home *** CD-ROM | disk | FTP | other *** search
- From greg Fri May 19 12:00:26 1989
- Return-Path: <greg>
- Received: by hobbes (3.2/SMI-3.2)
- id AA13764; Fri, 19 May 89 12:00:23 PDT
- Date: Fri, 19 May 89 12:00:23 PDT
- From: greg (Gregory J. Ward)
- Message-Id: <8905191900.AA13764@hobbes>
- To: ph@miro.berkeley.edu
- Subject: slides
- Status: R
-
- Paul,
-
- I told the operator (Duncan Conner) that we would send him the frames
- before 1pm, and as long as there aren't too many, he would finish them
- before he left at 2pm. Since I have a meeting to go to at 2, perhaps
- it would be more expedient for you to pick up the film and take it
- to be developed. It will be in the output area of Bldg. 50B, which is
- right across from the LBL shuttle stop. You go up the stairs (it is
- the further wing of the big ugly brown building) and through an underground
- parking lot to a doorway on the left surrounded by two yellow metal
- pylons. Just go down the corridor and through a door to the stairs and
- go up one flight (past the mezzanine) to the first floor and turn right,
- through the double doors and the I/O boxes are on the left. It will
- be in a metal can under Ward.
-
- The film is bulk E6 and can be processed by ZIBA for .75/ft. I know
- of no other developers in this are who will do it in house, and actually
- it is a good price (as long as you tell them not to mount the slides!).
- ZIBA is located in Shattuck square near the intersection of Shattuck
- and University. I guess you will probably want them to make prints
- directly to save time, and this may not be very cheap.
-
- Let me know if you have any questions.
-
- -Greg
-
-