home *** CD-ROM | disk | FTP | other *** search
/ Media Gallery 1995 August / MG_0895.ISO / spea / manuals / vegvid_e / 41.txt < prev    next >
Text File  |  1995-05-12  |  1KB  |  24 lines

  1.  
  2. Installing the Windows Driver
  3.  
  4.  
  5. 1. The basic installation must have already been completed (as previously described). The environment variable 'GDC' must be set (the installation routine automates this by including a call in your AUTOEXEC.BAT)
  6.  
  7. 2. If Windows is not installed on your system yet, install it for standard VGA with the user defined setup (from the DOS command prompt) before continuing.
  8.  
  9. 3. Start Windows and put the SPEA disk 'MCI Drivers (Setup)' in drive A:
  10.  
  11. 4. Start the Program Manager (if not automatically started) and select the options 'File', 'Run' and then select the file SETUP.EXE from drive A:
  12.  
  13. 5. Select 'English' in the SPEA dialogue box which appears.
  14.  
  15. 6. Follow the instructions on the screen.
  16.  
  17. 7. At the end of the installation the V7SETUP menu is displayed. This can be used to change the screen resolution etc. (see next section).
  18.  
  19. 8. Restart Windows as suggested in the next dialogue box. This ends the installation.
  20.  
  21. 9. At the end of the installation you will find a new SPEA program group with a number of icons which represent various Windows tools. These are described in the following sections.
  22.  
  23.  
  24.