home *** CD-ROM | disk | FTP | other *** search
- %%
- %% This is file `flafter.sty', generated
- %% on <1995/6/21> with the docstrip utility (2.2i).
- %%
- %% The original source files were:
- %%
- %% ltoutput.dtx (with options: `flafter,trace')
- %%
- %% This is a generated file.
- %%
- %% Copyright 1993-1995 the LaTeX3 project and any individual authors
- %% listed elsewhere in this file. All rights reserved.
- %%
- %% For further copyright information see the file legal.txt, and any
- %% other copyright notices in this file.
- %%
- %% This file is part of the LaTeX2e system.
- %% ----------------------------------------
- %% This system is distributed in the hope that it will be useful,
- %% but WITHOUT ANY WARRANTY; without even the implied warranty of
- %% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- %%
- %% For error reports concerning UNCHANGED versions of this file no more
- %% than one year old, see bugs.txt.
- %%
- %% Please do not request updates from us directly. Primary
- %% distribution is through the CTAN archives.
- %%
- %%
- %% IMPORTANT COPYRIGHT NOTICE:
- %%
- %% You are NOT ALLOWED to distribute this file alone.
- %%
- %% You are allowed to distribute this file under the condition that it is
- %% distributed together with all the files listed in manifest.txt.
- %%
- %% If you receive only some of these files from someone, complain!
- %%
- %% Permission is granted to copy this file to another file with a clearly
- %% different name and to customize the declarations in that copy to serve
- %% the needs of your installation, provided that you comply with
- %% the conditions in the file legal.txt.
- %%
- %% However, NO PERMISSION is granted to generate or to distribute a
- %% modified version of this file under its original name.
- %%
- %% You are NOT ALLOWED to change this file.
- %%
- %%
- %% MODIFICATION ADVICE:
- %%
- %% If you want to customize this file, it is best to make a copy of the
- %% source file(s) from which it was produced. Use a different name for
- %% your copy(ies) and modify the copy(ies); this will ensure that your
- %% modifications do not get overwritten when you install a new release of
- %% the standard system. You should also ensure that your modified source
- %% file does not generate any modified file with the same name as a
- %% standard file. You can then easily distribute your modifications by
- %% distributing the modified and renamed copy of the source file, taking
- %% care to observe the conditions in legal.txt; this will ensure that
- %% other users can safely use your modifications.
- %%
- %% You will also need to produce your own, suitably named, .ins file to
- %% control the generation of files from your source file; this file
- %% should contain your own preambles for the files it generates, not
- %% those in the standard .ins files.
- %%
- %% The names of the source files used are shown above.
- %%
- %%
- %%% File: ltoutput
- \def \@addtocurcol {%
- \tr@ce{***Start addtocurcol}%
- \@insertfalse
- \@setfloattypecounts
- \ifnum \@fpstype=8
- \tr@ce{fpstype !p only (addtocurcol): \the \@fpstype = 8?}%
- \else
- \ifnum \@fpstype=24
- \tr@ce{fpstype p only (addtocurcol): \the \@fpstype = 24?}%
- \else
- \@flsettextmin
- \tr@ce{textfloatsheight (before) = \the \@textfloatsheight}%
- \advance \@textmin \@textfloatsheight
- \@reqcolroom \@pageht
- \tr@ce{textmin + textfloatsheight: \the \@textmin}%
- \tr@ce{page-so-far: \the \@reqcolroom}%
- \ifdim \@textmin>\@reqcolroom
- \@reqcolroom \@textmin
- \tr@ce{ORD? textmin being used}%
- \fi
- \advance \@reqcolroom \ht\@currbox
- \tr@ce{float size = \the \ht \@currbox (addtocurcol)}%
- \tr@ce{colroom = \the \@colroom (addtocurcol)}%
- \tr@ce{reqcolroom = \the \@reqcolroom (addtocurcol)}%
- \ifdim \@colroom>\@reqcolroom
- \@flsetnum \@colnum
- \ifnum \@colnum>\z@
- \@bitor\@currtype\@deferlist
- \tr@ce{deferlist: \@deferlist: (addtocurcol-before)}%
- \if@test
- \tr@ce{type already on list: defer (addtocurcol)}%
- \else
- \@bitor\@currtype\@botlist
- \tr@ce{botlist: \@botlist: (addtocurcol-before)}%
- \if@test
- \tr@ce{type already on list: bot---sent to addtobot}%
- \@addtobot
- \else
- \tr@ce{fpstype \ifodd \@tempcnta OK \else not \fi
- here: \the \@fpstype}%
- \ifodd \count\@currbox
- \advance \@reqcolroom \intextsep
- \ifdim \@colroom>\@reqcolroom
- \global \advance \@colnum \m@ne
- \global \advance \@textfloatsheight \ht\@currbox
- \global \advance \@textfloatsheight 2\intextsep
- \@cons \@midlist \@currbox
- \tr@ce{***Success: here}%
- \tr@ce{textfloatsheight (after-here) =
- \the \@textfloatsheight}%
- \tr@ce{colnum (after-here) = \the \@colnum}%
- \if@nobreak
- \else
- \addpenalty \interlinepenalty
- \fi
- \vskip \intextsep
- \box\@currbox
- \penalty\interlinepenalty
- \vskip\intextsep
- \ifnum\outputpenalty <-\@Mii \vskip -\parskip\fi
- \outputpenalty \z@
- \@inserttrue
- \else
- \tr@ce{Fail---no room at 2nd test of colroom
- (addtocorcol \string\intextsep)}%
- \fi
- \fi
- \if@insert
- \else
- \tr@ce{not here: sent to addtobot}%
- \@addtobot
- \fi
- \fi
- \fi
- \else
- \tr@ce{Fail: colnum = \the \@colnum:
- fpstype \the \@fpstype=ORD?}%
- \ifnum \@fpstype<\sixt@@n
- \tr@ce{ERROR: BANG float not successful (addtocurcol)}%
- \fi
- \fi
- \else
- \tr@ce{Fail---no room: fl box ht: \the \ht \@currbox
- (addtocurcol)}%
- \fi
- \fi
- \fi
- \if@insert
- \else
- \@resethfps
- \tr@ce{put on deferlist (addtocurcol)}%
- \@cons\@deferlist\@currbox
- \tr@ce{deferlist: \@deferlist: (addtocurcol-after)}%
- \fi
- }
- \def \@tracemessage #1{\typeout{LaTeX2e: #1}}
- \def \tracefloats{\let \tr@ce \@tracemessage}
- \def \notrace {\let \tr@ce \@gobble}
- \notrace
- \def \@traceval #1{\tr@ce{\string #1 = \the #1}}
- \def \tracefloatvals{%
- \@dblfloatplacement
- \@floatplacement
- \@traceval\@colnum
- \@traceval\@colroom
- \@traceval\@topnum
- \@traceval\@toproom
- \@traceval\@botnum
- \@traceval\@botroom
- \@traceval\@fpmin
- \tr@ce{\string\textfraction = \textfraction}%
- \@traceval\@dbltopnum
- \@traceval\@dbltoproom
- }
- \providecommand\tr@ce[1]{}
- \endinput
- %%
- %% End of file `flafter.sty'.
-