DIALOGUPGRADE_ASKSERIAL=Setup was unable to verify your eligibility for the NetObjects Fusion 5.0 Upgrade Edition. Please enter a valid 3.0.x or 4.0.x serial number below.
DIALOGSHOWSDWELCOME_MSG_TRIAL=Here are a few things to check before you install NetObjects Fusion 5.0 Trial.
TITLE_MAIN=NetObjects Fusion 5.0 Trial
FILENAME_LICENSE_TXT=License.txt
DIALOGUPGRADE_BADSERIAL=Setup was unable to verify your serial number. Please try entering it again.\n\nIf you are unable to enter your serial number successfully, please contact\nNetObjects Customer Service at: 888-449-6400 or 512-434-1523.
DIALOGSHOWSDLICENSE_MSG=Please read the following license agreement. Use the scroll bar to view the complete agreement.
OLDSTYLECHECK_ASK_YESNO_MSG=If you are using a previous version of NetObjects Fusion,\nwe highly recommend that you copy your current SiteStyles\nto your 5.0 Styles folder.\n\nWould you like Setup to do this now?
IE2_MSG=Internet explorer version 3.0 or higher is not present on your system. NetObjects Fusion requires IE3 or higher to run. Netobjects strongly recommends you to install Internet Explorer 5.0. \n
ERR_MSG_VGARESOLUTION=This program requires VGA or better resolution.
DAO_COPY=Copying DAO Files....
README_SHORTCUT=NetObjects Fusion 5.0 Readme
PRODUCT_TRIAL_NAME=NetObjects Fusion 5.0 Trial
ASK_YESNO_COMPONENTS_TITLE=Warning!
COMPONENTS_COMPONENTS_DESCRIPTION=
COMPONENTS_SHAREDDLL_DISPLAY_NAME=Shared DLL's
COMPANY_NAME=NetObjects
DIALOGSHOWREGISTERUSEREX_MSG=Please enter your name, the name of your company, and your serial number below. You'll find your serial number on your registration card.
COMPONENTS_TUTORIAL_DESCRIPTION=This installs files you need to complete lessons in Building Business Web Sites, a guide that teaches you the basics of NetObjects Fusion 5.0.
COMPANY_NAME16=NetObjects
OLDSTYLECHECK_DIRECTORY_TITLE=Locate Previous Version
DIALOGSHOWSDFINISHREBOOT_MSG1=Setup has finished copying files to your computer. NetObjects Fusion 5.0 will not launch correctly until after you restart.
ASK_YESNO_INSTALLIE5_MSG1=If you do not install Internet Explorer now, you can make these features available by installing it later. To enjoy all the innovative features of NetObjects Fusion 5.0 right away, install Internet Explorer now.\n\nWould you like to install IE5 now?
FOUNDTRIAL_QUESTION_TRIAL=Setup has detected that Monaco.x Trial is currently installed on this computer.\nIt is highly recommended that you uninstall the trial version before proceeding with this installation.\n\nWould you like to exit now?
ASK_YESNO_README_TITLE=View ReadMe?
COPYFONTS_MSG=Copying Font Files - Please Wait!
ERROR_FILEGROUP=File Group:
ERROR_MOVEDATA=An error occurred during the move data process: %d
PRODUCT_VERSION=5.0
DIALOGSHOWSDFINISHREBOOT_MSG2=If you choose to restart, please remove any floppy disks from their drives. Click Finish to complete Setup.
DIALOGSHOWSDASKDESTPATH_FREE_DISK_SPACE_COMPACT=Setup requires 50MB of free hard disk space in order to install this option.\n
FOUNDTRIAL_QUESTION_PR=Setup has detected that Monaco Pre-Release is currently installed on this computer.\nIt is highly recommended that you uninstall the Pre-Release before proceeding with this installation.\n\nWould you like to exit now?
COMPONENTS_HELP_DISPLAY_NAME=Help Files
COMPONENTS_HELP_DESCRIPTION=These files comprise the help system. After installation, see help by choosing Help Topics from the Help menu. (Recommended)
DIALOGSHOWSDLICENSE_QUESTION=Do you accept all the terms of the preceding license agreement? If so, click Yes. Click No to exit the installer.
OLDSTYLECHECK_DIRECTORY_MSG=Please identify the folder where you previously installed NetObjects Fusion. For example: c:\NetObjects Fusion 4.0.1\nSetup will copy all SiteStyles from this location to the NetObjects Fusion 5.0 installation folder.\n
OLDSTYLECHECK_INVALID_PATH=The path does not point to a valid NetObjects Fusion installation. Please try again.
REGISTRY_NODFILETYPE=NetObjectsFusion
INSTALL_IE5_MSG1=After you finish installing NetObjects Fusion, check the Readme file for the location where you can download Internet Explorer 5. To enjoy all the features of NetObjects Fusion, install Internet Explorer before you launch NetObjects Fusion.\n
UNINST_KEY=NetObjects Fusion 5.0 Trial
ASK_YESNO_IE2_MSG=Internet explorer version 3.0 or higher is not present on your system. NetObjects Fusion requires IE3 or higher to run. Netobjects strongly recommends you to install Internet Explorer 5.0 now so you can enjoy NetObjects Fusion right away. If you choose not to install IE5 now, this installer will close.\n\nWould you like to install IE5 now?
COPYDOCS_MSG=Would you like to copy Adobe Acrobat versions of the NetObjects Fusion 5.0 \ndocumentation to your hard drive? (29MB required).
DIALOGSHOWREGISTERUSEREX_BAD_SERIALNUM=The serial number you've entered is not valid.\nIf you do not enter a valid serial number, the \ninstallation program will exit.\n\nWould you like to try entering it again?
DIALOGSHOWSDASKDESTPATH_INSTALL_LOCAL_DRIVE=Monaco can only be installed to a local hard drive. Please choose a different drive.
DIALOGSHOWSDWELCOME_TITLE=Welcome to NetObjects Fusion 5.0
LOCAL_STRING=enus
REGISTRY_NFTFILETYPE=NetObjectsFusion.Template
ASK_YESNO_INSTALLIE5_MSG=Internet Explorer (version 4.01 or higher) is not present on your system. NetObjects strongly recommends you install Internet Explorer so you can do the following in NetObjects Fusion:\n\n--Automatically access new and updated resources and tools\n--Learn how to plan, design, and promote your site\n--Use wizards to easily add exciting content to your pages\n--Preview HTML pages and cascading paragraph styles within NetObjects Fusion \n
COMPONENTS_TEMPLATES_DESCRIPTION=These are NetObjects Fusion 5.0 Templates (.nft files) from which you can base your sites.
PRODUCT_NAME16=Fusion
DIALOGSHOWSDWELCOME_MSG_FULL=Here are a few things to check before you install NetObjects Fusion 5.0.
DIALOGSHOWSDWELCOME_TITLE_TRIAL=Welcome to NetObjects Fusion 5.0 Trial
ASK_YESNO_COMPONENTS=You have not selected any Components for installation.\nWould you like to go back and select again?\n(Note: Choosing "No" will exit the installation program.)
COMPONENTS_COMPONENTS_DISPLAY_NAME=Components
COMPONENTS_STYLES_DISPLAY_NAME=Styles
COMPONENTS_HELP_STATUS_TEXT=Now Copying Help Files...
ASK_YESNO_README_MSG=Would you like to view the Readme.htm file now?
COMPANY_PRODUCT=NetObjects Fusion
ERROR_FILE=File:
ERROR_VGARESOLUTION=This program requires VGA or better resolution.
DIALOGSHOWSDASKDESTPATH_FREE_DISK_SPACE_OPTIONS=\nYou have three options:\n\n1. You can exit Setup and free up more space.\n2. You can install Monaco on a different drive.\n3. You can choose a configuration that requires less hard disk space.
COMPONENTS_SHAREDDLL_DESCRIPTION=[Shared DLL Text Here]
COPYDOCS_COPYFAILED=Setup could not copy the document files to your hard drive--it could be\nout of space. The document files can also be found on the CD.
DIALOGSHOWSDASKDESTPATH_FREE_DISK_SPACE_TYPICAL=Setup requires 100MB of free hard disk space in order to install this option.
ERROR_UNINSTSETUP=unInstaller setup failed to initialize. You may not be able to uninstall this product.
PRODUCT_NAME=Fusion
PRODUCT_FULL_NAME=NetObjects Fusion 5.0 Trial
INSTALL_IE5_MSG=Internet Explorer (version 4.01 or higher) is not present on your system.NetObjects\nstrongly recommends you install Internet Explorer so you can do the following in \nNetObjects Fusion:\n\n--Automatically access new and updated resources and tools\n--Learn how to plan, design, and promote your site\n--Use wizards to easily add exciting content to your pages\n--Preview HTML pages and cascading paragraph styles within NetObjects Fusion \n\n
DIALOGSHOWSDFINISHREBOOT_MSG1_TRIAL=Setup has finished copying files to your computer. NetObjects Fusion 5.0 Trial will not launch correctly until after you restart.
DIALOGUPGRADE_ASKSERIAL_TITLE=Serial Number Verification
COMPONENTS_SAMPLES_DISPLAY_NAME=Sample Files
COMPONENTS_TUTORIAL_DISPLAY_NAME=Tutorial
COMPONENTS_PROGRAMFILES_STATUS_TEXT=Now Copying Program Files...
DIALOGSHOWSDSETUPTYPE_MSG=Please choose how you would like to set up NetObjects Fusion.