home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magazyn Amiga Shareware Floppies
/
map3.dms
/
map3.adf
/
CPU-Control
/
CPU-Control.doc
< prev
next >
Wrap
Text File
|
1993-06-13
|
10KB
|
214 lines
--------------------------------------------------------------------------
CPU-Control 1.6 (27-Oct-92)
--------------------------------------------------------------------------
CPU-Control is a CPU-like utility for Kickstart/WB 2.0 including a GUI.
The main difference to other tools of this kind is, that CPU-Control
recognizes external changes of any of its parameters. Because of this
special feature it needs some CPU-Time (not much), but in iconified state
it needs no processor time at all. Additionally CPU-Control allows moving
VBR (VectorBaseRegister) to Fast-RAM, which significantly speeds up all
Traps/Interupts. Many CLI Options have been included to allow usage in
scripts, so it's a good idea to put "CPU-Control vbr nw" in your Startup-
Sequence.
--------------------------------------------------------------------------
Requirements
--------------------------------------------------------------------------
Amiga-OS 2.04 or higher is required to run CPU-Control.
--------------------------------------------------------------------------
CLI Usage
--------------------------------------------------------------------------
Parameter Shortform Effect CPU needed
--------------------------------------------------------------------------
(none) just starts CPU-Control
ICACHE I enable Instruction Cache 68020+
NOICACHE NI disable Instruction Cache 68020+
DCACHE D enable Data Cache 68030+
NODCACHE ND disable Data Cache 68030+
IBURST IB enable Instruction Burst 68030
NOIBURST NIB disable Instruction Burst 68030
DBURST DB enable Data Burst 68030
NODBURST NDB disable Data Burst 68030
VBR move VBR to FastRAM 68010+
NOVBR normal VBR (Zero) 68010+
COPYBACK CB enable Copyback 68040
NOCOPYBACK NCB disable Copyback 68040
MMU enable FastROM/SafeKick | 68020/851 |
NOMMU disable FastROM/SafeKick | or 68030 |
MOVESSP SSP move SSP to FastRAM
VERBOSE V Verbose output
CHECK check for a specified processor
(68010/68020/68030/68040/68881/68882/FPU/MMU)
ICONIFY IC starts iconified
NOWIN NW starts without GUI
SYSTEMINFO SI displays some information about your system
CCI Chip-Cache-Inhibit (see update notes)
Example: CPU-Control I D IB NDB VBR SSP MMU V NW
enables all Caches, enables IBurst, disables DBurst, moves VBR
and SSP to FastMem, enables the MMU (FastROM or SafeKick) and
prints the new status verbosely without opening the GUI.
--------------------------------------------------------------------------
Technical Info
--------------------------------------------------------------------------
CPU-Control has been developed using HiSoft's wonderful DevPac 3.02. The
GUI was designed using GadToolsBox 1.3, but the code was so bad, that I
decided to rewrite it.
All cache manipulations are done using Exec's CacheControl, VBR movement
is done by allocating 1024 Bytes of memory using AllocMem, copying the
area, and then setting the VBR register to the new value. Enforcer would
complain about this, but you can simply ignore it. Just for safety the
routine in embedded in Forbid/Permit, and Caches are cleared via Exec's
CacheClearU.
The MMU option automagically selects FastROM-mode for ROM-Kickstarts and
SafeKick-mode for Kickstarts loaded by ZKick/LKick ($200000). It is NOT
compatible to the WB-2.0 "CPU" command, because the MMU-Table used is much
more efficient, and in addition to "CPU" it write-protects the RAM-image.
Alien-MMU-Activations make the "Safe/Fast OS" gadget unavailable, and the
Verbose CLI mode will show up "(MMU)", which means the MMU is active but
incompatible to CPU-Control. And again: Ignore Enforcer!
_LVOColdReboot will be patched on MMU-activation in order to switch off
the MMU before resetting. A BusError-Handler makes the RAM-image behave
like a real ROM.
68020's without MMU (68851) and 68EC030 (68030-Light) should be recognized
correctly.
While the full GUI is open, CPU-Control uses a Delay/GT_GetIMsg loop to be
able to recognize changes of the Cache/VBR. In iconified (zoomed) state it
uses Exec's Wait without using any processor time.
The MOVESSP option should only be used in Startup-Sequences, because it is
a quite dangerous operation. SSP will only be moved, if there is REAL
FastRAM available and SSP is currently in SlowRAM. This operation is not
reversible.
--------------------------------------------------------------------------
Future Plans
--------------------------------------------------------------------------
- better 68ECxxx recognition
- Tooltypes
- (any more ideas?)
--------------------------------------------------------------------------
History
--------------------------------------------------------------------------
1.0 - initial release: 8-May-92
1.1 - release date: 13-May-92
- many serious bugs (hopefully) fixed
- overall code optimisation
- added 68020/851 and 68030 MMU support
- added "ICONIFY" option
1.2 - release date: 14-May-92
- added CHECK option to test for a specified processor
Example: CPU-Control check 68030
will produce an ErrorCode 5 if not found
CHECK always activates the NOWIN option
- cleaned-up menu layout
1.3 - release date: 16-May-92
- added MOVESSP option to allow moving the Supervisor
Stackpointer to fast memory
- CLI mode (especially CHECK) can now be used on 68000
- minor code cleanup
1.3a - release date: 7-Jul-92
- Cache-Inhibit for ChipRAM is no longer set automatically
because every well-behaving hardware (including A3000
and A2620/30 Turboboards) does this already.
In addition operation in ChipRAM is slightly faster now,
because the hardwired solution effects Datacache only.
In case of trouble the CCI option (CLI only!) could be
used to enable Cache-Inhibit. Of course this option is
only useful if used together with the MMU option.
1.4 - release date: 16-Jul-92
- implemented support for PC/AT-Bridgeboards
Cache-Inhibit for Dual-Ported-RAM will be set as soon
as the MMU becomes active (SafeKick or FastROM)
- implemented SystemInfo (Menu or CLI-Option "SI")
The short delay when measuring the MIPS performance is
quite normal, so don't worry about it!
- more Menu-Shortcuts available (just have a look...)
- minor code cleanup
1.5 release date: 21-Jul-92
- CPU-Control is Font-Sensitive now!
- replaced "CPU: ..... FPU: ....." text by "System Info"
gadget
1.5a release date: 17-Sep-92
- Oh dear... Cache-Inhibit for Bridgeboards did not work!
1.6 release date: 27-Oct-92
- FastROM and SafeKick works with 68040 now (hopefully!).
Address-Space is currently truncated to 64MB in order
to keep translation tables short and fast.
- improved MMU-switching routines
ATTENTION: If the main progamm file doesn't have a length
of 8124 Bytes it is DAMAGED!
--------------------------------------------------------------------------
Shareware
--------------------------------------------------------------------------
CPU-Control is SHAREWARE!
If you use this program for a longer period than one week,
please send me a donation of 10 US$ or equivalent!
So if you want more tools like
CPU-Control, TagScreens, UnArp and Safekick
think about it and keep developers developing.
THANK YOU!
Registered-User-Counter: 00008
(This means: Only eight persons have paid for it! What a shame...)
--------------------------------------------------------------------------
Author
--------------------------------------------------------------------------
Send bug-reports and/or suggestions to:
Martin Berndt
Fr.-Alfred-Str. 115
4100 Duisburg 14
Germany
E-Mail: M_BERNDT@WANDERER.ZER
m_berndt@tron.gun.de
martin berndt 2:242/21.111
--------------------------------------------------------------------------
(End of this wonderful document)