home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Media Gallery 1996 January
/
MG_0196.ISO
/
spea
/
install
/
vega
/
os2
/
clinst21.txt
< prev
next >
Wrap
Text File
|
1993-08-20
|
3KB
|
77 lines
INSTALLATION GUIDE FOR OS/2 2.1 256 COLORS BLITTER DRIVER
FOR CIRRUS LOGIC'S GD542X CHIPS
--------------------------------------------------------------------------
Install from floppy diskette:
-----------------------------
1. insert display driver disk one (labelled DISP 1) in a floppy drive
2. invoke an OS/2 window session or an OS/2 full screen session
3. change to the floppy drive with the display driver disk, e.g. a:
4. run clinst21.cmd from the floppy drive, e.g. clinst21 c
5. check the 'Primary Display' check box from the DISPLAY DRIVER INSTALL
dialog box
6. select Cirrus Logic Blitter Driver from the PRIMARY DISPLAY ADAPTER TYPE
dialog box
7. click OK to MONITOR CONFIGURATION/SELECTION UTILITY dialog box or
type c:\utils\clmode.exe m5 after selecting the 'Install Using
Display Adapter Utility Program' option
8. select the display resolution of choice from the SELECT DISPLAY RESOLUTION
list box
9. click the 'Install' button in the SOURCE DIRECTORY dialog box and follow
prompts
Note: During installation, the target file may have a newer date than the
source file, select the 'Yes' button when the installation program display
a dialog box to notify the user of this situation.
Install from the hard drive:
----------------------------
1. xcopy display driver disk one to the hard drive, target directory
must be named DISP_1, e.g. xcopy a: c:\disp_1
2. invoke an OS/2 window session or an OS/2 full screen session
3. change to \disp_1 directory, run clinst21.cmd, e.g. clinst21 c
4. check the 'Primary Display' check box from the DISPLAY DRIVER INSTALL
dialog box
5. select Cirrus Logic Blitter Driver from PRIMARY DISPLAY ADAPTER TYPE
dialog box
6. click OK to MONITOR CONFIGURATION/SELECTION UTILITY dialog box or
type c:\utils\clmode.exe m5 after selecting the 'Install Using
Display Adapter Utility Program' option
7. select the display resolution of choice from the SELECT DISPLAY RESOLUTION
list box
8. click the 'Change' button in the SOURCE DIRECTORY dialog box, type
c:\disp_1 in edit box and follow prompts
Note: During installation, the target file may have a newer date than the
source, select the YES button when the installation program display a
dialog box to notify the user of this situation.
Additional notes:
-----------------
dspinstl.exe calls svga.exe to identify the SVGA chip before proceeding with
installation. The svga.exe shipped with OS/2 2.1 does not recognize GD5428.
clinst21.cmd will update svga.exe before calling dspinstl.exe so that GD5428
will be identified. Subsequent installation of Cirrus display drivers or
modification of display resolutions can be performed using the dspinstl.exe
directly.