home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Multimedia Studio Effects
/
MULTIMEDIA.ISO
/
programs
/
tommycad
/
history.txt
< prev
next >
Wrap
Text File
|
1995-02-09
|
5KB
|
128 lines
Version history of TommySoftware« CAD/DRAW
==========================================
Version 2.00 -> 2.01 (13 July 1994)
-----------------------------------
+ System Fault when creating ellipse parts or ellipse torus parts. After
selecting "Ignore", the program works on, but the created object is not
correct.
+ Error when printing "medium" page sizes between 40 ╫ 40 and 150 ╫ 150 cm.
Drawing was printed too small and reflected.
Version 1.11b -> 2.00 (9 May 1994)
----------------------------------
+ The following new commands have been implemented:
File>Backup drawing
File>Restore drawing
Filei>Autosave...
Construction>Intersection>All objects
Construction>Line>Direction - end-points
Construction>Line>Direction - length
Construction>Line>Angle - length
Construction>Line>Bisector - end-point
Construction>Tangent>Circle - point - end-points
Construction>Tangent>Circle - angle - end-points
Construction>Circle>Line - line - line
Construction>Circle>Point - point - radius
Construction>Circle>Line - line - radius
Construction>Circle>Line - circle - radius
Construction>Circle>Circle - circle - radius
Construction>Division>Circle arc
Construction>Division>Ellipse
Construction>Division>Ellipse arc
Construction>Division>Helix
Construction>Multiple copy>Circle arc
Construction>Multiple copy>Ellipse
Construction>Multiple copy>Ellipse arc
Construction>Multiple copy>Helix
Selection>Edit frame>Scale
Selection>Edit scale>Rotate / Distort
Special>Generate outline
Special> - Layer...
Special> - Parameters...
Design>Lines -> BΘziers
Design>Polyline -> BΘzier chain
Design>Load image...
Design>Display image...
Design>Close image
A complete description of these commands can be found in the help and in
the manual.
+ Licensing the program is now done by means of the command Help>License. You
have to enter the serial number that is attached to your personal manual.
+ Starting from version 2.00, TommySoftware CAD/DRAW does only work under
Windows 3.1 or Windows NT. Windows 3.0 is no longer supported.
+ SETUP.EXE has been replaced with an installation program running under
Windows 3.1. It allows to install into subdirectories and creates a group in
the Program Manager.
The mailbox version now resides in a single archive (TSCD20.ZIP).
Version 1.11a -> 1.11b (17 Jan 1994)
------------------------------------
+ If layer 1 was faded out, all texts and symbols were initially invisible
after insertion even if they were assigned to visible layers.
+ New information files added: FEATURES.TXT, HISTORY.TXT
Version 1.11 -> 1.11a (20 Oct 1993)
-----------------------------------
+ Fix of system crash when moving a single definition point. Did only occur
if dimensions were involved.
+ SETUP.EXE instead of SETUP.BAT, allowing more confortable installation.
+ New information files added: VENDOR.TXT, FILE_ID.DIZ
Version 1.10b -> 1.11 (02 Sep 1993)
-----------------------------------
+ Printer output of medium-sized drawings (40x40 to 150x150 cm / 15x15 to 60x60
inch) uses a higher internal resolution, increasing the printing accurary by
about 400%. Especially useful when printing DIN A3 or 11 x 17 inch.
+ The definition of "inch" was changed from 25.3995 mm to 25.4 mm.
+ All converters where replaced with an updated version 1.30.
Version 1.10a -> 1.10b (19 Apr 1993)
------------------------------------
+ When printing multiple copies to HP DeskJet printers, only the first copy was
printed correctly. All other copies were printed as empty pages.
+ Improved SETUP.BAT, allows direct installation to drives A: to F: and updates
the settings automatically.
Version 1.06 -> 1.10a (08 Feb 1993)
-----------------------------------
+ New startup-box that allows to select the country CAD/DRAW will be used in.
When registering, the registration form is automatically selected according
to this selection.
+ Mailbox version of CAD/DRAW was re-archived to four instead of five archives.
Version 1.05 -> 1.06 (20 Nov 1992)
----------------------------------
+ On some machines the output routines (printing, copying to clipboard) were
cancelled hazardly when Windows Clock was active.
+ The standard settings requested a minimum of 2 MB RAM for object data. This
caused CAD/DRAW to fail on 2 MB machines. Reduced to 256 KB.
+ All convertes where replaced with an updated version 1.10.
Version 1.05 (09 Sep 1992)
--------------------------
- Initial release -
___
Every new version usually contains completely or partly updated registration
forms for all countries.