1 41100JUQ0001 \n Message number %d cannot be displayed. \n OK: Check the message number.
3 31100JUQ0003 \n No file name has been specified. \n OK: Specify a file name.
4 31100JUQ0004 \n File %s was not found. \n OK: Specify the correct file name.
5 31100JUQ0005 \n Disk space is insufficient. \n OK: Increase the disk space.
6 31100JUQ0006 \n %s is an invalid file name. \n OK: Specify the correct file name.
7 31100JUQ0007 \n '%s' is an invalid level. \n OK: Specify a level from 1 to 32767.
10 31100JUQ0010 \n No pathname has been specified. \n OK: Specify a pathname.
11 31100JUQ0011 \n '%s' is an invalid record length. \n OK: Specify a record length from 1 to 32760.
12 31100JUQ0012 \n '%s' is an invalid code system. \n OK: Specify the correct code system.
13 31100JUQ0013 \n '%s' is an invalid block length. \n OK: Specify a block length from 1 to 32760.
14 31100JUQ0014 \n '%s' is an invalid number of directory blocks. \n OK: Specify the number of directory blocks from 1 to 32767.
15 31100JUQ0015 \n '%s' is an invalid volume. \n OK: Specify the correct volume.
16 31100JUQ0016 \n '%s' is an invalid amount of space. \n OK: Specify the amount of space in a range from 1 to 99999999.
17 31100JUQ0017 \n No code system has been specified. \n OK: Specify the code system.
28 31100JUQ0028 \n There is an invalid file password. \n OK: Specify the correct file password.
31 41100JUQ0031 \n This program cannot be executed because there is insufficient memory. \n OK: Close unnecessary programs, then run this program.
33 41100JUQ0033 \n A system error occurred. \nCode = '%d,%d'\n OK: Stop the processing and contact our technical representative.
34 41100JUQ0034 \n A system error occurred. \nCode = '%d,%d,%d'\n OK: Stop the processing and contact our system engineer.
35 31100JUQ0035 \n The drive '%s' has not been installed.
36 31100JUQ0036 \n The date of last modification '%s' is invalid. \n OK: Specify the correct date of last modification.
37 31100JUQ0037 \n '%s' is an invalid size. \n OK: Specify the correct size.
38 31100JUQ0038 \n No more than one file can be specified. \n OK: Specify only one file.
39 31100JUQ0039 \n '%s' already exists. \n OK: Specify the correct directory and file names.
40 32100JUQ0040 \n The file '%s' was not found. \nDo you want to continue processing? \n OK: Processing will be continued. \n Cancel: Processing will be canceled.
41 31100JUQ0041 \n The specified line number '%s' is invalid. \n OK: Specify the correct line number.
42 31100JUQ0042 \n The end value is invalid. A value less than the start value cannot be specified. \n OK: Specify the correct value.
44 31100JUQ0044 \n The file '%s' cannot be written to. \n OK: Specify the correct file name. Alternatively, change the file status.
45 31100JUQ0045 \n The file '%s' cannot be accessed. \n OK: Specify the correct file name. Alternatively, change the file status.
46 31100JUQ0046 \n A resource necessary for the operation of this program was not reserved. \n OK: Close unnecessary applications, then run this program.
47 31100JUQ0047 \n The date of last modification is invalid. \n OK: Specify the correct date of last modification.
49 31100JUQ0049 \n The specified password is invalid. \n OK: Specify the correct password.
54 31100JUQ0054 \n The version of Windows is invalid. \n OK: Processing will be canceled.
55 31100JUQ0055 \n The output class is invalid. \n OK: Specify the correct output class.
56 31100JUQ0056 \n '%s' is an invalid member name. \n OK: Specify the correct member name.
57 31100JUQ0057 \n '%s' is an invalid library name. \n OK: Specify the correct library name.
58 31100JUQ0058 \n Member password is invalid. \n OK: Specify the correct member password.
59 32100JUQ0059 \n The directory '%s' cannot be specified. \n OK: Processing will be continued. \n Cancel: Processing will be canceled.
60 31100JUQ0060 \n No volume has been specified. \n OK: Specify a volume.
63 31100JUQ0063 \n The directory '%s' cannot be created. \n OK: Processing will be discontinued.
66 31100JUQ0066 \n '%s' is an invalid data type. \n OK: Specify the correct data type.
67 31100JUQ0067 \n '%s' is an invalid owner. \n OK: Specify the correct owner.
68 31100JUQ0068 \n '%s' is an invalid module identifier. \n OK: Specify the correct module identifier.
69 31100JUQ0069 \n '%s' is a surplus keyword. \n OK: Specify the correct key word.
70 31100JUQ0070 \n '%s' is an invalid operand value. \n OK: Specify the correct operand value.
71 31100JUQ0071 \n No operand value has been specified for the keyword '%s'. \n OK: Specify an operand value.
72 31100JUQ0072 \n '%s' is an invalid %s. \n OK: Specify the correct value.
73 31100JUQ0073 \n '%s' is an invalid %s. \n OK: Specify %s in the range %ld to %ld.
74 31100JUQ0074 \n No directory name has been specified. \n OK: Specify a directory name.
75 31100JUQ0075 \n No member password has been specified. \n OK: Specify a member password.
76 31100JUQ0076 \n No file password has been specified. \n OK: Specify a file password.
77 31100JUQ0077 \n No output class has been specified. \n OK: Specify an output class.
78 31100JUQ0078 \n No group name has been specified. \n OK: Specify a group name.
79 31100JUQ0079 \n No password has been specified. \n OK: Specify a password.
80 31100JUQ0080 \n No data type has been specified. \n OK: Specify a data type.
81 31100JUQ0081 \n No owner has been specified. \n OK: Specify an owner.
82 31100JUQ0082 \n No module identifier has been specified. \n OK: Specify a module identifier.
83 31100JUQ0083 \n '%s' is an invalid directory name. \n OK: Specify the correct directory name.
84 31100JUQ0084 \n '%s' is an invalid member name. \n OK: Specify the correct member name.
85 31100JUQ0085 \n No member name has been specified. \n OK: Specify a member name.
86 31100JUQ0086 \n '%s' is an invalid group name. \n OK: Specify the correct group name.
87 31100JUQ0087 \n %s has not been specified. \n OK: Specify %s.
88 31100JUQ0088 \n %s is an invalid file or member name. \n OK: Specify the correct file or member name.
89 31100JUQ0089 \n A file or member name has not been specified. \n OK: Specify a file or member name.
90 31100JUQ0090 \n '%s' is a surplus operand. \n OK: Specify the correct operand.
91 31100JUQ0091 \n The program cannot be started because the maximum allowable number of users has been reached. \n OK: Processing will be canceled.
92 31100JUQ0092 \n The product storage directory name for the section name [PFV] of the PFV.INI initialization file is incorrect. \n OK: Processing will be canceled.
95 31100JUQ0095 \n No member name has been specified. \n OK: Specify a member name.
96 31100JUQ0096 \n PowerFRAMEVIEW cannot run in standard mode. \n OK: Processing will be canceled.
98 00000JUQ0098 \n Used in the load function (juqdg020)
99 00000JUQ0099 \n Used in the load function (juqdg020)
100 11100JUQ0100 \n Processing has ended.
102 31100JUQ0102 \n Host cooperation is in use. \n OK: Run this process after the current processing has ended.
103 31100JUQ0103 \n The directory '%s' was not found. \n OK: Close the Manipulate list window, then display it again.
107 32100JUQ0107 \n No file satisfies the specified condition. \n OK: Set the grouping condition again. \n Cancel: Grouping processing will be canceled.
109 34100JUQ0109 \n Do you want to have the selected file moved to %s? \n Yes: The selected file will be moved to the destination. \n No: The file will not be moved.
110 34100JUQ0110 \n Do you want to have the selected file copied to %s? \n Yes: The selected file will be copied to the specified destination. \n No: The file will not be copied.
115 32100JUQ0115 \n Too many files were selected. \n OK: As many files as possible will be processed. \n Cancel: Processing will be canceled.
119 31100JUQ0119 \n Only one '%s' application can be executed at a time. \n OK: Processing will be canceled.
120 31100JUQ0120 \n The application '%s' has been written for an earlier version of Windows. \n OK: Re-generate the application if necessary.
121 31100JUQ0121 \n '%s' is an OS/2 application.
122 31100JUQ0122 \n The path %s was not found. \n OK: Processing will be canceled.
123 31100JUQ0123 \n The application %s was not found. \n OK: Processing will be canceled.
124 31100JUQ0124 \n The definition of the key name %s of the PFV.INI initialization file is incorrect. \n OK: Processing will be canceled.
125 31100JUQ0125 \n The application %s cannot be started. \n OK: Processing will be canceled.
126 31100JUQ0126 \n The length limit of the command line was exceeded. \n OK: Specify the file name by a relative pathname. Alternatively, make the option short.
127 31100JUQ0127 \n The path %s was not found. \n OK: Specify the correct pathname.
128 31100JUQ0128 \n The application %s was not found. \n OK: Specify the correct application name.
129 31100JUQ0129 \n The application %s cannot be started. \n OK: Specify the correct application name.
132 34100JUQ0132 \n Do you want to have the selected file deleted? \n Yes: The file will be deleted. \n No: The file will not be deleted.
135 31100JUQ0135 \n Too many files have been opened. \n OK: Too many files have been opened.
136 31100JUQ0136 \n The program does not have the permission to access the file '%s'. \n OK: Ask the network manager to assign the permission, if necessary.
137 31100JUQ0137 \n The program does not have the permission to access the directory '%s'. \n OK: Ask the network manager to assign the permission, if necessary.
138 31100JUQ0138 \n The program does not have the permission to change the status of the file '%s'. \n OK: Ask the network manager to assign the permission, if necessary.
139 31100JUQ0139 \n The program does not have the permission to change the status of the directory '%s'. \n OK: Ask the network manager to assign the permission, if necessary.
140 31100JUQ0140 \n The program cannot access a work file because it does not have the permission to access the directory '%s. \n OK: Ask the network manager to assign the permission, if necessary.
141 31100JUQ0141 \n There is an error in the definition of the Development Manager customize menu. Section = '%s', entry = '%s' \n OK: Stop the process and contact our technical representative.
142 31100JUQ0142 \n Host interaction is impossible because of a PowerGEM level mismatch.
143 31100JUQ0143 \n Business server interaction is impossible because the BS*NET/BASE has not been installed.
150 31100JUQ0150 \n In '%s', the maximum length of the file or directory name was exceeded. \n OK: Specify the correct file or directory name. \n For business server interaction, the maximum allowable length is 127 bytes.
151 31100JUQ0151 \n The directory '%s' was not found. \n OK: Specify the correct directory name.
152 31100JUQ0152 \n The member '%s' was not found. \n OK: Specify the correct member name.
153 31100JUQ0153 \n The library '%s' was not found. \n OK: Specify the correct library name.
154 31100JUQ0154 \n No file was found in the directory '%s'. \n OK: Specify the correct directory name.
155 31100JUQ0155 \n No member was found in the library '%s'. \n OK: Specify the correct library name.
156 31100JUQ0156 \n The read password is invalid. \n OK: Specify the correct read password.
157 31100JUQ0157 \n No read password has been specified. \n OK: Specify a read password.
158 31100JUQ0158 \n The write password is invalid. \n OK: Specify the correct write password.
159 31100JUQ0159 \n No write password has been specified. \n OK: Specify a write password.
160 31100JUQ0160 \n The drive '%s' is not ready. \n OK: Specify the correct drive.
161 34100JUQ0161 \n An attempt to expand the OASYS document '%s' failed. Options = %s. Do you want to continue? \n Yes: Processing will be continued. \n No: Processing will be canceled.
162 31100JUQ0162 \n An error occurred in accessing the file '%s'. \n OK: Specify the correct file name.
163 34200JUQ0163 \n Do you want to have the document '%s' deleted? \nPlease confirm.\n Yes: The document will be deleted. \n No: The document will not be deleted.
164 31100JUQ0164 \n The file '%s' has been specified as read-only. \n OK: Cancel read-only specification and run the program.
165 31100JUQ0165 \n The definition of title acquisition information on extended '%s' is mistaken. \n OK: The title acquisition processing of extended '%s' is discontinued.
166 31100JUQ0166 \n The library in work space '%s' is not found.
167 31100JUQ0167 \n Failed in the opening of library '%s' addition information file.
168 31100JUQ0168 \n Failed in the closing of library '%s' addition information file.
169 31100JUQ0169 \n There is no access right in library '%s' addition information file.
170 31100JUQ0170 \n Failed in the opening of work space '%s' control file.
171 31100JUQ0171 \n There is no access right in work space '%s' control file.
172 31100JUQ0172 \n Library '%s' control file is destroyed.
173 31100JUQ0173 \n Work space '%s' control file is destroyed.
174 34100JUQ0174 \n Do you want to delete the selected file? \n OK: The file will be deleted. \n No: Processing will be canceled.
175 33100JUQ0175 \n %s cannot be accessed. \n The device is not ready.
176 31100JUQ0176 \n The library '%s' was not found.
177 31100JUQ0177 \n The management file of the library '%s' has been deleted.
178 31100JUQ0178 \n The management file of the work space '%s' has been deleted.
179 31100JUQ0179 \n You do not have the right to access the work space management file, library management file, or GEM member.
180 41100JUQ0180 \n A system error has occurred. \nCode = '%s,%ld' \n OK: Terminate the processing and contact Fujitsu Ltd.
181 41100JUQ0181 \n A system error has occurred. \nCode = '%s,%s' \n OK: Terminate the processing and contact a Fujitsu systems engineer.
182 31100JUQ0182 \n The full pathname of '%s' is too long to process.
183 31100JUQ0183 \n The network path '%s' was not found.
184 31100JUQ0184 \n The disk in the drive %s is not formatted.
185 34100JUQ0185 \n A partitioned file member cannot be created from '%s'. \n OK: Processing will be continued. \n No: Processing will be canceled.
186 31100JUQ0186 \n The disk '%s' is write-protected. \n OK: Make the disk write-enable or replace it with another one.
187 31100JUQ0187 \n Data cannot be written to '%s' because it is a CD-ROM.
188 31100JUQ0188 \n The printer '%s' cannot be used. Memory is insufficient or the printer is not connected. \n OK: Processing will be canceled.
189 31100JUQ0189 \n Data cannot be printed because the printer is not set. \n OK: Processing will be canceled.
190 31100JUQ0190 \n The drive %s cannot be accessed.
191 31100JUQ0191 \n Business server cooperation is in use or cannot be executed. \n OK: Wait until the current processing ends and retry.
192 31100JUQ0192 \n The file '%s' is write-protected or is either a system or hidden file. \n OK: Change the file attribute and retry.
193 31100JUQ0193 \n The folder '%s' cannot be specified. \n OK: Specify the correct file name.
194 31100JUQ0194 \n No directory name is specified. \n OK: Specify a directory name.
195 31100JUQ0195 \n The directory name '%s' is not correct. \n OK: Specify the correct directory name.
202 31100JUQ0202 \n The specified copy/move destination is invalid. \n OK: Specify the correct directory or file name.
203 31100JUQ0203 \n The line number and its length are not specified at the same time. \n OK: Specify them at the same time.
206 31100JUQ0206 \n The specified line number's length is invalid. \n OK: Set the line number's length to 6 or 8.
207 31100JUQ0207 \n The specified copy/move destination is invalid. \n OK: Specify the correct library name.
208 31100JUQ0208 \n Sequential file or partitioned file on things except file were specified. \n OK: Specify Sequential file or partitioned file.
209 31100JUQ0209 \n The mistake is found in specification copy/move ahead. \n OK: Specify the correct file name.
253 31100JUQ0253 \n No primary space has been specified. \n OK: Specify a primary space.
255 31100JUQ0255 \n No library name has been specified. \n OK: Specify a library name.
256 31100JUQ0256 \n No record length has been specified. \n OK: Specify a record length.
257 31100JUQ0257 \n No block length has been specified. \n OK: Specify a block length.
258 31100JUQ0258 \n The record length is larger than the block length. \n OK: Specify the correct record and block lengths.
259 31100JUQ0259 \n The library name cannot be specified at the same time with the number of directory blocks. \n OK: Specify either the library name or the number of directory blocks.
260 31100JUQ0260 \n The block length is not an integer multiple of the record length. \n OK: Specify the correct record and block lengths.
301 34200JUQ0301 \n Do you want to have the file %s deleted? \nConfirm please. \n Yes: The file will be deleted. \n No: File deletion will be canceled.
304 32100JUQ0304 \n The file '%s' is a read-only, system, or hidden file. \nChange the status, then run this processing. \n OK: Processing will be continued. \n Cancel: Processing will be discontinued.
305 34200JUQ0305 \n Do you want to have the directory '%s' and all files in it deleted? \n Please confirm. \n Yes: The files will be deleted. \n No: File deletion will be canceled.
350 31100JUQ0350 \n The RM server environment definition file does not contain information about the extension '%s'. \n OK: Processing will be canceled.
351 31100JUQ0351 \n An attempt to obtain the RM server information failed. \n OK: Processing will be canceled.
352 31100JUQ0352 \n The program cannot access the RM server environment definition file, because it does not have the permission to access the product storage directory '%s'. \n OK: Ask the network manager to assign the permission, if necessary.
501 34100JUQ0501 \n The extension cannot be changed. \nDo you want to have it changed to '%s'? \n Yes: Change will be made. \n No: There is no change made.
552 34200JUQ0552 \n Do you want to have the file %s reorganized? \nPlease confirm. \n Yes: The file will be reorganized.\n No: File reorganization will be canceled.
605 31100JUQ0605 \n The file %s is being used by another user. \n OK: After the user finishes with this file, run your program.
610 31100JUQ0610 \n File %s has already existed. \n OK: Specify the correct file name.
642 31100JUQ0642 \n A file alias cannot be processed. \n OK: Specify the correct file name.
671 31100JUQ0671 \n The host is not established. \n OK: Please establish the host.
672 31100JUQ0672 \n The specified copy/move destination is invalid. \n OK: Specify the correct directory or file name.
801 31100JUQ0801 \n The specified move destination is invalid. \n OK: Specify the correct directory or file name.
802 34200JUQ0802 \n The file '%s' was copied. \nDo you want to delete the original file? \n Yes: The file will be deleted. \n No: The file will not be deleted.
851 31100JUQ0851 \n The typeface '%s' does not exist. \n OK: Specify the correct typeface.
852 31100JUQ0852 \n The printer driver has not been selected. \n OK: Processing will be canceled.
901 35100JUQ0901 \n An unconvertible code was detected in the file '%s'. \nPlease confirm.\n Yes: It will be converted to '_'. \n No: Processing will be continued. \n Cancel: Processing will be canceled.
902 31100JUQ0902 \n Code conversion cannot be performed on the file '%s'.\n OK: Check the file.
904 34200JUQ0904 \n Do you want to convert the same file? \nPlease confirm.\n Yes: File conversion will be carried out.\n No: File conversion will be canceled.
954 31100JUQ0954 \n The specified tool class name '%s' is invalid.\n OK: Specify the correct tool class name.
955 31100JUQ0955 \n '%s' is an invalid file name for processing.\n OK: Specify the correct file name.
956 31100JUQ0956 \n '%s' is an invalid file name for processing.\n OK: Specify a pathname.
957 32100JUQ0957 \n No file name is specified when a file name is valid as a start option. \n OK: Processing will be continued. \n Cancel: Processing will be canceled.
