home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Media Gallery 1996 January
/
MG_0196.ISO
/
spea
/
install
/
mirp32
/
util
/
readme.eng
< prev
next >
Wrap
Text File
|
1995-11-16
|
11KB
|
236 lines
╔═════════════════════════════════════════════════════════════════╗
║ ║
║ SPEA V7-MIRAGE P-32 README File Rev. 1095.3 ║
║ ═════════════════════════════════════════════ ║
║ ║
║ SPEA Software AG ║
║ ║
╚═════════════════════════════════════════════════════════════════╝
Thank you for purchasing the SPEA V7-MIRAGE P-32 graphic card. We, at
SPEA Software AG, hope that you will enjoy working with our product
and that it will help you and prove to be an efficient tool in your
daily work.
To achieve this goal we have put a lot of effort into making the
installation and use of our product both as user-friendly and self-
explanatory as possible.
IMPORTANT NOTE!
You must IMPERATIVELY read this README file and all the documentation
supplied BEFORE you continue the installation!
Otherwise SPEA cannot accept any responsibility for claims that may be
caused as a consequence.
╔══════════════════════════════════════════════════════════════╗
║ Contents ║
╚══════════════════════════════════════════════════════════════╝
- V7-MIRAGE P-32 Graphic Card : General Remarks
- Windows Driver Installation
- Drivers / Utilities Installation For Other Applications
- Monitor Selection
- Known Limitations
- Software Applications : General Remarks
- corrections to the users manuals
- SPEA Software AG : Support / Service
╔═════════════════════════════════════════════════════════════╗
║ V7-MIRAGE P-32 Graphics board : General Remarks ║
╚═════════════════════════════════════════════════════════════╝
The V7-MIRAGE P-32 graphics card is a product that offers significantly
enhanced features compared to other standard VGA graphic and
accelerator boards.
This particularly applies to
- higher resolutions and
- higher refresh rates.
Please be aware that you can only take full advantage of the
features provided by the V7-MIRAGE P-32, if the other components of
your system, especially the graphic monitor that is being used,
also comply with the specifications of the V7-MIRAGE P-32.
(Example : The resolution 1280x1024 that is supported by the
V7-MIRAGE P-32 can obviously not be used with a monitor that is
specified to only support resolutions up to 1024x768.)
╔═════════════════════════════════════════════════════════════╗
║ Windows Driver Installation ║
╚═════════════════════════════════════════════════════════════╝
For installing the SPEA V7 Windows driver 'BigWin':
Select the menu items 'File' and then 'Run' in the Windows Program
Manager. Then enter:
a) (Drivers for Windows Disk) b) (Media Gallery-CD)
A:\V7SETUP <CD drive>:SPEAINST
╔═════════════════════════════════════════════════════════════╗
║ Drivers / Utilities Installation For Other Applications ║
╚═════════════════════════════════════════════════════════════╝
Usually two major steps are necessary to install the driver(s)
for a specific non windows application.
(1) (Only for floppy disk installation. You have to start the installation
from Media Gallery CD-ROM always with SPEAINST.)
First the driver modules must be copied from the V7-MIRAGE P-32
Superdisk to the hard disk of your system.
This is done by the INSTALL program provided with the V7-MIRAGE P-32
Superdisk.
Before you start INSTALL you should know in which drives and
directories the applications are installed that you want to install
drivers for.
- change to the V7-MIRAGE P-32 Superdisk and call INSTALL,
- select the language you prefer,
- and follow the instructions given by INSTALL.
(2) After the driver modules have been copied to the hard disk, the
applications need to be re-configured for the new drivers. The
User Manual provides detailed descriptions for each application
supported by the V7-MIRAGE P-32.
VESA modes:
The V7-MIRAGE P-32 BIOS of the boards supports the VESA interface directly.
Software such as MS Flight Simulator 5.0 can therefore be run without
loading V7MIPVBE.EXE, however they do run better with the TSR program.
╔═════════════════════════════════════════════════════════════╗
║ Monitor Selection ║
╚═════════════════════════════════════════════════════════════╝
As already mentioned above, the graphic monitor used with the
V7-MIRAGE P-32 must comply to the specifications of the V7-MIRAGE
P-32. Only then can the full functionality of the V7-MIRAGE P-32
be used.
In order to configure your V7-MIRAGE P-32 for your monitor use
the program SPTUNE.
Windows applications are tuned via the V7SETUP configuration program.
*** IMPORTANT ***
Please only select parameters that your monitor is specified for.
Your monitor may be seriously damaged, if it is constantly driven
with parameters which are not within the range of its specification.
If you change your monitor you have to compare the specification
and, if necessary, to change the resolutions / refresh rates using
SPEAtune !
╔═════════════════════════════════════════════════════════════╗
║ Known Limitations ║
╚═════════════════════════════════════════════════════════════╝
(1) It is not possible to use two or more active VGA boards in one PC at
the same time.
In case you want to use the V7-MIRAGE P-32 board in a PC that has a
VGA interface integrated on the motherboard, then this integrated
VGA interface must be disabled before the V7-MIRAGE P-32 may be used.
(2) Some applications such as Windows 3.1, and others offer
"Video 7 ..." display interfaces in their configuration programs.
These options should NOT be selected when using the V7-MIRAGE P-32.
Please follow the instructions given in the user's manual to
guarantee that the optimum configuration for the V7-MIRAGE P-32 is
being installed.
╔═════════════════════════════════════════════════════════════╗
║ Notes on Applications ║
╚═════════════════════════════════════════════════════════════╝
Seperate README files are supplied for most application drivers
available for the V7-MIRAGE P-32. These READMEs contain last-minute
information not included in the printed documentation and infor-
mation related to known limitations.
These README files are copied to the directory \SPEA\GDC when
the related driver has been selected for installation while
running the INSTALL program. The READMEs can be identified by
the file name extension .DOC .
Use the command SHOW *.DOC from the \SPEA\GDC directory to
display the README file on your screen.
EXAMPLE :
----------
C:>CD \SPEA\GDC change to \SPEA\GDC
C:\SPEA\GDC> SHOW ACAD.DOC Show the README file for AutoCAD
╔═════════════════════════════════════════════════════════════╗
║ corrections to the users manuals ║
╚═════════════════════════════════════════════════════════════╝
SPEA V7-MIRAGE P-32 and SPEA ergonomic modes:
=============================================
The V7-MIRAGE P-32 with supports (via the BIOS) all the resolutions
available up to a frequency of 75 Hz. A software solution is available
with SPTUNE to set screen refresh rates up to 100 Hz. An overview of
the frequencies available can be found in the file BIOS.TXT.
Important: SPEA ergonomics modes with frequencies are only active
if the program "V7HFREQ" is loaded with the option "t".
For this reason a corresponding entry is made in your AUTOEXEC.BAT
during the installation routine.
AutoCAD:
========
AutoCAD 11 is not supported by the V7-MIRAGE P-32.
╔═════════════════════════════════════════════════════════════╗
║ SPEA Software AG : Support / Service / Software Updates ║
╚═════════════════════════════════════════════════════════════╝
For technical support on installation, configuration and use of
SPEA graphics boards and multimedia products, SPEA provides the
following software and information in the file- and news-areas
of the online services listed below :
- the most current software and driver versions released by SPEA
for distribution
- technical information, hints and answers to frequently asked
questions, compiled and updated regularly by the staff of the
SPEA SupportTeam
The online services are available 24 hours every day.
- SPEA Mailbox
(Bulletin Board Service): Modem, analog +49 81 51 / 1 29 21
Modem, analog +49 81 51 / 26 62 41
Modem (Zyxel) +49 81 51 / 2 11 96
ISDN +49 81 51 / 7 80 01
- SPEA Forum in Compuserve: GO SPEA
- SPEA in Internet: http://www.vobis.de/bbs/firmen/spea
Software updates and techical support information are also pub-
lished with the
- MediaGallery CD. This CD is being updated on a monthly basis,
and is a supplement distributed with the German PC magazine
"PC Direkt".
Individual technical support by telephone is available at the
- SPEA ExpertLine Phone 01 90 / 51 24 28
(DM 1,15/minute; SPEA Software AG)
This service is available within
Germany only)
More detailed information on how to access the SPEA Mailbox may
be found in the readme-file MAILBOX.DOC. To read this file,
type:
CD \SPEA\GDC
SHOW MAILBOX.DOC
╔═════════════════════════════════════════════════════════════╗
║ End of README - Press [ESC] ║
╚═════════════════════════════════════════════════════════════╝