1 ERROR - Unable to run the installer. Please make sure that your NOLF CD is in the CD-ROM drive and try again.
2 ERROR - Unable to launch the game. Please make sure that NOLF is installed properly.
3 ERROR - Could not find resource name in CRes.dll. Please make sure that NOLF is installed properly.
4 ERROR - Unable to launch the setup program. Please make sure that your NOLF CD is in the CD-ROM drive and try again.
5 ERROR - Could not load CRes.dll. Please make sure that NOLF is installed properly.
6 ERROR - Could not launch LITHTECH.EXE. Please make sure that NOLF is installed properly.
7 ERROR - Unable to launch the uninstaller. Please make sure that NOLF is installed properly.
8 Please insert the No One Lives Forever Disc 1 CD-ROM into your CD-ROM drive.
9 No One Lives Forever
10 ERROR - Can't access the game previews. Please make sure that your NOLF Disc 1 CD is in the CD-ROM drive and try again.
11 There are no games to preview on this CD.
12 ERROR - Unable to launch the NOLF help file. Please make sure that NOLF is installed properly.
13 $(LT2_DIR)\api
14 Please remove the No One Lives Forvever Disc 2 CD-ROM from your CD-ROM drive and replace it with the No One Lives Forever Disc 1 CD-ROM.
16 No additional NOLF .REZ files were found in the "Custom" folder. NOLF add-on .REZ files must be placed in a folder called "Custom".
17 ERROR - Unable to find the NOLF.rez file. Please make sure that NOLF is installed properly and that your NOLF disc 1 CD is in the CD-ROM drive.
18 The available display options on your system will now be enumerated. This may take some time depending on what hardware is installed.\n\nIf nothing shows up in the display dialog, please verify that DirectX 7.0 is installed properly on your system.
19 3DFX VooDoo Graphics (Voodoo1)\n\n3DFX Interactive - http://www.3dfx.com\n\nIn order to get the best performance from any 3DFX-based card, we STRONGLY recommend that you upgrade to the latest 3DFX reference drivers.\n\nYou can get the most recent reference drivers from the 3DFX website, or you card manufacturer's site. There are also 3DFX Voodoo-1 Reference Drivers contained in a "3DFX" directory on the NOLF CD.\n\nRecommended Display Settings:\nMedium\n\nRecommended Advanced Settings:\nNONE\n
20 3DFX VooDoo2\n\n3DFX Interactive - http://www.3dfx.com\n\nIn order to get the best performance from any 3DFX-based card, we STRONGLY recommend that you upgrade to the latest 3DFX reference drivers.\n\nWe have found that the latest 3DFX Voodoo2 reference drivers work fairly well under DX6. As of this version of NOLF, the latest 3DFX Voodoo2 DX6 Reference Drivers should be available from 3DFX or your card manufacturer. There are also older 3DFX reference drivers contained in a "3DFX" directory on the NOLF CD.\n\nRecommended Display Settings:\n-HIGH\n\nRecommended Advanced Settings:\n-DISABLE TRIPLE BUFFERING ON THIS CARD.\n
21 3DFX Banshee\n\n3DFX Interactive - http://www.3dfx.com\n\nIn order to get the best performance from any 3DFX-based card, we STRONGLY recommend that you upgrade to the latest 3DFX reference drivers.\n\nRecommended Display Settings:\nHIGH\n
22 Intel i740\n\nhttp://drivers.lith.com\n
23 G200 Millenium and Mystique\n\nMatrox - http://www.matrox.com/mgaweb/drivers\n\nPlease check the Matrox website for drivers.lith.com for the most recently released drivers for all Matrox products. D3D driver support is generally good.\n\nRecommended Display Settings:\n-MEDIUM\n
24 Riva TNT\n\nnVidia - http://www.nVidia.com\n\nBe sure to upgrade to the most recent drivers for all TNT cards. Check your card manufacturer's site or the nVidia site for details.\n\nRecommended Display Settings:\nHIGH\n
25 Riva 128/128ZX\n \nnVidia - http://www.nVidia.com\n\nBe sure to upgrade to the most recent drivers from nVidia for these cards.\n\nRecommended Display Settings:\nWith drivers released after 9-15-98, MEDIUM\n\nWith drivers released before 9-15-98, LOW\n\nRunning in HIGH or MEDIUM with the currently drivers released before 9-15-98 will result in gray-shaded world polygons.
26 Rage Pro\n\nATI - http://support.atitech.ca/drivers\n \nPlease check the ATI website for the most up to date drivers avaiable. This chipset was used and is used on many, many ATI cards.\n\nDoesn't bilinear filter the alpha channel so stuff with alpha looks all pixelated even though the RGB is all pixelated.\n\nRecommended Display Settings:\nLOW\n
27 Permedia2\n\n3DLabs - http://www.3dlabs.com/drivers\n\nWorks well, although no lightmapping.\n\nRecommended Display Settings:\nLOW or MEDIUM (lightmapping will automatically be turned off on this card)\n\nRecommended Advanced Settings:\nNONE
28 Rendition V2100/V2200\n\nRendition - http://www.rendition.com\n\nWorks well, supports all features in NOLF.\n\nRecommended Display Settings:\nLOW, or MEDIUM \nRecommended Advanced Settings:\nNONE\n
29 S3 Savage\n\nS3 - http://www.s3.com\n\nDISABLE FOG! There may be problems with this card and the fog settings in NOLF. Disabling fog will not provide a performance increase or decrease.\n\nRecommended Display Settings:\nHIGH\n\nRecommended Advanced Settings:\nCheck "Disable Fog" in the advanced options.\n
30 Virge (Diamond Stealth 3D Pro 2000, IMagic 3D)\n\nS3 - http://www.s3.com\n\nGet the most recent drivers from the S3 site. This board was an OEM video card in many, many PC's. The 3D hardware performance is questionable, but D3D will recognize this card as a 3D hardware accelerator.\n\nLightmapping and screen flash not supported.\n\nRecommended Display Settings:\nLOW,\nRecommended Advanced Settings:\nNONE\n
31 Matrox M3D\n\nMatrox - http://www.matrox.com/mgaweb/drivers\n\nPlease check the Matrox website for drivers.lith.com for the most recently released drivers for all Matrox products. D3D driver support is generally good.\n\nThis card is based on a version of the NEC PowerVR chipset.\n\nYou may need to update your drivers through device manager instead of the setup program that comes with the driver set\n\nNOLF detects that this card can't do LightMapping or "light add poly" and disables both\n\nMay experience texture mipmapping glitches\n\nChromed models are REALLY slow, so enabling Environment Mapping through the menus is not recommended \n\nSome textures with alpha (4444) draw with alpha blending even if the alphablendenable state is off\n\nRecommended Display Settings:\nLOW\n\nRecommended Advanced Settings:\nNONE (NOLF detects this card automatically)\n
32 Matrox MGA-1064 (Millenium II and Mystique)\n\nMatrox - http://www.matrox.com/mgaweb/drivers\n\nPlease check the Matrox website for drivers.lith.com for the most recently released drivers for all Matrox products. D3D driver support is generally good.\n\nRecommended Display Settings:\nLOW\n\nRecommended Advanced Settings:\nNONE\n
33 Rendition V1000\n\nRendition - http://www.rendition.com\n\nAn older card, but should work properly with NOLF.\n\nRecommended Display Settings:\nLOW. 512x384\n\nRecommended Advanced Settings:\nNONE\n
34 This will disable all sound effects in NOLF.
35 This will disable NOLF's use of DirectMusic. Some sound cards may have incompatibilities with DirectMusic. Use this for troubleshooting only.
36 This will disable the logo and intro movies from playing every time.
38 This will disable all atmospheric (not clipping plane) fog. There should be no performance increase nor decrease. However, this might possibly be useful on cards that "almost" support table fog.
42 This will disable all joysticks and gamepads in NOLF. Use this if your particular joystick is causing problems with NOLF at startup.
45 This will disable a feature on some video cards that can improve performance, but uses more of the card's video memory as a result. Most AGP video cards benefit from this feature being enabled. However, this may cause lock-ups on a few PCI video cards.
46 This will disable the use of a hardware cursor. Some older cards do not support the hardware cursor.
47 This will disable the use of an animated loading screen. Use this for troubleshooting.
48 This restores all configuration settings to the original defaults. This includes resetting the key configuration, detail level and sound options. This is useful if you've changed settings, and you just want things back the way they were.
49 This is for advanced users only. The command line is used for setting console variables at startup.
50 WARNING! Tinkering with the advanced options can cause the game to run worse (or not at all) depending on your system configuration. Please click on the "Help" button for information on each advanced option before using them.
51 No renderers were found. This problem is usually due to DirectX 7.0 not being properly installed. Please verify that DirectX 7.0 is installed and re-run the installer if necessary.
52 ERROR - Unable to launch the web page. Please make sure that your web browser and internet connection are configured properly.
53 http://www.the-operative.com
54 NOLF.hlp
55 http://www.lith.com
57 No One Lives Forever Demo
58 No One Lives Forever Demo
59 \DATA\NOLF.REZ
60 \DATA\NOLF2.REZ
61 SETUP.EXE
62 NOLF
63 1
64 NOLF is already running.
65 There are no 3D sound providers available on this system.
66 No 3D sound
67 The 3D sound hardware on your system will now be queried. This may take up to a minute and you may hear a few pops and clicks.
68 No One Lives Forever
72 Rage 128\n\nATI - http://support.atitech.ca/drivers\n\nPlease check the ATI website for the most up to date drivers avaiable.\n\nRecommended Display Settings:\nHIGH\n
