home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Professional
/
OS2PRO194.ISO
/
os2
/
driver
/
scsi
/
ultrasta
/
readme.os2
< prev
next >
Wrap
Text File
|
1993-02-17
|
1KB
|
35 lines
This is the ADD driver for IBM OS/2 2.0.
Following are the procedures to install ULTRA24.ADD.
1. Follow IBM OS/2 2.0's installtion instructions to install the operating
system and reboot.
2. Insert the diskette containing the UltraStor ULTRA24.ADD device driver
into a floppy drive and copy ULTRA24.ADD to the \OS2 directory.
e.g. COPY A:ULTRA24.ADD C:\OS2
3. Use an editor to modify CONFIG.SYS by adding BASEDEV=ULTRA24.ADD line.
4. Save the modified CONFIG.SYS.
5. Reboot the system for new configuration to take effect.
Note: There are switches available to ULTRA24.ADD IBM OS/2 Device Driver.
1. /A:hanum - adapter identification
2. /!DM:d1, d2, ... - Disable DASD Manager support for devices d1, d2, ...
3. /!SM:d1, d2, ... - Disable SCSI Manager support for devcies d1, d2, ...
4. /ET - Allows the driver to scan for all LUNs.
Example: When a WORM device of SCSI ID 6 is connected to the first ULTRA 24F
in the system and COREL SCSI software is used to access the WORM, add the
following statement with switches to CONFIG.SYS.
BASEDEV=ULTRA24.ADD /A:0 /!DM:6
Example: When a target device with multiple LUNs such as a CDROM changer is
attached to ULTRA 24F, add the following statement with switch to CONFIG.SYS.
BASEDEV=ULTDRA24.ADD /ET