486.              indicated item to be executed.
  487.  
  488.         ZOOMING DIRECTORY WINDOW WITH MOUSE
  489.              The DOS directory window can be zoomed to full screen width and
  490.              unzoomed to normal mode.  The ZOOM/UNZOOM the window using the
  491.              mouse, position the mouse cursor to the [■] located at the bottom
  492.              left position of the windows and press and release the left mouse
  493.              button.
  494.  
  495.  
  496.                                    SHEZ USER MANUAL                  PAGE -11-
  497.  
  498.  
  499.         NAVIGATING A SCROLLABLE DIALOGUE BOX USING THE MOUSE
  500.  
  501.              When a scrollable dialogue box appears the mouse cursor can be
  502.              positioned on the scroll bars, or within the dialogue box to
  503.              perform the following actions:
  504.  
  505.              1)   Scroll the box up and down.
  506.              2)   Scroll the box right and left.
  507.              3)   Move the highlight bar to an item.
  508.              4)   Tag an individual item.
  509.  
  510.              The sample screen display below shows the areas of a scrollable
  511.              dialogue box where the LEFT mouse button performs an action.
  512.  
  513.  
  514.         ╒E══E:\APPS\TC\ZIP\$.$════════════════╕
  515.         │ <..>                                <----Scroll-UP
  516.         │ SHEZ     EXE 05/10/93 09:53   237264▒<-+
  517.         │ SHEZCFG  EXE 05/10/93 08:42    59230▒  |
  518.         │ SHEZ89D  ZIP 03/13/93 22:41    84419▒  |
  519.         │ SHEZ89S  ZIP 04/26/93 07:44   260032▒  +--Page-UP-area
  520.         │ SHEZ90S  ZIP 04/26/93 07:44   261740▒  |
  521.         │ SHEZ91S  ZIP 05/10/93 10:07   291251▒  |
  522.         │ SHEZCD2  ZIP 02/19/93 07:10   199738▒  |
  523.         │ V                                  V▒<-+
  524.         │ |                                  |█<----Position-indicator
  525.         │ |----------------------------------|▒<-+
  526.         │ +-------------------------+--------+▒  |
  527.         │                           |         ▒  +--Page-Down-area
  528.         │                           |         ▒  |
  529.         │                           |         ▒  |
  530.         │                           |         ▒  |
  531.         │                           |         ▒<-+
  532.         │                           |         <----Scroll-Down
  533.         ╘══════════════════════     | ════════╛
  534.         VV                          |
  535.         ||                          |
  536.         ++---Mouse-Tag-area         +Mouse-position-highlight-bar-area
  537.  
  538.  
  539.              To move the highlight bar to an item, position the mouse cursor
  540.              on the item and press and release the LEFT mouse button.
  541.              Pressing and releasing the LEFT mouse button on a currently
  542.              highlighted item performs the same action as pressing the ENTER
  543.              key.
  544.  
  545.              To TAG/UNTAG an item, position the mouse cursor to the LEFT of
  546.              the item and press and release the LEFT mouse button.
  547.  
  548.              To perform a PAGE-UP or PAGE-DOWN position the mouse cursor on
  549.              the scroll bar either above or below the position indicator and
  550.              press the LEFT mouse button.  To scroll the items up and down
  551.              position the mouse cursor on the Scroll-up or Scroll-down arrows
  552.              and press the LEFT mouse button.  Both paging and scrolling are
  553.              repeatable.  Holding the LEFT mouse button down will repeat the
  554.              action until the button is released.
  555.  
  556.         MOUSE SELECTABLE ITEMS IN A DIALOG BOX
  557.  
  558.  
  559.  
  560.                                    SHEZ USER MANUAL                  PAGE -12-
  561.  
  562.  
  563.              Some dialog boxes allow you to enter options via the mouse.  When
  564.              a dialog box has mouse selectable items they will appear on the
  565.              bottom line of the dialog box enclosed in braces.  To respond to
  566.              the dialog box place the mouse cursor on one of the items
  567.              enclosed in braces and press and release the left mouse button.
  568.  
  569.         ╒════════════[Sort by Name, Extension, Date, Size,orUnsort?]═════════╕
  570.         │Enter N,E,D,S,U or ESC to exit==>                                   │
  571.         ╘{UNEDS}═════════════════════════════════════════════════════════════╛
  572.             
  573.             │
  574.             └──This is the mouse selectable area.]
  575.  
  576.  
  577.                                    SHEZ USER MANUAL                  PAGE -13-
  578.  
  579.  
  580.                            ACTIVATING THE QUICK MOUSE MENU
  581.  
  582.         In addition to the normal menu system, SHEZ also contains a QUICK
  583.         MOUSE MENU SYSTEM.  This menu system contains a few frequently used
  584.         commands that can be accessed quickly.  There are three ways to
  585.         activate the QUICK MOUSE MENU:
  586.              1)   To display the MOUSE MENU, position the mouse cursor on the
  587.                   [MM] item on the mouse action bar at the bottom of the
  588.                   screen.  Press and release the left mouse button and the
  589.                   MOUSE MENU will appear.
  590.              2)   Press and hold the right mouse button, then press and hold
  591.                   the left mouse button, then release both bottons.
  592.              3)   If you have a three button mouse press and release the
  593.                   middle mouse button.
  594.  
  595.         One of two mouse menu's will appear depending upon where you are in
  596.         SHEZ.  If the DOS directory window in displayed the first menu will
  597.         appear,  if you are looking at the contents of a compressed file the
  598.         second menu will appear.
  599.  
  600.                          MENU WHEN DOS DIRECTORY IS DISPLAYED
  601.                                ╒═══════[CHOOSE]═══════╕
  602.                                │ View A File          │
  603.                                │ View  FILE_ID.DIZ    │
  604.                                │ QuickView A File     │
  605.                                │ External Viewer      │
  606.                                │ Convert File         │
  607.                                │ Convert to SFX       │
  608.                                │ Copy File            │
  609.                                │ Move File            │
  610.                                │ Rename File          │
  611.                                │ Delete File(s)       │
  612.                                │ Convert Tagged       │
  613.                                │ Make Tagged SFX      │
  614.                                │ Copy Tagged          │
  615.                                │ Move Tagged          │
  616.                                │ Rename Tagged        │
  617.                                │ Specify Extract Path │
  618.                                │ Create new           │
  619.                                │ Sort list            │
  620.                                │ Exit to Extract      │
  621.                                ╘══════════════════════╛
  622.  
  623.                 MENU WHEN LOOKING AT THE CONTENTS OF A COMPRESSED FILE
  624.                                ╒═══════[CHOOSE]═══════╕
  625.                                │ View File            │
  626.                                │ QuickView File       │
  627.                                │ Freshen Files        │
  628.                                │ External Viewer      │
  629.                                │ Extract File         │
  630.                                │ Delete File(s)       │
  631.                                │ Add File             │
  632.                                │ Edit File            │
  633.                                │ Execute File         │
  634.                                │ Convert From SFX     │
  635.                                │ Extract All          │
  636.                                │ Extract Tagged       │
  637.                                │ Specify Extract Path │
  638.                                │ Create New           │
  639.  
  640.  
  641.  
  642.                                    SHEZ USER MANUAL                  PAGE -14-
  643.  
  644.  
  645.                                │ Sort list            │
  646.                                │ Exit to Extract      │
  647.                                ╘══════════════════════╛
  648.  
  649.         When the mouse menu appears pressing and releasing the RIGHT button
  650.         will cancel the mouse menu.  To perform one of the item position the
  651.         mouse cursor on the item to be performed and press and release the
  652.         LEFT mouse button TWICE.
  653.  
  654.  
  655.                                    SHEZ USER MANUAL                  PAGE -15-
  656.  
  657.  
  658.                    USING THE MOUSE WITH VERN BUERG'S LIST PROGRAM.
  659.  
  660.         I have had numerous questions on how to allow the mouse to function
  661.         when viewing a file via Vern's list program.  In order to allow the
  662.         mouse to function within list you must "CLONE" the mouse option into
  663.         the list program.  You must be using LIST PLUS version 7.2 in order to
  664.         use the mouse.  To clone the mouse option change to the directory that
  665.         contains the LIST.COM program, then start the LIST program from the
  666.         DOS prompt and include the mouse command line option /M.  I.E. LIST
  667.         /M. When the first screen appears press ALT-C to modify LIST.COM to
  668.         always startup with the mouse option.  If you need further information
  669.         on cloning the list program please see the documentation included with
  670.         LIST.
  671.  
  672.  
  673.                                 INTERNAL QUICK-VIEWER
  674.  
  675.         Shez also contains it's own internal file browser called QUICKVIEW.
  676.         QUICKVIEW has full mouse support and will allow you to view any size
  677.         file using a minimum of memory.  While it is not substitute for a full
  678.         featured browsing program such as Vern Buerg's LIST program, it is
  679.         very fast and allows you to view any file in ASCII or HEX modes.  If
  680.         you don't have an external browsing program QUICKVIEW will allow you
  681.         to use SHEZ as it was intended.
  682.  
  683.  
  684.                                EDITING KEY DEFINITIONS
  685.  
  686.  
  687.         When you are prompted to enter information the following editing keys
  688.         can be used:
  689.  
  690.         Home:          Go to beginning of input line.
  691.         End:      Go to end of input line.
  692.         Backspace:     Go back one character and delete.
  693.         CTL-END:  Erase to end of line.
  694.         Cursor Right:  Move right one character.
  695.         Cursor Left:   Move left one character.
  696.         ESC:      Cancel input.
  697.  
  698.  
  699.  
  700.                                    SHEZ USER MANUAL                  PAGE -16-
  701.  
  702.  
  703.              FUNCTION SUPPORTED WHEN A DOS DIRECTORY WINDOW IS DISPLAYED
  704.  
  705.         DOS directory Speed Search
  706.              When the DOS directory window is displayed you may quickly
  707.              position the highlight bar to a directory or file by pressing a
  708.              single letter or number.  Pressing an UPPER CASE A-Z or 0-9 will
  709.              be position you to the first directory that begins with the
  710.              pressed letter or number.  Pressing the same letter or number
  711.              again will position the highlight bar to the next matching entry.
  712.              If no entry begins with the entered letter or number the
  713.              highlight bar will not be moved.
  714.  
  715.              Pressing an lower case a-z or 0-9 will be position you to the
  716.              FILES that begins with the pressed letter or number.
  717.  
  718.         Extract location - ALT-P
  719.              This option will prompt you to enter a drive and directory
  720.              of where to place files that you extract from the archive.
  721.              This location will remain in effect until you enter the
  722.              ALT-P command again and clear the drive and directory or you
  723.              change to another archive file. This command is used when
  724.              you want to place extracted files in a location other than
  725.              the current drive and directory.
  726.  
  727.              If you specify a directory that does not exist a
  728.              ERROR/INFORMATION window will appear indicating that the
  729.              directory does not exist.  You may press the F10 key to create
  730.              the directory.
  731.  
  732.              This command may be issued at any time.
  733.  
  734.              When the input window appears pressing the F9 key will open
  735.              another window which will display a scrollable list of
  736.              directories. To display a list of directories other than on the
  737.              current drive, enter the drive letter followed by a colon, then
  738.              press the F9 key.  Scroll the list using the up and down cursor
  739.              keys, and press the ENTER key to select the directory you wish to
  740.              extract files into.
  741.  
  742.         Create a new archive file - F7
  743.              This option allows you to create a new compressed file.  For
  744.              further information see the section titled, CREATING NEW
  745.              COMPRESSED FILES on page 44.
  746.  
  747.         Show help screen - F1
  748.              This will display a help screen showing all currently supported
  749.              commands.  Any command can be entered while the help screen is
  750.              displayed.
  751.  
  752.         Temporary exit to DOS - F10
  753.              This will temporarily clear the screen and exit to DOS. You can
  754.              then execute and command you want.  To return to SHEZ type in
  755.              EXIT at the DOS prompt and press return. (Not available when
  756.              running under DESQVIEW)
  757.  
  758.         Temporary exit to DOS into Extract Directory - ALT-F10
  759.              This will temporarily clear the screen and exit to DOS into the
  760.              currently defined extract directory. You can then execute and
  761.              command you want.  To return to SHEZ type in EXIT at the DOS
  762.  
  763.  
  764.  
  765.                                    SHEZ USER MANUAL                  PAGE -17-
  766.  
  767.  
  768.              prompt and press return. (Not available when running under
  769.              DESQVIEW)
  770.  
  771.         Select a new archive file - F2
  772.              This option will prompt you to enter a new disk, directory, and
  773.              filespec to find another archive file to work with.
  774.              If you enter a filespec of $.$ SHEZ will only list directory
  775.              entries and file that have extensions of .ARC, .ZIP, .LZH, PAK,
  776.              ARJ, ZOO, SQZ, and UC2.
  777.  
  778.              When the input window appears pressing the F9 key will open
  779.              another window which will display a scrollable list of
  780.              directories. To display a list of directories other than on the
  781.              current drive, enter the drive letter followed by a colon, then
  782.              press the F9 key.  Scroll the list using the up and down cursor
  783.              keys, and press the ENTER key to select the directory you wish to
  784.              change to.
  785.  
  786.         View a file - F3
  787.              This option will allow you to view any file that is listed in the
  788.              main file window.  Simply highlight the file you wish to view by
  789.              using the cursor keys then press the F3 key.  The list program
  790.              will be invoked allowing you to view the contents of the file.
  791.              (ALSO SEE CTL-ENTER FOR ALTERNATE FILE VIEWERS)
  792.  
  793.         Delete a DOS file or empty directory - F4
  794.              This option allows you to delete the file that is currently
  795.              highlighted in the file window.  Please note will be asked if you
  796.              want to delete the file. Respond Y if you wish to delete the
  797.              file, anything else will abort the delete. The deleted file name
  798.              will not be removed from the displayed list. Instead it will be
  799.              flagged with an # to the left of the filename and a 'd' to the
  800.              right.
  801.              If the highlighted entry is a directory, SHEZ will remove the
  802.              directory only if there are no files or sub-directories under
  803.              this directory.
  804.  
  805.         Sort the file list - F9
  806.              This option will sort the file list that appears on the left side
  807.              of the screen. You will be asked if you want the list sorted by
  808.              filename, file extension, file date,  file size, tagged status,
  809.              or unsorted. When sorting by filename any directory found will
  810.              also be sorted. When sorting by extension, date, or size the
  811.              directories will be sorted at the top of the list.  When sorting
  812.              by date the file time is also included in the sort.
  813.              A dialog box will also appear asking you if you wish to sort in
  814.              Ascending or Descending order.
  815.  
  816.  
  817.                                    SHEZ USER MANUAL                  PAGE -18-
  818.  
  819.  
  820.         Convert highlighted file - ALT-V
  821.              This option will convert the highlighted file to another archive
  822.              method.  A list will appear showing the available compression
  823.              alternatives that SHEZ has been configured for.  Using the mouse
  824.              or cursor keys highlight the compression method you wish to
  825.              convert to, then press the enter key. You may also press the ESC
  826.              key to cancel the conversion process.   The converted file will
  827.              be placed into the same directory as the original file, and the
  828.              original file will remain intact.  When a compressed file also
  829.              has directory information stored along with the filenames, and
  830.              the file is being converted to a compression method that supports
  831.              pathnames, SHEZ will retain the directory information.  In
  832.              addition, if the compressed files being converted has volume
  833.              label information stored, SHEZ will attempt to retain the volume
  834.              label information. (PLEASE NOTE: THE VOLUME LABEL PROCESSING WILL
  835.              ONLY WORK IF YOU ARE CONVERTING FROM A ZIP OR ARJ FILE FORMAT TO
  836.              A ZIP OR ARJ FILE FORMAT.  ALSO THE VOLUME LABEL PROCESSING WILL
  837.              NOT FUNCTION WHEN RUNNING SHEZ IN THE DOS BOX UNDER OS/2.)
  838.  
  839.         Convert all tagged files - CTL-V
  840.              This option will convert all tagged files to another archive
  841.              method. A list will appear showing the available compression
  842.              alternatives that SHEZ has been configured for.  Using the mouse
  843.              or cursor keys highlight the compression method you wish to
  844.              convert to, then press the enter key. You may also press the ESC
  845.              key to cancel the conversion process.   The converted file will
  846.              be placed into the same directory as the original file, and the
  847.              original file will remain intact.
  848.  
  849.         Convert highlighted file to a SFX file - F8
  850.              This option will convert the highlighted compressed file into a
  851.              Self extracting file.
  852.              (Currently only files in the ZIP,LZH, and PAK formats may be
  853.              converted)
  854.  
  855.              If you are converting a ZIP file that was created using version
  856.              1.1 of PKZIP, SHEZ will first attempt to create a MINI Self
  857.              extracting file. If that fails than a normal Self extracting file
  858.              will be created. See the PKZIP documentation for more on MINI
  859.              self extracting files.
  860.  
  861.                              NOTES ON CREATING SFX FILES
  862.  
  863.         To convert a ZIP file to self extracting file the program,
  864.         ZIP2EXE.EXE, must be in the current directory or in a directory that
  865.         is defined in your PATH.
  866.  
  867.         When a PAK file is converted the PAK file is replaced by the self
  868.         extracting file.  For example:  If tell SHEZ to convert a file named
  869.         TEST.PAK in the directory C:\TEST the TEST.PAK file will be deleted
  870.         from the C:\TEST directory and will be replaced by the file TEST.EXE.
  871.         This is not a function of SHEZ it is a function of the PAK compression
  872.         program.
  873.  
  874.         When an LZH file is converted to a self extracting file the LHARC
  875.         program will created either a .COM file or a .EXE file, depending on
  876.         the size of the LZH file.
  877.  
  878.  
  879.                                    SHEZ USER MANUAL                  PAGE -19-
  880.  
  881.  
  882.         Convert Tagged files to SFX files - SFT-F8
  883.              This option will convert all tagged compressed files into Self
  884.              extracting files.  See the F8 option above for additional
  885.              information on creating SFX files.
  886.         Write out configuration information - ALT-W
  887.              This option will write out a file named SHEZ.CFG. This file will
  888.              contain the current SHEZ configuration options.  This file can
  889.              then be used as your default configuration file.  This file
  890.              should be copied to a directory that is named in your path
  891.              statement.
  892.  
  893.         Copy highlighted file CTL-F2
  894.                  This option allows you to copy the highlighted file.  When
  895.         prompted for
  896.                  the location to copy to you may enter the target directory
  897.         name along
  898.                  with an optional filename and extension.  If the filename and
  899.         extension
  900.                  are not supplied SHEZ will use the original filename and
  901.         extension.
  902.                  You may also use the * wildcard character for either the
  903.         filename
  904.                  and/or the extension.  If you use the * character SHEZ will
  905.         use the
  906.                  original filename and/or extension when copying the file.
  907.                  I.E. From: = C:\UTILITY\ANY.ZIP
  908.                         To: = C:\WORK\NEW.*
  909.  
  910.                  This will create a file named NEW.ZIP in the \WORK directory.
  911.  
  912.                  The new file will have the original file's time and date
  913.         stamp.
  914.  
  915.         Move highlighted file CTL-F3
  916.              This option allows you to move the highlighted file.   When
  917.              prompted for the location to move to you may enter the target
  918.              directory name along with an optional filename and extension.  If
  919.              the filename and extension are not supplied SHEZ will use the
  920.              original filename and extension.
  921.              The moved file name will not be removed from the displayed list.
  922.              Instead it will be flagged with an # to the left of the filename
  923.              and a 'm' to the right.
  924.              If you move a file from one directory to another directory on the
  925.              same drive, SHEZ will simply modify the file pointers instead of
  926.              performing a copy and delete function.
  927.  
  928.         Rename highlighted file CTL-F6
  929.              This option allows you to rename the highlighted file.  You must
  930.              at least provide a filename and extension.
  931.  
  932.         Toggle the Tag status - SPACE
  933.              Pressing the space bar will toggle the tagged status of the
  934.              currently highlighted file. A check mark to the left of the
  935.              filename indicates that it is tagged.
  936.  
  937.              As files are tagged and untagged a count of the number of files
  938.              tagged along with the total size of all tagged files is updated
  939.              on the main screen.
  940.  
  941.  
  942.                                    SHEZ USER MANUAL                  PAGE -20-
  943.  
  944.  
  945.         Tag All Files - CTL-SPACE or CTL-T
  946.              This option will tag all files
  947.  
  948.         Untag all Files - CTL-U
  949.              This option will untag all tagged files.
  950.  
  951.         Add/Update compressed file comments - ALT-C
  952.              This option allows you to add/update the file comment records in
  953.              all tagged compressed files.  To use this option first create an
  954.              ASCII file that contains the file comments you wish to add to the
  955.              compressed files.  Then tag the files you wish to update, and
  956.              press the ALT-C keys.  You will be prompted for the ASCII file
  957.              that contains your comment record(s). SHEZ will then execute the
  958.              appropriate compressed file maintenance program to add/update the
  959.              file comments in each tagged compressed file.
  960.  
  961.         Immediate Exit ALT-Q
  962.              This option will immediately exit SHEZ.
  963.  
  964.         Test tagged compressed file(s) for viruses - ALT-Z
  965.              Using this option SHEZ interfaces with the virus scan program
  966.              (SCAN.EXE) that is produced by McAfee Associates.  You must have
  967.              version 39 or greater of this scan program in order for SHEZ to
  968.              use it correctly.
  969.  
  970.              First tag all the compressed files in the directory window that
  971.              you wish to test.  Then press the ALT-Z keys, or use the drop
  972.              down menus.  SHEZ will extract all .COM, .EXE, and .OV? files
  973.              into its working directory for each tagged compressed file, and
  974.              will execute the virus scan program to determine if any of the
  975.              program files have been infected. If an infected program is found
  976.              SHEZ will temporarily suspend its processing allowing you to see
  977.              which programs are infected.  You may then press any key to
  978.              continue scanning the rest of the tagged files.  (See the
  979.              configuration section of this manual for more information on
  980.              configuring SHEZ for this option).
  981.  
  982.              If there are any nested compressed files, SHEZ will also search
  983.              the nested compressed files for .COM, .EXE, and .OV? files for
  984.              viruses.  The nesting level search is limited only by the amount
  985.              of free disk space in the work drive assigned to SHEZ.
  986.  
  987.         Test for viruses and strip comments out of .ZIP files - CTL-Z
  988.              This option perform exactly the same function as the ALT-Z
  989.              command, with the added feature of stripping the master comment
  990.              record out of any .ZIP files that are scanned.
  991.  
  992.  
  993.                                    SHEZ USER MANUAL                  PAGE -21-
  994.  
  995.  
  996.         Copy all TAGGED DOS files   - SFT-F2
  997.         Move all TAGGED DOS files   - SFT-F3
  998.         Delete all TAGGED DOS files - SFT-F4
  999.         Rename all TAGGED DOS files - SFT-F6
  1000.              These options allow you to copy,move,delete, and rename the DOS
  1001.              files that are tagged in the file window.  Please note will be
  1002.              asked if you want to delete the files. Respond Y if you wish to
  1003.              delete the files, anything else will abort the delete.
  1004.              The deleted,moved and renamed files name will not be removed from
  1005.              the displayed list. Instead it will be flagged with an # to the
  1006.              left of the filename and a 'd', 'm', or 'r' to the right.
  1007.  
  1008.              When copying or moving files the new files will retain the
  1009.              original file's time and date stamp.
  1010.  
  1011.         Alternate file viewers - CTL-ENTER
  1012.              Pressing the CTL-ENTER command will allow you to view the
  1013.              currently highlighted file using a user specified alternate file
  1014.              viewer.
  1015.  
  1016.              (SEE THE SECTION "SETTING UP ALTERNATE FILE VIEWERS" ON PAGE 49
  1017.              FOR MORE INFO)
  1018.  
  1019.         Toggle authenticity mode in PKZIP - ALT-1
  1020.              Pressing the ALT-1 keys will toggle the authenticity mode when
  1021.              using PKZIP.  If the authenticity mode is active an ! will appear
  1022.              on the file list heading line to the right of [FILE LIST] box.
  1023.              When processing files in the authenticity mode SHEZ will instruct
  1024.              SHEZ to EXCLUDE a file named AVEXTRA.TXT.  This will allow you to
  1025.              add additional comments to a authenticated ZIP file without
  1026.              actually adding the file that contains the comments to the ZIP
  1027.              file.
  1028.  
  1029.         Edit highlighted file - ALT-E
  1030.              Pressing the ALT-E key tells SHEZ to invoke the user defined
  1031.              editor on the highlighted file.
  1032.  
  1033.         Tag highlighted file - (Plus key +)
  1034.              Pressing the + key will tag the highlighted file and move the
  1035.              highlight bar down one line.
  1036.  
  1037.         Untag highlighted file - (Minus key -)
  1038.              Pressing the - key will untag the highlighted file and move the
  1039.              highlight bar down one line.
  1040.  
  1041.         Tag highlighted file - ALT-+
  1042.              Pressing the + key will tag the highlighted file and move the
  1043.              highlight bar up one line.
  1044.  
  1045.         Untag highlighted file - ALT--
  1046.              Pressing the - key will untag the highlighted file and move the
  1047.              highlight bar up one line.
  1048.  
  1049.         Exit SHEZ goto EXTRACT dir - CTL-X
  1050.              Pressing the CTL-X key will immediately exit SHEZ and will place
  1051.              you into the EXTRACT disk and directory.
  1052.         Macro Pause - ALT-5
  1053.  
  1054.  
  1055.  
  1056.                                    SHEZ USER MANUAL                  PAGE -22-
  1057.  
  1058.  
  1059.         Start/Stop recording keystrokes - ALT-6
  1060.         Playback recorded keystrokes - ALT-7
  1061.         Cancel recording/playbak - CTL-Q
  1062.         Save recorded keystrokes - ALT-9
  1063.         Load and Execute keystroke file - ALT-8
  1064.              See the section entitled KEYSTROKE RECORDING/PLAYBACK FACILITY on
  1065.              page 41 for a full explanation of the keystroke record/playback
  1066.              facility.
  1067.  
  1068.         Activate volume label processing - ALT-4
  1069.              Pressing the ALT-4 key will activate the automatic volume label
  1070.              processing option in SHEZ.
  1071.              See section titled VOLUME LABEL SUPPORT on page 39 further
  1072.              information.
  1073.  
  1074.         Browse any file - ALT-B
  1075.              Pressing the ALT-B keys will allow you to view the contents of a
  1076.              user specified file.  A window will open asking you to enter the
  1077.              file specification of the file you wish to view.  Pressing the
  1078.              Enter key will invoke the file browsing program.  Pressing the
  1079.              ESC key will cancel the request.
  1080.  
  1081.         Wild card Toggle - F6
  1082.              Pressing the F6 key will toggle the wild card specification
  1083.              between *.* and $.$.  If SHEZ was started with a wild card
  1084.              specification other than *.* or $.$ this command has not effect.
  1085.  
  1086.         4DOS/NDOS file description display - ALT-D
  1087.              If you are running under 4DOS or NDOS and there is a DESCRIP.ION
  1088.              file in the directory you are looking at, pressing the ALT-D keys
  1089.              will display the 4DOS/NDOS description file contents to the right
  1090.              of the filenames, (First 23 characters only), and in a dialog box
  1091.              in the lower right corner of the screen. The dialog box will only
  1092.              appear when the DOS directory window is NOT zoomed full screen.
  1093.              Pressing the ALT-D again will display the file time, date, and
  1094.              size.
  1095.              (PLEASE NOTE: SHEZ CAN ONLY HANDLE DESCRIP.ION FILES THAT ARE
  1096.              30,000 BYES OR LESS)
  1097.  
  1098.         HOT DIRECTORY display - TAB KEY
  1099.              Pressing the TAB key will open a second DOS directory display
  1100.              window.  Before the window is opened SHEZ will prompt you for the
  1101.              DISK and Directory to display.  (Be sure to include the trailing
  1102.              backslash.  I.E. C:\MINE\)  If no file specification is included,
  1103.              a *.* file specification will be used.  When the directory window
  1104.              is open you may perform all supported file operations, such as
  1105.              copying, deleting, moving, single and/or groups of tagged files.
  1106.              You can close the directory window by pressing the TAB KEY again,
  1107.              or exit SHEZ by pressing the ALT-Q keys or the CTL-X keys.
  1108.  
  1109.         Delete highlighted / tagged file(s) - DEL KEY
  1110.              Pressing the delete key, will delete the highlighted file, if no
  1111.              files are currently tagged.  If there are files tagged then all
  1112.              tagged files will be deleted.
  1113.  
  1114.         Run PKZIPFIX against highlighted file - ALT-F
  1115.              Pressing the ALT-F key will run the PKZIPFIX program against the
  1116.              currently highlighted file.  It will create a PKFIXED.ZIP file in
  1117.              the same directory that the highlighted file exists in.
  1118.  
  1119.  
  1120.  
  1121.                                    SHEZ USER MANUAL                  PAGE -23-
  1122.  
  1123.  
  1124.         Format Floppy - ALT-O
  1125.              The ALT-O hot key sequence will allow you to format a floppy disk
  1126.              in the A: or B: drives.  See the section titled FORMATTING
  1127.              FLOPPIES later in this document.
  1128.  
  1129.         Update/Add 4DOS/NDOS file description - ALT-U
  1130.              If you are running under 4DOS or NDOS pressing the ALT-U key will
  1131.              allow you to Update and/or Add a file description line to the
  1132.              currently highlighted file.  If a DESCIPT.ION file does not exist
  1133.              one will be created, if it does exist it will be updated.
  1134.  
  1135.         Execute highlighted program - F5
  1136.              Pressing the F5 key, will execute the currently highlighted file
  1137.              if the file is a .EXE or .COM file.
  1138.  
  1139.         Modify file attributes - ALT-A
  1140.              Pressing the ALT-A keys will allow you to modify the highlighted
  1141.              file's attributes.  First an information box will appear showing
  1142.              you the files current attributes.  To modify the file's
  1143.              attributes press the ENTER key and a selection menu will appear.
  1144.              Using the space bar, tag the new attributes you wish to set
  1145.              and/or reset and press the ENTER key to perform the modification.
  1146.  
  1147.         Right and Left cursor keys
  1148.              The Right and Left cursor keys will now scroll the directory
  1149.              display windows RIGHT and LEFT allowing you to see the files
  1150.              attributes or the remainder of the 4DOS description text.
  1151.  
  1152.         QUICKVIEW a file - CTL-Q
  1153.              The CTL-Q command will activate SHEZ'S QUICKVIEW feature allowing
  1154.              you to view the currently selected file.
  1155.  
  1156.         Strip Comments from ZIP files - CTL-S
  1157.              The CTL-S command will remove the master comment records from ZIP
  1158.              comressed files.  This command will perform it's function on all
  1159.              tagged files, or only the currently hightlighted file if no files
  1160.              are tagged.
  1161.         Strip Comments from ZIP files - CTL-S
  1162.              The CTL-S command will remove the master comment records from ZIP
  1163.              comressed files.  This command will perform it's function on all
  1164.              tagged files, or only the currently hightlighted file if no files
  1165.              are tagged.
  1166.  
  1167.         Create Directory - CTL-F4
  1168.              Pressing the CTL-F4 keys will pop-up a dialog box allowing you to
  1169.              enter the name of the directory you wish to create.  This feature
  1170.              allows you to create an entire directory tree in one pass.  I.E.
  1171.              When the dialog box appears you can enter the following:
  1172.              D:\ONE\TWO\THREE\FOUR
  1173.              Of course you can still specify a single directory name  when the
  1174.              dialog box appears.
  1175.  
  1176.         Delete Directory Tree - CTL-F5
  1177.              USE THIS COMMAND WITH CAUTION!!!!!!!!!!!!!!!!!!!!!
  1178.              The CTL-F5 command will delete the hightlighted directory and ALL
  1179.              FILES AND DIRECTORIES UNDER IT. This is a fast way to remove a
  1180.              directory, but please use it with extreme caution.
  1181.  
  1182.         Print Functions - CTL-P
  1183.  
  1184.  
  1185.  
  1186.                                    SHEZ USER MANUAL                  PAGE -24-
  1187.  
  1188.  
  1189.              This command will bring up a print function menu.  When a printer
  1190.              is selected SHEZ will print all TAGGED files, or only the
  1191.              currently highlighted file if no files are tagged.  The following
  1192.              menu items will always appear:
  1193.  
  1194.              Change printer port
  1195.                   This option allows you to direct the print to an LPT port or
  1196.                   to a file.  To direct to an LPT port enter LPT1-9 when
  1197.                   prompted for location to print.
  1198.              DOS printer 80col
  1199.                   This will print the tagged or currently highlighted file in
  1200.                   a generic 80 column print mode.
  1201.              DOS printer 132col
  1202.                   This will print the tagged or currently highlighted file in
  1203.                   a generic 132 colume print mode.
  1204.              DOS printer HEX print
  1205.                   This will print the tagged or currently highlighted file in
  1206.                   hex mode.
  1207.              HPLASER II-IV 2up print
  1208.                   This will print the tagged or currently highlighted file in
  1209.                   landscape mode, two logical pages per physical page.  NOTE:
  1210.                   Thie print function will only operate on LASER printers that
  1211.                   support the HP LASER PCL 4 printer control codes.  IT WILL
  1212.                   NOT OPERATE CORRECTLY ON A HPLASER IIP.
  1213.              HPLASER II-IV land/bar
  1214.                   This will print the tagged or highlighted files in
  1215.                   compressed landscape mode shading every other line.  Up to
  1216.                   166 characters can appear on each print line.
  1217.  
  1218.              In addition to this menu items, if the user has defined
  1219.              additional printer in the SHEZ.INI file their names will appear
  1220.              after the HPLASER 2up print menu item.
  1221.  
  1222.         Virus scan directory - ALT-S
  1223.              This command will scan the currently highlighted directory for
  1224.              viruses using the user defined virus scanning software.
  1225.  
  1226.         Zoom / Unzoom window - ALT-M
  1227.              When the DOS directory window is displayed, pressing the ALT-M
  1228.              keys will ZOOM or UNZOOM the window to full screen width.  When
  1229.              operating under 4DOS, if the user has 4DOS description display
  1230.              enabled, the 4DOS file descriptions will appear in the ZOOMED
  1231.              window to the right of the filenames.
  1232.  
  1233.         View FILE_ID.DIZ - ALT-F1
  1234.              Pressing the CTRL-D keys will cause SHEZ to search the currently
  1235.              highlighted compressed file for either of two files, FILE_ID.DIZ
  1236.              and DESC.SDI.  If either of these two files are found SHEZ will
  1237.              display the contents of the found file in a pop-up window on the
  1238.              right side of the screen.  Press any key will remove the pop-up
  1239.              screen.
  1240.  
  1241.         Change sort order - ALT-F9
  1242.              Pressing the ALT-F9 allows you to change the sort order of the
  1243.              displayed file list.  You may change the sort order to Ascending
  1244.              or Descending by pressing the A or D key in the dialog box.
  1245.  
  1246.         Smart copy - ALT-F2
  1247.  
  1248.  
  1249.  
  1250.                                    SHEZ USER MANUAL                  PAGE -25-
  1251.  
  1252.  
  1253.              Pressing the ALT-F2 keys will activate the smart copy function.
  1254.              The smart copy function performs the same function as the COPY
  1255.              TAGGED function with the additional feature of optimially filling
  1256.              the target drive.  SHEZ will scan the tagged file list and will
  1257.              select combinations of files to maximally fill the target drive.
  1258.              If all files will not fit on the target drive, SHEZ will untag
  1259.              the files that it could copy leaving the files that could not be
  1260.              copied tagged.
  1261.  
  1262.  
  1263.                                    SHEZ USER MANUAL                  PAGE -26-
  1264.  
  1265.  
  1266.         UUENCODE - ALT-F8
  1267.              Pressing the ALT-F8 keys will UUENCODE the tagged or highlighted
  1268.              file(s).  If no files are tagged then only the highlighted file
  1269.              will be UUENCODED.  Before UUENCODING the file(s) a dialog box
  1270.              will appear prompting you for the disk and directory of where to
  1271.              place the UUENCODED files.  The ENCODED files will have the same
  1272.              filenames as the orginial file(s) with a file extension of .UUE.
  1273.  
  1274.         UUDECODE - CTL-F8
  1275.              Pressing the CTL-F8 keys will UUDECODE the tagged or highlighted
  1276.              file(s).  If no files are tagged then only the highlighted file
  1277.              will be DECODED.  Before DECODING takes place a dialog box will
  1278.              appear prompting you for the disk and directory of where to place
  1279.              the DECODED files.  The DECODED files that are created will have
  1280.              the same name as when they were orginially encoded.
  1281.  
  1282.  
  1283.  
  1284.                                    SHEZ USER MANUAL                  PAGE -27-
  1285.  
  1286.  
  1287.                    FUNCTIONS WHEN VIEWING CONTENTS OF ARCHIVE FILE:
  1288.  
  1289.         Viewing a file - V
  1290.              Simply press the return key or the V key. This will temporarily
  1291.              unpack the file and will invoke the LIST program allowing you to
  1292.              view the file on your screen.  The temporary copy of the
  1293.              extracted file will be placed in the current disk and directory
  1294.              unless you specified a work disk to be used by using the
  1295.              configuration program.
  1296.  
  1297.         SHEZ will allow you to operate on compressed files that are contained
  1298.         within compressed files.  I.E. A zip file that contains zip files.  To
  1299.         view the contents of the embedded compressed file simply move the
  1300.         highlight bar to the compressed file and press the ENTER key.  The
  1301.         embedded compress file contents will now be displayed on the screen.
  1302.         You may view any of the files and/or extract any of the files
  1303.         contained in the compressed file.  However you may not add, delete, or
  1304.         update the embedded compressed file.
  1305.  
  1306.         Extracting a single file - E.
  1307.              This will extract the file that is being pointed to.  The
  1308.              extracted file will be placed on the current disk in the current
  1309.              directory. You may optionally use the ALT-P command to direct the
  1310.              extracted files to a different disk and/or directory.
  1311.  
  1312.         Testing archive integrity - T
  1313.              This will test the integrity of the archive file and will report
  1314.              the results on the screen.
  1315.  
  1316.         Display Info about archive file - I
  1317.              This will display information about the archive file in a small
  1318.              pop-up window at the top of the screen.  The information will
  1319.              include the number of files in the archive, the date of the
  1320.              newest file in the archive,  the total size of all the files in
  1321.              the archive including the total expanded size and total
  1322.              compressed size. It will also display the current default
  1323.              compression factor.
  1324.  
  1325.         Delete a file from the archive - D
  1326.              This will delete the selected file from the archive file. Before
  1327.              the file is deleted a prompt will appear asking for verification
  1328.              of the delete. In addition any files that were previously tagged
  1329.              will have the tag cleared.
  1330.  
  1331.         Delete a tagged files from an archive - CTL-D
  1332.              This command will deleted all tagged files from the archive file.
  1333.              Before the files are deleted a prompt will appear asking for
  1334.              verification of the delete operation.
  1335.  
  1336.  
  1337.                                    SHEZ USER MANUAL                  PAGE -28-
  1338.  
  1339.  
  1340.         Add file(s) to archive     - A
  1341.         Update files(s) in archive - U
  1342.         Move files(s) to archive   - M
  1343.         Freshen file(s) in archive - F
  1344.              Each of these options will cause a small window to open at the
  1345.              bottom of the screen.  The window will prompt you to enter one or
  1346.              more file specifications. These filespecs can include drive,
  1347.              path, and a filespec with wild cards.  All files matching the
  1348.              indicated filespec will be added, updated, moved or freshened in
  1349.              the current archive file depending on which option you initially
  1350.              picked. Any files that were previously tagged will have the tag
  1351.              cleared.
  1352.  
  1353.              For example if you enter a U to update files in the archive and
  1354.              you enter c:\source\*.c  d:\batch\*.c when prompted to enter a
  1355.              filespec, than all files on the C drive in the source directory
  1356.              that have a file extension of C, and all files on the D drive in
  1357.              the batch directory that have an extension of bat, will be
  1358.              updated in the current archive file.
  1359.  
  1360.         List of files to add to archive     - ALT-A
  1361.         List of files to freshen in archive - ALT-F
  1362.         List of files to move to archive    - ALT-M
  1363.         List of files to update in archive  - ALT-U
  1364.              Again each of these options will cause a small window to open at
  1365.              the bottom of the screen.  The window will prompt you to enter a
  1366.              filespec.  This filespec can include drive, path, and a filespec
  1367.              with wild cards.  When you press the return key another window
  1368.              will pop-up on the left side of the screen showing you all the
  1369.              files that were found that matched the filespec you entered. You
  1370.              can then use the cursor keys to scroll the file list.  Pressing
  1371.              the space bar will toggle the tagged status of the current
  1372.              highlighted file. When you are done tagging file press the return
  1373.              key and all files that you tagged will be added, freshened,
  1374.              moved, or updated in the current archive file. END GROUP
  1375.  
  1376.         Specify where to put extracted files - ALT-P
  1377.              This options will prompt you to enter a drive and directory of
  1378.              where to place files that you extract from the archive.  This
  1379.              location will remain in effect until you enter the ALT-P command
  1380.              again and clear the drive and directory or you change to another
  1381.              archive file. This command is used when you want to place
  1382.              extracted files in a location other than the current drive and
  1383.              directory.
  1384.  
  1385.              If you specify a directory that does not exist a
  1386.              ERROR/INFORMATION window will appear indicating that the
  1387.              directory does not exist.  You may press the F10 key to create
  1388.              the directory.
  1389.  
  1390.              This command may be issued at any time.
  1391.  
  1392.              When the input window appears pressing the F9 key will open
  1393.              another window which will display a scrollable list of
  1394.              directories. To display a list of directories other than on the
  1395.              current drive, enter the drive letter followed by a colon, then
  1396.              press the F9 key.  Scroll the list using the up and down cursor
  1397.              keys, and press the ENTER key to select the directory you wish to
  1398.              extract files into.
  1399.  
  1400.  
  1401.  
  1402.                                    SHEZ USER MANUAL                  PAGE -29-
  1403.  
  1404.  
  1405.         Extract all files from archive - ALT-X
  1406.              This command will extract all files from the archive file and
  1407.              place them in the current disk:\directory unless you specified a
  1408.              different extract location by using the ALT-P command.
  1409.  
  1410.         Delete all extracted files - ALT-D
  1411.              This command will delete all files in the current
  1412.              disk:\directory, or the one specified by the ALT-P command, that
  1413.              are also contained in the archive file.  The files will only be
  1414.              deleted if the file time and date are equal to or less then the
  1415.              file time and date of the same file that is contained in the
  1416.              compressed file. NOTE: it does not delete anything from the
  1417.              archive file.  This is useful when you extract file from the
  1418.              archive file and then you want to quickly delete all the
  1419.              extracted files.
  1420.  
  1421.         Execute a file in an archive file - R
  1422.              This command will execute the EXE or COM file that is currently
  1423.              highlighted on the archive file list.  The EXE or COM file will
  1424.              be extracted from the archive file and will be placed on the
  1425.              current disk in the current directory. You will then be prompted
  1426.              to enter any optional command line parameters that the program is
  1427.              expecting. The selected program will then be executed.  After the
  1428.              program is run the extracted file will be deleted. NOTE: You can
  1429.              specify a different disk drive to place the extracted file on by
  1430.              using the SHEZFG program.  This is useful when working with
  1431.              archive files that are on floppy disks.  If you specify disk C as
  1432.              the work disk in the SHEZFG program the extracted file will be
  1433.              placed on the C drive, will be executed from the C drive, and
  1434.              then will be deleted from the C drive.
  1435.  
  1436.         Speed search - ALT-S
  1437.              This option will allow you to quickly find a file in an archive.
  1438.              A window will pop-up asking you to enter a match pattern.  This
  1439.              pattern follows the standard DOS wildcard specifications. The
  1440.              list of files on the screen will then be scrolled to the first
  1441.              file that matches the pattern.  Pressing ALT-S again and pressing
  1442.              the ENTER key will position the highlight bar to the next file
  1443.              that matches the pattern.
  1444.  
  1445.         Immediate Exit - ALT-Q
  1446.              This option will immediately exit SHEZ.
  1447.  
  1448.         Extract all tagged files - CTL-E
  1449.              This option will extract all files that you tagged in the archive
  1450.              file.  To tag a file simply press the space bar to toggle the
  1451.              tagged status.  When a file is tagged it will be highlighted on
  1452.              the screen.
  1453.  
  1454.         Toggle the Tag status - SPACE
  1455.              Pressing the space bar will toggle the tagged status of the
  1456.              currently highlighted file. A check mark to the left of the
  1457.              filename indicates that it is tagged.
  1458.  
  1459.         Untag all tagged files - CTL-U
  1460.              This option will untag all files that you previously tagged.
  1461.  
  1462.         Tag All Files - CTL-SPACE
  1463.              This option will tag all files
  1464.  
  1465.  
  1466.  
  1467.                                    SHEZ USER MANUAL                  PAGE -30-
  1468.  
  1469.  
  1470.         Update the archive files time and date - CTL-T
  1471.              This option will change the archive file's time and date to match
  1472.              the time and date of the newest file in the archive file.
  1473.  
  1474.         Create a new archive file - F7
  1475.              This option allows you to create a new compressed file.  For
  1476.              further information see the section titled, CREATING NEW
  1477.              COMPRESSED FILES on page 44.
  1478.  
  1479.         Show help screen - F1
  1480.              This will display a help screen showing all currently supported
  1481.              commands.  Any command can be entered while the help screen is
  1482.              displayed.
  1483.  
  1484.         Temporary exit to DOS - F10
  1485.              This will temporarily clear the screen and exit to DOS. You can
  1486.              then execute and command you want.  To return to SHEZ type in
  1487.              EXIT at the DOS prompt and press return. (Not available when
  1488.              running under DESQVIEW)
  1489.  
  1490.         Temporary exit to DOS into Extract Directory - ALT-F10
  1491.              This will temporarily clear the screen and exit to DOS into the
  1492.              currently defined extract directory. You can then execute and
  1493.              command you want.  To return to SHEZ type in EXIT at the DOS
  1494.              prompt and press return. (Not available when running under
  1495.              DESQVIEW)
  1496.  
  1497.         Select a new archive file - F2
  1498.              This option will prompt you to enter a new disk, directory, and
  1499.              filespec to find another archive file to work with.
  1500.              If you enter a filespec of $.$ SHEZ will only list directory
  1501.              entries and file that have extensions of .ARC, .ZIP, .LZH, .PAK,
  1502.              ARJ, ZOO, SQZ. and UC2.
  1503.  
  1504.         Sort the archive file list - F9
  1505.              This option will allow you to sort the archive file list by Name,
  1506.              Extension, Date, Size, or Path name.  A small window will open up
  1507.              asking you how you want the list sorted.  Enter a N, E, D, S, or
  1508.              P.  When sorting by Path name the files will be soted by name
  1509.              within pathname.  A dialog box will also appear asking if you
  1510.              want to sort in Ascending or Descending order.
  1511.  
  1512.         Edit the selected file - F8
  1513.              This option will extract the selected file onto either the
  1514.              default disk or the work disk specified via the configuration
  1515.              program.  It will then invoke the editor specified via the
  1516.              configuration program passing the selected filename.ext to the
  1517.              editor.  When you exit your editor SHEZ will then MOVE the
  1518.              extracted file back into the archive, if it has been modified,
  1519.              and delete the extracted copy. If an editor was not specified
  1520.              during the configuration process this command will not function.
  1521.              If the compressed file is a .ZIP file and authenticity mode in
  1522.              toggled on when the edited file is saved back into the compressed
  1523.              file the authenticity mode will be honored.  If the file being
  1524.              edited has directory information stored with the filename, SHEZ
  1525.              will retain the directory information even when saving the file
  1526.              back into the compressed file.
  1527.  
  1528.  
  1529.                                    SHEZ USER MANUAL                  PAGE -31-
  1530.  
  1531.  
  1532.         Specify an archive file mask - Z
  1533.              This option allows you to display only the files in the archive
  1534.              that match the file mask.  The file mask uses the same wild card
  1535.              conventions as DOS.
  1536.  
  1537.         Toggle overwrite mode - O
  1538.              This option toggle overwrite mode on and off.  When overwrite
  1539.              mode is in effect an 'O' will appear in the upper right hand
  1540.              corner of the screen.  When overwrite mode is in effect, and you
  1541.              extract a file from an archive, it will be extracted even if it
  1542.              already exists on the target disk:\path.
  1543.  
  1544.         Add Update File Comments - ALT-C
  1545.              This option allows you to add and/or update the compressed file
  1546.              comments.
  1547.  
  1548.         Supply Password for File - G
  1549.              This option allows you to supply a password when working with
  1550.              password encrypted files.  The password will be used when
  1551.              extracting, viewing, and modifying the currently selected
  1552.              compressed file. When a password has been supplied the compressed
  1553.              file display window will indicate that a password is in effect.
  1554.  
  1555.         Set Path/Directory option - P
  1556.              If a file has been saved into a compressed file with a directory
  1557.              name the name will appear on the right side of the compressed
  1558.              file list.
  1559.  
  1560.              Normally when you update or extract files from a compressed file
  1561.              the directory information is ignored.  Using the 'P' option you
  1562.              can tell SHEZ that you want to save and/or use the directory
  1563.              information.  When you press the 'P' key a list of three options
  1564.              will appear on the screen.  The first option "Do not use Dir
  1565.              info", tells SHEZ to ignore directory information.  The second
  1566.              option "Use Dir Info" tells SHEZ to save the directory
  1567.              information when updating a compressed file, or to use the
  1568.              directory information when extracting files.  The third option,
  1569.              "Use Dir Info and Recurse", tells SHEZ to save directory
  1570.              information when updating a compressed file and to recurse down
  1571.              the directory tree when looking for files. The third option also
  1572.              tells SHEZ to use the directory information when extracting
  1573.              files.
  1574.  
  1575.              The selected option will remain in effect until you specifically
  1576.              reset it using the P command again.
  1577.              The following options are passed to the compression programs when
  1578.              directory information is to be used:
  1579.  
  1580.              USE DIR INFO             USE DIR INFO AND RECURSE
  1581.              Pkzip -P            Pkzip -Pr
  1582.              Pkunzip -d               Pkunzip -d
  1583.              Lharc /x            Lharc /x /r
  1584.              Lharc /x (when extracting)    Lharc /x (when extracting)
  1585.  
  1586.              Please consult the compression program's documentation for
  1587.              further information on what these options do.
  1588.  
  1589.  
  1590.                                    SHEZ USER MANUAL                  PAGE -32-
  1591.  
  1592.  
  1593.         View file and archive comment records - ALT-V
  1594.              This option will display on the screen the contents of the
  1595.              archive file along with any comment records that have been placed
  1596.              into the archive file.
  1597.  
  1598.         Add/Update highlighted archive file comments - s
  1599.              This option will allow you to add and/or update comment records
  1600.              that are associated with the highlighted file in the archive.
  1601.  
  1602.         Add/Update all archive file comments - SHIFT-S
  1603.              This option will allow you to add and/or update comment records
  1604.              that are associated with the each file in the archive.
  1605.  
  1606.         Convert SFX file - CTL-V
  1607.              This option will convert a self extracting compressed file (.COM
  1608.              or .EXE) back to a normal compressed file.  The normal compressed
  1609.              file will be placed on the same disk and in the same directory
  1610.              when the self extracting is located.  The self extracting file
  1611.              will remain intact.  Please note that this option is only
  1612.              available when you are viewing the contents of a self extracting
  1613.              file. For a list of the self extracting file that can be read my
  1614.              SHEZ see the section titled SELF EXTRACTING FILE SUPPORT on page
  1615.              46.
  1616.  
  1617.         Test COM,EXE, and OVL files in a compressed file for viruses -ALT-Z
  1618.              Using this option SHEZ interfaces with the virus scan program
  1619.              (SCAN.EXE) that is produced by McAfee Associates.  You must have
  1620.              version 39 or greater of this scan program in order for SHEZ to
  1621.              use it.  When you press the ALT-Z key SHEZ will extract all .COM,
  1622.              .EXE, and .OV? files into its working directory and will execute
  1623.              the virus scan program to determine if any of the program files
  1624.              have been infected. (See the configuration section of this manual
  1625.              for more information on configuring SHEZ for this option).
  1626.              Beginning with release 6.5 of SHEZ you may now tag the files you
  1627.              wish to check for viruses before pressing the ALT-Z keys.  When
  1628.              files are tagged, only the tagged files will be checked.
  1629.  
  1630.         Extract only newer files - ALT-N
  1631.              The ALT-N command will only extract files contained in the
  1632.              compressed file that are newer than the files that are contained
  1633.              in the extract directory.
  1634.              If no files are TAGGED ALT-N will extract all newer files that
  1635.              are contained in the compressed file into the extract directory.
  1636.              If there are files tagged, only the newer tagged files will be
  1637.              extracted.
  1638.  
  1639.         Alternate file viewers - CTL-ENTER
  1640.              Pressing the CTL-ENTER command will allow you to view the
  1641.              currently highlighted file using a user specified alternate file
  1642.              viewer.
  1643.  
  1644.              (SEE THE SECTION "SETTING UP ALTERNATE FILE VIEWERS" on page 49
  1645.              FOR MORE INFO)
  1646.  
  1647.  
  1648.                                    SHEZ USER MANUAL                  PAGE -33-
  1649.  
  1650.  
  1651.         Show tagged file count - ALT-T
  1652.              Pressing the ALT-T keys will toggle the function key line to show
  1653.              you, the number of files tagged, total compressed file size, and
  1654.              total uncompressed file size.  If the compressed files you are
  1655.              working with is a ZIP file it will also show you the size of the
  1656.              ZIP file that will be created if you build a new ZIP files
  1657.              containing all of the tagged files.  Please note this is only an
  1658.              estimate and does not take into account file comment records and
  1659.              it assumes that the compression method will be the same as is
  1660.              currently used.
  1661.  
  1662.         Toggle authenticity mode in PKZIP - ALT-1
  1663.              Pressing the ALT-1 keys will toggle the authenticity mode when
  1664.              using PKZIP.  If the authenticity mode is active an ! will appear
  1665.              on the heading line to the right of the NAME heading field.
  1666.  
  1667.         Copy tagged members to another compressed file - CTL-Y
  1668.              The CTL-Y command allows you to copy selected members of a
  1669.              compressed file to another compressed file.  The target
  1670.              compressed file can be any currently supported compressed file
  1671.              format.  To perform the copy, first open up the compressed file
  1672.              you wish to copy FROM.  Then using the space bar tag the files
  1673.              you wish to copy.  Next press the CTL-Y keys.  A window will
  1674.              appear asking you to enter the FULL path of the compressed file
  1675.              to want to copy the selected members into.  You may enter only a
  1676.              DRIVE:\PATH\ (note ending backslash) and press the F9 key to
  1677.              obtain a listing of file in the entered directory, or you may
  1678.              enter the complete filespec of the target compressed file.  You
  1679.              may also press the F9 key as soon as the window appear to obtain
  1680.              a list of files in the current directory.  Pressing the enter
  1681.              will then perform the copy operation.  The files that were tagged
  1682.              will remain tagged after the copy operation has been performed
  1683.              allowing you to do a CTL-D (delete all tagged files) if desired.
  1684.              If the file you wish to copy to does not exist a window will
  1685.              appear asking if you want to create a new compressed file.  Press
  1686.              the F10 key to created a new file, Press any other key to re-
  1687.              enter the name of the compressed file to copy to.
  1688.  
  1689.         Tag highlighted file - (Plus key +)
  1690.              Pressing the + key will tag the highlighted file and move the
  1691.              highlight bar down one line.
  1692.  
  1693.         Untag highlighted file - (Minus key -)
  1694.              Pressing the - key will untag the highlighted file and move the
  1695.              highlight bar down one line.
  1696.  
  1697.         Exit SHEZ - ESC
  1698.  
  1699.         Exit SHEZ goto EXTRACT dir - CTL-X
  1700.              Pressing the CTL-X key will immediately exit SHEZ and will place
  1701.              you into the EXTRACT disk and directory.
  1702.  
  1703.         Right and Left cursor keys
  1704.              The RIGHT and LEFT cursor keys will scroll the compressed file
  1705.              view window RIGHT and LEFT allowing you to view long path names
  1706.              if they are stored in the compressed file.
  1707.  
  1708.  
  1709.                                    SHEZ USER MANUAL                  PAGE -34-
  1710.  
  1711.  
  1712.         Macro Pause - ALT-5
  1713.         Start/Stop recording keystrokes - ALT-6
  1714.         Playback recorded keystrokes - ALT-7
  1715.         Cancel recording/playbak - CTL-Q
  1716.         Save recorded keystrokes - ALT-9
  1717.         Load and Execute keystroke file - ALT-8
  1718.              See the section entitled KEYSTROKE RECORDING/PLAYBACK FACILITY on
  1719.              page 41 for a full explanation of the keystroke record/playback
  1720.              facility.
  1721.  
  1722.         Activate volume label processing - ALT-4
  1723.              Pressing the ALT-4 key will activate the automatic volume label
  1724.              processing option in SHEZ.
  1725.              See section titled VOLUME LABEL SUPPORT on page 39 for further
  1726.              information.
  1727.  
  1728.         Add volume label to existing compressed file - $
  1729.              Pressing the $ key will allow you to add volume label information
  1730.         to an existing ZIP or ARJ compressed file.
  1731.              See section titled VOLUME LABEL SUPPORT on page 39 for further
  1732.              information.
  1733.  
  1734.         Browse any file - ALT-B
  1735.              Pressing the ALT-B keys will allow you to view the contents of a
  1736.              user specified file.  A window will open asking you to enter the
  1737.              file specification of the file you wish to view.  Pressing the
  1738.              Enter key will invoke the file browsing program.  Pressing the
  1739.              ESC key will cancel the request.
  1740.  
  1741.         Scan file(s) for a string - ALT-G
  1742.              This command will allow you to search all, or only tagged files,
  1743.              for a specific string using the supplied SGREP program.  After
  1744.              the search is performed, the result of the search will be
  1745.              displayed on the screen.  When doing a search on numerous files
  1746.              or on a long file the search can be canceled by pressing the ESC
  1747.              key.
  1748.              For more information on the supplied SGREP program see the
  1749.              section titled, THE SGREP PROGRAM, later in this document.
  1750.  
  1751.         Run a program against all tagged files - ALT-Y
  1752.              This command will execute a user specified program against all
  1753.              tagged files.  The user will be prompted for the program to run,
  1754.              and the command line options to pass to the program.  The command
  1755.              line options MUST AT LEAST INCLUDE the special file name variable
  1756.              $F to tell SHEZ where to place the filename in the command line
  1757.              to pass to the specified program.  The user can also indicate if
  1758.              SHEZ should pause after each execution to allow the user view the
  1759.              output of the program.
  1760.  
  1761.         HOT DIRECTORY display - TAB KEY
  1762.              Pressing the TAB key will open a second DOS directory display
  1763.              window.  Before the window is opened SHEZ will prompt you for the
  1764.              DISK and Directory to display.  (Be sure to include the trailing
  1765.              backslash.  I.E. C:\MINE\)  If no file specification is included,
  1766.              a *.* file specification will be used.  When the directory window
  1767.              is open you may perform all supported file operations, such as
  1768.              copying, deleting, moving, single and/or groups of tagged files.
  1769.  
  1770.  
  1771.  
  1772.                                    SHEZ USER MANUAL                  PAGE -35-
  1773.  
  1774.  
  1775.              You can close the directory window by pressing the TAB KEY again,
  1776.              or exit SHEZ by pressing the ALT-Q keys or the CTL-X keys.
  1777.  
  1778.         Delete highlighted / tagged file(s) - DEL KEY
  1779.              Pressing the delete key, will delete the highlighted file, if no
  1780.              files are currently tagged.  If there are files tagged then all
  1781.              tagged files will be deleted.
  1782.  
  1783.         Format Floppy - ALT-O
  1784.              The ALT-O hot key sequence will allow you to format a floppy disk
  1785.              in the A: or B: drives.  See the section titled FORMATTING
  1786.              FLOPPIES later in this document.
  1787.  
  1788.         Rename highlighted file - ALT-R
  1789.              The ALT-R command will allow you to rename a file contained in a
  1790.              compressed file.  This is accomplished by 1) extracting the
  1791.              highlighted file, 2) renaming the extracted file, 3) adding the
  1792.              renamed file back into the compressed file, and 4) deleteing the
  1793.              orginial highlighted file from the compressed file.
  1794.  
  1795.         QUICKVIEW a file - CTL-Q
  1796.              The CTL-Q command will activate SHEZ'S QUICKVIEW feature allowing
  1797.              you to view the currently selected file.
  1798.  
  1799.         Strip Comments from ZIP files - CTL-S
  1800.              The CTL-S command will remove the master comment records from ZIP
  1801.              comressed files.
  1802.  
  1803.  
  1804.  
  1805.                                    SHEZ USER MANUAL                  PAGE -36-
  1806.  
  1807.  
  1808.         Print Functions - CTL-P
  1809.              This command will bring up a print function menu.  The following
  1810.              menu items will always appear:
  1811.  
  1812.              Change printer port
  1813.                   This option allows you to direct the print to an LPT port or
  1814.                   to a file.  To direct to an LPT port enter LPT1-9 when
  1815.                   prompted for location to print.
  1816.              DOS printer 80col
  1817.                   This will print the currently highlighted file in a generic
  1818.                   80 column print mode.
  1819.              DOS printer 132col
  1820.                   This will print the currently highlighted file in a generic
  1821.                   132 colume print mode.
  1822.              DOS printer HEX print
  1823.                   This will print the currently highlighted file in hex mode.
  1824.              HPLASER II-IV 2up print
  1825.                   This will print the currently highlighted file in landscape
  1826.                   mode, two logical pages per physical page.  NOTE: Thie print
  1827.                   function will only operate on LASER printers that support
  1828.                   the HP LASER PCL 4 printer control codes.  IT WILL NOT
  1829.                   OPERATE CORRECTLY ON A HPLASER IIP.
  1830.  
  1831.              In addition to this menu items, if the user has defined
  1832.              additional printer in the SHEZ.INI file their names will appear
  1833.              after the HPLASER 2up print menu item.
  1834.  
  1835.         Change sort order - ALT-F9
  1836.              Pressing the ALT-F9 allows you to change the sort order of the
  1837.              displayed file list.  You may change the sort order to Ascending
  1838.              or Descending by pressing the A or D key in the dialog box.
  1839.  
  1840.         UUENCODE - ALT-F8
  1841.              Pressing the ALT-F8 keys will UUENCODE the tagged or highlighted
  1842.              file(s).  If no files are tagged then only the highlighted file
  1843.              will be UUENCODED.  Before UUENCODING the file(s) a dialog box
  1844.              will appear prompting you for the disk and directory of where to
  1845.              place the UUENCODED files.  The ENCODED files will have the same
  1846.              filenames as the orginial file(s) with a file extension of .UUE.
  1847.  
  1848.         UUDECODE - CTL-F8
  1849.              Pressing the CTL-F8 keys will UUDECODE the tagged or highlighted
  1850.              file(s).  If no files are tagged then only the highlighted file
  1851.              will be DECODED.  Before DECODING takes place a dialog box will
  1852.              appear prompting you for the disk and directory of where to place
  1853.              the DECODED files.  The DECODED files that are created will have
  1854.              the same name as when they were orginially encoded.
  1855.  
  1856.  
  1857.  
  1858.                                    SHEZ USER MANUAL                  PAGE -37-
  1859.  
  1860.  
  1861.                       OPTIONS AVAILABLE ONLY VIA THE MENU SYSTEM
  1862.  
  1863.         There are a few options that are only available via the built-in menu
  1864.         system.  To activate the menu system press the forward slash key, /,
  1865.         and a menu bar will appear on the top line of the display.
  1866.  
  1867.         When the DOS directory screen is displayed, the following commands are
  1868.         only accessible via the menu system.  To access these commands press
  1869.         the / key, and move to the Opts menu item using the RIGHT CURSOR key,
  1870.         then press the ENTER key.  A list of selectable items will appear.
  1871.  
  1872.         Set ZIP Compression Method
  1873.              Selecting this option will cause a window to appear listing the
  1874.              available compression method options.  Using the UP/DOWN cursor
  1875.              keys highlight the compression method you wish to use, and press
  1876.              the space bar to select.  A check mark will appear to the left of
  1877.              the selected method.  This method will remain in effect until you
  1878.              change it again, or exit SHEZ.  After making your selection,
  1879.              press the ENTER key to activate your selection.
  1880.  
  1881.         Set ARJ Compression Method
  1882.              This option is the same as described above except it sets the
  1883.              compression method for ARJ type files.
  1884.  
  1885.         Set UC2 Compression Method
  1886.              This option is the same as described above except it sets the
  1887.              compression method for UC2 type files.
  1888.  
  1889.         Virus scan ALL files
  1890.              Selecting this option will instruct SHEZ to test all files
  1891.              contained in compressed files for Viruses.  This will remain in
  1892.              effect until you reset the option, or exit SHEZ.
  1893.  
  1894.         Virus scan ONLY EXECUTABLE files.
  1895.              Selecting this option will instruct SHEZ to test only executable
  1896.              files contained in compressed files for Viruses.
  1897.  
  1898.         Set Paging option for DOS and EDIT
  1899.              Selecting this option allows you to activate or de-activate the
  1900.              paging option when shelling to DOS, running an external program,
  1901.              or running an external Editor.
  1902.  
  1903.         Set Paging option for External Viewers
  1904.              Selecting this option allow you to activate or de-activate the
  1905.              paging option when running an external viewer program.
  1906.  
  1907.  
  1908.         When the compressed file contents screen is displayed, the same set of
  1909.         commands are only accessible via the menu system.  To access these
  1910.         commands press the / key, and move to the Other menu item using the
  1911.         RIGHT CURSOR key, then press the ENTER key.  A list of selectable
  1912.         items will appear, the items listed above will be included in this
  1913.         list.
  1914.  
  1915.         There is another set of option that is accessible only via the menu
  1916.         system when the compressed file contents screen is displayed.  This
  1917.         option all appear under the main PRINT menu option.
  1918.  
  1919.         PRINT DIRECTORY OF COMPRESSED FILES
  1920.  
  1921.  
  1922.  
  1923.                                    SHEZ USER MANUAL                  PAGE -38-
  1924.  
  1925.  
  1926.         Selecting the "Print directory of compressed file" allows you to print
  1927.         a formatted listing of the contents of the compressed file.  If this
  1928.         item is selected a drop down dialog box will appear allowing you to
  1929.         print to LPT1, LPT2, or LPT3.
  1930.  
  1931.         Also under the CONVERT menu option the following menu item will
  1932.         appear:
  1933.  
  1934.         CONVERT TO ANOTHER FORMAT
  1935.  
  1936.         This option allows you to convert the compressed file you are
  1937.         currently viewing to a different type of compressed file.
  1938.  
  1939.         Macro Help
  1940.              This selection instructs you to press the F1 key to obtain help
  1941.              on the macro recording/playback hot keys.
  1942.  
  1943.         Set macro playback speed
  1944.              Selecting this option will cause a selection box to appear
  1945.              allowing you to change the macro playback speed.  The available
  1946.              options are SLOW, MEDIUM, and FAST.  The default value is FAST.
  1947.  
  1948.  
  1949.                                    SHEZ USER MANUAL                  PAGE -39-
  1950.  
  1951.  
  1952.                                  VOLUME LABEL SUPPORT
  1953.  
  1954.  
  1955.         Shez now supports adding and extracting volume label information
  1956.         to/form compressed files.  Volume label processing is only supported
  1957.         for ZIP and ARJ type compressed files.
  1958.  
  1959.         ADDING VOLUME LABELS WHEN CREATING NEW COMPRESSED FILES:
  1960.  
  1961.         When creating a new ZIP or ARJ file via the F7 key, you will be asked
  1962.         if you wish to store volume label information.  If you respond Y, you
  1963.         will then be asked to enter the Drive Letter of the drive to obtain
  1964.         the volume label information from.  Enter the drive letter (A-Z).
  1965.         Please note: these prompts will only appear if you are creating a ZIP
  1966.         or ARJ compressed file.
  1967.  
  1968.         ADDING VOLUME LABELS TO AN EXISTING ZIP OR ARJ FILE:
  1969.  
  1970.         To add volume label information to a pre-existing ZIP or ARJ file,
  1971.         first open the compressed file by moving the highlight bar to the
  1972.         appropriate file.  Then press the enter key. This will open the
  1973.         compressed file. Then press the $ key (SHIFT 4).  You will be asked to
  1974.         enter the drive letter to obtain the volume label information from.
  1975.         Enter the drive letter (A-Z).  The volume label from the specified
  1976.         drive, if any exists, will be added to the compressed file.
  1977.  
  1978.         EXTRACTING VOLUME LABEL INFORMATION:
  1979.  
  1980.         To extract volume label information from an existing compressed file,
  1981.         press the ALT-4 key to turn on automatic volume label processing.
  1982.         When automatic volume label processing is active a $ will appear next
  1983.         to the NAME field heading in the compressed file listing, or will
  1984.         appear in the upper left corner of the DOS directory display window.
  1985.  
  1986.         After activating automatic label processing, open the appropriate
  1987.         compressed file as documented above.  Set the extract location using
  1988.         the ALT-P (extract path) command. Then extract any or all files from
  1989.         the compressed file.  During the extraction process the volume label
  1990.         contained in the compressed file will be used to update the volume
  1991.         label information on the extract drive.
  1992.  
  1993.         PLEASE NOTE: ONCE YOU TURN AUTOMATIC VOLUME LABEL PROCESSING ON, IT
  1994.         WILL REMAIN ON UNTIL YOU TURN IT OFF BY USING THE ALT-4 KEY AGAIN.
  1995.         PLEASE USE THIS OPTION WITH CARE.
  1996.  
  1997.                               FLOATING EXTRACT LOCATION
  1998.  
  1999.         SHEZ now supports a concept called the floating extract location.  The
  2000.         feature was added due to numerous user requests, and is an option
  2001.         feature which is activated via the SHEZCFG program.  Normally when
  2002.         SHEZ is executed SHEZ sets the file extract location to the current
  2003.         disk and directory.  When you change to a different disk and/or
  2004.         directory the extract location remains constant, pointing to the disk
  2005.         and directory where SHEZ was started from.  To change the extract
  2006.         location you needed to use the ALT-P command (change extract
  2007.         location).
  2008.  
  2009.         The floating extract location basically allows the extract location to
  2010.         float as you change to a new disk and/or directory.  The extract
  2011.  
  2012.  
  2013.  
  2014.                                    SHEZ USER MANUAL                  PAGE -40-
  2015.  
  2016.  
  2017.         location will float to what ever disk and directory you are currently
  2018.         looking at.  You can still dynamically specify an extract location by
  2019.         using the ALT-P command, but when the ALT-P command is issued the
  2020.         floating extract option will be de-activated from that point on.  You
  2021.         can reactivate the floating extract location logic by pressing the
  2022.         ALT-P keys and entering a single asterick at the prompt.
  2023.  
  2024.         To activate the floating extract location option, use the SHEZCFG
  2025.         program and choose the ADDITIONAL SETUP INFORMATION menu item.  When
  2026.         the SHEZCFG program prompt you for a default extract location, enter a
  2027.         single asterisk.  The single asterisk tells SHEZ to activate its
  2028.         floating extract logic.
  2029.  
  2030.                                  Ultravision Support
  2031.  
  2032.         SHEZ is Ultravision "aware".  SHEZ will operate in an Ultravision
  2033.         screen mode as long at the number of columns equals 80, and the number
  2034.         of rows are between 25-50. If SHEZ determines that Ultravision is
  2035.         installed, and it active in an non-supported screen mode, SHEZ will
  2036.         deactivate Ultravision, and then will set the screen mode to one of
  2037.         the supported modes.  When SHEZ is exited, it will re-activate
  2038.         Ultravision and put the screen mode back into the Ultravision mode is
  2039.         was in before SHEZ was started.
  2040.  
  2041.                                  FORMATTING FLOPPIES
  2042.  
  2043.         SHEZ has the ability to format a floppy disk in either the A: or B:
  2044.         drives.  The following disk capacities are supported:
  2045.         5 1/4 drives: 360KB and 1.2OK,  3 1/2 drives: 720KB and 1.44KB.
  2046.         To format a disk press the ALT-O keys and a dialogue box will appear.
  2047.         Enter the drive letter you wish to format, the capacity to format, and
  2048.         if you wish each track verified during the format process.  The verify
  2049.         process will increase the time it takes to format a disk.  If you are
  2050.         using high quality disks you can opt to not verify to speed up the
  2051.         format process.  After the disk is formatted you will have the option
  2052.         of adding a volume label to the disk.  If no volume label is wanted
  2053.         simply press the ENTER key without entering any information.
  2054.  
  2055.         If your PC is an "XT" class machine, the format dialog box will ask
  2056.         you the type of disk drive you are formatting in.  Enter the code that
  2057.         corresponds to the type of floppy drive you have installed.
  2058.  
  2059.         Formatting error codes can be found in the Apendix of this manual.
  2060.  
  2061.  
  2062.                                    SHEZ USER MANUAL                  PAGE -41-
  2063.  
  2064.  
  2065.                         KEYSTROKE RECORDING/PLAYBACK FACILITY
  2066.  
  2067.         Shez now has the built in ability to record, playback, load, and save
  2068.         key stokes.  All of the keystroke recording abilities must be
  2069.         activated from the keyboard. They can not be activated via the mouse
  2070.         or the pull-down menus.  A menu item for MACROS do appear on the menu
  2071.         bar, but it is only used to access the help panel for keystroke
  2072.         recording. If you are using a mouse the functions performed by the
  2073.         mouse WILL NOT BE RECORDED.  Only keystrokes entered directly from the
  2074.         keyboard will be recorded. During keystroke recording, the ALT-Q (QUIT
  2075.         SHEZ) key will be recorded, but will not be acted upon.  This will
  2076.         allow the user to record and save the ALT-Q key into the playback
  2077.         macro.
  2078.  
  2079.         The keyboard HOT-KEYS and there functions are explained below:
  2080.  
  2081.         ALT-5     Macro record/playback PAUSE
  2082.  
  2083.              The ALT-5 key is used to PAUSE the record/playback macro function
  2084.              to allow the user to respond to a dialogue box prompt.  When
  2085.              recording a macro and a dialogue box opens, press the ALT-5 key,
  2086.              then enter the response to the dialogue box.  The macro recording
  2087.              will resume as soon as the user presses the ESC, ENTER, or
  2088.              Function keys.
  2089.  
  2090.              When playing back a macro that has been recorded using the PAUSE
  2091.              feature, the macro will PAUSE at the same location where the ALT-
  2092.              5 key was originally pressed, allowing the user to enter data
  2093.              into a dialogue box prompt.
  2094.  
  2095.              For example: If you were recording a macro to search for a string
  2096.              of characters in a group of files and you wanted to input a
  2097.              different search string each time you executed the macro, you
  2098.              would:
  2099.  
  2100.              1)   Start the macro recording by pressing the ALT-6 key.
  2101.              2)   Open up the compressed file you wish to search.
  2102.              3)   Tag the files you what to scan through.
  2103.              4)   Press the ALT-G key to pop-up the search data entry box, as
  2104.                   shown below:
  2105.  
  2106.         +-------------------------[D:\TC\ZIP\SHEZ65S.ZIP]--------------+
  2107.         |NAME             SIZE     DATE  TIME   LENGTH  METHOD PATH    |
  2108.         |--------------------------------------------------------------|
  2109.         |DOSWDW   ASM     2875 01/25/90 11:26     7677  IMPLOD         |
  2110.         |MAKE286  BAT       80 06/25/91 14:25      100  SHRUNK         |
  2111.         |MAKEALL  BAT       80 10/03/91 10:25       89  SHRUNK         |
  2112.         |MA+----[ENTER STRING TO SEARCH FOR:(NO DOUBLE QUOTES CHARS AL+|
  2113.         |MA|==>                                                       ||
  2114.         |MA+-----------------[PRESS ENTER TO SAVE, ESC to cancel]-----+|
  2115.         |MAKESHEZ BAT       75 10/17/91 07:29       90  SHRUNK         |
  2116.         |MSHEZD   BAT       38 03/16/91 14:09       38  STORED         |
  2117.         |SHEZ     H       1466 11/22/91 07:39     4839  IMPLOD         |
  2118.         +=Add B=Brows F=Fresh U=Update M=Move E=Xlist X=Xall P=Xpath QS+
  2119.  
  2120.              5)   Press the ALT-5 key to PAUSE the macro facility.
  2121.              6)   Enter your search string and press the ENTER key.
  2122.  
  2123.  
  2124.  
  2125.                                    SHEZ USER MANUAL                  PAGE -42-
  2126.  
  2127.  
  2128.              7)   After the search is done press the ALT-6 key again to stop
  2129.                   macro recording.
  2130.              8)   Press the ALT-9 key to save your macro.
  2131.  
  2132.              Now when you playback the macro, when the search data entry box
  2133.              appears the macro will pause allowing you to alter the search
  2134.              string before processing the rest of the recorded macro.
  2135.  
  2136.              When the macro facility is in PAUSE mode, the ESC key, ENTER key,
  2137.              or any FUNCTION key will resume the execution of the macro.
  2138.  
  2139.         ALT-6     Start/Stop recording keystrokes.
  2140.  
  2141.              Pressing the ALT-6 keys will toggle the keyboard recording mode.
  2142.              When SHEZ is recording keystrokes the speaker will blip after
  2143.              every keystroke is pressed.  Pressing ALT-6 again will stop the
  2144.              keystrokes from being recorded. Up to 500 keystrokes may be
  2145.              recorded.
  2146.  
  2147.         ALT-7     Immediately play back the recorded keystrokes.
  2148.  
  2149.              Pressing the ALT-7 key will immediately playback your recorded
  2150.              keystrokes.
  2151.  
  2152.         CTL-Q     Cancel recording/playback and flush the keystroke record
  2153.                   buffer.
  2154.  
  2155.              Press the CTL-Q key either during a recording session, or during
  2156.              a playback, will cancel the record/playback, and will clear the
  2157.              keystroke buffer.
  2158.  
  2159.         ALT-9     Save recorded keystrokes.
  2160.  
  2161.              Pressing the ALT-9 key will pop-up a window allowing the user to
  2162.              save the recorded keystrokes into a file for use at a later time.
  2163.              You must stop recording by pressing the ALT-6 key before doing a
  2164.              save.  This key will also reset the record/playback function and
  2165.              clear the keystroke buffer.
  2166.  
  2167.         ALT-8     Load and Execute a saved keystroke file.
  2168.  
  2169.              Pressing the ALT-8 key will pop-up a window allowing the user to
  2170.              enter the name of a previously saved keystroke file.  After the
  2171.              file is loaded it will immediately be run.
  2172.  
  2173.         SHEZ will also allow the user to load and execute a save keystroke
  2174.         file at startup time.  The command line parameter /play={filespec}
  2175.         tells SHEZ to load the indicated filespec and playback the recorded
  2176.         keystrokes.
  2177.         PLEASE NOTE: SHEZ DOES NOT VERIFY THAT THE CONTENTS OF THIS FILE ARE
  2178.         ACTUALLY RECORDED KEYSTROKES. SO BE CAREFUL WHEN SPECIFYING THE
  2179.         FILESPEC!!
  2180.  
  2181.         Examples:
  2182.              SHEZ D:\DOWN\*.ZIP /PLAY=D:\AUTOSHEZ.MAC
  2183.  
  2184.         Start SHEZ and display all the .ZIP files in the D:\DOWN directory,
  2185.         and load and execute the recorded keystrokes contained in the
  2186.         D:\AUTOSHEZ.MAC file.
  2187.  
  2188.  
  2189.  
  2190.                                    SHEZ USER MANUAL                  PAGE -43-
  2191.  
  2192.  
  2193.              SHEZ D:\SOURCE\CODE.ZIP /PLAY=D:\REFRESH.MAC
  2194.  
  2195.         Start SHEZ and open the CODE.ZIP file contained in the D:\SOURCE
  2196.         directory, and load and execute the recorded keystrokes contained in
  2197.         the D:\REFRESH.MAC file.
  2198.  
  2199.         The playback speed may also be sent to SLOW, MEDIUM, or FAST by using
  2200.         the mAcro drop down menu item and selecting the playback speed
  2201.         selection.  The playback speed default is set to FAST.
  2202.  
  2203.  
  2204.  
  2205.                                    SHEZ USER MANUAL                  PAGE -44-
  2206.  
  2207.  
  2208.                             CREATING NEW COMPRESSED FILES
  2209.  
  2210.         SHEZ allows you to create new compressed files either from the
  2211.         directory display window, using the F7 key, or from the compressed
  2212.         file display window using the "C" command.
  2213.  
  2214.         A window will appear asking you to enter the drive, directory, of
  2215.         where to place the new file.  You may press the F9 key to view the
  2216.         directory structure in a tree format.  After selecting the location of
  2217.         the new file another aditios will appear asking you to specify the
  2218.         name of the compressed file to be created.  YOU MUST ENTER A FILE
  2219.         EXTENSION OF .ZIP,.ARC,.LZH,.ZOO,ARJ,SQZ,.PAK, or UC2 SO SHEZ KNOWS
  2220.         WHAT TYPE OF COMPRESSED FILE TO CREATE!!!!! Then you will asked if you
  2221.         want to add or move files into the new archive file.  You will also be
  2222.         asked to enter an optional password.  (If you enter a password all
  2223.         files added or moved to the archive file will be encrypted using the
  2224.         password. Do not forget the password you can not extract files from
  2225.         the file without the password and there is no way to determine the
  2226.         password if you forget it.)  Please note the password prompt will only
  2227.         appear if the compression program used to create the new file support
  2228.         encryption.
  2229.  
  2230.         A window will then be opened that will ask you to enter the filespecs
  2231.         of the files you wish to add or move into the new archive file. This
  2232.         filespec can include a disk, directory, and file specifications with
  2233.         wild cards.
  2234.  
  2235.         A third window will be opened allowing you to specify processing
  2236.         options.  The first option "Do you want to Tag files or Process as is"
  2237.         allows you to tell SHEZ that you want to Tag files for processing
  2238.         using the filespecs entered in the second window, or to simply pass
  2239.         the entered filespecs to the compression program exactly as entered.
  2240.         The second option "Do you want to save directory information" allows
  2241.         you to tell SHEZ that you want directory information saved in the
  2242.         compressed file.  The third option "Do you want to recurse
  2243.         directories"  will tell the compression program to add/move all files
  2244.         in the directory you specified plus all directories that exist beneath
  2245.         it.  A forth option will appear, "Store volume label into Compressed
  2246.         file? (Y or N)->".  This option will allow you to optionally store
  2247.         volume label information into the compressed file.  The default is not
  2248.         to store label information.  Respond Y if you wish to store the volume
  2249.         label information.  If you respond Y a fifth option will appear,
  2250.         "Enter drive letter of Volume label to Save".  When this prompt
  2251.         appears enter the letter of the drive you wish to obtain the volume
  2252.         label information from.
  2253.  
  2254.         If you are creating an ARJ file, you will also be asked if you wish to
  2255.         activate the multi-volume option of ARJ.  This option allows you to
  2256.         create a compressed file that will span multiple floppy disks.  Thus
  2257.         you can create a "backup" compressed file of an entire hard drive, or
  2258.         very large directory.
  2259.  
  2260.         If you indicated that you wanted to Tag files for processing a window
  2261.         will pop-up on the left side of the screen showing all files that
  2262.         matched the filespec you entered.  Tag the files you wish to add or
  2263.         move to the new compressed file by pressing the space bar.  When you
  2264.         are done tagging file press the return key and all tagged files will
  2265.         be added or moved into the new archive file.
  2266.  
  2267.  
  2268.                                    SHEZ USER MANUAL                  PAGE -45-
  2269.  
  2270.  
  2271.         Please note that some of these options may not appear when you create
  2272.         a compressed file.  If the compression program you are using does not
  2273.         support saving directory information the directory information prompts
  2274.         will not appear.
  2275.  
  2276.  
  2277.                                    CONVERTING FILES
  2278.  
  2279.         Shez has the ability to convert one, or a group of tagged files, from
  2280.         one format to another.  First you must get the file or files you want
  2281.         to convert to appear in the filelist window on the left side of the
  2282.         screen.  The easiest way to do this is to start up SHEZ and specify on
  2283.         the command line either *.*, *.ZIP, or *.ARC.  Then using the cursor
  2284.         keys highlight the file you want to convert and then press the ALT-V
  2285.         key to convert the file. You will then be asked, via a menu, what
  2286.         archive format you want to convert to.  Position the highlight bar to
  2287.         the type of compressed file you wish to convert to and press the enter
  2288.         key.  You will also be asked if you want to delete the original file
  2289.         after the conversion has been successfully completed.  Respond Y or N.
  2290.         The new file will be placed on the same disk and directory that the
  2291.         original file was on.
  2292.  
  2293.         During the conversion process, SHEZ will convert any nested compressed
  2294.         files that is can identify.  NOTE: nested compressed files that have
  2295.         been stored with path names will not be converted.  Self extracting
  2296.         compressed files also will not be converted.  SHEZ can only process
  2297.         compressed nested files that are one level deep.  Any nested
  2298.         compressed files that are nested more than one level deep will remain
  2299.         un-touched.
  2300.  
  2301.         To convert numerous files start up SHEZ as above and use the cursor
  2302.         keys to highlight the files you want to convert, then press the space
  2303.         bar to TAG these files.  After all files have been tagged press CTL-V
  2304.         to convert all TAGGED files.
  2305.  
  2306.         SHEZ will allow you to easily convert your old ZIP files into the new
  2307.         ZIP imploded format.  Simply tag the ZIP files you want to convert and
  2308.         specify that you want to convert them to ZIP files.  You will be asked
  2309.         if you want to delete the old compressed files after the conversion
  2310.         process.  SHEZ is smart enough not to delete the old compressed file
  2311.         if the have the same file extension as the new files.  I.E. when you
  2312.         convert a ZIP file to a ZIP file to take advantage of the new
  2313.         compression format SHEZ will not delete the converted ZIP files even
  2314.         if you told it to delete the old compressed files after converting
  2315.         them.
  2316.  
  2317.         After SHEZ converts a compressed file it will test the converted file
  2318.         for correctness.  If the converted file fails this test the converted
  2319.         file will be deleted and the orginial compressed file will remain
  2320.         intact.
  2321.  
  2322.  
  2323.         SHEZ will also allow you to convert old LZH files to the new LHA 2.05
  2324.         format using the same method of converting a file to itself.
  2325.  
  2326.  
  2327.  
  2328.                                    SHEZ USER MANUAL                  PAGE -46-
  2329.  
  2330.  
  2331.                           SUPPORT FOR SELF EXTRACTING FILES
  2332.  
  2333.         SHEZ also lets you view the contents of self extracting files.  Files
  2334.         that have been created by the following compression programs are
  2335.         supported:
  2336.  
  2337.         PKARC, PKPAK, PKZIP version .92 thru 2.04, LHARC version 1.12 thru
  2338.         2.05, PAK version 1.6 thru 2.01, ARC5 and ARC6, ARJ version 2.10, LHA
  2339.         2.12, SQZ 1.082 1.083.
  2340.  
  2341.         When you display the contents of a self extracting file SHEZ will
  2342.         attempt to identify which compression program was used to generate the
  2343.         self extracting file.  SHEZ will place the name of the compression
  2344.         program it has identified as the creator, on the heading line right
  2345.         next to the column titled NAME.
  2346.  
  2347.         In addition to viewing the contents of a self extracting file you may
  2348.         also extract individual files using SHEZ"s extract command.  You may
  2349.         also convert the self extracting file back to a normal compressed file
  2350.         using the CTL-V command, or using the pull down menus.
  2351.  
  2352.         You can not alter the contents of a self extracting file. I.E. add,
  2353.         update, freshen, move, etc.  The exception to this are self extracting
  2354.         files built by PKZIP.  These files you can treat like normal
  2355.         compressed files.  You can add, update, move, delete, freshen, etc.
  2356.  
  2357.  
  2358.  
  2359.                                    SHEZ USER MANUAL                  PAGE -47-
  2360.  
  2361.  
  2362.                                 ENVIRONMENT VARIABLES
  2363.  
  2364.         SHEZ will recognize the following environment variables if they are
  2365.         set:
  2366.  
  2367.         BIOS      This will force SHEZ to use BIOS for writing to the screen.
  2368.  
  2369.         MONO      This will force SHEZ to run in monochrome mode.
  2370.  
  2371.         SHEZEX         You can set this variable to the disk and path where
  2372.                        you want SHEZ to write extracted file to. You can reset
  2373.                        this default at any time by using the ALT-P command.
  2374.  
  2375.         SHEZWORK  This variable may be used to specify a working directory for
  2376.                   SHEZ to use instead of SHEZ building one of its own.  This
  2377.                   directory must be for the exclusive of SHEZ, and must exist
  2378.                   prior to invoking SHEZ.  WHEN SHEZ TERMINATES ALL FILES IN
  2379.                   THE DIRECTORY WILL BE DELETED, INCLUDING HIDDEN AND SYSTEM
  2380.                   FILES, BUT THE DIRECTORY WILL NOT BE DELETED.  This option
  2381.                   was added to allow more flexibility when running SHEZ on a
  2382.                   LAN based system.
  2383.  
  2384.         SHEZCMT   This variable may be set to specify a default comment file
  2385.                   when adding/updating compressed file comment records to a
  2386.                   group of tagged files.
  2387.  
  2388.         SHEZCFG   This variable points to your SHEZ.CFG file.  It is used to
  2389.                   carry forward, the SHEZ configuration options.
  2390.  
  2391.         SHEZLOG   This variable defines the LOG file that SHEZ will write to
  2392.                   when performing a virus check on tagged files from the DOS
  2393.                   directory window.  If the file does not exist it will be
  2394.                   created.  If the fill already exists new information will be
  2395.                   appended to the existing file.
  2396.  
  2397.         SHEZXMS   This variable de-activates SHEZ"s use of XMS memory.  It
  2398.                   will over-ride the EMS/XMS usage parameters that were set
  2399.                   via the SHEZCFG program.  Set this variable to any value to
  2400.                   de-active XMS memory usage.
  2401.                   Example: SHEZXMS=N  Don"t use XMS memory.
  2402.  
  2403.         SHEZEMS   This variable de-activates SHEZ"s use of EMS memory.  It
  2404.                   will over-ride the EMS/XMS usage parameters that were set
  2405.                   via the SHEZCFG program.  Set this variable to any value to
  2406.                   de-active EMS memory usage.
  2407.                   Example: SHEZEMS=N  Don"t use EMS memory.
  2408.  
  2409.         SHEZUSE   Using this variable you can over-ride the EMS/XMS memory
  2410.                   usage configuration that was setup via the SHEZCFG program.
  2411.                   Set this variable to the type of memory you wish SHEZ to
  2412.                   use.  I.E. E for EMS memory, and/or X for XMS memory.
  2413.  
  2414.                   Examples:
  2415.  
  2416.                   SHEZUSE=EX     Try EMS first then XMS
  2417.                   SHEZUSE=XE     Try XMS first then EMS
  2418.                   SHEZUSE=E Only try EMS memory
  2419.                   SHEZUSE=X Only try XMS memroy
  2420.                   SHEZUSE=NN     Don"t use XMS or EMS memory.
  2421.  
  2422.  
  2423.  
  2424.                                    SHEZ USER MANUAL                  PAGE -48-
  2425.  
  2426.  
  2427.         Examples:
  2428.         SET BIOS=Y
  2429.         SET MONO=Y
  2430.         SET SHEZEX=D:\WORK
  2431.         SET SHEZWORK=C:\SHEZXX\
  2432.         SET SHEZCMT=C:\COMMENT.DAT
  2433.         SET SHEZCFG=C:\DATA\SHEZ.CFG
  2434.         SET SHEZLOG=C:\LOG\SHEZ.LOG
  2435.  
  2436.         (This tells SHEZ to write extracted files onto the D disk in the \work
  2437.         directory.  You can change this at any time after executing SHEZ by
  2438.         using the ALT-P command.)
  2439.  
  2440.         The environment variables BIOS and MONO will override the BIOS and
  2441.         MONO parameters that were entered via the configuration program.
  2442.  
  2443.  
  2444.                                    SHEZ USER MANUAL                  PAGE -49-
  2445.  
  2446.  
  2447.                             SETTING ALTERNATE FILE VIEWERS
  2448.  
  2449.         Shez has the capability to activate user specified alternate file
  2450.         viewers when the CTL-ENTER key is pressed.  The alternate file viewers
  2451.         are specified
  2452.         in an external file named SHEZ.INI.  This file is a plain ASCII text
  2453.         file that indicates to SHEZ what program should be run as the
  2454.         alternate viewer, based on the highlighted file"s extension, when a
  2455.         user pressing the CNTL-ENTER key.
  2456.  
  2457.         The external file, SHEZ.INI, MUST be located in the current directory,
  2458.         or in a directory that is specified in your path statement.
  2459.  
  2460.         SEE APPENDIX 2 FOR A FULL DESCRIPTION OF THE ENTRIES ALLOWABLE IN THE
  2461.         SHEZ.INI FILE.
  2462.  
  2463.                              SETTING USER DEFINED PRINTER
  2464.  
  2465.         The SHEZ.INI file also allows you to define up to three user defined
  2466.         printers.  Included with each printer definition is it"s name as it
  2467.         will appear on the menu, a required setup string, an optional endup
  2468.         string, the number of character per line to print, and the number of
  2469.         lines per page to print.  The format of the required entries in the
  2470.         SHEZ.INI file is shown in APPENDIX 2.
  2471.  
  2472.                          SETTING UP USED DEFINED MENU ENTRIES
  2473.  
  2474.         The SHEZ.INI file also allows user defined menu items to be defined.
  2475.         Up to twenty user defined programs and/or batch files can be specified
  2476.         and they will appear on the uSer menu option when selected.  See
  2477.         APPENDIX 2 for the format of the entries required in the SHEZ.INI
  2478.         file.
  2479.  
  2480.         Any number of specific file viewers may be specified.  When CTL-ENTER
  2481.         is pressed, SHEZ first looks to see of a specific alternate file
  2482.         viewer has been defined for viewing files with a file extension the
  2483.         same of the highlighted file.  If one was defined it is activated and
  2484.         used.  If a specific viewer has not been defined SHEZ then determines
  2485.         if a "generic" alternate file viewer has been defined. If it has SHEZ
  2486.         uses the "generic" viewer.  If no alternate viewer has been defined
  2487.         SHEZ than defaults to using the normal viewer as defined when the
  2488.         SHEZCFG program was used to configure SHEZ.
  2489.  
  2490.         PLEASE NOTE: WHEN SHEZ ACTIVATES ANY ALTERNATE FILE VIEWER IT ALWAYS
  2491.         USES ITS PAGING LOGIC TO SWAP MOST OF ITS CODE OUT OF MEMORY TO GIVE
  2492.         MORE ROOM TO THE ALTERNATE FILE VIEWER.  THIS IS NOT A CONFIGURABLE
  2493.         OPTION SO BE FOREWARNED!!!!!!!!!!!!
  2494.  
  2495.  
  2496.                                PERFORMING A VIRUS SCAN
  2497.  
  2498.         SHEZ can scan for viruses in files that are contained in compressed
  2499.         files. It can also scan for viruses in files that are contained in
  2500.         embedded compressed files.  SHEZ can check an unlimited number of
  2501.         embedded compressed files, only limited by the amount of available
  2502.         disk space assigned to the SHEZ work disk.  When performing a virus
  2503.         scan SHEZ will also check for self extracting compressed files and
  2504.         will also check any files contained with the SFX files.
  2505.  
  2506.  
  2507.  
  2508.                                    SHEZ USER MANUAL                  PAGE -50-
  2509.  
  2510.  
  2511.         The first step performed during a virus check is to test the integrity
  2512.         of the compressed file.  If the integrity of the compressed file is
  2513.         compromised, all other action on the compressed file will be bypassed,
  2514.         and an error message will be issued.
  2515.  
  2516.         There are two way to perform a virus scan.  One is activated from the
  2517.         DOS directory window, and the other is invoked after opening up a
  2518.         compressed file.
  2519.  
  2520.         To perform a virus scan from the DOS directory window, tag the files
  2521.         you wish to check for viruses then press the ALT-Z or CTL-Z keys.
  2522.         This will initiate the scanning process on all tagged files.
  2523.  
  2524.         When virus checking files from the main DOS directory window, SHEZ
  2525.         will create a virus check log file if the environment variable SHEZLOG
  2526.         is defined.  For more information on this variable set the section
  2527.         entitled ENVIRONMENT VARIABLE on page 47.  The log file will be
  2528.         created if is does not exists, or will be appended to if it already
  2529.         exists.  The file will contain a listing of all the compressed files
  2530.         that are being checked, plus a list of all files within the compressed
  2531.         files that will be checked.  If a self extracting file is encountered,
  2532.         the log file will post an entry to the log file identifying the SFX
  2533.         file, and what type SFX it is.  Each time the log file is opened a
  2534.         time and date stamp line will be written into the file before any
  2535.         scanning occurs.  The log file is NOT updated when doing a virus scan
  2536.         from within an opened compressed file, it is only updated/created when
  2537.         doing a scan from the DOS directory window.
  2538.  
  2539.         BBS SYSOP NOTE:
  2540.              When performing a bulk virus scan on a group of tagged files SHEZ
  2541.              operates differently depending on in the SHEZLOG feature is
  2542.              active.  If the SHEZLOG feature is NOT active, any errors
  2543.              encountered will cause an error message box to appear on the
  2544.              screen, and all activity will stop until a key is pressed.  If
  2545.              the SHEZLOG feature is active, all error messages will be posted
  2546.              to the file pointed to by the SHEZLOG environment variable.  No
  2547.              error messages will appear on the screen.  Also when operating in
  2548.              this mode, you may cancel the bulk virus scan, after initiating
  2549.              it, by press the ESC key.
  2550.  
  2551.         To perform a virus scan when viewing the contents of a compressed
  2552.         file, simply press the ALT-Z keys.  When doing a virus scan from
  2553.         within an opened compressed file, SHEZ will also look for embedded
  2554.         compressed files and will perform the scan on files contained within
  2555.         them.  The only exception to this is if you are looking inside an
  2556.         embedded compressed file when you activate the scan, (ALT-Z).  Under
  2557.         this condition SHEZ will only check the files contained in the current
  2558.         compressed file.
  2559.  
  2560.         VIRUS CHECKING SELECTED FILES
  2561.  
  2562.         If you wish to only check a few files contained in a compressed file
  2563.         for viruses, tag the files you wish to check then press the ALT-Z key.
  2564.         Only the tagged files will be checked instead of all in the compressed
  2565.         file.
  2566.  
  2567.         VIRUS SCANNING A DIRECTORY
  2568.  
  2569.  
  2570.                                    SHEZ USER MANUAL                  PAGE -51-
  2571.  
  2572.  
  2573.         When in the DOS directory view screen you may also virus scan an
  2574.         entire directory.  Simply move the highlight bar to the directory you
  2575.         wish to scan and press the ALT-S keys.  SHEZ will use the user defined
  2576.         virus scanning program to scan the files in the highlighted directory.
  2577.  
  2578.  
  2579.                                    SHEZ USER MANUAL                  PAGE -52-
  2580.  
  2581.  
  2582.                                   THE SGREP PROGRAM
  2583.  
  2584.         The SGREP program, supplied with SHEZ, is used by SHEZ when the ALT-G
  2585.         key is pressed, to scan member(s) of a compressed file for words or
  2586.         phrases.  It is included in the SHEZ package .
  2587.  
  2588.         SGREP allows the user to specify two target strings in the search
  2589.         argument.  These two target strings are connected with an and, &, or
  2590.         or, "|" separator.  Thus allowing the user to search for two different
  2591.         strings, or two strings or words contained on the same line.  When the
  2592.         specific string is found, the line in the file that contains the
  2593.         string is written to the stdout DOS device, which is normally the
  2594.         display.  SGREP also has the capability to search the specified
  2595.         file(s) for a regular expression.  When performing a regular
  2596.         expression search only one target may be specified.  See REGULAR
  2597.         EXPRESSIONS below on how to build a regular expression.  The output
  2598.         may be redirected to a file or a printer using the normal DOS
  2599.         redirection symbols.  The format of the SGREP command line is as
  2600.         follows:
  2601.  
  2602.         SGREP [options] "target(s)" {file(s)...|@file}
  2603.  
  2604.         Where options are:
  2605.  
  2606.              -f   display **FILE-NAME for finds only
  2607.              -l   line numbers
  2608.              -c   case sensitive search
  2609.              -x   no logo
  2610.              -e   return errorlevel only
  2611.              -p   pause when screen is full
  2612.              -v   verbose display output
  2613.              -r   target is a regular expression
  2614.  
  2615.         @file indicates an ascii file containing a list of file to process.
  2616.         This list MUST include the complete file specification.  I.E. The
  2617.         disk, directory, filename, and file extension.
  2618.  
  2619.         The target string(s) must be enclosed in quotes and special characters
  2620.         can be specified as indicated below.
  2621.  
  2622.         Hex byte sequences can be used to search for special non-displayable
  2623.         characters.  They are specified using a pair of hexadecimal bytes
  2624.         preceded by a dollar sign,$.
  2625.  
  2626.         EXAMPLES: $23       include is the string #include
  2627.                   $252.50        is the string %2.50
  2628.                   $23$24$25 is the string #$%
  2629.  
  2630.         Two targets may be specified using the & and | characters to search
  2631.         for two targets.  If the & is used the lines must contain
  2632.         both targets.  If the | is used the lines must contain one of the
  2633.         targets.
  2634.  
  2635.         Example:       "save|main"    line must have save or main to be
  2636.         listed.
  2637.                   "save&main"    line must have save and main to be listed.
  2638.  
  2639.         The format of the SGREP command line is presented here for
  2640.         documentation purposes only since SHEZ automatically invokes the SGREP
  2641.  
  2642.  
  2643.  
  2644.                                    SHEZ USER MANUAL                  PAGE -53-
  2645.  
  2646.  
  2647.         itself using a predefined set of options.  SGREP may be run from the
  2648.         DOS command prompt, or when using the ALT-Y command option of SHEZ.
  2649.  
  2650.                                  REGULAR EXPRESSIONS
  2651.  
  2652.         The regular_expression defines the pattern to search for.  Upper- and
  2653.         lower-case are always ignored.  Blank lines never match.  The
  2654.         expression should be quoted to prevent file-name translation.
  2655.  
  2656.         x     An ordinary character (not mentioned below) matches that
  2657.              character.
  2658.         "\"  The backslash quotes any character.  "\$" matches a dollar-sign.
  2659.         "^"  A circumflex at the beginning of an expression matches the
  2660.              beginning of a line.
  2661.         "$"  A dollar-sign at the end of an expression matches the end of a
  2662.              line.
  2663.         "."  A period matches any character except "new-line".
  2664.         "*"  An expression followed by an asterisk matches zero or more
  2665.              occurrances of that expression: "fo*" matches "f", "fo"  "foo",
  2666.              etc.
  2667.         "+"  An expression followed by a plus sign matches one or more
  2668.              occurrances of that expression: "fo+" matches "fo", etc.
  2669.         "-"  An expression followed by a minus sign optionally matches the
  2670.              expression.
  2671.  
  2672.         "[]" A string enclosed in square brackets matches any character in
  2673.              that string, but no others.  If the first character in the string
  2674.              is a circumflex, the expression matches any character except
  2675.              "new-line" and the characters in the string.  For  example,
  2676.              "[xyz]" matches "xx" and "zyx", while "[^xyz]"      matches "abc"
  2677.              but not "axb".  A range of characters may be specified by two
  2678.              characters separated by "-".  Note that, [a-z] matches
  2679.              alphabetics, while [z-a] never matches.
  2680.  
  2681.  
  2682.                                    SHEZ USER MANUAL                  PAGE -54-
  2683.  
  2684.  
  2685.                                  THE DUMPMAC PROGRAM
  2686.  
  2687.  
  2688.         The DUMPMAC program is a small program designed to dump a saved macro
  2689.         file to the DOS stdout device, normally the screen, and list the
  2690.         recorded keystrokes in readable form.  The command line format is:
  2691.  
  2692.         DUMPMAC macro-file-name
  2693.  
  2694.         The output of the program is self explanatory, and can be used to
  2695.         debug or list unknown SHEZ macro files.
  2696.  
  2697.  
  2698.                                    SHEZ USER MANUAL                  PAGE -55-
  2699.  
  2700.  
  2701.                                  THE SHEZCFG PROGRAM
  2702.  
  2703.         The SHEZCFG program is now fully menu driven and contains full online
  2704.         help.  As you modify information on each screen be sure to press the
  2705.         F10 key to save each entry screen.  After going through all the
  2706.         configuration items be sure to select the "A" menu item to save your
  2707.         configuration information.
  2708.  
  2709.         THE SHEZCFG PROGRAM MUST BE RUN TO CREATE A CONFIGURATION FILE OR SHEZ
  2710.         WILL NOT RUN!!
  2711.  
  2712.         After creating a shez configuration file you may place the
  2713.         configuration file into a directory that is specified in your PATH
  2714.         statement.
  2715.  
  2716.         Shez will find its configuration file as follows:
  2717.  
  2718.              If the SHEZCFG environment variable is set SHEZ will use the
  2719.              configuration file that has been specified by the environment
  2720.              variable.
  2721.              If the SHEZCFG environment varialble has not been set Shez will
  2722.              search the directories in your PATH looking for a file named
  2723.              SHEZ.CFG.
  2724.  
  2725.              If a valid configuration file can not be located SHEZ will not
  2726.              run!!!!!
  2727.  
  2728.  
  2729.                             CONFIGURING FOR VIRUS SCANNING
  2730.  
  2731.         Under the program options, you will be asked if you wish to configure
  2732.         SHEZ to scan .COM and .EXE files contained in compressed files for
  2733.         viruses. If you respond Y, SHEZ will that ask you where the virus
  2734.         checking program can be found.  The programs that SHEZ supports are,
  2735.         SCAN.EXE version 39 or greater, produced by McAfee Associates, and the
  2736.         virus scanning program by Central Point.  When prompted enter the
  2737.         complete DISK:\DIRECTORY\FILENAME.EXT of where the virus scanning
  2738.         program is located.  It is advised that you place the SCAN program on
  2739.         a write protected floppy disk to prevent it from being infected.  You
  2740.         may also optionally enter any additional command line options that the
  2741.         virus scanning program requires.  The optional parameters are entered
  2742.         after the SHEZCFG prompts for them.
  2743.  
  2744.         If you use the /report feature of McAfee"s virus scanning program, and
  2745.         you use the SHEZLOG feature, as explained in the section titled
  2746.         PREFORMING A VIRUS SCAN on page 49. PLEASE BE SURE TO specify two
  2747.         different files names.  If they are both pointing to the same file the
  2748.         results will be unpredictable.
  2749.  
  2750.         PLEASE NOTE: SHEZ WILL NOT SEARCH YOUR PATH FOR THE SCAN PROGRAM.  IF
  2751.         YOU DO NOT TELL IT EXACTLY WHERE TO FIND IT SHEZ WILL BE UNABLE TO
  2752.         EXECUTE THE PROGRAM.
  2753.  
  2754.  
  2755.                                  COMPATIBILITY ISSUES
  2756.  
  2757.  
  2758.                                    SHEZ USER MANUAL                  PAGE -56-
  2759.  
  2760.  
  2761.         SHEZ achieves fast screen updates buy writing directly to video buffer
  2762.         memory.  If your machine is not 100% compatible you can force SHEZ to
  2763.         use BIOS routines to update the screen.  This is accomplished by
  2764.         setting an environment variable BIOS equal to Y. I.E. SET BIOS=Y. Do
  2765.         this before executing SHEZ.
  2766.  
  2767.         For monochrome monitors a similar method is employed set the
  2768.         environment variable MONO equal to Y.  I.E.  SET MONO=Y.
  2769.  
  2770.         Some clone machines have a bug in the builtin BIOS routines that will
  2771.         cause SHEZ to hang if you have exploding windows turned on.  If you
  2772.         experience a machine lock up, try reconfiguring SHEZ and turn the
  2773.         exploding windows off.
  2774.  
  2775.                                 DESQVIEW COMPATIBILITY
  2776.  
  2777.         SHEZ is now DESQview aware.  When setting SHEZ up under DESQview set
  2778.         the parameter WRITE DIRECTLY TO SCREEN to NO, and USES OWN COLORS to
  2779.         YES.  SHEZ will also automatically release its timeslice to Desqview
  2780.         when waiting for keyboard input.
  2781.  
  2782.                             WINDOWS AND OS/2 COMPATIBILITY
  2783.  
  2784.         SHEZ has been tested under Windows 3.1 and OS/2 2.X.  When running
  2785.         under OS/2 or Windows enhanced mode, SHEZ will automatically release
  2786.         its timeslice to the operating system when waiting for keyboard input.
  2787.  
  2788.  
  2789.                                    SHEZ USER MANUAL                  PAGE -57-
  2790.  
  2791.  
  2792.                              SWAPPING SHEZ OUT OF MEMORY
  2793.  
  2794.         This section briefly describes how SHEZ swaps itself out of memory to
  2795.         make room for other programs.  It also describes how the user can
  2796.         configure SHEZ to perform its swapping function.
  2797.  
  2798.         When you configure SHEZ to swap itself out of memory when running
  2799.         other programs, SHEZ first looks to see if your system has EMS or XMS
  2800.         memory installed. If there is EMS or XMS memory, and there is a
  2801.         sufficient amount of EMS or XMS memory, SHEZ will copy most of its
  2802.         code to EMS  or XMS memory then free up enough memory to run another
  2803.         program.  After the other program has ended SHEZ then swaps itself
  2804.         back into memory.
  2805.  
  2806.         As a default SHEZ will first look to see of XMS memory is available.
  2807.         If XMS is available and there is a sufficient amount of XMS memory
  2808.         SHEZ will swap itself to XMS memory.  If XMS memory is not available,
  2809.         or there is not enough XMS memory available, SHEZ will them look for
  2810.         EMS memory.  If EMS memory is available, and there is sufficient EMS
  2811.         memory, SHEZ will swap itself into EMS memory.  If EMS memory is not
  2812.         available, or there is not enough EMS memory available SHEZ will then
  2813.         swap itself to disk.
  2814.  
  2815.         If EMS or XMS memory is not available, or there is not enough EMS or
  2816.         XMS memory, SHEZ will then use your DISK to swap itself out of memory.
  2817.         It allocates disk space on the currently active drive and in the
  2818.         current directory.  When SHEZ swaps to disk it can conflict with some
  2819.         compression operations.
  2820.  
  2821.         To solve this problem the SHEZCFG program allows you to tell SHEZ, HOW
  2822.         AND WHERE TO SWAP itself.  The SHEZCFG program allows you to tell SHEZ
  2823.         the DISK and DIRECTORY of where to build its swapper file if it needs
  2824.         to swap to disk.
  2825.  
  2826.         IT IS HIGHLY RECOMMENDED THAT YOU CREATE A SEPARATE AND UNIQUE
  2827.         DIRECTORY ON YOUR HARD DRIVE FOR SHEZ TO USE WHEN SWAPPING TO DISK.
  2828.         THIS DIRECTORY SHOULD NOT HAVE ANY FILES IN THE DIRECTORY. USING THE
  2829.         SHEZCFG PROGRAM, TELL SHEZ THE LOCATION AND THE NAME OF THIS
  2830.         DIRECTORY.  THEN IF SHEZ NEEDS TO SWAP TO DISK IT WILL PLACE THE
  2831.         SWAPPER FILE INTO THIS UNIQUE DIRECTORY, AND AFTER THE SWAP FUNCTION
  2832.         IS COMPLETE IT WILL REMOVE THE SWAPPER FILE.
  2833.  
  2834.         The SHEZCFG program also allows you to tell SHEZ to ignore EMS or XMS
  2835.         memory, even if you have EMS and/or XMS memory installed, and always
  2836.         swap to disk.
  2837.  
  2838.         Since these option are new in release 6.1
  2839.  
  2840.         PLEASE RUN THE SHEZCFG PROGRAM AND SET THE SWAPPING OPTIONS TO YOUR
  2841.         PERSONAL NEEDS.
  2842.  
  2843.         The swapping options can be found under the ADDITIONAL SETUP
  2844.         INFORMATION menu item.  You can tell SHEZ to use XMS, EMS, and disk
  2845.         for swapping.  If you specify all three XMS will be tested first, then
  2846.         EMS, then disk.
  2847.  
  2848.  
  2849.                              USING EMS/XMS MEMORY IN SHEZ
  2850.  
  2851.  
  2852.                                    SHEZ USER MANUAL                  PAGE -58-
  2853.  
  2854.  
  2855.         Beginning with release 7.0 of SHEZ, SHEZ can now use 65K of XMS or EMS
  2856.         memory to reduce its DOS memory requirements.  The XMS/EMS memory is
  2857.         used for temporary storage areas, thus reducing the amount of DOS
  2858.         memory SHEZ needs.  The XMS/EMS memory will be released when you exit
  2859.         SHEZ.  If SHEZ uses EMS memory, it will also use a portion of the
  2860.         allocated EMS memory as a file buffer area when copying files from the
  2861.         DOS directory display.  This will significantly speed up the copy
  2862.         operations, so it is recommenced to use EMS memory if it is available.
  2863.  
  2864.         EMS / XMS memory usage can be configured through the SHEZCFG program
  2865.         via the ADDITIONAL SETUP INFORMATION menu item.  Shown below is the
  2866.         EMS/XMS configuration option as it will appear on the screen:
  2867.  
  2868.  
  2869.         SHEZ can use EMS or XMS memory to reduce its memory
  2870.  
  2871.         requirements.  SHEZ will first try to use EMS and then XMS if
  2872.  
  2873.         EMS memory is not available.  You can tell SHEZ to only use EMS,
  2874.  
  2875.         only use XMS, not to use either, or to try XMS first then EMS.
  2876.  
  2877.  
  2878.         At the prompt enter EX to use EMS then XMS,
  2879.              OR  enter XE to use XMS then EMS,
  2880.              OR  enter E  to use only EMS,
  2881.              OR  enter X  to use only XMS,
  2882.              OR  enter to spaces to not use EMS or XMS.
  2883.  
  2884.         Enter EMS-XMS usage as described above->EX
  2885.  
  2886.  
  2887.         You can over-ride the memory usage options through the use of
  2888.         environment variables.  See the section titled ENVIRONMENT VARIABLE
  2889.         for more information.
  2890.  
  2891.  
  2892.  
  2893.                                    SHEZ USER MANUAL                  PAGE -59-
  2894.  
  2895.  
  2896.                               SPEECH FRIENDLY INTERFACE
  2897.  
  2898.         Release 7.1 of SHEZ implements a new feature called Speech Friendly
  2899.         Interface, (SFI).  This feature makes SHEZ more friendly to users with
  2900.         speech synthesizer boards, (these enable the blind users to read the
  2901.         computer display).  The SFI interface has been implemented in three
  2902.         parts. In addition the Copyright box will not appear in the upper
  2903.         right corner of the display, leaving the screen a little cleaner.
  2904.  
  2905.         The first SFI feature is that most dialog boxes, error message boxes
  2906.         and informational boxes will be displayed using DOS BIOS routines
  2907.         instead of writing directly to the video buffers.  This feature should
  2908.         make interfacing SHEZ to a speech synthesizer a little eaiser.
  2909.  
  2910.         The second SFI feature will position the cursor on the currently
  2911.         active screen line. This feature has been implemented when viewing the
  2912.         DOS directory listing, the compressed files listing, the help screens,
  2913.         and the drop down menu system.  When possible the cursor will be
  2914.         placed to the right of the first pertinent data appearing on the
  2915.         screen.
  2916.  
  2917.         However there are some dialog boxes, and prompt boxes that this
  2918.         positioning is not 100% accurate.  To solve this problem, the third
  2919.         part of the SFI interface includes the ability to "FREEZE" the screen,
  2920.         and use the cursor keys to walk around the screen.
  2921.  
  2922.         To freeze the screen press the ` (left single quote character). This
  2923.         will place the screen in a frozen state UNTIL YOU PRESS THE ` KEY
  2924.         AGAIN. When the freeze frame is activated a low to high beep sound
  2925.         will be made.  When exiting the freeze frame feature a high to low
  2926.         beep will be made. While in the frozen state the following cursor
  2927.         movement keys are active:
  2928.  
  2929.         CURSOR-UP =    move cursor up one line
  2930.         CURSOR-DOWN    =    move cursor down one line
  2931.         CURSOR-LEFT    =    move cursor left on character
  2932.         CURSOR-RIGHT   =    move cursor right one character
  2933.         PAGE-UP   =    move cursor to upper left corner of screen
  2934.         PAGE-DOWN =    move cursor to lower left corner of screen
  2935.         CONTROL-HOME   =    move cursor to first significant character on
  2936.                             current line. (A significant character is a
  2937.                             character having an ascii code greater then a
  2938.                             decimal 20, and less than a decimal 123)
  2939.         HOME      =    move cursor to where is originally was before you
  2940.                        started fussing with it.
  2941.  
  2942.         The SFI support routines are activated by using the SHEZCFG program,
  2943.         and setting the SFI option to Y.
  2944.  
  2945.  
  2946.                                 4DOS AND NDOS SUPPORT
  2947.  
  2948.         Shez offers limited support for certain capabilities when running
  2949.         under 4DOS and NDOS.  Shez can automatically determine if it is
  2950.         running under either of these systems and will active support for
  2951.         their facilities automatically.  The following facilities are
  2952.         supported:
  2953.  
  2954.  
  2955.                                    SHEZ USER MANUAL                  PAGE -60-
  2956.  
  2957.  
  2958.         1)   When viewing a DOS directory display pressing the ALT-D keys will
  2959.              display the 4DOS/NDOS description entries if any exist.
  2960.  
  2961.         2)   When viewing a DOS directory display pressing the ALT-U keys will
  2962.              allow you to UPDATE and/or ADD description entries to the
  2963.              currently highlighted file.  This will also active the ALT-D
  2964.              option automatically.  When adding a description to a file if the
  2965.              4DOS/NDOS DESCRIPT.ION file does not exist one will be created,
  2966.              if the file already exists it will be updated.
  2967.  
  2968.         3)   When copying, moving, or renaming files the 4DOS/NDOS description
  2969.              will be carried along with the file.  If the file is renamed the
  2970.              entry in the DESCIPT.ION file will be modified accordingly.
  2971.  
  2972.         4)   AT THE CURRENT TIME SHEZ DOES NOT MODIFY THE DESCIPT.ION FILE
  2973.              WHEN YOU DELETE A FILE.  THE FILES DESCRIPTION WILL REMAIN IN THE
  2974.              4DOS/NDOS DESCRIPT.ION FILE.
  2975.  
  2976.                            USING 4DOS INTERNAL LIST COMMAND
  2977.  
  2978.         SHEZ can be configured to use the internal LIST command of 4DOS as the
  2979.         default file viewer.  To configure SHEZ for this feature, use the
  2980.         SHEZCFG program and select option 5 and press F10 until the menu
  2981.         titled OTHER PROGRAMS TO USE appears.  Answer Y to the question, "When
  2982.         running under 4DOS use 4DOS internal list command".  You may also
  2983.         enter blanks in the area that asks for the Viewing-program to use.
  2984.  
  2985.  
  2986.                                    SHEZ USER MANUAL                  PAGE -61-
  2987.  
  2988.  
  2989.                             SUPPORT FOR SPANNED ZIP FILES
  2990.  
  2991.         SHEZ now offers support for ZIP files that span multiple floppies.
  2992.         Due to the nature of these types of ZIP files SHEZ will limit the
  2993.         operations that can be performed on spanned ZIP files.  SHEZ will
  2994.         allow you to create spanned ZIP files and extract from spanned ZIP
  2995.         files, but SHEZ will not allow you to modify the ZIP file after it is
  2996.         created.  You may not ADD, DELETE, RENAME, CONVERT, or add comments to
  2997.         the spanned file.  If you attempt to perform an illegal operation SHEZ
  2998.         will display a dialog box informing you that the operation selected
  2999.         can not be performed.  Also it should be noted that SHEZ, in it's
  3000.         current release, can only handle a maximum of 3500 files per
  3001.         compressed file.  If you create a spanned ZIP file containing more
  3002.         than 3500 files SHEZ can only process the first 3500 files it finds in
  3003.         the ZIP file.
  3004.  
  3005.         Normally when you extract files from a spanned ZIP file PKUNZIP will
  3006.         ask that you insert the last disk of the backup set first.  SHEZ
  3007.         operates just the reverse.  When reading spanned ZIP files SHEZ will
  3008.         ask that you insert the first disk of the backup set and each
  3009.         subsequent disk.  In effect it reads the ZIP from front to back.  This
  3010.         may seem strange, but when SHEZ is done reading the spanned ZIP file
  3011.         the last disk of the backup set will already be in the drive, so when
  3012.         you perform an extract you will not have to insert the last disk of
  3013.         the set as required by PKUNZIP.
  3014.  
  3015.         Support was added for spanned ZIP files due to numerous user requests.
  3016.         If you are using the spanned disk feature to backup a hard drive
  3017.         please keep in mind that SHEZ will only be able to handle a maximum of
  3018.         3500 files in the ZIP file.
  3019.  
  3020.  
  3021.                            SUPPORT FOR UC2 COMPRESSED FILES
  3022.  
  3023.         SHEZ now offers support for UC2, Ultracompressor II, type compressed
  3024.         files.  SHEZ can convert to/from UC2 compressed files to/from any
  3025.         other compressed file format without the need of the file conversion
  3026.         .BAT files that are distributed with the UC2 package.  There is a
  3027.         special menu item that allows you to configure the UC2 program via
  3028.         it's internal configuration option.  The menu item is contained in the
  3029.         Opts main menu and is titled, FULL UC2 CONFIGURATION.  When
  3030.         configuring SHEZ please be sure to specify the UC.EXE file as the
  3031.         program to run when processing UC2 type compressed files.  Since SHEZ
  3032.         has it's own memory management routines builtin you do not need to use
  3033.         the Stealth technology that is available in the UC2 package.
  3034.  
  3035.         Since UC2 currently does not support FRESHEN and UPDATE commands SHEZ
  3036.         will issue an warning message if you attempt to perform these
  3037.         functions on UC2 files.  SHEZ does support the storing and retrieval
  3038.         of "file versions" as documented in the UC2 manual.  It also supports
  3039.         storing and retrieval of files stored in directories within UC2 files.
  3040.  
  3041.  
  3042.                                    SHEZ USER MANUAL                  PAGE -62-
  3043.  
  3044.  
  3045.                         WHERE TO FIND THE MOST CURRENT VERSION
  3046.  
  3047.         The following BBS"s are distribution points. In addition you can leave
  3048.         mail on these system for me if you need technical assistance.
  3049.  
  3050.         Kandy Shack         (714)636-2667  Main Distribution and Mail point.
  3051.         Crackers Paradise        (707)838-4483  Alternate Distribution and
  3052.         Mail points.
  3053.  
  3054.         Additional Distributions Points.
  3055.  
  3056.         Space BBS      (415)323-4398
  3057.         EXEC-PC        (414)964-5160
  3058.         MicroSellar         (201)239-1346
  3059.         Vern Buerg"s Bit Boutique     (707)778-8944
  3060.         Baudeville BBS      (416)283-6059  Canada Distribution Point
  3061.         Comupserve          In the IBMSYS Forum Library 6, keyword of SHEZ
  3062.         Genie               In the IBM roundtable.
  3063.  
  3064.                                     OVERSEAS AGENT
  3065.  
  3066.  
  3067.         Ensing BBS
  3068.         Postbus 4
  3069.         NL-9617 ZG Harkstede
  3070.         The Netherlands
  3071.         Gert Ensing is the sysop and is also an Overseas Agent for
  3072.         registration of SHEZ.
  3073.         +31 5904-1913
  3074.         +31 5904-1388
  3075.         +31 5904-2135
  3076.         +31 5904-2733
  3077.  
  3078.  
  3079.                                    SHEZ USER MANUAL                  PAGE -63-
  3080.  
  3081.  
  3082.                                    ASP HUB NETWORK
  3083.  
  3084.         In an effort to make it easier for you to obtain your favorite
  3085.         software,  the latest updates of many ASP authored programs can be
  3086.         found on the BBSs  listed below.  These BBSs are members of the ASP
  3087.         Hub Network (AHN).
  3088.  
  3089.  
  3090.         Zone 1 - East Coast USA
  3091.  
  3092.              North-East Coast              Mid-East Coast
  3093.  
  3094.         [Site #1]                [Site #2]
  3095.              The Consultant BBS            The Break RBBS <East>
  3096.              Jay Caplan               Bruce Jackson
  3097.              P.O. Box 8571            4660 Whitaker PL
  3098.              New York NY 10116-4655        Dale City, VA 22193-3011
  3099.              Data1) 718-837-3236      Data1) 703-680-9269
  3100.              Data2)                   Data2) 703-551-0000
  3101.  
  3102.         Zone 2 - North Mid-USA        Zone 3 - Southern Mid-USA
  3103.  
  3104.         [Site #3]                [Site #4]
  3105.              The Twilight Zone             The DataExchange BBS
  3106.              John Hrusovszky               Don Morris
  3107.              1119 E. Main St               119 Herring St.
  3108.              Auburndale, WI 54412          Leesville, LA 71446
  3109.              Data1) 715-652-2758      Data1) 318-239-2122
  3110.              Data2)                   Data2)
  3111.  
  3112.         Zone 4 - West Coast USA
  3113.  
  3114.         [Site #5]                [Site #6]
  3115.              Attention to Details BBS      Space BBS
  3116.              Clint Bradford           Owen Hawkins
  3117.              5085 Trail Canyon Dr          PO Box 260
  3118.              Mira Loma CA 91752       Menlo Park, CA 94026
  3119.              Data1) 714-681-6221      Data1) 415-323-4398  (1)
  3120.              Data2)                   Data2) 415-323-4193  (2)
  3121.  
  3122.         Zone 5 - Canada                    (1) ASP file downloading only
  3123.                                  (2) ASP author uploading &
  3124.         [Site #7]                     main public BBS number.
  3125.              Knightec BBS
  3126.              Phil Knight
  3127.              35 Robb Blvd #6
  3128.              Orangeville, ONT L9W 3L1
  3129.              Data1) 519-940-0007
  3130.              Data2)
  3131.  
  3132.  
  3133.         These BBSs are bound by special agreement with the ASP. In the case of
  3134.         a dispute contact the ASP Omsbudsman.
  3135.  
  3136.  
  3137.  
  3138.                                    SHEZ USER MANUAL                  PAGE -64-
  3139.  
  3140.  
  3141.                             SUPPORT FOR SHEZ AND QUESTIONS
  3142.  
  3143.         Support can be obtained in three ways.  If you have access to CSERVE
  3144.         please send your questions to me via Easyplex.  (type GO MAIL at the
  3145.         Cserve prompt) My userid is 76266,2634. This is the preferred method,
  3146.         I check for mail twice a week and will get back to you with an answer
  3147.         usually within a week.  You may also contact me via the GENIE network,
  3148.         my GENIE mail id is J.DERR1.  If you do not have access to CSERVE or
  3149.         GENIE send a note, letter, postcard to the address show below.
  3150.         Register users have priority but I will try to help anyone in need.
  3151.         Support can also be obtained via the INTERNET.  Send your questions or
  3152.         comments to JIM.DERR@KANDY.COM.
  3153.  
  3154.         You may also receive support by calling California Software Design at
  3155.         (707) 575-9868.
  3156.  
  3157.         California Software Design
  3158.         P.O. Box 15248
  3159.         Santa Rosa, CA 94502
  3160.  
  3161.  
  3162.                                    SHEZ USER MANUAL                  PAGE -65-
  3163.  
  3164.  
  3165.                             COMMANDS SORTED BY DESCRIPTION
  3166.  
  3167.  
  3168.         ALT-D . . . .  4DOS/NDOS description display
  3169.         ALT-A . . . .  Add a list of files
  3170.         ALT-A . . . .  Modify file Attributes
  3171.         A . . . . . .  Add file(s) to compressed
  3172.         ALT-C . . . .  Add/update file comments
  3173.         S . . . . . .  Add\Update comment records for highlighted file
  3174.         SFT-S . . . .  Add\Update file records for all files in compressed
  3175.         file.
  3176.         CTL-ENTER . .  Alternate File Viewer
  3177.         ALT-B . . . .  Browse any file
  3178.         ALT-Z . . . .  Check files in all tagged compressed files for viruses.
  3179.         CTL-Z . . . .  Check files in all tagged compressed files for viruses,
  3180.         . . . . . . .  plus strip comments out of any tagged .ZIP files.
  3181.         ALT-Z . . . .  Check for viruses
  3182.         CTL-V . . . .  Convert all tagged archive files to another format.
  3183.         ALT-V . . . .  Convert highlighted archive file to another format.
  3184.         CTL-V . . . .  Convert sfx file.
  3185.         CTL-F2  . . .  Copy highlighted file
  3186.         CTL-F2  . . .  Copy tagged files
  3187.         CTL-Y . . . .  Copy tagged files from one Compress file to another.
  3188.         F7  . . . . .  Create new compressed file
  3189.         ALT-D . . . .  Delete all extracted files
  3190.         SFT-F4  . . .  Delete all tagged files
  3191.         F4  . . . . .  Delete highlighted file/Dir
  3192.         D . . . . . .  Delete highlighted file
  3193.         CTL-D . . . .  Delete tagged files
  3194.         Enter . . . .  Display directory contents or Display file contents.
  3195.         / . . . . . .  Display menu bar
  3196.         ALT-P . . . .  Drive:path to extract into
  3197.         F8  . . . . .  EDIT SELECTED FILE
  3198.         ALT-N . . . .  Extract all NEWER files
  3199.         ALT-X . . . .  Extract all files
  3200.         CTL-E . . . .  Extract all tagged files
  3201.         ALT-E . . . .  Extract specified file(s)
  3202.         E . . . . . .  Extract the highlighted file
  3203.         ALT-0 . . . .  Flush macro
  3204.         ALT-F . . . .  Freshen a list of files
  3205.         F . . . . . .  Freshen file(s) in compressed
  3206.         F1  . . . . .  HELP
  3207.         TAB . . . . .  Hot directory display
  3208.         ALT-Q . . . .  Immediately exit SHEZ
  3209.         CTL-X . . . .  Immediately exit to extract path
  3210.         ALT-8 . . . .  Load and run macro
  3211.         ALT-7 . . . .  Macro Playback
  3212.         ALT-5 . . . .  Macro pause
  3213.         F8  . . . . .  Make Self Extracting file from highlighted file
  3214.         SFT-F8  . . .  Make Self Extracting files from all tagged files.
  3215.         / . . . . . .  Menu display
  3216.         ALT-M . . . .  Move a list of files
  3217.         M . . . . . .  Move file(s) to compressed
  3218.         CTL-F3  . . .  Move highlighted file
  3219.         SFT-F3  . . .  Move tagged files
  3220.         G . . . . . .  Password for compressed file
  3221.         CTL-P . . . .  Print functions
  3222.         CTL-F6  . . .  Rename file
  3223.  
  3224.  
  3225.  
  3226.                                    SHEZ USER MANUAL                  PAGE -66-
  3227.  
  3228.  
  3229.         SFT-F6  . . .  Rename tagged files
  3230.         ALT-R . . . .  Reread the directory.
  3231.         ALT-G . . . .  Run GREP against file(s)
  3232.         ALT-Y . . . .  Run a program against tagged file(s)
  3233.         ALT-F . . . .  Run PKZIPFIX against currently highlighted file.
  3234.         R . . . . . .  Run the highlighted file
  3235.         Z . . . . . .  SPECIFY compressed FILE MASK
  3236.         ALT-9 . . . .  Save macro to file
  3237.         F5  . . . . .  Execute highlighted program file
  3238.         I . . . . . .  Show info about archive file
  3239.         ALT-F2  . . .  Smart copy
  3240.         ALT-F2         Smart Extract
  3241.         F9  . . . . .  Sort archive listing
  3242.         F6  . . . . .  Sort the file display
  3243.         P . . . . . .  Specify Path options
  3244.         ALT-S . . . .  Speed search
  3245.         ALT-6 . . . .  Start/Stop macro recording
  3246.         F2  . . . . .  Switch to another archive File or directory
  3247.         CTL-SPACE . .  Tag all files
  3248.         CTL-T . . . .  Tag all files.
  3249.         + . . . . . .  Tag highlighted file
  3250.         ALT-+ . . . .  Tag highlighted file
  3251.         F10 . . . . .  Temporary exit to DOS
  3252.         T . . . . . .  Test archive integrity
  3253.         F6  . . . . .  Toggle $.$ and *.*
  3254.         ALT-1 . . . .  Toggle authenticity mode
  3255.         O . . . . . .  Toggle overwrite for extract
  3256.         SPACE . . . .  Toggle tag status
  3257.         ALT-T . . . .  Toggle tagged file status line
  3258.         CTL-U . . . .  Untag all files
  3259.         - . . . . . .  Untag highlighted file
  3260.         ALT-- . . . .  Untab hightlighed file
  3261.         ALT-U . . . .  Update a list of files
  3262.         CTL-T . . . .  Update archive file time&date
  3263.         U . . . . . .  Update file in archive
  3264.         ALT-F8  . . .  UUENCODE file(s)
  3265.         CTL-F8  . . .  UUDECODE file(s)
  3266.         ALT-V . . . .  View file comment records
  3267.         CTL-D . . . .  View FILE_ID.ZIP file
  3268.         F3  . . . . .  View highlighted file
  3269.         V|RET . . . .  View the file
  3270.         ALT-S . . . .  Virus scan highlighted directory.
  3271.         ALT-W . . . .  Write SHEZ.CFG file.
  3272.         ALT-M . . . .  ZOOM / UNZOOM DOS Directory window
  3273.  
  3274.  
  3275.  
  3276.                                    SHEZ USER MANUAL                  PAGE -67-
  3277.  
  3278.  
  3279.                            LICENSING SHEZ FOR PERSONAL USE
  3280.  
  3281.         Shez is marketed as a shareware program.  This marketing method gives
  3282.         the user the opportunity to evaluate the program before actually
  3283.         registering the software.  If after a two week evaluation period you
  3284.         determine that SHEZ meets your needs, you are required to register
  3285.         your copy of SHEZ with California Software Design.  To register your
  3286.         copy of SHEZ, complete the registration form that is distributed with
  3287.         the SHEZ package, include your payment and mail to California Software
  3288.         Design, P.O. Box 15248, Santa Rosa, CA 95402.
  3289.  
  3290.         You may also register SHEZ via the Compuserve shareware registration
  3291.         service.  See the SHEZ.REG file included with this package for
  3292.         information on how to use this service.
  3293.  
  3294.         When your registration form is processed you will be mailed an
  3295.         individual serial number, along with a receipt for your registration
  3296.         fee.
  3297.  
  3298.                           CORPORATE SITE LICENSING FOR SHEZ
  3299.  
  3300.         A license is required for use of SHEZ by corporations and
  3301.         institutions.
  3302.  
  3303.  
  3304.         You may obtain a license for the use of SHEZ by writing to me.  The
  3305.         license is for perpetual, nonexclusive use of any version.  Purchase
  3306.         orders and invoicing are acceptable.  A license agreement form will be
  3307.         sent upon request.  You may use it, or supply your own for my review.
  3308.         There are no restrictions to the number of sites, or for use on local
  3309.         area networks.  If you have special requirements, or need
  3310.         customization, please feel free to submit them in writing.  You may
  3311.         request a license for:
  3312.  
  3313.         1)   A fixed number of copies, see the discount schedule;
  3314.         2)   An unlimited number of copies, the minimum fee is $1200;
  3315.         3)   Customization of messages and documentation,  an additional fee
  3316.              may be required depending on the extent of changes;
  3317.         4)   Permission to distribute within your organization;
  3318.  
  3319.         The fee for a license depends on the estimated number of copies of the
  3320.         program that you will use.  To use the discount schedule below,
  3321.         estimate the total number of copies that you may eventually use.
  3322.  
  3323.         Number of users(copies)  Price per copy
  3324.         1  to  10           $39.00
  3325.         11 to  30           $35.00
  3326.         31 and up           $31.00
  3327.         Please contact California Software Design for site license prices.
  3328.  
  3329.         Regardless of the quantity, only one set of materials will be sent to
  3330.         you.  You may then make as many copies of it that are licensed.
  3331.         Upgrades will be made available upon request.  Technical support is
  3332.         available via mail, or contacting me via Compuserve 76266,2634, on
  3333.         GENIE mail id is J.DERR1. OR via Internet. My internet address is
  3334.         JIM.DERR@KANDY.COM
  3335.  
  3336.  
  3337.  
  3338.                                    SHEZ USER MANUAL                  PAGE -68-
  3339.  
  3340.  
  3341.                               APPENDIX - 1 - ERROR CODES
  3342.  
  3343.  
  3344.         ERROR CODES WHEN ATTEMPTING TO SWAP
  3345.  
  3346.         0-255         :The EXECed Program"s return code
  3347.  
  3348.         257       :Error preparing for swap: no space for swapping
  3349.         258       :Error preparing for swap: program too low in memory
  3350.         512       :Program file not found
  3351.         513       :Program file: Invalid drive
  3352.         514       :Program file: Invalid path
  3353.         515       :Program file: Invalid name
  3354.         516       :Program file: Invalid drive letter
  3355.         517       :Program file: Path too long
  3356.         518       :Program file: Drive not ready
  3357.         519       :Batchfile/COMMAND: COMMAND.COM not found
  3358.         520       :Error allocating temporary buffer
  3359.  
  3360.         768 & GREATER :DOS-error-code xx calling EXEC
  3361.  
  3362.         1024      :Error allocating environment buffer
  3363.  
  3364.         1280      :Swapping requested, but prep_swap has not
  3365.                   :been called or returned an error.
  3366.  
  3367.         1281      :MCBs don"t match expected setup
  3368.         1282      :Error while swapping out
  3369.  
  3370.         1536      :Redirection syntax error
  3371.         1537 & GREATER      :DOS error xx on redirection
  3372.  
  3373.  
  3374.         PKZIP ERROR CODES
  3375.  
  3376.         1         :Bad file name of file specification
  3377.         2-3       :Error in ZIP file
  3378.         4-11      :Insufficient memory
  3379.         12        :No files were found to add to the ZIP file or
  3380.                   no files were specified for deletion.
  3381.  
  3382.         13        :File not found.  The specified ZIP file or list file was
  3383.         not found.
  3384.         14        :Disk full
  3385.         15        :Zip file is read-only and can not be modified.
  3386.         16        :Bad or illegal parameters specified.
  3387.         17        :Too many files.
  3388.  
  3389.  
  3390.         PKUNZIP ERROR CODES
  3391.  
  3392.         1         :Warning error (such as failed CRC check)
  3393.         2-3       :Error in ZIP file
  3394.         4-8       :Insufficient memory
  3395.         9         :File not found. No zip files found.
  3396.         10        :Bad or illegal parameters specified.
  3397.         11        :No files found to extract/view etc.
  3398.         50        :Disk full
  3399.  
  3400.  
  3401.  
  3402.                                    SHEZ USER MANUAL                  PAGE -69-
  3403.  
  3404.  
  3405.         51        :Unexpected end of file in ZIP file.
  3406.  
  3407.  
  3408.                                    SHEZ USER MANUAL                  PAGE -70-
  3409.  
  3410.  
  3411.         ARJ ERROR CODES
  3412.  
  3413.         1         :Warning Specified file to add not found
  3414.                   Specified file to list, extract, etc., not found
  3415.                   or answering negatively to "OK TO PROCEED TO NEXT VOLUME"
  3416.         prompt
  3417.  
  3418.         2         :Fatal error
  3419.         3         :CRC error
  3420.         4         :ARJ-SECURITY error or attempt to update an ARJ-SECURED
  3421.         archive.
  3422.         5         :Disk full or write error
  3423.         6         :Can"t open archive or file
  3424.         7         :Simple user error (bad parameters)
  3425.         8         :Not enough memory
  3426.  
  3427.         LHARC ERROR CODES
  3428.  
  3429.         1         :CRC error
  3430.         2         :Fatal error.
  3431.         3         :Failed to write tempory files in the archive.
  3432.  
  3433.  
  3434.         PKUNPAK ERROR CODES
  3435.  
  3436.         1         :Bad CRC warning
  3437.         2         :Out of memory
  3438.         3         :No archives found to extract
  3439.         4         :Can"t open archive file
  3440.         5         :Read error on archive
  3441.         6         :Internal table overflow
  3442.         7         :Disk Full
  3443.  
  3444.  
  3445.         PAK ERROR CODES
  3446.  
  3447.         1         :CRC error
  3448.         2         :Out of memory
  3449.         7         :Disk Full
  3450.  
  3451.  
  3452.                                    SHEZ USER MANUAL                  PAGE -71-
  3453.  
  3454.  
  3455.         ERROR CODES WHEN FORMATTING A DISK
  3456.  
  3457.         1         :Invalid disk parameter
  3458.         2         :Address mark not found
  3459.         3         :Write protect error
  3460.         4         :Requested sector not found
  3461.         6         :Disk change line active
  3462.         7         :Wrong capacity for drive
  3463.         8         :DMA overrun
  3464.         9         :DMA boundary error
  3465.         10        :Bad disk/cap=1.4 w/720k disk or write protected disk
  3466.         11        :Bad sectors found and marked
  3467.         12        :Drive type not supported.
  3468.         12        :Media type not found
  3469.         16        :CRC read error
  3470.         32        :Controller failure
  3471.         64        :Seek failure
  3472.         128       :Drive door is open
  3473.  
  3474.         CRITICAL SYSTEM ERROR CODES
  3475.         0         :Write Protect Error
  3476.         1         :Invalid Drive Specified
  3477.         2         :Drive Not Ready
  3478.         3         :Invalid Command
  3479.         4         :CRC Error
  3480.         5         :Bad Request Structure Length
  3481.         6         :Seek Error
  3482.         7         :Unknown Medium
  3483.         8         :Sector Not Found
  3484.         9         :Printer Out Of Paper
  3485.         10        :Write Error
  3486.         11        :Read Error
  3487.         12        :General Failure
  3488.  
  3489.  
  3490.                                    SHEZ USER MANUAL                  PAGE -72-
  3491.  
  3492.  
  3493.                               APPENDIX -2- SHEZ.INI FILE
  3494.  
  3495.         ;********************************************************************
  3496.         ;            SHEZ External viewer specification file.               *
  3497.         ;                 (SAMPLE FILE ONLY!!!!!)                           *
  3498.         ;                                                                   *
  3499.         ;            AFTER MODIFYING THIS FILE IT MUST                      *
  3500.         ;                    BE RENAME TO:                                  *
  3501.         ;                      SHEZ.INI                                     *
  3502.         ;            AND THEN COPIED TO A DIRECTORY THAT IS                 *
  3503.         ;                IN YOUR PATH STATEMENT.                            *
  3504.         ;                                                                   *
  3505.         ;                                                                   *
  3506.         ;FORMAT OF FILE:                                                    *
  3507.         ;  Each line must end with a Carriage return, Line feed.            *
  3508.         ;  Everything to the right of a semicolon treated as comments.      *
  3509.         ;                                                                   *
  3510.         ;  External viewer programs are specified as follows:               *
  3511.         ;     EXT = PROGRAM                                                 *
  3512.         ;  WHERE ext      is the file extension (DO NOT ENTER THE PERIOD!)  *
  3513.         ;        program  is the program to execute based on the selected   *
  3514.         ;                 file extension.                                   *
  3515.         ;                 $f indicates to SHEZ where to place the filename  *
  3516.         ;                    when executing the program.                    *
  3517.         ;EXAMPLE:                                                           *
  3518.         ; C=E:\UTY\QEDIT.EXE $F                                             *
  3519.         ;                                                                   *
  3520.         ; If the highlighted file in SHEZ is HELP.C then SHEZ will          *
  3521.         ; attempt to execute E:\UTY\QEDIT.EXE HELP.C                        *
  3522.         ;                                                                   *
  3523.         ;********************************************************************
  3524.         ;                     ADVANCED FEATURES                             *
  3525.         ;                                                                   *
  3526.         ;SPECIFYING A STARTUP DIRECTORY:                                    *
  3527.         ;  To tell SHEZ to change to a specific directory before running    *
  3528.         ;  the specified external file viewer use the vertical bar          *
  3529.         ;  character to separate the startup directory name from the        *
  3530.         ;  viewer command as shown below:                                   *
  3531.         ;                                                                   *
  3532.         ;GIF=E:\GIF\VPIC.EXE $F|G:\GIF\VPIC                                 *
  3533.         ;                                                                   *
  3534.         ;                                                                   *
  3535.         ;TELLING SHEZ TO PAUSE AFTER RUNNING THE VIEWER:                    *
  3536.         ;  SHEZ can pause before returning to itself allowing you to        *
  3537.         ;  view the contents of the screen after the external viewer        *
  3538.         ;  has been executed. This is accomplished by placing the          *
  3539.         ;  character immediately after the equal sign.                      *
  3540.         ;                                                                   *
  3541.         ;GIF=~E:\GIF\VPIC.EXE $F|G:\GIF\VPIC                                *
  3542.         ;                                                                   *
  3543.         ;                                                                   *
  3544.         ;********************************************************************
  3545.  
  3546.         [External Viewers]     ;THIS IS A REQUIRED ENTRY, TELLS SHEZ WHERE
  3547.                                ;THE EXTERNAL VIEWER DATA BEGINS
  3548.  
  3549.         generic=list.com $f    ;This is a generic viewer it will be executed
  3550.         if
  3551.  
  3552.  
  3553.  
  3554.                                    SHEZ USER MANUAL                  PAGE -73-
  3555.  
  3556.  
  3557.                                ;the highlighted file's extension is not
  3558.         specified,
  3559.                                ;or there is no file extension.
  3560.  
  3561.         H  =Q.EXE $f           ;Run q.exe for file with .h  extension
  3562.  
  3563.         DOC=E.EXE $f           ;Run e.exe for file with .doc extension
  3564.  
  3565.         WP =WPVIEW.EXE $F      ;Run wpview.exe for file with .wp extension
  3566.  
  3567.         C=E.EXE $F             ;Run e.exe for file with .c extension
  3568.  
  3569.  
  3570.                                    SHEZ USER MANUAL                  PAGE -74-
  3571.  
  3572.  
  3573.         ;********************************************************************
  3574.         ;                  SETTING UP PRINTERS                              *
  3575.         ;                                                                   *
  3576.         ;Up to three user defined printers can be defined.  Each printer    *
  3577.         ;definition requires it's own section name.  The section name       *
  3578.         ;is: [PRINTERx]  where x is 1,2, or 3.                              *
  3579.         ;Each printer section must have the following keyword defined:      *
  3580.         ;                                                                   *
  3581.         ;NAME                                                               *
  3582.         ;   user defined name of printer (25 characters or less)            *
  3583.         ;SETUP                                                              *
  3584.         ;   printer setup string                                            *
  3585.         ;CHARS-PER-LINE                                                     *
  3586.         ;   maximum number of characters per line                           *
  3587.         ;LINE-PER-PAGE                                                      *
  3588.         ;   maximum number of lines per page                                *
  3589.         ;ENDUP                                                              *
  3590.         ;   printer endup string (THIS IS OPTIONAL)                         *
  3591.         ;                                                                   *
  3592.         ;The printer SETUP and ENDUP strings can be up to 100 characters in *
  3593.         ;length.  The strings CAN NOT contain carriage return or line feed  *
  3594.         ;characters.  If these must be included in the string use the $     *
  3595.         ;character to enter their HEX equivalent.  I.E. a carriage return   *
  3596.         ;would be entered as $0d. The $ character indicates to SHEZ that the*
  3597.         ;next two characters are to be interpreted as HEX.  For example to  *
  3598.         ;enter the ASCII ESC character into the setup string use the        *
  3599.         ;following in your string: $1b.                                     *
  3600.         ;                                                                   *
  3601.         ;********************************************************************
  3602.  
  3603.  
  3604.         [Printer1]             ;HPLASER II-IV portrait compressed
  3605.         name=HP-port-compress
  3606.         setup=$1bE$1b(10U$1b(s16.6H$1b&l8D
  3607.         endup=$1bE
  3608.         chars-per-line=132
  3609.         lines-per-page=80
  3610.  
  3611.         [Printer2]             ;HPLASER II-IV landscape compressed
  3612.         name=HP-land-compress
  3613.         setup=$1bE$1b&l1O$1b(10U$1b(s16.6H$1b&l8D
  3614.         endup=$1bE
  3615.         chars-per-line=174
  3616.         lines-per-page=64
  3617.  
  3618.  
  3619.                                    SHEZ USER MANUAL                  PAGE -75-
  3620.  
  3621.  
  3622.         ;******************************************************************
  3623.         ;                         SETTING UP USER MENUS                   *
  3624.         ;                                                                 *
  3625.         ;Up to 20 user defined menu items may be defined in this section. *
  3626.         ;Each menu item MUST have a NAME parameter and a PROGRAM parameter*
  3627.         ;defined. The NAME parameter is the text that will appear drop    *
  3628.         ;down menu when the uSer menu option is selected.  The PROGRAM    *
  3629.         ;parameter defines what program or batch file will be executed    *
  3630.         ;when the item is selected. The rules for defining these two      *
  3631.         ;keyword parameters are as follows:                               *
  3632.         ;                                                                 *
  3633.         ;NAME                                                             *
  3634.         ;  User defined text of 25 characters or less. This text will     *
  3635.         ;  appear on the drop down menu.                                  *
  3636.         ;                                                                 *
  3637.         ;PROGRAM                                                          *
  3638.         ;  The program or batch file to execute when the selection is     *
  3639.         ;  chosen.                                                        *
  3640.         ;                                                                 *
  3641.         ;                                                                 *
  3642.         ;SPECIFYING A STARTUP DIRECTORY:                                  *
  3643.         ;   To tell SHEZ to change to a specific directory before running *
  3644.         ;   the specified user program use the vertical bar character to  *
  3645.         ;   separate the startup directory name from the program/batch    *
  3646.         ;   file to execute as shown below:                               *
  3647.         ;                                                                 *
  3648.         ;   PROGRAM=E:\GIF\VPIC.EXE|G:\GIF\VPIC                           *
  3649.         ;                                                                 *
  3650.         ;                                                                 *
  3651.         ;TELLING SHEZ TO PAUSE AFTER RUNNING A PROGRAM                    *
  3652.         ;   SHEZ can pause before returning to itself allowing you to view*
  3653.         ;   the contents of the screen after the program has been         *
  3654.         ;   executed. This is accomplished by placing the ~ character     *
  3655.         ;   immediately after the equal sign.                             *
  3656.         ;                                                                 *
  3657.         ;   PROGRAM=~E:\GIF\VPIC.EXE|G:\GIF\VPIC                          *
  3658.         ;                                                                 *
  3659.         ;PASSING A FILE TO A USER DEFINED PROGRAM                         *
  3660.         ;   By using the $f variable when defining the PROGRAM to execute *
  3661.         ;   you can pass the currently highlighted filename to an external*
  3662.         ;   program.  The $f tell SHEZ where to place the filename when   *
  3663.         ;   launching a user specified program.                           *
  3664.         ;                                                                 *
  3665.         ;   Two other variables can also be used, the $a and $m variable. *
  3666.         ;   These variables only have meaning if you launched a user menu *
  3667.         ;   item when selecting a member of a compressed file. The $a     *
  3668.         ;   variable will be replaced with the full compressed filename,  *
  3669.         ;   and the $m variable will be replaced with the name of the     *
  3670.         ;   selected member within the compressed file. For example: If   *
  3671.         ;   you are looking the contents of compressed file               *
  3672.         ;   D:\DOWN\SHEZXX.ZIP the highlighted item is SHEZ.EXE then the  *
  3673.         ;   $a variable will be replaced with D:\DOWN\SHEZXX.ZIP and the  *
  3674.         ;   $m variable will be replaced with SHEZ.EXE.                   *
  3675.         ;                                                                 *
  3676.         ;   The $f will also work when viewing the contents of a          *
  3677.         ;   compressed file. When viewing the contents of a compressed    *
  3678.         ;   file, if the $f characters are defined in the PROGRAM         *
  3679.  
  3680.  
  3681.  
  3682.                                    SHEZ USER MANUAL                  PAGE -76-
  3683.  
  3684.  
  3685.         ;   specification, the highlighted file is extracted to a work    *
  3686.         ;   directory and the user program is launched. When the user     *
  3687.         ;   program is exited, SHEZ will then check the extracted works   *
  3688.         ;   file's time and date stamp.  If the work file was updated SHEZ*
  3689.         ;   will REFRESH the copy of the file in the compressed file.     *
  3690.         ;                                                                 *
  3691.         ;******************************************************************
  3692.  
  3693.  
  3694.         [User-menu]
  3695.         Name=WordPerfect 5.1
  3696.         Program=E:\APPS\WP51\WP.EXE /nk|E:\APPS\WP51
  3697.  
  3698.         Name=WordPerfect 5.1 (pass file)
  3699.         Program=E:\APPS\WP51\WP.EXE $f /nk|E:\APPS\WP51
  3700.  
  3701.         Name=WordPerfect 6.0
  3702.         Program=U:\WP60\WP.EXE /nk|U:\WP60
  3703.  
  3704.  
  3705.                                    SHEZ USER MANUAL                  PAGE -77-
  3706.  
  3707.  
  3708.                                         INDEX
  3709.  
  3710.  
  3711.         (Minus key -) . . . . . . . . . . . . . . . . . . . . . . . . . 21, 33
  3712.  
  3713.  
  3714.         (Plus key +)  . . . . . . . . . . . . . . . . . . . . . . . . . 21, 33
  3715.  
  3716.  
  3717.         4DOS  . . . . . . . . . . . . . . . . . . . . . . 8, 22-24, 59, 60, 65
  3718.  
  3719.  
  3720.         4DOS AND NDOS SUPPORT . . . . . . . . . . . . . . . . . . . . . . . 59
  3721.  
  3722.  
  3723.         Activate volume label processing  . . . . . . . . . . . . . . . 22, 34
  3724.  
  3725.  
  3726.         ACTIVATING THE MENU SYSTEM  . . . . . . . . . . . . . . . . . . . .  9
  3727.  
  3728.  
  3729.         Add Update File Comments  . . . . . . . . . . . . . . . . . . . . . 31
  3730.  
  3731.  
  3732.         Add volume label to existing compressed file  . . . . . . . . . . . 34
  3733.  
  3734.  
  3735.         Add/Update all archive file comments  . . . . . . . . . . . . . . . 32
  3736.  
  3737.  
  3738.         Add/Update compressed file comments . . . . . . . . . . . . . . . . 20
  3739.  
  3740.  
  3741.         Add/Update highlighted archive file comments  . . . . . . . . . . . 32
  3742.  
  3743.  
  3744.         ALT-+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 66
  3745.  
  3746.  
  3747.         ALT-- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 66
  3748.  
  3749.  
  3750.         ALT-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 33, 66
  3751.  
  3752.  
  3753.         ALT-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 39
  3754.  
  3755.  
  3756.         ALT-5 . . . . . . . . . . . . . . . . . . . . . . . . . 21, 34, 41, 65
  3757.  
  3758.  
  3759.         ALT-6 . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 41, 42, 66
  3760.  
  3761.  
  3762.         ALT-7 . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 42, 65
  3763.  
  3764.  
  3765.         ALT-8 . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 42, 65
  3766.  
  3767.  
  3768.         ALT-9 . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 42, 66
  3769.  
  3770.  
  3771.         ALT-A . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 28, 65
  3772.  
  3773.  
  3774.         ALT-B . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 65
  3775.  
  3776.  
  3777.         ALT-C . . . . . . . . . . . . . . . . . . . . . . . . . 15, 20, 31, 65
  3778.  
  3779.  
  3780.         ALT-D . . . . . . . . . . . . . . . . . . . . . . . 22, 29, 60, 60, 65
  3781.  
  3782.  
  3783.         ALT-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 65
  3784.  
  3785.  
  3786.         ALT-F . . . . . . . . . . . . . . . . . . . . . . . . . 22, 28, 65, 66
  3787.  
  3788.  
  3789.         ALT-F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 30
  3790.  
  3791.  
  3792.         ALT-F2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 66
  3793.  
  3794.  
  3795.         ALT-F8  . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 36, 66
  3796.  
  3797.  
  3798.         ALT-G . . . . . . . . . . . . . . . . . . . . . . . . . 34, 41, 52, 66
  3799.  
  3800.  
  3801.         ALT-M . . . . . . . . . . . . . . . . . . . . . . . . . 24, 28, 65, 66
  3802.  
  3803.  
  3804.         ALT-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 65
  3805.  
  3806.  
  3807.         ALT-P . . . . . . . . . . . . . . . . 8, 16, 27-29, 39, 40, 47, 48, 65
  3808.  
  3809.  
  3810.         ALT-Q . . . . . . . . . . . . . . . . . . . . . 20, 22, 29, 35, 41, 65
  3811.  
  3812.  
  3813.         ALT-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 66
  3814.  
  3815.  
  3816.         ALT-S . . . . . . . . . . . . . . . . . . . . . . . . . 24, 29, 51, 66
  3817.  
  3818.  
  3819.         ALT-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 66
  3820.  
  3821.  
  3822.         ALT-U . . . . . . . . . . . . . . . . . . . . . . . . . 23, 28, 60, 66
  3823.  
  3824.  
  3825.         ALT-V . . . . . . . . . . . . . . . . . . . . . . . 18, 32, 45, 65, 66
  3826.  
  3827.  
  3828.         ALT-W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 66
  3829.  
  3830.  
  3831.         ALT-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 65
  3832.  
  3833.  
  3834.         ALT-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 53, 66
  3835.  
  3836.  
  3837.         ALT-Z . . . . . . . . . . . . . . . . . . . . . . . . . 20, 32, 50, 65
  3838.  
  3839.  
  3840.         Alternate file viewers  . . . . . . . . . . . . . . . . . . 21, 32, 49
  3841.  
  3842.  
  3843.         APPENDIX -2- SHEZ.INI FILE  . . . . . . . . . . . . . . . . . . . . 72
  3844.  
  3845.  
  3846.         ARJ ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . 70
  3847.  
  3848.  
  3849.         ASP HUB NETWORK . . . . . . . . . . . . . . . . . . . . . . . . . . 63
  3850.  
  3851.  
  3852.         BBS SYSOP NOTE: . . . . . . . . . . . . . . . . . . . . . . . . . . 50
  3853.  
  3854.  
  3855.         Browse any file . . . . . . . . . . . . . . . . . . . . . . 22, 34, 65
  3856.  
  3857.  
  3858.         CFG . . . . . . . . . . . . . . . . . . . . . . . . 19, 47, 48, 55, 66
  3859.  
  3860.  
  3861.         COMPATIBILITY ISSUES  . . . . . . . . . . . . . . . . . . . . . . . 55
  3862.  
  3863.  
  3864.         configuration . . . . . .  6-8, 19, 20, 27, 30, 32, 47, 48, 55, 58, 61
  3865.  
  3866.  
  3867.         CONFIGURING FOR VIRUS SCANNING  . . . . . . . . . . . . . . . . . . 55
  3868.  
  3869.  
  3870.         Convert all tagged files  . . . . . . . . . . . . . . . . . . . . . 18
  3871.  
  3872.  
  3873.         Convert highlighted file  . . . . . . . . . . . . . . . . . . . . . 18
  3874.  
  3875.  
  3876.         Convert highlighted file to a SFX file  . . . . . . . . . . . . . . 18
  3877.  
  3878.  
  3879.         Convert SFX file  . . . . . . . . . . . . . . . . . . . . . . . 32, 65
  3880.  
  3881.  
  3882.         Convert Tagged files to SFX files . . . . . . . . . . . . . . . . . 19
  3883.  
  3884.  
  3885.  
  3886.                                    SHEZ USER MANUAL                  PAGE -78-
  3887.  
  3888.  
  3889.         CONVERTING FILES  . . . . . . . . . . . . . . . . . . . . . . . . . 45
  3890.  
  3891.  
  3892.         Copy all TAGGED DOS files . . . . . . . . . . . . . . . . . . . . . 21
  3893.  
  3894.  
  3895.         Copy highlighted file . . . . . . . . . . . . . . . . . . . . . 19, 65
  3896.  
  3897.  
  3898.         CORPORATE SITE LICENSING FOR SHEZ . . . . . . . . . . . . . . . . . 67
  3899.  
  3900.  
  3901.         Create a new archive file . . . . . . . . . . . . . . . . . . . 16, 30
  3902.  
  3903.  
  3904.         CREATING NEW COMPRESSED FILES . . . . . . . . . . . . . 16, 30, 39, 44
  3905.  
  3906.  
  3907.         CRITICAL SYSTEM ERROR CODES . . . . . . . . . . . . . . . . . . . . 71
  3908.  
  3909.  
  3910.         CTL-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 65
  3911.  
  3912.  
  3913.         CTL-ENTER . . . . . . . . . . . . . . . . . . . . . 17, 21, 32, 49, 65
  3914.  
  3915.  
  3916.         CTL-F2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 65
  3917.  
  3918.  
  3919.         CTL-F3  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 65
  3920.  
  3921.  
  3922.         CTL-F4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
  3923.  
  3924.  
  3925.         CTL-F5  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
  3926.  
  3927.  
  3928.         CTL-F6  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 65
  3929.  
  3930.  
  3931.         CTL-Q . . . . . . . . . . . . . . . . . . . . . . . 22, 23, 34, 35, 42
  3932.  
  3933.  
  3934.         CTL-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 35
  3935.  
  3936.  
  3937.         CTL-SPACE . . . . . . . . . . . . . . . . . . . . . . . . . 20, 29, 66
  3938.  
  3939.  
  3940.         CTL-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 66
  3941.  
  3942.  
  3943.         CTL-U . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 29, 66
  3944.  
  3945.  
  3946.         CTL-V . . . . . . . . . . . . . . . . . . . . . . . 18, 32, 45, 46, 65
  3947.  
  3948.  
  3949.         CTL-X . . . . . . . . . . . . . . . . . . . . . . . 21, 22, 33, 35, 65
  3950.  
  3951.  
  3952.         CTL-Z . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 50, 65
  3953.  
  3954.  
  3955.         DEL KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 35
  3956.  
  3957.  
  3958.         Delete a DOS file or empty directory  . . . . . . . . . . . . . . . 17
  3959.  
  3960.  
  3961.         Delete all extracted files  . . . . . . . . . . . . . . . . . . 29, 65
  3962.  
  3963.  
  3964.         Delete all TAGGED DOS files . . . . . . . . . . . . . . . . . . . . 21
  3965.  
  3966.  
  3967.         Delete highlighted / tagged file(s) . . . . . . . . . . . . . . 22, 35
  3968.  
  3969.  
  3970.         DESQVIEW  . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 30, 56
  3971.  
  3972.  
  3973.         DESQVIEW COMPATIBILITY  . . . . . . . . . . . . . . . . . . . . . . 56
  3974.  
  3975.  
  3976.         Directory Assistance  . . . . . . . . . . . . . . . . . . . . . . .  5
  3977.  
  3978.  
  3979.         Display Info about archive file . . . . . . . . . . . . . . . . . . 27
  3980.  
  3981.  
  3982.         DOS directory Speed Search  . . . . . . . . . . . . . . . . . . . . 16
  3983.  
  3984.  
  3985.         Edit highlighted file . . . . . . . . . . . . . . . . . . . . . . . 21
  3986.  
  3987.  
  3988.         Edit the selected file  . . . . . . . . . . . . . . . . . . . . . . 30
  3989.  
  3990.  
  3991.         EDITING KEY DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . 15
  3992.  
  3993.  
  3994.         EMS . . . . . . . . . . . . . . . . . . . . . . . . . .  7, 47, 57, 58
  3995.  
  3996.  
  3997.         ENVIRONMENT VARIABLES . . . . . . . . . . . . . . . . . . . . . . . 47
  3998.  
  3999.  
  4000.         ERROR CODES WHEN FORMATTING A DISK  . . . . . . . . . . . . . . . . 71
  4001.  
  4002.  
  4003.         ESC . . . . . . . . . . . 7, 9, 12, 15, 18, 22, 33, 34, 41, 42, 50, 74
  4004.  
  4005.  
  4006.         Execute a file in an archive file . . . . . . . . . . . . . . . . . 29
  4007.  
  4008.  
  4009.         Execute highlighted program . . . . . . . . . . . . . . . . . . 23, 66
  4010.  
  4011.  
  4012.         Exit SHEZ . . . . . . . . . . . . . . .  20-22, 29, 33, 35, 37, 58, 65
  4013.  
  4014.  
  4015.         Exit SHEZ goto EXTRACT dir  . . . . . . . . . . . . . . . . . . 21, 33
  4016.  
  4017.  
  4018.         Extract all files from archive  . . . . . . . . . . . . . . . . . . 29
  4019.  
  4020.  
  4021.         Extract all tagged files  . . . . . . . . . . . . . . . . . . . 29, 65
  4022.  
  4023.  
  4024.         Extract location  . . . . . . . . . . . . . . . . .  8, 16, 29, 39, 40
  4025.  
  4026.  
  4027.         Extract only newer files  . . . . . . . . . . . . . . . . . . . . . 32
  4028.  
  4029.  
  4030.         Extracting a single file  . . . . . . . . . . . . . . . . . . . . . 27
  4031.  
  4032.  
  4033.         F1  . . . . . . . . . . . . . . . . . . . . . .  6, 16, 24, 30, 38, 65
  4034.  
  4035.  
  4036.         F10 . . . . . . . . . . . . . . . . . . . . 16, 28, 30, 33, 55, 60, 66
  4037.  
  4038.  
  4039.         F2  . . . . . . . . . . . . . . . . . . . . 17, 19, 21, 24, 30, 65, 66
  4040.  
  4041.  
  4042.         F3  . . . . . . . . . . . . . . . . . . . . . . . . 17, 19, 21, 65, 66
  4043.  
  4044.  
  4045.         F4  . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 21, 23, 65
  4046.  
  4047.  
  4048.         F5  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 66
  4049.  
  4050.  
  4051.         F6  . . . . . . . . . . . . . . . . . . . . . . . . 19, 21, 22, 65, 66
  4052.  
  4053.  
  4054.         F7  . . . . . . . . . . . . . . . . . . . . . . . . 16, 30, 39, 44, 65
  4055.  
  4056.  
  4057.         F8  . . . . . . . . . . . . . . . . . . . . 18, 19, 26, 30, 36, 65, 66
  4058.  
  4059.  
  4060.         F9  . . . . . . . . . . . . . .  9, 16, 17, 24, 28, 30, 33, 36, 44, 66
  4061.  
  4062.  
  4063.         FLOATING EXTRACT LOCATION . . . . . . . . . . . . . . . . . . . . . 39
  4064.  
  4065.  
  4066.  
  4067.                                    SHEZ USER MANUAL                  PAGE -79-
  4068.  
  4069.  
  4070.         FLOPPIES  . . . . . . . . . . . . . . . . . . . . . . . 23, 35, 40, 61
  4071.  
  4072.  
  4073.         FORMATTING  . . . . . . . . . . . . . . . . . . . . . . 23, 35, 40, 71
  4074.  
  4075.  
  4076.         FUNCTIONS WHEN VIEWING CONTENTS OF ARCHIVE FILE:  . . . . . . . . . 27
  4077.  
  4078.  
  4079.         HOT DIRECTORY . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 65
  4080.  
  4081.  
  4082.         Immediate Exit  . . . . . . . . . . . . . . . . . . . . . . . . 20, 29
  4083.  
  4084.  
  4085.         INTERNAL QUICK-VIEWER . . . . . . . . . . . . . . . . . . . . . . . 15
  4086.  
  4087.  
  4088.         KEYSTROKE RECORDING/PLAYBACK  . . . . . . . . . . . . .  8, 22, 34, 41
  4089.  
  4090.  
  4091.         label . . . . . . . . . . . . . . . . . . . . . 18, 22, 34, 39, 40, 44
  4092.  
  4093.  
  4094.         LEFT-MOUSE-BUTTON . . . . . . . . . . . . . . . . . . . . . . . . .  9
  4095.  
  4096.  
  4097.         LHARC ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . 70
  4098.  
  4099.  
  4100.         LICENSING SHEZ FOR PERSONAL USE . . . . . . . . . . . . . . . . . . 67
  4101.  
  4102.  
  4103.         LIMIT OF LIABILITY  . . . . . . . . . . . . . . . . . . . . . . . .  3
  4104.  
  4105.  
  4106.         Modify file attributes  . . . . . . . . . . . . . . . . . . . . 23, 65
  4107.  
  4108.  
  4109.         mouse . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15, 18, 41
  4110.  
  4111.  
  4112.         MOUSE SELECTABLE ITEMS IN A DIALOG BOX  . . . . . . . . . . . . . . 11
  4113.  
  4114.  
  4115.         MOUSE SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . .  9, 15
  4116.  
  4117.  
  4118.         Move all TAGGED DOS files . . . . . . . . . . . . . . . . . . . . . 21
  4119.  
  4120.  
  4121.         Move highlighted file . . . . . . . . . . . . . . . . . . . . . 19, 65
  4122.  
  4123.  
  4124.         multi-volume  . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
  4125.  
  4126.  
  4127.         NAVIGATING A SCROLLABLE DIALOG BOX USING THE MOUSE  . . . . . . . . 11
  4128.  
  4129.  
  4130.         NDOS  . . . . . . . . . . . . . . . . . . . . . . . 22, 23, 59, 60, 65
  4131.  
  4132.  
  4133.         NOTES ON CREATING SFX FILES . . . . . . . . . . . . . . . . . . . . 18
  4134.  
  4135.  
  4136.         PAK ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . 70
  4137.  
  4138.  
  4139.         PERFORMING A VIRUS SCAN . . . . . . . . . . . . . . . . . . . . . . 49
  4140.  
  4141.  
  4142.         PKUNPAK ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . 70
  4143.  
  4144.  
  4145.         PKUNZIP ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . 68
  4146.  
  4147.  
  4148.         PKZIP ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . 68
  4149.  
  4150.  
  4151.         PKZIPFIX  . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 66
  4152.  
  4153.  
  4154.         playback  . . . . . . . . . . . . . . . . . . 8, 22, 34, 38, 41-43, 65
  4155.  
  4156.  
  4157.         Print directory of compressed file  . . . . . . . . . . . . . . . . 38
  4158.  
  4159.  
  4160.         QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
  4161.  
  4162.  
  4163.         QUICKVIEW . . . . . . . . . . . . . . . . . . . . . . . 13, 15, 23, 35
  4164.  
  4165.  
  4166.         record  . . . . . . . . . . . . . . . . . . . . . . 20, 22, 34, 41, 42
  4167.  
  4168.  
  4169.         Rename all TAGGED DOS files . . . . . . . . . . . . . . . . . . . . 21
  4170.  
  4171.  
  4172.         Rename highlighted file . . . . . . . . . . . . . . . . . . . . 19, 35
  4173.  
  4174.  
  4175.         Right and Left cursor keys  . . . . . . . . . . . . . . . . . . 23, 33
  4176.  
  4177.  
  4178.         RIGHT-MOUSE-BUTTON  . . . . . . . . . . . . . . . . . . . . . . . .  9
  4179.  
  4180.  
  4181.         Run a program against all tagged files  . . . . . . . . . . . . . . 34
  4182.  
  4183.  
  4184.         Scan file(s) for a string . . . . . . . . . . . . . . . . . . . . . 34
  4185.  
  4186.  
  4187.         Select a new archive file . . . . . . . . . . . . . . . . . . . 17, 30
  4188.  
  4189.  
  4190.         Set ARJ Compression Method  . . . . . . . . . . . . . . . . . . . . 37
  4191.  
  4192.  
  4193.         Set Path/Directory option . . . . . . . . . . . . . . . . . . . . . 31
  4194.  
  4195.  
  4196.         Set ZIP Compression Method  . . . . . . . . . . . . . . . . . . . . 37
  4197.  
  4198.  
  4199.         SETTING ALTERNATE FILE VIEWERS  . . . . . . . . . . . . . . . . . . 49
  4200.  
  4201.  
  4202.         SETTING UP USED DEFINED MENU ENTRIES  . . . . . . . . . . . . . . . 49
  4203.  
  4204.  
  4205.         SETTING USER DEFINED PRINTER  . . . . . . . . . . . . . . . . . . . 49
  4206.  
  4207.  
  4208.         SFT-F2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
  4209.  
  4210.  
  4211.         SFT-F3  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 65
  4212.  
  4213.  
  4214.         SFT-F4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 65
  4215.  
  4216.  
  4217.         SFT-F6  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 66
  4218.  
  4219.  
  4220.         SFT-F8  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 65
  4221.  
  4222.  
  4223.         sgrep . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 52, 53
  4224.  
  4225.  
  4226.         SHEZEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
  4227.  
  4228.  
  4229.         SHEZUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
  4230.  
  4231.  
  4232.         SHEZXMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
  4233.  
  4234.  
  4235.         SHIFT-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
  4236.  
  4237.  
  4238.         Show help screen  . . . . . . . . . . . . . . . . . . . . . . . 16, 30
  4239.  
  4240.  
  4241.         Show tagged file count  . . . . . . . . . . . . . . . . . . . . . . 33
  4242.  
  4243.  
  4244.         Smart copy  . . . . . . . . . . . . . . . . . . . . . . . . 24, 25, 66
  4245.  
  4246.  
  4247.  
  4248.                                    SHEZ USER MANUAL                  PAGE -80-
  4249.  
  4250.  
  4251.         Smart extract . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
  4252.  
  4253.  
  4254.         Sort the archive file list  . . . . . . . . . . . . . . . . . . . . 30
  4255.  
  4256.  
  4257.         Sort the file list  . . . . . . . . . . . . . . . . . . . . . . . . 17
  4258.  
  4259.  
  4260.         spanned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
  4261.  
  4262.  
  4263.         Specify an archive file mask  . . . . . . . . . . . . . . . . . . . 31
  4264.  
  4265.  
  4266.         SPEECH FRIENDLY INTERFACE . . . . . . . . . . . . . . . . . . . . . 59
  4267.  
  4268.  
  4269.         Speed search  . . . . . . . . . . . . . . . . . . . . . . . 16, 29, 66
  4270.  
  4271.  
  4272.         Supply Password for File  . . . . . . . . . . . . . . . . . . . . . 31
  4273.  
  4274.  
  4275.         SUPPORT FOR SELF EXTRACTING FILES . . . . . . . . . . . . . . . . . 46
  4276.  
  4277.  
  4278.         SUPPORT FOR SHEZ AND QUESTIONS  . . . . . . . . . . . . . . . . . . 64
  4279.  
  4280.  
  4281.         SUPPORT FOR UC2 COMPRESSED FILES  . . . . . . . . . . . . . . . . . 61
  4282.  
  4283.  
  4284.         TAB KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34
  4285.  
  4286.  
  4287.         Tag All Files . . . . . . . . . . . . . . . . . . . . . . . 20, 29, 66
  4288.  
  4289.  
  4290.         Tag highlighted file  . . . . . . . . . . . . . . . . . . . 21, 33, 66
  4291.  
  4292.  
  4293.         Temporary exit to DOS . . . . . . . . . . . . . . . . . . . 16, 30, 66
  4294.  
  4295.  
  4296.         Test COM,EXE, and OVL files in a compressed file for viruses  . . . 32
  4297.  
  4298.  
  4299.         Test tagged compressed file(s) for viruses  . . . . . . . . . . . . 20
  4300.  
  4301.  
  4302.         Testing archive integrity . . . . . . . . . . . . . . . . . . . . . 27
  4303.  
  4304.  
  4305.         Toggle authenticity mode in PKZIP . . . . . . . . . . . . . . . 21, 33
  4306.  
  4307.  
  4308.         Toggle overwrite mode . . . . . . . . . . . . . . . . . . . . . . . 31
  4309.  
  4310.  
  4311.         Toggle the Tag status . . . . . . . . . . . . . . . . . . . . . 19, 29
  4312.  
  4313.  
  4314.         Ultravision . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
  4315.  
  4316.  
  4317.         Untag all Files . . . . . . . . . . . . . . . . . . . . . . 20, 29, 66
  4318.  
  4319.  
  4320.         Untag highlighted file  . . . . . . . . . . . . . . . . . . 21, 33, 66
  4321.  
  4322.  
  4323.         USING 4DOS INTERNAL LIST COMMAND  . . . . . . . . . . . . . . . . . 60
  4324.  
  4325.  
  4326.         USING EMS/XMS MEMORY IN SHEZ  . . . . . . . . . . . . . . . . . . . 57
  4327.  
  4328.  
  4329.         USING THE MOUSE WITH VERN BUERG'S LIST PROGRAM  . . . . . . . . . . 15
  4330.  
  4331.  
  4332.         UUDECODE  . . . . . . . . . . . . . . . . . . . . . . . . . 26, 36, 66
  4333.  
  4334.  
  4335.         UUENCODE  . . . . . . . . . . . . . . . . . . . . . . . . . 26, 36, 66
  4336.  
  4337.  
  4338.         UUENCODE and UUDECODE . . . . . . . . . . . . . . . . . . . . . . . 37
  4339.  
  4340.  
  4341.         View a file . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 17
  4342.  
  4343.  
  4344.         View file and archive comment records . . . . . . . . . . . . . . . 32
  4345.  
  4346.  
  4347.         Viewing a file  . . . . . . . . . . . . . . . . . . . . . . . . 15, 27
  4348.  
  4349.  
  4350.         virus . . . . . . . . . . . . . . 5, 20, 24, 32, 37, 47, 49-51, 55, 66
  4351.  
  4352.  
  4353.         VIRUS CHECKING SELECTED FILES . . . . . . . . . . . . . . . . . . . 50
  4354.  
  4355.  
  4356.         Virus scan ALL files  . . . . . . . . . . . . . . . . . . . . . . . 37
  4357.  
  4358.  
  4359.         Virus scan ONLY EXECUTABLE files. . . . . . . . . . . . . . . . . . 37
  4360.  
  4361.  
  4362.         VIRUS SCANNING A DIRECTORY  . . . . . . . . . . . . . . . . . . . . 50
  4363.  
  4364.  
  4365.         viruses . . . . . . . . . . . . . . . . 20, 24, 32, 37, 49, 50, 55, 65
  4366.  
  4367.  
  4368.         volume  . . . . . . . . . . . . . . . . . . 18, 22, 34, 39, 40, 44, 70
  4369.  
  4370.  
  4371.         VOLUME LABEL SUPPORT  . . . . . . . . . . . . . . . . . . . 22, 34, 39
  4372.  
  4373.  
  4374.         WHERE TO FIND THE MOST CURRENT VERSION  . . . . . . . . . . . . . . 62
  4375.  
  4376.  
  4377.         WINDOWS AND OS/2 COMPATIBILITY  . . . . . . . . . . . . . . . . . . 56
  4378.  
  4379.  
  4380.         Write out configuration information . . . . . . . . . . . . . . . . 19
  4381.  
  4382.  
  4383.         XMS . . . . . . . . . . . . . . . . . . . . . . . . . .  7, 47, 57, 58
  4384.  
  4385.  
  4386.         ZOOMING DIRECTORY WINDOW WITH MOUSE . . . . . . . . . . . . . . . . 10
  4387.  
  4388.