/* BOARD DEFINITION BY USER IF NOT PREDEFINED, FOR EXAMPLE CASE "TOOLS": */
@If ((@TypeofDist == 200) && (@BoardIDS == 0))
@GetOption
@If (@IL == 1) For which graphics board do you want to install @Name ? @ElseIf (@IL == 2) Für welche Graphikkarte wollen Sie @Name installieren ? @ElseIf (@IL == 3) Pour quelle carte graphique voulez-vous installer @Name ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list. @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten zur Positionierung in der Liste. @ElseIf (@IL == 3) Employez les touches fléchées pour se deplacer dans la liste. @Endif
@If (@IL == 1) Press the RETURN key to make your selection. @ElseIf (@IL == 2) Bestätigen Sie Ihre Wahl mit der RETURN-Taste. @ElseIf (@IL == 3) Validez votre sélection avec <ENTREE>. @Endif
@Option 5 = "SPEA Painter / Gallery" /* */
@Option 6 = "SPEA Flash1" /* */
@EndOption
@Endif
IDSdefined:
@DefineVars
/* SET ENVIRONMENT DEFAULTS: */
@Drive @ACADdrive = C @Dir @ACADdir = "\\ACAD\\DRV\\"
@Drive @USTdrive = C @Dir @USTdir = "\\USTATION\\"
@Drive @POILdrive = C @Dir @POILdir = "\\PL\\"
@Drive @GCADdrive = C @Dir @GCADdir = "\\CADD6\\"
/* IF BOARD PREDEFINED, NO USER BOARD REDEFINITION: */
@If (@IL == 1) Install @Name on which disk drive ? @ElseIf (@IL == 2) Auf welchem Laufwerk soll @Name installiert werden? @ElseIf (@IL == 3) Sur quelle unité voulez-vous installer @Name? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten um das Laufwerk auszuwählen. @ElseIf (@IL == 3) Utiliser les flèches du curseur pour se déplacer dans la liste des @Endif
@If (@IL == 1) of drives. Press the RETURN key when you have selected a drive. @ElseIf (@IL == 2) Drücken Sie die RETURN Taste, nachdem Sie das Laufwerk gewählt haben. @ElseIf (@IL == 3) unités. Validez l'unité que vous avez sélectionnée avec <ENTREE>. @Endif
@If (@IL == 1) In the following you will be asked which software and drivers you want to @ElseIf (@IL == 2) Nachfolgend werden Sie aufgefordert auszuwählen, welche Software und @ElseIf (@IL == 3) Dans l'étape suivante, vous devrez sélectionner le logiciel et les drivers @Endif
@If (@IL == 1) select for installation. @ElseIf (@IL == 2) Treiber Sie installieren wollen. @ElseIf (@IL == 3) que vous voulez installer. @Endif
@If (@IL == 1) MUST be selected when doing an initial board and software installation. @ElseIf (@IL == 2) MUSS ausgewählt werden, wenn Sie eine Erstinstallation der Hardware und @ElseIf (@IL == 3) <<SPEA @Board logiciel GDC (logiciel de base et utilitaires)>> @Endif
@If (@IL == 1) @ElseIf (@IL == 2) Software durchführen. @ElseIf (@IL == 3) si vous installez la carte et le logiciel pour la première fois. @Endif
@If (@IL == 1) The same is true, if all or parts of this software release are installed @ElseIf (@IL == 2) Dies gilt auch, wenn Teile dieser Software als Update installiert werden. @ElseIf (@IL == 3) Ceci est également vrai, si vous installez cette version de logiciel comme @Endif
@If (@IL == 1) as an update. In this case, the "SPEA @Board GDC Software ..." @ElseIf (@IL == 2) In diesem Fall sollte die "SPEA @Board GDC Software ..." ebenfalls @ElseIf (@IL == 3) mise à jour. @Endif
@If (@IL == 1) should also be selected for installation, to ensure that the most current @ElseIf (@IL == 2) mitinstalliert werden, um sicherzustellen, daß die neueste Version dieser @ElseIf (@IL == 3) Dans ce cas sélectionner aussi <<SPEA @Board logiciel GDC ...>> @Endif
@If (@IL == 1) version of this software (which might be required by other SPEA software) @ElseIf (@IL == 2) Software auf Ihrem System verfügbar ist. @ElseIf (@IL == 3) durant l'installation afin d'être sûr que la version la plus récente de ce @Endif
@If (@IL == 1) is available on your system. @ElseIf (@IL == 2) @ElseIf (@IL == 3) logiciel soit installée dans votre système (ce qui peut être nécessaire @Endif
@If (@IL == 1) @ElseIf (@IL == 2) @ElseIf (@IL == 3) pour plusieurs drivers). @Endif
@Pause @Endif
@EndDisplay
nochmal:
@If (@TypeofDist == @Superdisk)
@GetGroups @Checkbox
@Cls
@If (@IL == 1) Select the @Name to install : @ElseIf (@IL == 2) Wählen Sie aus, welche Teile installiert werden sollen : @ElseIf (@IL == 3) Sélectionnez les logiciels à installer : @Endif
@If (@IL == 1) @Set A = "SPEA BigFocus Driver for AutoCAD 12 & 11 " @ElseIf (@IL == 2) @Set A = "SPEA BigFocus Treiber für AutoCAD 12 & 11 " @ElseIf (@IL == 3) @Set A = "SPEA BigFocus Driver pour AutoCAD 12 & 11 " @Endif /* */
@If (@IL == 1) @Set E = "SPEA ADIREND Driver for 3D Studio 2.0, AutoSHADE & SKETCH " @ElseIf (@IL == 2) @Set E = "SPEA ADIREND Treiber für 3D Studio 2.0, AutoSHADE & SKETCH " @ElseIf (@IL == 3) @Set E = "SPEA ADIREND Driver pour 3D Studio 2.0, AutoSHADE & SKETCH " @Endif /* */
@If (@IL == 1) @Set W = "SPEA Driver for Windows 3.0 & 3.1 " @ElseIf (@IL == 2) @Set W = "SPEA Treiber für Windows 3.0 & 3.1 " @ElseIf (@IL == 3) @Set W = "SPEA Driver pour Windows 3.0 & 3.1 " @Endif /* */
@If (@IL == 1) @Set G = "SPEA Driver for Generic CADD 5 & 6 " @ElseIf (@IL == 2) @Set G = "SPEA Treiber für Generic CADD 5 & 6 " @ElseIf (@IL == 3) @Set G = "SPEA Driver pour Generic CADD 5 & 6 " @Endif /* */
@If (@IL == 1) @Set H = "SPEA Driver for Micro Station 4.0x " @ElseIf (@IL == 2) @Set H = "SPEA Treiber für Micro Station 4.0x " @ElseIf (@IL == 3) @Set H = "SPEA Driver pour Micro Station 4.0x " @Endif /* */
@If (@IL == 1) @Set P = "SPEA Driver for Point Line 7.5 & 8.0 " @ElseIf (@IL == 2) @Set P = "SPEA Treiber für Point Line 7.5 & 8.0 " @ElseIf (@IL == 3) @Set P = "SPEA Driver pour Point Line 7.5 & 8.0 " @Endif /* */
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list. @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten zur Positionierung in der Liste @ElseIf (@IL == 3) Employez les TOUCHES FLÉCHÉES pour se déplacer dans la liste. @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press the @ElseIf (@IL == 2) und schalten Sie mit der Leertaste zwischen JA und NEIN um. @ElseIf (@IL == 3) Employez la BARRE d'ESPACEMENT pour valider votre selection (OUI) @Endif
@If (@IL == 1) RETURN key when finished. @ElseIf (@IL == 2) Bestätigen Sie Ihre Auswahl mit RETURN. @ElseIf (@IL == 3) ou pour modifier l'état indiqué. @Endif
@If (@IL == 1) @ElseIf (@IL == 2) @ElseIf (@IL == 3) Après avoir fini votre sélection, validez avec <ENTREE>. @Endif
@EndGroups
@ElseIf (@TypeofDist == @Tools)
@GetGroups @Checkbox
@Cls
@If (@IL == 1) Select the @Name to install : @ElseIf (@IL == 2) Wählen Sie aus, welche Teile installiert werden sollen : @ElseIf (@IL == 3) Sélectionnez les logiciels à installer : @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list. @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten zur Positionierung in der Liste @ElseIf (@IL == 3) Employez les TOUCHES FLÉCHÉES pour se déplacer dans la liste. @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press the @ElseIf (@IL == 2) und schalten Sie mit der Leertaste zwischen JA und NEIN um. @ElseIf (@IL == 3) Employez la BARRE d'ESPACEMENT pour valider votre selection (OUI) @Endif
@If (@IL == 1) RETURN key when finished. @ElseIf (@IL == 2) Bestätigen Sie Ihre Auswahl mit RETURN. @ElseIf (@IL == 3) ou pour modifier l'état indiqué. @Endif
@If (@IL == 1) @ElseIf (@IL == 2) @ElseIf (@IL == 3) Après avoir fini votre sélection, validez avec <ENTREE>. @Endif
(en ce cas, il faut d'abord réaliser l'installation du logiciel
"SPEA @Board logiciel GDC" qui se trouve sur le
SPEA @Board SUPERDISK actuel @If (@BoardID == 1) @B ), @Else @B de votre carte graphique), @Endif @B
@Endif @B ou vous avez tapé un faux nom de répertoire.
Voulez-vous quand même continuer
à y installer @Name ?
Utilisez la barre d'espacement pour valider OUI/NON et tapez sur [ENTREE].
@Option 13 = ""
@EndOption
@Endif
@Endif
@Endif
@Display
@If (('C' [! @Group) && (13 [! @Option))
@If (@IL == 1) Aborting installation. @ElseIf (@IL == 2) Die Installation wird abgebrochen. @ElseIf (@IL == 3) L'installation va être interrompue. @Endif
@Pause
@Abort
@Endif
@EndDisplay
ACAD:
@If ('A' [= @Group)
@GetOption
@Checkbox
@If (@IL == 1) For which AutoCAD release shall SPEA BigFocus be installed ? @ElseIf (@IL == 2) Für welches Release von AutoCAD soll SPEA BigFocus installiert werden ? @ElseIf (@IL == 3) Pour quel release d'AutoCAD voulez-vous installer SPEA BigFocus ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list. @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten zur Positionierung in der Liste @ElseIf (@IL == 3) Employez les TOUCHES FLÉCHÉES pour se déplacer dans la liste. @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press the @ElseIf (@IL == 2) und schalten Sie mit der Leertaste zwischen JA und NEIN um. @ElseIf (@IL == 3) Employez la BARRE d'ESPACEMENT pour valider votre selection (OUI) @Endif
@If (@IL == 1) RETURN key when finished. @ElseIf (@IL == 2) Bestätigen Sie Ihre Auswahl mit RETURN. @ElseIf (@IL == 3) ou pour modifier l'état indiqué. @Endif
@If (@IL == 1) @ElseIf (@IL == 2) @ElseIf (@IL == 3) Après avoir fini votre sélection, validez avec <ENTREE>. @Endif
@If (@IL == 1) Which language version of AutoCAD is being used ? @ElseIf (@IL == 2) Welche Sprachversion von AutoCAD wird verwendet ? @ElseIf (@IL == 3) En quelle langue allez-vous utiliser AutoCAD ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list. @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten zur Positionierung in der Liste. @ElseIf (@IL == 3) Employez les touches fléchées pour se deplacer dans la liste. @Endif
@If (@IL == 1) Press the RETURN key to make your selection. @ElseIf (@IL == 2) Bestätigen Sie Ihre Wahl mit der RETURN-Taste. @ElseIf (@IL == 3) Validez votre sélection avec <ENTREE>. @Endif
@If (@IL == 1) @Set y = "English" @ElseIf (@IL == 2) @Set x = "Deutsch " @ElseIf (@IL == 3) @Set z = "Français" @Endif
@If (@IL == 1) @Set x = "German" @ElseIf (@IL == 2) @Set y = "Englisch " @ElseIf (@IL == 3) @Set y = "Anglais " @Endif
@If (@IL == 1) @Set z = "French" @ElseIf (@IL == 2) @Set z = "Französisch" @ElseIf (@IL == 3) @Set x = "Allemand" @Endif
@EndGroups
@If (12 [= @Option)
@GetOutDrive @ACADdrive
@Cls
@If (@IL == 1) On which disk drive is AutoCAD 12 installed on ? @ElseIf (@IL == 2) Auf welchem Laufwerk ist AutoCAD 12 installiert ? @ElseIf (@IL == 3) Sur quelle unité avez-vous installé AutoCAD 12 ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten um das Laufwerk auszuwählen. @ElseIf (@IL == 3) Utiliser les flèches du curseur pour se déplacer dans la liste des @Endif
@If (@IL == 1) of drives. Press the RETURN key when you have selected a drive. @ElseIf (@IL == 2) Drücken Sie die RETURN Taste, nachdem Sie das Laufwerk gewählt haben. @ElseIf (@IL == 3) unités. Validez l'unité que vous avez sélectionnée avec <ENTREE>. @Endif
@EndOutDrive
@GetSubDir @ACADdir
@Cls
@If (@IL == 1) Enter the directory which contains the drivers for AutoCAD 12. @ElseIf (@IL == 2) Welches Verzeichnis enthält die Treiber für AutoCAD 12 ? @ElseIf (@IL == 3) Dans quel répertoire se trouvent les drivers pour AutoCAD 12 ? @Endif
@If (@IL == 1) This directory does not exist. Do you want to create it ? @ElseIf (@IL == 2) Dieses Verzeichnis existiert nicht. Wollen Sie es erzeugen ? @ElseIf (@IL == 3) Ce répertoire n'existe pas. Voulez-vous l'installer ? @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press [RETURN] to continue. @ElseIf (@IL == 2) Drücken Sie die Leertaste, um JA/NEIN zu wählen und anschließend [RETURN]. @ElseIf (@IL == 3) Utilisez la barre d'espacement pour valider OUI/NON et tapez sur [ENTREE]. @Endif
@Option 1301 = ""
@EndOption
@If (1301 [! @Option) @Goto ACAD @Endif
@Endif /* CHECK ENV */
@Endif
@Endif
UST:
@If ('H' [= @Group)
@GetOutDrive @USTdrive
@Cls
@If (@IL == 1) On which disk drive is MicroStation installed on? @ElseIf (@IL == 2) Auf welchem Laufwerk ist MicroStation installiert ? @ElseIf (@IL == 3) Dans quelle unité avez-vous installé MicroStation ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten um das Laufwerk auszuwählen. @ElseIf (@IL == 3) Utiliser les flèches du curseur pour se déplacer dans la liste des @Endif
@If (@IL == 1) of drives. Press the RETURN key when you have selected a drive. @ElseIf (@IL == 2) Drücken Sie die RETURN Taste, nachdem Sie das Laufwerk gewählt haben. @ElseIf (@IL == 3) unités. Validez l'unité que vous avez sélectionnée avec <ENTREE>. @Endif
@If (@IL == 1) This directory does not exist. Do you want to create it ? @ElseIf (@IL == 2) Dieses Verzeichnis existiert nicht. Wollen Sie es erzeugen ? @ElseIf (@IL == 3) Ce répertoire n'existe pas. Voulez-vous l'installer ? @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press [RETURN] to continue. @ElseIf (@IL == 2) Drücken Sie die Leertaste, um JA/NEIN zu wählen und anschließend [RETURN]. @ElseIf (@IL == 3) Utilisez la barre d'espacement pour valider OUI/NON et tapez sur [ENTREE]. @Endif
@Option 1302 = ""
@EndOption
@If (1302 [! @Option) @Goto UST @Endif
@Endif /* CHECK ENV */
@Endif
GCAD:
@If ('G' [= @Group)
@GetOutDrive @GCADdrive
@Cls
@If (@IL == 1) On which disk drive is Generic CADD installed on? @ElseIf (@IL == 2) Auf welchem Laufwerk ist Generic CADD installiert ? @ElseIf (@IL == 3) Dans quelle unité avez-vous installé Generic CADD ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten um das Laufwerk auszuwählen. @ElseIf (@IL == 3) Utiliser les flèches du curseur pour se déplacer dans la liste des @Endif
@If (@IL == 1) of drives. Press the RETURN key when you have selected a drive. @ElseIf (@IL == 2) Drücken Sie die RETURN Taste, nachdem Sie das Laufwerk gewählt haben. @ElseIf (@IL == 3) unités. Validez l'unité que vous avez sélectionnée avec <ENTREE>. @Endif
@If (@IL == 1) This directory does not exist. Do you want to create it ? @ElseIf (@IL == 2) Dieses Verzeichnis existiert nicht. Wollen Sie es erzeugen ? @ElseIf (@IL == 3) Ce répertoire n'existe pas. Voulez-vous l'installer ? @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press [RETURN] to continue. @ElseIf (@IL == 2) Drücken Sie die Leertaste, um JA/NEIN zu wählen und anschließend [RETURN]. @ElseIf (@IL == 3) Utilisez la barre d'espacement pour valider OUI/NON et tapez sur [ENTREE]. @Endif
@Option 1304 = ""
@EndOption
@If (1304 [! @Option) @Goto GCAD @Endif
@Endif /* CHECK ENV */
@Endif
POIL:
@If ('P' [= @Group)
@GetOutDrive @POILdrive
@Cls
@If (@IL == 1) On which disk drive is Point Line installed on? @ElseIf (@IL == 2) Auf welchem Laufwerk ist Point Line installiert ? @ElseIf (@IL == 3) Dans quelle unité avez-vous installé Point Line ? @Endif
@If (@IL == 1) Use the UP and DOWN CURSOR keys to scroll through the list @ElseIf (@IL == 2) Benutzen Sie die Pfeiltasten um das Laufwerk auszuwählen. @ElseIf (@IL == 3) Utiliser les flèches du curseur pour se déplacer dans la liste des @Endif
@If (@IL == 1) of drives. Press the RETURN key when you have selected a drive. @ElseIf (@IL == 2) Drücken Sie die RETURN Taste, nachdem Sie das Laufwerk gewählt haben. @ElseIf (@IL == 3) unités. Validez l'unité que vous avez sélectionnée avec <ENTREE>. @Endif
@EndOutDrive
@GetSubdir @POILdir
@Cls
@If (@IL == 1) @Prompt = "Which directory contains Point Line ([Enter] = @POILdir)?" @ElseIf (@IL == 2) @Prompt = "Welches Unterverzeichnis enthält Point Line ([RETURN] = @POILdir)?" @ElseIf (@IL == 3) @Prompt = "Dans quel répertoire se trouve Point Line ([ENTREE] = @POILdir)?" @Endif
@EndSubdir
/* CHECK ENVIRONMENT OF SELECTED PARTS: */
@If (@Exists "@POILdrive:@POILdir") @Else
@GetOption @Checkbox @LocalWindow (15, 39)
@If (@IL == 1) This directory does not exist. Do you want to create it ? @ElseIf (@IL == 2) Dieses Verzeichnis existiert nicht. Wollen Sie es erzeugen ? @ElseIf (@IL == 3) Ce répertoire n'existe pas. Voulez-vous l'installer ? @Endif
@If (@IL == 1) Use the SPACE bar to toggle the YES/NO state. Press [RETURN] to continue. @ElseIf (@IL == 2) Drücken Sie die Leertaste, um JA/NEIN zu wählen und anschließend [RETURN]. @ElseIf (@IL == 3) Utilisez la barre d'espacement pour valider OUI/NON et tapez sur [ENTREE]. @Endif
@Option 1305 = ""
@EndOption
@If (1305 [! @Option) @Goto POIL @Endif
@Endif /* CHECK ENV */
@Endif
/* KEIN AUFRUF WININST:
@If ('W' [= @Group)
@Display
@If (@IL == 1) The SPEA drivers for Windows 3.0 / 3.1 @ElseIf (@IL == 2) Die SPEA Treiber für Windows 3.0 / 3.1 @ElseIf (@IL == 3) Les drivers SPEA pour Windows 3.0 / 3.1 @Endif
@If (@IL == 1) will be copied to @OutDrive:@SubDir. @ElseIf (@IL == 2) werden nach @OutDrive:@SubDir kopiert. @ElseIf (@IL == 3) seront copiés vers @OutDrive:@SubDir. @Endif
@If (@IL == 1) For configuration, call the following batchfiles: @ElseIf (@IL == 2) Rufen Sie zur Konfiguration folgende Stapeldateien auf: @ElseIf (@IL == 3) Pour configurer, appelez les fichiers de lancement suivants: @Endif