Media Share 9

home *** CD-ROM | disk | FTP | other *** search

/ Media Share 9 / MEDIASHARE_09.ISO / bbs / mezz443.zip / MEZANINE.DOC < prev next >

Wrap

Text File | 1993-03-20 | 81KB | 1,777 lines

METRO-MEZZANINE, Type IV Version 4.43 By Steven H. Lin Copyright 1992 by Steven H. Lin All rights reserved GENERAL OPERATIONS MANUAL ----------------------------------------------------------------------------- CONTENTS 1.0 Introduction 2.0 Registration 3.0 The Purpose of Metro-Mezzanine 4.0 Requirements 5.0 Installation 6.0 Setup 7.0 Task Management 8.0 Product Support 9.0 Acknowledgements 10.0 Final Words 11.0 Registration Form ----------------------------------------------------------------------------- 1.0 INTRODUCTION If you are a BBS aficionado type of system operator (sysop), then Metro-Mezzanine may be for you. Testing more than one BBS program at a time, or just running your usual one while testing another for whatever reason, can be time- and space-consuming as you struggle with rearranging your hard disk and other facets of your system to accomodate each BBS program as much as you can without adversely affecting the others. Metro-Mezzanine can help, by making access to the different BBS programs (or even to just ONE, if you need a special customizable front-end program between your mailer and your BBS) as painless as possible. In this age of sophistication, making things more palatable is a definite plus. 1.1 Warning - If you have never used a program from [The Deviant's Palace], then you may be in for a massive shock. Please, if you suffer from an angina pectoris condition, keep your supply of amyl nitrate or nitroglycerin within easy reach. If you are using stronger medications, like calcium channel blocking agents (most notably verapamil) or ß-adrenoceptor blocking agents (AKA "beta blockers"), you may want to have some experienced medical personnel nearby to monitor your health condition as you set up Metro-Mezzanine. Use Metro-Mezzanine at your own risk. If you suffer from psychological problems or disabilities, Metro-Mezzanine is not guaranteed to not injury your psyche. Use Metro-Mezzanine at your own risk. 1.2 License Agreement - The author of Metro-Mezzanine has taken every precaution to insure that no harm or damage will occur on computer systems operating the Metro-Mezzanine package. Nevertheless, the author of Metro-Mezzanine shall NOT be held liable for whatever may happen on your computer system or to any computer systems which connect to your own as a result of operating the Metro-Mezzanine package. The user assumes full responsibility for the correct operation of this software package, whether harm or damage results from software error, hardware malfunction, or operator error. NO warranties are offered, expressly stated or implied, including without limitation or restriction any warranties of operation for a particular purpose and/or merchantability. The Metro-Mezzanine main program, setup program, and documentation are copyrighted products of Steven H. Lin. Steven H. Lin reserves all rights to these products. This is protected by the United States of America (USA) and International Copyright Laws. In no way shall the components of the Metro-Mezzanine software package be reproduced or modified in any form or method without prior expressly written permission from Steven H. Lin. Steven H. Lin grants an unlimited license for the purpose of dis- tributing unregistered copies of the Metro-Mezzanine software package to the public when such unregistered copies are released from [The Deviant's Palace]. Tampering with or altering the contents or integrity of the Metro-Mezzanine software package is prohibited. No fee may be charged by any agency other than Steven H. Lin beyond cost of distributing unregistered copies without prior expressly written permission from Steven H. Lin. Metro-Mezzanine is distributed under the Shareware concept. You are allowed to operate Metro-Mezzanine for a trial period of thirty (30) days. After this trial period, you must register Metro-Mezzanine or discontinue its usage. Continued operation of Metro-Mezzanine past the above stated trial period requires full registration payment. The transfer of copyright ownership of Metro-Mezzanine from DevPal MetroNet Communications, Inc. to the author of Metro-Mezzanine, Steven H. Lin, does not in any way change the license agreement explained above. 1.3 The New and the Old - For newbies (AKA people who are using Metro-Mezzanine for the first time), Metro-Mezzanine will be a brand-new experience, something which is not too difficult to set up, particularly managing the interface between your choice of BBS front-end/mailer, Metro- Mezzanine, and your BBS programs. On the other hand, for the oldsies (AKA people who have used previous Types of Metro-Mezzanine (ie. Types I, II, and III)), reading this document will be a GREAT help, especially for those who are less inclined to "fool around and figure things out" for themselves. Anyway, even these more technically-oriented people will have some difficulty in figuring out the method to the madness that Metro-Mezzanine's programmer exhibits. The reason for this is simple: although superficially, many of Metro-Mezzanine's features are very familiar to the oldsies, the fundamental design of Metro-Mezzanine was radically changed (some might even consider it to be greatly improved!). There was an attempt to keep as many items familiar to the oldsies as possible to reduce the confusion in the upgrade process; however, some of the new features and options could not be reconciled with the old design, for obvious reasons (which you oldsies will see). ----------------------------------------------------------------------------- 2.0 REGISTRATION Registration of Metro-Mezzanine is mandatory if you wish to continue using Metro-Mezzanine past the thirty-day trial period. The unregistered demo mode of Metro-Mezzanine is fully functional, but it does NOT have the bonus features which are available to registered sysops to further enhance the performance and versatility of Metro-Mezzanine. To put it in another light, the unregistered demo mode has the necessary basic con- figuration for Metro-Mezzanine, while the registered mode possesses the full-blown maximally-expanded configuration. Many of the features mentioned in this text will apply only to the registered version; when running the unregistered demo, it will become obvious which capabilities are not included in the basic package. This document will, thus, still be very useful when you register your product; it is highly recommended that you have this document formatted and printed out nicely so that you will have a permanent reference source readily available to you when needed. There are different registration plans available, depending upon which category your system falls into: Non-Commercial System Commercial System System with Registered DevOnline Product(s) After reading sections 2.1 - 2.4, complete the registration form at the end of this document. Issue a check or money order to STEVEN H. LIN. Send the registration form and the check or money order to: Steven H. Lin DevPal MetroNet Communications 1251 NE 108th Street, #621 Miami, Florida 33161 United States of America 2.1 Instructions for Non-Commercial Systems - To be considered a "non-commercial system", your system must be physically located in a private residence and NOT be engaged in commercial activities. These commercial activities include, but are not limited to: Subscription/registration REQUIRED for system access Subscription/registration REQUIRED for access to a part of the system Product support for a product written or marketed by the system operator(s) engaged in running, or aiding in running, the system. Product support for materials which the system operator(s) have agreed to manage for the authors of those materials. This includes ASP distribution sites. The registration fees for a non-commercial system are: $20.00 US 2.2 Instructions for Commercial Systems - To be considered a "commercial system", your system must be physically located in a non-private residence OR be engaged in commercial activities. These commercial activities include, but are not limited to: Subscription/registration REQUIRED for system access Subscription/registration REQUIRED for access to a part of the system Product support for a product written or marketed by the system operator(s) engaged in running, or aiding in running, the system. Product support for materials which the system operator(s) have agreed to manage for the authors of those materials. This includes ASP distribution sites. The registration fee for a commercial system is: $35.00 US 2.3 Instructions for Systems with Registered DevOnline(tm) Products - The limited-time discount offer program previously available to individuals who have registered other DevOnline products has concluded; this payment option is no longer in effect, as of the first public release of Metro-Mezzanine Type IV. If you are registering Metro-Mezzanine, check to make sure that you are either registering under the commercial or non-commercial plans listed in Sections 2.1 and 2.2. 2.4 Additional Costs - In addition to registration of Metro-Mezzanine, there may be other costs, depending on the method of delivery that you choose. Delivery of registration key via FidoNet NetMail: FREE Download of registration key from DevPalMiami : FREE Complete registered version sent via USPS mail : $5.00 US If you decide upon downloading the registration key from DevPalMiami, remember to provide a filename and a security password for the archive in which your key will be placed. If you wish to access [The Deviant's Palace] at Miami computer system metronetwork (AKA DevPalMiami), there are currently three accounts available to DevOnline product registrants: Basic status: 30-45 minutes per day Regular status: 60 minutes per day Executive/Preferred: 120 minutes per day Each of the accounts have above-average downloading privileges, but the Executive/Preferred account has by far the most lenient. All subscription rates are discounted from their standard rates, so that DevOnline registrants may take advantage of many of the special and unique features at DevPalMiami. ----------------------------------------------------------------------------- 3.0 THE PURPOSE OF METRO-MEZZANINE Metro-Mezzanine is a BBS carousel, in the tradition of Ghostwheel, the earliest ever produced. Metro-Mezzanine's history is long and involved, but it essentially begins with Ghostwheel, from which the Matrix login method was adapted and also from which simple analogs were made by others. Now the development cycle comes full circle, as Ghostwheel is now resurrected for widespread use in the form of Metro-Mezzanine. Why settle for a poor shade of Ghostwheel when you can have THE successor to Ghostwheel? But what is a BBS carousel? Whenever a sysop decides that operating more than one BBS program is necessary (perhaps by joining different BBS programs with different strengths together, the end effect is much greater than the sum of the total, or perhaps more security is required than can be supplied by one BBS program, or perhaps the sysop just wants to test out a new BBS program with his enterprising users without having to drop his existing BBS package and the users who wish to enjoy the status quo), a BBS carousel is a logical solution. This is a program which allows the sysop to offer his users the choice to access any of a number of BBS programs that are running on his system, in a metronet-like fashion. In addition, Metro-Mezzanine has other features which will aid the sysop in directing his users: An easy-to-use menu construction system, comparable to (but simpler than) the TBBS/QuickBBS/RemoteAccess menu language. The ability to display text files as well as jump to different BBS programs, individually and in tandem. Also, the ability to offer an easy-to-maintain bulletin selection menu system if so desired. The flexibility of errorlevels to initiate access to each BBS program. The ability to offer downloading of files specified by the sysop for his users via Omen Technology's DSZ protocol subsystem. 3.1 Greater Utility in This Age of Technology - The initial release of Metro-Mezzanine was never intended to make as great an impact as it has. Unbeknownst to the author, there are substantially more people eager for a BBS carousel than originally estimated, by at least 580%. A major impact Metro-Mezzanine has made is on systems operating within more than one mail network: the use of Metro-Mezzanine to allow access to multiple BBS partitions, with each partition operating within a different mail network, is tremendously popular. DevPalMiami itself is able to operate within several mail networks using different technologies (FidoNet, QWK, ExecNet, and VBBS methods) because of Metro-Mezzanine. This incredible expansion of connectivity and configurability frees sysops from needing all sorts of ugly, kludgy methods of trying to tie together different technologies and lets them concentrate on the important aspects of running a colorful, diversified system. If you want to operate your system within more than one mail network, then Metro-Mezzanine is an excellent option for you. 3.1.1 "Take two!" (4 December 1992) - Well, it has been several months since I made the statement in Section 3.1. Here is an update: Interest in Metro-Mezzanine has continued to grow exponentially as new BBS products, such as more versatile BBS programs and graphics-oriented BBS programs and new mail networking technologies and many other new developments, keep appearing on the Modemland scene. Because of this, Metro-Mezzanine is taking on more and more innovative features to accomodate everybody's needs. However, I realize that there are many features that I have not even thought of, which could be introduced into Metro-Mezzanine or provided as an add-on module to Metro-Mezzanine. If you have any ideas on how to improve Metro-Mezzanine's usefulness to Modemland, feel free to let me know. At this point, improving Metro-Mezzanine will be helping literally THOUSANDS of BBS sysops worldwide. Help us to help yourself and the grateful masses. Thanks. - S/L ----------------------------------------------------------------------------- 4.0 REQUIREMENTS 4.1 General System Requirements - The following are the requirements for using Metro-Mezzanine: An MS-DOS computer A modem At least one BBS program or telecommunications host package A front-end/mailer (eg. FrontDoor, BinkleyTerm) An ANSI driver At least 250Kb of hard disk space... (can be run from floppy, but what about the BBS's?) As much RAM as needed for the most memory-requiring of the BBS programs or telecommunications host packages used 4.2 Environments - Metro-Mezzanine will work under the following environments (although it is certainly not limited to only the following): Artisoft LANtastic 3.3 - 4.1 Compaq MS-DOS 3.31 Digital Research DR-DOS 5.0 - 6.0 Microsoft MS-DOS 3.3 - 5.0 Quarterdeck DesqView 2.31 - 2.42 4.3 Memory Managers - Metro-Mezzanine appears well-behaved when operating under memory management programs, such as 386-to-the-Max, HIMEM, QEMM-386, and NetRoom. This is primarily because Metro-Mezzanine does not perform any unusual operations in high memory areas (ie. extended memory, expanded memory). It is also strongly advised that Metro-Mezzanine NOT be loaded into any high memory areas. ----------------------------------------------------------------------------- 5.0 INSTALLATION Installation is fairly simple. Make a directory somewhere for the placement of Metro-Mezzanine. Then unZIP the archive into that directory. At this point, you will have a batch file called INSTALL.BAT in your directory. Run it, and it will go ahead and establish some directories needed by Metro-Mezzanine and break out some files from a self-extracting archive. Now you are finished with the installation of the program. 5.1 READ.ME - It is a very good idea to read the READ.ME file to make sure that you have not missed any important notes or comments concerning the version of Metro-Mezzanine you are using. 5.2 Upgrading from Older Versions of Metro-Mezzanine - Type IV is so radically different from previous Types that you will not be able to upgrade your Metro-Mezzanine setup. You will have to start anew. ----------------------------------------------------------------------------- 6.0 SETUP Setup involves several steps: Running the Metro-Mezzanine setup program (MEZSETUP) to initialize the needed data files and to accept your choices for access in Metro-Mezzanine. Setting up your BBS batch file to handle Metro-Mezzanine. Modifying DOOR information files to handle incoming callers. 6.1 The Metro-Mezzanine Setup Program - In your Metro-Mezzanine directory, there is a program called MEZSETUP.EXE. To run it, type the following at your DOS command prompt: MEZSETUP You will be given a screen display announcing the program, then you will asked to hit <ENTER>, whereupon you will be presented with the main MezSetup menu. Metro-Mezzanine Type IV has a few options at the main menu of its setup program, and they are arranged as follows: MezSetup 4.12 (12/03/1992) --------------------------------------------------------- [A] Create/Edit/Delete Tasks [B] Set Welcome/Intro Task [C] Set Initial Menu Task [D] Set Default Command Prompt [E] Set Protocol Menu Name [F] Set Registration Screen Display [G] Set Excessive C/R Limit [?] Show Status of Filenames [Q]UIT MezSetup [MezSetup]: At the prompt, you may enter the option you wish. 6.1.1 The impropriety of NOT registering Metro-Mezzanine - The unregistered Metro-Mezzanine does not offer all of the fringe benefits shown in the screen above. The unregistered Metro-Mezzanine works as a simple yet efficient BBS carousel. There is no need to worry about all sorts of confusing options that registered users have to contend with. The following descriptions of the features within MezSetup that are available in the registered version are marked with the "{+}" symbol. Please make a note of them. On the other hand, the registered Metro-Mezzanine is jam-packed with many useful extra features that enable any creative user the ability to transform Metro-Mezzanine into an expression of his or her own conception of a BBS metronetwork. 6.1.2 Create/Edit/Delete Tasks - This is the heart of the Metro-Mezzanine setup process. The term "Task" is used to refer to what was once known as a "Partition": that is, Tasks are what constitute all of the activities which can be performed within Metro-Mezzanine. It may be a command to access a BBS program or a utility; it may be a command to display a text file; it may even be a command to download a file to the user. This command allows you to provide Metro-Mezzanine with the necessary options so that your users may perform whatever functions you wish to allow them in the BBS carousel. Metro-Mezzanine stores all of its Task data files (these are files with the .TSK file extension) in the DATA subdirectory (which was created during the installation process earlier). Metro-Mezzanine starts with a couple of pre-named Tasks. These are the WELCOME and MAIN Tasks. They are blank: that is, although they exist, -you- need to fill in the appropriate information to make them do what you need them to do. When you access this command, you will see a list of current Tasks in the DATA subdirectory. Hence, you should see both WELCOME.TSK and MAIN.TSK listed. The screen will look something like this: Current list of Tasks: WELCOME.TSK - NONE [type 0] MAIN.TSK - NONE [type 0] [A]dd Task / [E]dit Task / [D]elete Task / [Q]uit (> From this new prompt (that thing on the screen that looks like "(>"), you can choose one of four options, three of which will help you manage the Tasks on your system. 6.1.2.1 Add Task - This allows you to create new Tasks. This option will first ask you for an eight-character filename for the Task (you might have guessed by now that MezSetup will automatically label all Task files with the file suffix of .TSK). After you enter in your filename, it will allow you to edit the features required to make up a Task. Again, unregistered users are unburdened by all of the complex extra options available to registered users. Consult Section 7.0 for detailed instructions con- cerning Task management. 6.1.2.2 Edit Task - This allows you to edit existing Tasks. It will first ask you for the filename of the Task you desire to edit (excluding the .TSK suffix, of course). Then, it will present you with a palette of all of the features in a Task that you can edit. Again, unregistered users are unburdened by all of the complex extra options available to registered users. Consult Section 7.0 for detailed instructions con- cerning Task management. 6.1.2.3 Delete Task - This allows you to delete existing Tasks. Although you may certainly delete Task data files from your DOS prompt, you can also delete them from within MezSetup, thus negating the need to constantly jump out of MezSetup and then back in during those long marathon sessions of changing or adding features to your Metro-Mezzanine setup. This option asks you for the filename, excluding the .TSK suffix, of the Task you wish to delete. And then, <whooosh!>, the Task is deleted. 6.1.3 Set Welcome/Intro Task {+} - Default: "WELCOME" As mentioned in Section 6.1.2, there is a WELCOME Task already in existence when Metro-Mezzanine is first set up. This is set up as the default Welcome/Intro Task for Metro-Mezzanine. The filename is not alterable by unregistered users, but it CAN be changed if desired by registered users. Selecting this option will allow you to enter in the name of the Task that you wish to be run as the FIRST Task presented to incoming callers. The Welcome/Intro Task is typically a text file display of your choice, but you can make it into one of the other Task Types (see Section 7.0) if desired. 6.1.4 Set Initial Menu Task {+} - Default: "MAIN" As mentioned in Section 6.1.2, there is a MAIN Task already in existence when Metro-Mezzanine is first set up. This is set up as the default Initial Menu Task for Metro-Mezzanine. The filename is not alterable by unregistered users, but it CAN be changed if desired by registered users. Selecting this option will allow you to enter in the name of the Task that you wish to be run as the FIRST Menu Task presented to incoming callers. See Section 7.0 for information concerning Menu Tasks. 6.1.5 Set Default Command Prompt {+} - Default: "[M-M IV]:" In case you omit a configured command prompt design in any of your Tasks, this is a default which will be displayed. It is a good idea to make this pertinent to your system. 6.1.6 Set Protocol Menu Name {+} - Default: "PROTOCOL" This is the text file display shown to users explaining the transfer protocols available for downloading files. 6.1.7 Set Registration Screen Display {+} - Ever get tired of that registration information at the beginning of every Metro-Mezzanine run? This option will let you change it! When you access this option, you will be presented with a short menu, allowing you to pick the type of registration screen you'd like to present to the world. There are three settings for the registration screen MODE: 0 - standard 1 - abbreviated 2 - customized Let's explore each of these settings... Type 0 is the default, and it is the same "boring" registration information that has been displayed ever since Type I (with changes to make it fit Type II, of course). Type 1 is just a one-line description line, identifying the program (Metro-Mezzanine), the program version, and the program's last compilation date. This is very convenient for the sysop who wants a no-nonsense presentation to his users. Type 2 allows for you to make your own registration information screen for Metro-Mezzanine. If you input "2" as your setting, another option will appear in the menu for this section: filename for the registration screen. It is set to a default of "REGINFO.ASC". You may change the filename to fit your personal tastes. Note that this screen should preferably be in ASCII, in case some of your users do not have ANSI capabilities or prefer NOT to see your registration information screen in ANSI. 6.1.8 Set Excessive C/R Limit {+} - Sometimes some users derive immense joy from whacking the <ENTER> key excessively. While this is great fun for them, it may be annoying to you, especially if you happen to pass by and notice the ridiculous tomfoolery on your monitors. What may be worse is that it could be due NOT to the user's antics but a real connection problem. Rather than agonize over this, you can set the excessive C/R limit value to whatever you wish, so that the user will be logged out if there are too many carriage returns sent to your system. 6.1.9 Show Status of Filenames - This command shows you the current settings for some of the filenames used by Metro-Mezzanine. Here is a sample: Initial Menu Task filename: MAIN Welcome/Introduction Task filename: WELCOME Protocol List filename: PROTOCOL Customized Registration Screen filename: REGINFO.ASC Default command prompt: [M-M IV]: This will always display the latest information, so if you change the data, it will be reflected in this status screen. 6.2 Setting up your BBS batch file - This is a crucial step, because if this is improperly set up, your system will not function well with Metro-Mezzanine. However, luckily, this is an easy step, too. Include the following paradigm in the BBS batch file that you use to access your BBS's: CD <Metro-Mezzanine directory> MEZZ <DOOR info file> If errorlevel <errorlevel value> goto <BBS routine> If errorlevel <errorlevel value> goto <BBS routine> If errorlevel <errorlevel value> goto <BBS routine> If errorlevel <errorlevel value> goto <BBS routine> If errorlevel <errorlevel value> goto <BBS routine> . . (repeat as many times as needed) . The "CD" command is used to switch the system focus into the Metro- Mezzanine directory, so that the next line can work to activate Metro-Mezzanine. The second line, incidentally, will require a DOOR information file... one of the following: DOOR.SYS DORINFO?.DEF PCBOARD.SYS or GENERIC.SYS If your mailer is capable of producing one of the first three DOOR info files, then by all means, have it do so. If not, there are some programs available which will be able to manufacture dummy DOOR info files if given baud rate and comm port information. Or, you may take one of the DOOR info files that your BBS program makes and modify it to match different baud rates and/or comm ports, using your batch file to copy the right file for use by Metro-Mezzanine. Or, even more basic would be to use GENERIC.SYS to run Metro-Mezzanine. Let's explore these options... 6.2.1 Mailer capable of making DOOR information file - This is the simplest option: just have the mailer manufacture of the first three listed DOOR info files, and you're all set. 6.2.2 Dummy DOOR information file generation program - This is a good method, too. Make sure that you inform this program as to what the baud rate and comm port assignments are. Here is an example of the BBS batch file portion used to impart information to Metro-Mezzanine using one of these dummy generators: CD H:\FD\MEZZ MakDRSYS 2400 COM2: MEZZ DOOR.SYS . . . 6.2.3 Copying over DOOR information files - You can grab a DOOR info file used by your BBS (these are rarely deleted whenever a user returns from a DOOR) and take a look inside it. Go ahead and modify it to match the different baud rates and/or comm ports used by your BBS. For instance, you run a 2400-9600 baud system (okay, it comes to two basic baud rates... 2400 and 9600) on COM1:. So you grab yourself a copy of DOOR.SYS that your BBS makes for some DOORs. You change the baud rate line to reflect 2400 baud, then save to another name (D2400.SYS). You do the same thing for 9600 baud (saved to D9600.SYS). Since the DOOR info file already had correct comm port assignment (COM1:), you did not have to change that. The following is a BBS batch file portion which uses this method. It assumes that the baud rate is being passed to it from the mailer directly or the mailer batch file. CD \FD\MEZZ If %1==2400 copy D2400.SYS DOOR.SYS If %1==9600 copy D9600.SYS DOOR.SYS Mezz DOOR.SYS . . . 6.2.4 GENERIC.SYS - This is a special text file used by Metro-Mezzanine in lieu of the other methods mentioned above. It contains three lines: line 1 - <sysop name> line 2 - comm port line 3 - time allowed (in minutes) in M-M A sample GENERIC.SYS might read: Steve COM2: 60 The following is a sample BBS batch file portion which uses the GENERIC.SYS file: CD \BT\MEZZ Mezz GENERIC.SYS . . . Frankly, this method is the preferred one at DevPalMiami because FrontDoor cannot self-generate any DOOR information files, and we would rather not have to spend time copying over DOOR information files from elsewhere. Also, GENERIC.SYS gives us more control over Metro-Mezzanine access, making it even for everybody. If you do not know which method of configuring Metro-Mezzanine (a DOOR information file from your mailer, a copied-over DOOR information file, or GENERIC.SYS), it is suggested that you use GENERIC.SYS. WARNING: Keep the time allowed under 250 minutes! 6.2.5 About errorlevels - The following line: If errorlevel <errorlevel value> goto <BBS routine> can be used as many times as needed. The <errorlevel value> holds whatever errorlevel you specified in MezSetup (see Section 7.0 for information concerning errorlevel usage in the Tasks), while the <BBS routine> is the batch label that is accessed because of that errorlevel. Be careful to make sure that the errorlevels are properly matched to their corresponding labels. 6.3 Non-standard communications port support - Section 6.2 explains how to set up Metro-Mezzanine using a vanilla setup, which works perfectly for most people. However, for the exceptions who, for some strange reason, need (or want) to use a non-standard serial communications port to handle the interface between the modem and the computer, here is the paradigm to do so: MEZZ <DOOR info file> PORT:<port address>:<port number> The <DOOR info file> parameter is for the complete path and filename of the DOOR info file desired for use. The <port address> is the actual base memory address for the serial port. The <port number> is the integer of the serial port which you wish to use for the BBS carousel. For instance: MEZZ h:\fd\mezz\generic.sys PORT:03F8:5 This means that Metro-Mezzanine is using the GENERIC.SYS file for getting pertinent information from the BBS, and the non-standard comm port is accessed at memory location 03F8, and the comm port is known as COM5:. Check the documentation for the non-standard serial port you intend to use for the correct way to install that serial port on your system. 6.4 DigiBoard support - Section 6.2 explains how to set up Metro-Mezzanine using a vanilla setup, which works perfectly for most people. However, for the exceptions who, for some strange reason, need (or want) to use a DigiBoard to handle the interface between the modem and the computer, here is the paradigm to do so: MEZZ <DOOR info file> PORT:D:<port number> The <DOOR info file> parameter is for the complete path and filename of the DOOR info file desired for use. The <port address> is the actual base memory address for the serial port. The <port number> is the integer of the serial port which you wish to use for the DOOR. For instance: MEZZ g:\bt\mezz\pcboard.sys PORT:D:4 This means that Metro-Mezzanine is using the PCBOARD.SYS file for getting pertinent information from the BBS, and the DigiBoard channel being used for Metro-Mezzanine is #4. Check the DigiBoard documentation for the correct way to install it and to use it on your system. ----------------------------------------------------------------------------- 7.0 TASK MANAGEMENT Managing your Tasks with proficiency will allow you to muse about the aesthetics in life rather than worry about the mud-and-sticks mechanics of Metro-Mezzanine. Therefore, it is a good idea to make sure you understand all of the concepts presented in this section of this document. Once again, unregistered users are unencumbered by the extra features available to registered users. These features will be marked by "{+}". Unregistered users are also warned to NOT delete the WELCOME and MAIN Tasks. When designing their systems, they should use the following filenames for their screens: WELCOME.ASC/ANS - Welcome/news text file MAIN.ASC/ANS - Main menu text file 7.1 Task Keys - A "Task Key" is both the command used in Metro-Mezzanine to invoke a Task AND is also the filename used for the Task's data filename (excluding the .TSK suffix)... remember the filenames for the Tasks? So, if you create a Task called "HELP", when the user types HELP in Metro-Mezzanine, it will access the HELP Task. 7.2 Task Types - Before we discuss the commands available in the Task management part of MezSetup, we need to discuss what types of different Tasks can be designed within MezSetup. As mentioned before, Tasks are commands that you create to tell Metro-Mezzanine to do certain things. Therefore, it makes sense to offer different Task Types to allow you to do those things in Metro-Mezzanine. Here is a summary of the Task Types available in Metro-Mezzanine Type IV: 0 - keep the Task INACTIVE 1 - exit with errorlevel 2 - flash text file, then exit with errorlevel {+} 3 - flash text file {+} 4 - flash text file, then hit <RETURN> {+} 5 - download file via DSZ {+} 6 - flash text file, confirm for exiting with errorlevel, then either exit with errorlevel or abort execution {+} 7 - flash text file, confirm for downloading a file with DSZ, then either download file with DSZ or abort execution {+} 8 - go to another Menu Task {+} 9 - flash bulletin menu text file, then accept input for a specific bulletin {+} 10 - hang up, then exit with errorlevel 11 - flash text file, hang up, then exit with errorlevel {+} 12 - flash text file, hit <RETURN>, hang up, then exit with errorlevel {+} 13 - flash text file, confirm that the user wishes to log off, then either hang up and exit with errorlevel or abort execution {+} 14 - like Task Type 2, but with security password check AFTER text file display {+} 15 - like Task Type 6, but with security password check AFTER confirmation {+} 16 - like Task Type 7, but with security password check AFTER confirmation {+} Let us explore each of these tasks... 7.2.1 Type 0 - REQUIRED set/edit: [B] Task Type Optional set/edit: [A] Task Name Type 0 is the default when the Task is first created. Type 0 is a null item: it makes the Task inactive so that a user cannot do anything if they type in the Task key at the Metro-Mezzanine command prompt. 7.2.2 Type 1 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} [I] Task Password {+} Type 1 is a standard exit with an errorlevel. When a user access a Task of this type, Metro-Mezzanine will exit with an errorlevel, and that errorlevel will lead to the appropriate label, as specified in your batch file (see Section 6.2 and Section 6.2.5). It can also be used to log out of your system, assuming that the errorlevel specified for the Task will match an errorlevel in your BBS batch file that leads back to your front-end/mailer. 7.2.3 Type 2 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Type 2 consists of displaying a text file to the user, followed by exiting with an errorlevel. This option is good to use if you want your users to read some information prior to accessing a BBS program (or logging out, or accessing another utility, etc.). 7.2.4 Type 3 - REQUIRED set/edit: [B] Task Type [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Type 3 is a standard text file display. It will display a text file that you specify for that Task. Note that after displaying the text file, there is no pause or request that the user hit the <RETURN> key to continue. So if you have a Menu Task specified with a long menu screen, you might want to select Type 4 to show your text file instead. 7.2.5 Type 4 - REQUIRED set/edit: [B] Task Type [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Type 4 is just like Type 3, except that it asks the user to hit the <RETURN> key after the text file is displayed, in order to continue. 7.2.6 Type 5 - REQUIRED set/edit: [B] Task Type [E] Download File Name {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Type 5 is a file download option. The filename is specified by you for that Task. You MUST have DSZ available, either in the Metro-Mezzanine directory or somewhere along the DOS PATH, in order for this to function properly. 7.2.7 Type 6 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} [I] Task Password {+} Type 6 is similar to Type 2, in that the user is first shown a text file and then later has the opportunity to exit with an errorlevel. However, in between those two processes, the user is asked if he/she WANTS to exit Metro-Mezzanine with that errorlevel. Thus, this is a perfect Task Type to use for New User Logins or for regular BBS Logins where you want the user to read about the BBS that he/she is about to enter and then allow him/her to decide if he/she really wants to access that BBS, or instead go back and make another selection within Metro-Mezzanine. 7.2.8 Type 7 - REQUIRED set/edit: [B] Task Type [D] Text File Name {+} [E] Download File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Like Type 6, Type 7 shows the user a text file and then queries the user about whether he/she would like to do something. In this case, however, instead of exiting with an errorlevel, the user must decide whether to download a file or not. If the user decides that, yes, he/she would like to download the prescribed file, the protocol selection menu will be displayed (requiring the user's choice of transfer protocol to continue) and then the file downloading process will begin. If the user decides to NOT download the file, he/she is merely returned back to the current menu in Metro- Mezzanine. 7.2.9 Type 8 - REQUIRED set/edit: [B] Task Type [F] Menu File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [J] Menu Prompt {+} This is a very important Task Type: the Menu Task Type. With this Task Type, you can designate the current menu to display to the user. In Section 6.1.4 (for registered users), you specified a new Task for the Initial Menu Task or merely left the default as-is. In either case, that Initial Menu Task tells Metro-Mezzanine to display the prescribed text file to the user as a menu screen. Thereafter, if the user accesses a Type 8 Task (a Menu Task), he/she is displayed the new menu screen associated with that Menu Task until, once again, he/she accesses another Menu Task. In this way, the current menu is always shown. 7.2.9.1 Super-global-humongous-power jumping - As you may have noticed, every Task has a unique key... there cannot be two J.TSK files (for a "J" command). Is this significant? YES! There is a special feature in Metro-Mezzanine that allows users to type in a command that exists ANYWHERE in Metro-Mezzanine and immediately access that Task, instead of wading through any number of menu screens that you may have designed. This is the DevExpressWay(tm) feature. DevExpressWay(tm) is especially good for callers who use scripts to access your metronet: if they are long distance callers, and they need to access your system to fetch .QWK mail for their own system, for instance, being able to quickly access the appropriate Task without wasting time on the menu screens. Also, it cuts down dramatically on the complexity of such automated scripts, reducing the room for error and even higher phone bills (as the caller attempts to figure out what went wrong and to fix it). It is up to you to decide whether to inform your users about the DevExpressWay(tm) feature or not. I personally believe it to be a very important and useful feature that all users should be aware of. 7.2.10 Type 9 - REQUIRED set/edit: [B] Task Type [D] Text File Name {+} [G] Bulletin Common Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} [J] Menu Prompt {+} Type 9 allows you to set up a bulletin menu subsystem, very much in the same manner as those appearing on full-blown BBS packages. You need to specify the text filename to be used as a selection menu for the bulletins, and then you need to specify the generic filename for all of the bulletin text files. What exactly is the generic filename for the bulletin text files? The filename specifier itself SHOULD be less than eight characters long (the shorter the better), but the path specifier can point to any legitimate storage space on your system, ie. even if your Metro-Mezzanine setup is located in H:\MEZZ, you can use D:\BLTS\INFO as the generic filename for the bulletin text files. Using the example above, INFO is the filename specifier. With this specifier, you can have the filenames fit the following paradigm: INFOxxxx.ggg where "xxxx" are any four alphanumeric characters and any other characters which are valid in a DOS filename, and "ggg" is either .ASC (for an ASCII file) or .ANS (for ANSI). In your bulletin selection menu file, you will list all of the keys to access the bulletin files, namely those very same xxxx parameters that you used in the bulletin filenames. It's that simple! (Many of you probably have experience with QuickBBS, RemoteAccess, PCBoard, and other BBS programs employing similar methods for bulletin menu displaying, so this should not be a shock to you!) 7.2.11 Type 10 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} Type 10 is a quick and dirty logoff option, to allow your users to basically disconnect themselves from your Metro- Mezzanine setup. Metro-Mezzanine will first drop DTR, wait about one second, then bring DTR back up. After that, it will immediately exit to the specified errorlevel (usually returning control to your front-end program). 7.2.12 Type 11 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} Type 11 is similar to Type 10, but instead of hanging up immediately, it allows for the display of a text file prior to hanging up, so that you can impart some useful (or trivial) information to your users, as a sort of Parthian shot. 7.2.13 Type 12 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} Type 12 resembles Type 11; however, instead of rushing straight through the text file display and then hanging up, Type 12 allows for a pause in the form of a request to hit the <RETURN> key before proceeding to hang-up. This gives your users a momentary breather while reading your text file information. 7.2.14 Type 13 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} Type 13 resembles Type 12, but it adds even more complexity by introducing a simple Y/N question directly after showing the text file, asking the user if he/she really wants to logoff your Metro-Mezzanine setup. If he/she decides not to leave, he/she is returned to the main menu that you set. Else, he/she is logged off the system. 7.2.15 Type 14 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Type 14 is identical to Type 2 except that instead of requesting a password BEFORE showing the text file, the text file is shown first, followed by the password request. This way, you can present some useful information to the user before checking on whether the user has the appropriate security password to access the Task. If the security password feature is not used, Type 14 can be used interchangeably with Type 2. 7.2.16 Type 15 - REQUIRED set/edit: [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [H] Exiting String {+} [I] Task Password {+} Type 15 is identical to Type 6 except that the password request occurs AFTER the Y/N query instead of immediately after accessing the Task. Like Type 14, Type 15 allows you to display some information to the user prior to verifying that access is desired and that the user has the appropriate security password. If the security password feature is not used, Type 15 can be used interchangeably with Type 6. 7.2.17 Type 16 - REQUIRED set/edit: [B] Task Type [D] Text File Name {+} [E] Download File Name {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} OPTIONAL set/edit: [A] Task Name [I] Task Password {+} Type 16 is identical to Type 7 except that the password request occurs AFTER the Y/N query instead of immediately after accessing the Task. Like Types 14 and 15, Type 16 allows you to display some information to the user prior to verifying that access is desired and that the user has the appropriate security password. If the security password feature is not used, Type 16 can be used interchangeably with Type 7. 7.3 Task Information Display - When you create a new Task or edit an existing one, you are shown a screen which resembles the following: Task DATA\welcome.TSK Information [A] Task Name : Welcome/News Screen [B] Task Type : 3 [C] Exits on Errorlevel : 255 [D] Text File Name : welcome [E] Download File Name : NONE [F] Menu File Name : MAIN [G] Bulletin Common Name : NONE [H] Exiting String : Accessing... [I] Task Password : NONE [J] Menu Prompt : [M-M IV]: [K] ANSI/ASCII Toggle : ANSI+ASCII [L] Display Pause : Yes [Q]UIT Edit which? : The above is the screen displayed for the default WELCOME Task. Obviously, the information shown will vary with each Task, and there is also a default set used whenever you create a new Task. Here is a summary of the options available when editing a Task: [A] Task Name [B] Task Type [C] Exits on Errorlevel [D] Text File Name {+} [E] Download File Name {+} [F] Menu File Name {+} [G] Bulletin Common Name {+} [H] Exiting String {+} [I] Task Password {+} [J] Menu Prompt {+} [K] ANSI/ASCII Toggle {+} [L] Display Pause {+} [Q]UIT Here is a detailed discussion concerning these editing options: 7.3.1 Task Name - =-= Optional =-= You can give the Task a description so that it will be listed with the useful information whenever you flip through the list of existing Tasks in your Metro-Mezzanine setup when you pick the option to add/edit/delete Tasks within MezSetup. 7.3.2 Task Type - =-= For all Tasks =-= The Task Type is the specifier you issue to Metro-Mezzanine so it understands exactly what to do when a user types in the command for that Task. See Section 7.2 about Task Types. The WELCOME and MAIN Tasks are special reserved Tasks, so unregistered users should NOT change the Task Type for the WELCOME or MAIN Tasks! 7.3.3 Exits on Errorlevel - =-= For Task Types: 1, 2, 6 =-= For those Task Types which require an errorlevel, this is where you have the opportunity to enter it. This is the errorlevel value that you must check for in your BBS batch file that runs Metro-Mezzanine. See Section 6.2 for more details on this. Note that you cannot assign any errorlevels between 1 and 9 inclusive, but 0 is a valid choice. 7.3.4 Text File Name {+} - =-= For Task Types: 2, 3, 4, 6, 7, 9 =-= This allows you to set the filename needed for displaying text files within Task Types that use this information. Remember that you can supply both ASCII and ANSI equivalents. 7.3.5 Download File Name {+} - =-= For Task Types: 5, 7 =-= This allows you to set the filename which specifies the file that you wish the user to download. 7.3.6 Menu File Name {+} - =-= For Task Types: 8 =-= The menu file is actually an ASCII/ANSI text file that you get to specify as the menu screen for a Menu Task. See Section 7.2.9 for more information about Menu Tasks. 7.3.7 Bulletin Common Name {+} - =-= For Task Types: 9 =-= When using a Bulletin Task, this is where you have the opportunity to enter the generic file specifier for the bulletin files. See Section 7.2.10 for more information about Bulletin Tasks. 7.3.8 Exiting String {+} - =-= For Task Types: 1, 2, 6 =-= Generally speaking, this option is also considered whenever a Task allows for exiting Metro-Mezzanine with an errorlevel. This a one-line text string that you can have displayed to the callers. This is especially useful as an introductory sentence that prepares the caller for the transition from Metro-Mezzanine to the program that you have specified in your BBS batch file. 7.3.9 Task Password {+} - =-= For Task Types: 1, 2, 3, 4, 5, 6, 7, 8, 9 =-= The ability to safeguard Tasks with security passwords enables you to provide services to some callers and not to others. You can disciminate between regular callers and other BBS's calling in to perform .QWK mail transfers, for instance. Or, if you are a software developer and need your beta testers to access a secure BBS partition that you have set up, you can use this feature to prevent unwanted callers from making a mess of everything. Also, you can have special text file displays protected with passwords for the eyes of certain people only. A very useful feature which I highly recommend for the security-minded. 7.3.10 Menu Prompt {+} - =-= For Task Types: 8, 9 =-= This allows you to specify individual customized command prompts at the various Menu and Bulletin Tasks that you create. 7.3.11 ANSI/ASCII Toggle {+} - =-= For Task Types: 2, 3, 4, 6, 7, 9 =-= Use this to toggle between detection for ASCII text files only, or for both ANSI and ASCII file availability. If a caller decides that he/she wishes to see ANSI and your system supports it, then having this toggle set for ASCII+ANSI will allow him/her to see your .ANS files if they are available in the Tasks that you have created. 7.3.12 Display Pause {+} - =-= For Task Types: 2, 3, 4, 6, 7, 9 =-= If you include long text files in your Tasks, and if you wish to have your callers see all of them without having a coronary attack from attempting to keep up with warp-speed text scrolling (in the case of 9600+ setups), then setting this toggle to YES will solve that dilemma. NOTE: if you are using extensive ANSI screens, then make sure this is set to NO unless you claim to know what you are doing. 7.4 Note About Extraneous Information - If you enter information for a Task that the Task does not use, that information is just ignored. For instance, if you entered an errorlevel and a filename for a Type 1 Task, you know that the filename will be ignored because Type 1 Tasks are standard exits using an errorlevel. However, if you neglect to enter an errorlevel, your setup may act "funny". On the other hand, you may have deliberately entered the filename for the Type 1, with the purpose of later changing the Task from a Type 1 Task to a Type 2 task, which DOES use the filename to display a text file to the user. ----------------------------------------------------------------------------- 8.0 PRODUCT SUPPORT To maintain his position as one of the most accessible shareware author, the information following has been provided: Address: Steven H. Lin, Ph.D., M.S. DevPal MetroNet Communications 1251 NE 108th St., #621 Miami, FL 33161 BBS: [The Deviant's Palace] of Miami 305/899-1841 2400-14.4k HST/v.32bis 24 hours except ZMH Voice: 305/899-0957 FN NetMail: FN 1:135/105.0 EN 50:5305/505.0 DN 55:55/1.0 DR 75:75/1.0 Internet: slinc@f135.n105.z1.fidonet.org FN EchoMail: AOTD - DevOnline Products echo [DN/DR/FN] DEV_SYSOP - DevNet Systems Operations echo [DN/FN] DEV_TPA - Third Party Apps Developers echo [DN/FN] DOORGAMES - DOOR Games Discussions echo [FN] DOORWARE - DOORware echo [RN/FN] D_UTIL - DOOR Utilities echo [DR] PCBNET - PCBoard Sysops echo [FN] RA_UTIL - RemoteAccess Utilities echo [FN] U'NI-net/US: DOOR-UTIL - DOORs and utilities for BBS's VirtualNet: 1 @3053 2 @3053 Voice support is given freely and is the preferred method of communication by the author. Please take advantage of this remarkable avenue of support. To further expand accessibility, there are now official DevOnline distribution sites available to provide you with the latest unregistered versions of DevOnline products: DevOnCO (Mountain US) : The Hornet's Nest sysop: Kevin Higgins loc: Fort Carson, CO #: 719/579-0593 baud: 2400-14.4k HST ice: TAG addr: FN 1:128/74.0, VN 45:521/101.0 PCP: n/a DevOnFL (Eastern US) : [The Deviant's Palace] of Miami sysop: Steve Lin loc: Miami, FL #: 305/899-1841 baud: 2400-14.4k HST/v.32bis ice: Maximus-CBCS, PCBoard, QuickBBS, RemoteAccess, WWIV-IMS, Virtual BBS, Waffle/DOS addr: FN 1:135/105.0, EN 50:5305/505.0, DN 55:55/1.0, UN DEVPAL, VtN @3053 PCP: FLMIA DevOnTX (Southern US) : The Chess Board sysop: Ken Givens loc: Grand Prairie, TX #: 214/641-1136 baud: 2400-14.4k HST ice: SuperBBS addr: FN 1:1/132.0, FN 1:124/2213.0, 43:1370/101.0 PCP: TXDAL DevOnVA (Mid-Atlantic US) : The NEOCOM Game Connection sysop: David Fife loc: Martinsville, VA #: 703/638-1952 baud: 2400-14.4k HST/9600 v.32 ice: RemoteAccess addr: FN 1:264/615.0, DR 75:100/1.0 PCP: n/a ----------------------------------------------------------------------------- 9.0 ACKNOWLEDGEMENTS All products mentioned in this text that are not produced by members of DevPal MetroNet Communications, Inc. are trademarks of their respective copyright holders and/or authors. 9.1 Dedication - This program is dedicated to Wuu Shyong Lin, for having struggled so long against insurmountable odds for his entire life and for sacrificing everything he possessed and everything he was for his family. Rest gracefully in peace. 9.2 And special thanks to (in alphabetical order)... Michael Altschul, Ph.D. Rickie Belitz & DCIS Cam N. DeBuck Gene de Libero Ken Givens & The Chess Board Bonnie Hartstein & DevPalAnA Corinna Harney & DevPalLV Norm Henke & PC-OHIO John Hicks Kevin Higgins & The Hornet's Nest Sil Horwitz Bruce Ikenaga, Ph.D. Elaine Irwin Mary Lambert Bob Mahoney & EXEC-PC Fred Maximilien Omen Technology, Inc. PKWARE, Inc. Herb Ritts Mike Stewart, Ph.D., M.S. & DPBerk John Theed Alejandra Torriano & DevPalDC Ian Wells & TSanc Kari Wuhrer ... and to all of the very special sysops who picked up a copy of Metro-Mezzanine 9.3 Product Acknowledgements - PCBoard, by Clark Development Company QuickBBS, by Steve Gabrilowitz and Richard Creighton RemoteAccess, by Andrew Milner ----------------------------------------------------------------------------- 10.0 FINAL WORDS Metro-Mezzanine has a long way to go, in my opinion. It is not actually one product, but rather a series of similar products geared toward facilitating the access of BBS programs. No longer is a BBS program by itself considered enough. Today's BBS's must have utility programs which enhance the its performance many times over. Metro-Mezzanine fills a gap in an area which has very few other comparable utilities; and Metro-Mezzanine, unlike its competitors, is versatile and flexible enough to be used in more than a single role. Until the advent of Metro-Mezzanine, there were generally considered to be only EIGHT programs which acted as BBS carousels. One of them was Ghostwheel and thus unavailable to the public and, anyways, it was over three megabytes in size and required the concurrent setup of MS-DOS and UNIX/386; two others were not actually programs... they were clever but difficult-to-manage and problematic ways to manipulate batch files and certainly not very comfortable nor reliable for sysops; another was a way of fooling a certain mailer's own external mail routines to think the incoming caller was a mail run, and thus offered very little in the way of amenities or security; two were actually optional menus configured into BBS programs but were not robust enough to handle all callers faultlessly and were not flexible enough to be used to handle situations except as user screening devices; the author of another disappeared a short time after his product was released; and the last one was extremely overpriced for the limited features it offered and its author also vanished abruptly. Metro-Mezzanine represents the first true attempt to provide a versatile pre-BBS and/or inter-BBS interface robust enough for handling many different situations. Feel free to experiment. Metro-Mezzanine was not developed for sysops who like to have bland, monotonous systems: it was meant for the enterprising, inspired sysops who believe that they have something special to offer to others. It is the pioneering spirit of Modemland that Metro-Mezzanine caters to, not the evils of stagnation. Happy designing! - Steven H. Lin, Ph.D., M.S. ----------------------------------------------------------------------------- METRO-MEZZANINE, Type IV Registration Form 4F - Version 4.42 DevOnline Product MEZZ-X4 Sysop Name _________________________________________________________________ BBS Name ___________________________________________________________________ BBS Phone Number ___________________________________________________________ BBS City, State ____________________________________________________________ Sysop's Address ____________________________________________________________ (no P.O. Boxes) ____________________________________________________________ ____________________________________________________________ Sysop's Voice Phone Number(s) ______________________________________________ ____________________________________________________________________________ Any Mail Network Addresses _________________________________________________ ____________________________________________________________________________ Indicate which registration option(s) you'd like by CIRCLING the correct number(s) below: #1 - Non-commercial registration [$20.00 US] #2 - Commercial registration [$35.00 US] #3 - Normal USER status on DevPal [FREE] \ #4 - One year standard registration on DevPal [$8.00] > pick one #5 - One year preferred registration on DevPal [$12.00] / #6 - Consideration for beta test site [FREE] #7 - USPS mail delivery of disk (see below) [$5.00] OPTIONAL Total cost: ___________________________ Your System Hardware (be specific!)_________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ Your BBS Software (be specific!)____________________________________________ ____________________________________________________________________________ Registered Key Delivery: _____ via File Attach (a la FidoNet) _____ I prefer maximum security... Hold my copy on DevPalMiami so I can d/l it myself. Name the M-M reg. key file __________________________ and encrypt it with the password ___________ and put the file in the DevOnline file area on NightVeil PCBoard BBS partition! _____ Send my copy to me by mail. I understand that I will pay US $5.00 for S&H if I am in the U.S. and US $10.00 for S&H if I am out- side the U.S. Signature ___________________________________ Birthdate ____________________