home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Media Gallery 1996 January
/
MG_0196.ISO
/
spea
/
install
/
stplus
/
nt
/
readme.txt
< prev
next >
Wrap
Text File
|
1995-06-01
|
3KB
|
74 lines
╔════════════════════════════════════════════════════════════════════╗
║ ║
║ WindowsNT 3.5 Driver ║
║ ║
║ for ║
║ ║
║ SPEA SHOWTIME PLUS ║
║ ║
║ SPEA Software AG 05/30/95 ║
╚════════════════════════════════════════════════════════════════════╝
Note: This driver is only an accelerated graphic driver without hardware
video support.
This driver supports 640x480 to 1280x1024 resolutions in 256 color mode and
640x480 to 1024x768 in 64k color mode.
Please note that due to the installation method that Microsoft currently has
chosen for the W32, the installation process is not as straightforward as we
would have liked. From the Control Panel display driver installation screen
the user must select the OTHER button (not "Tseng Labs W32" which will be
listed!). If the user selects the "Tseng Labs W32" entry from the Models
dialog box they will not get the Accelerated W32 drivers! Detailed
instructions are given below. After successfully installing and
rebooting the driver and adapter, information can be viewed in the Display
applet by selecting Change Display Type. The new drivers ID string is
"Tseng Labs Accelerated W32". This ID string does not get written to the
Models dialog box so the Other install option must always be used to select
the Accelerated W32 drivers if they are not currently selected.
The installation is straight forward and is described below as well as in the
README.TXT distributed with the drivers.
Install procedure:
- Copy all created files onto floppy.
- Start Win NT
- Select "Other install option" do not select "Tseng Labs W32" entry
from Models list:
- Select Control Panel
- Select Display
- Select Change Display Type
- Select Change
- Select Other
- Enter Selected disk drive or type CD drive letter an path
\SPEA\INSTALL\STPLUS\NT when installing from media gallery
- Select OK
The "Tseng Labs Accelerated W32" is highlighted:
- Select Install
- Select Yes
If you have installed the driver in the past you may select
to use the current drivers at this time. In this case the
driver files will not be copied.
- Enter Path of OEM Display driver files or type CD drive letter
an path \SPEA\INSTALL\STPLUS\NT when installing from media gallery
- Select Continue
The driver files are copied and installed.
- Select OK
- Select OK
- Select Restart Now (to activate drivers)
Changing modes:
- Select Control Panel
- Select Display
- Select List All Modes
- Highlight desired mode
- Select OK
- Select Test
- Select OK
If the bit map is displayed properly
- Select OK
- Select Restart Now (to activate drivers)