home *** CD-ROM | disk | FTP | other *** search
/ Media Gallery 1996 January / MG_0196.ISO / spea / install / mirp32 / os2 / readme.eng < prev    next >
Text File  |  1995-11-17  |  4KB  |  108 lines

  1.         ╔═══════════════════════════════════════════════════════╗
  2.         ║                      V7-MIRAGE P-32                   ║
  3.         ║                BigBlue Driver        v2.09            ║
  4.         ║                V7SETOS2              v1.23            ║
  5.         ║                                                       ║
  6.         ║                      for OS/2 Warp                    ║
  7.         ║                                                       ║
  8.         ║                             (c)1995, SPEA Software AG ║
  9.         ╚═══════════════════════════════════════════════════════╝
  10.  
  11.  
  12. This README file contains the following information:
  13.            A) Properties of the Drivers
  14.            B) Requirements for Installation
  15.            E) Installation of the OS/2 Drivers
  16.            D) Changing the resolution under OS/2 or Win-OS/2
  17.            E) Known Restrictions
  18.  
  19.  
  20. A) Properties of the Driver
  21. ===========================
  22.    This driver supports the following resolutions and color depth in the
  23.    OS/2 Workplace Shell:
  24.       640 * 480  * 256 Farben
  25.       800 * 600  * 256 Farben
  26.      1024 * 768  * 256 Farben
  27.      1152 * 870  * 256 Farben
  28.       640 * 480  * 64k Farben
  29.       800 * 600  * 64k Farben
  30.       640 * 480  * 16M Farben (*)
  31.  
  32.   (*)  In these resolutions Seamless Windows is not supported.
  33.  
  34.    The BigWin driver can be installed in the Windows Session in all available
  35.    resolutions and also with color depth higher than 256 colors.
  36.    Also if the BigWin is configured in another resolution than the OS/2
  37.    environment it is possible to switch between both surfaces without
  38.    any problems.
  39.  
  40. C) Requirements for Installation
  41. ================================
  42.    OS/2 has to be installed and runs with standard VGA driver or and older
  43.    BigBlue driver with the V7-MIRAGE P-32 board in the OS/2 environment as
  44.    well.
  45.    Note: You need the V7-MIRAGE P-32 "Drivers for Windows" Disk for the
  46.    installation.
  47.  
  48.  
  49. D) Installation of the OS/2 Drivers
  50. ===================================
  51. 1. (Only when drivers are downloaded from mailbox)
  52.    Extract the files to an 1.44MB floppy a name this disk "V7-MIRAGE P-32
  53.    BigBlue".
  54.    A disk label is NOT necessary any longer.
  55.  
  56. 2. Start OS/2.
  57.    Important: before beginning the installation shut down any running
  58.    OS/2 and Windows programs!
  59.    Open a fullscreen session or an OS/2 window. Put the disk labelled
  60.    "V7-MIRAGE P-32 BigBlue" in drive A: and enter:
  61.       A:\V7SETOS2
  62.    (Only for floppy disk installation, does not apply to CD ROM install.)
  63.    Follow the instructions on the screen and if unsure at any point,
  64.    call the online help.
  65.  
  66.    After terminating the program and restarting OS/2 you have access to
  67.    the OS/2 desktop and seamless Windows with the BigBlue driver and
  68.    to Windows via the BigWin driver in the resolution and color depth
  69.    that you selected.
  70.  
  71.  
  72. E) Changing the resolution under OS/2 or Win-OS/2
  73. =================================================
  74. After you have installed BigBlue a new folder named "SPEA/V7" will be
  75. created on your desktop with the V7SETOS2 program icon. After starting
  76. this program you can change the resolution or color depth before restarting
  77. your system to initialize the changes.
  78.  
  79. Note the following if you wish to use a different resolution under Win-OS/2
  80. as opposed to the OS/2 desktop.
  81. 1. Deactivate the checkbox 'Use settings in Win-OS/2 fullscreen session'.
  82. 2. Start Win-OS/2. Select the options 'File' and 'Run' in the Program
  83.    Manager. Then enter V7SETUP' without a path or drive. After starting
  84.    the program make the changes for your Win-OS/2 session in the same
  85.    way as under V7SETOS2.
  86.  
  87.    Note: V7SETUP for Windows can't be started as a seamless window
  88.    application.
  89.  
  90. F) Known Restrictions
  91. =====================
  92. Videoplayer:
  93.    If you change to a fullscreen session whilst running a video then text
  94.    will be displayed in black on blak. Switching from digital video to
  95.    fullscreen windows can cause the system to crash.
  96.  
  97. SPtune:
  98.    User modes (tuned modes) are currently not supported. They are not shown
  99.    in V7SETOS2 but are used and running if set under SPtune.
  100.  
  101. SPEAview:
  102.    SPEAview should not be used under Win-OS2.
  103.  
  104.  
  105.   ╔═════════════════════════════════════════════════════════════╗
  106.   ║                End of README  -  Press [Esc]                ║
  107.   ╚═════════════════════════════════════════════════════════════╝
  108.