home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Media Gallery 1996 January
/
MG_0196.ISO
/
spea
/
install
/
vega
/
os2
/
clinst20.txt
< prev
next >
Wrap
Text File
|
1993-08-20
|
2KB
|
39 lines
INSTALLATION GUIDE FOR OS/2 2.0 32-Bit 256 COLORS BLITTER DRIVER
AND 16 COLORS NON-BLITTER DRIVER
FOR CIRRUS LOGIC'S GD542X CHIPS
--------------------------------------------------------------------------
Installing the 256 colors blitter driver:
-----------------------------------------
1. Edit OS/2's config.sys file with the following settings
set video_devices=vio_SVGA
set vio_SVGA=device(bvhvga,BVHSVGA)
device=%1:\os2\mdos\VSVGA.SYS
2. Bring up a DOS full screen session, run Clmode utility to set monitor type,
then insert Cirrus Logic's driver diskette in drive A or B,
type A:SVGA.EXE ON or B:SVGA.EXE ON to create a svgadata.pmi file
3. Shutdown the system to boot up from the OS/2 2.0 Installation
Diskette, then ESC out of Diskette One to run cli25620.cmd
Installing the 16 colors non-blitter driver:
--------------------------------------------
1. Edit OS/2's config.sys file with the following settings.
add %1:\OS2\DLL\CLDSP; to the immediate right of LIBPATH=
set video_devices=vio_SVGA
set vio_SVGA=device(bvhvga,BVHSVGA)
device=%1:\os2\mdos\VSVGA.SYS
2. Bring up a DOS full screen session, run Clmode utility to set monitor type,
then insert Cirrus Logic's driver diskette in drive A or B,
type A:SVGA.EXE ON or B:SVGA.EXE ON to create a svgadata.pmi file.
3. shutdown the system to boot up from the OS/2 2.0 Installation
Diskette, then ESC out of Diskette One to run cli1620.cmd.