home *** CD-ROM | disk | FTP | other *** search
-
- 8-bit Music Construction Set to ST Music Studio Converter
- =========================================================
-
- Beta-test version
-
- By Greg Ozbirn
-
- March 25, 1990
-
- Plano, TX
-
- Thanks to Robert Lansdale for the Music Studio file format
- decoding.
-
-
- The files you should have after unarcing are:
-
- Combine.ttp - a program written in "C" that combines the MCS treble and
- bass staff files into one file called (filename).Tmp
-
- Convert.ttp - a program written in "C" that takes the (filename).Tmp
- file and converts it into ST Music Studio format
-
- Readme.txt - this file
-
-
- Preliminary info:
- A few months ago I became interested in converting some of my old
- Atari 8-bit Music Construction Set songs over to my ST's Music Studio
- format. I looked around on the online services such as Genie and
- Compuserve, but couldn't find any such program. So, I decided to write
- one myself.
-
- I would not have attempted this were it not for a file by Robert
- Lansdale which detailed the Music Studio file format. I figured this
- was half the battle. All that was left was to decipher the MCS file
- format and write a converter program.
-
- Well, the MCS format is a little strange, to say the least. It
- stores notes on the treble staff in a separate file from the notes
- in the bass staff. To make matters worse, the bass staff and treble
- staff overlap each other by eight notes. Still worse was the fact
- that MCS does not require notes in a vertical column to line up
- perfectly--Music Studio does. So, the first thing that must be done
- before converting a file is to go make sure that any notes that belong
- in the same vertical column are exactly in the same vertical column.
- This is no big deal, since you probably entered songs this way in the
- first place. However, the songs included on the MCS are not this way
- at all; they just seemed to put notes where ever they felt like it.
-
- I could have written a program that would have tried to line
- notes up in the same column as best as it could, but I figured that
- the human eye was a much better tool to do this without putting something
- in the wrong column. So, to convert a file, do this:
-
- 1. Somehow, get the file into the ST from the 8-bit. Probably one
- of Darek Mihocka's (St Xformer) tools is the best way to do this.
- Note that two files are needed. For example, with the "Turkey
- in the Straw" song, the files were:
- Turkey - the bass staff notes
- Turkey.mus - the treble staff notes
- The treble staff file is always the same filename as the bass staff,
- with .mus as an extension.
-
- 2. Execute file "Combine.ttp". Give it the filename (including the path)
- of the file to convert (without the extension, it will know to look
- for the other file). It will produce a file by the same filename
- with .Tmp as an extension.
-
- 3. Execute file "Convert.ttp". Give it the file produced in the prior
- step (including path but without extension). It will produce a
- Music Studio file by the same name (with .sng as an extension).
-
- 4. Boot up Music Studio and try it out on the converted song.
-
- 5. If some of the notes were in the wrong place, go look at the MCS
- file on the 8-bit, and make sure all notes belonging in a single
- vertical column are exactly in the same column. (The notes should
- line up, not the sharps, flats, etc.)
-
- If you encounter problems, I can be reached on Genie and Compuserve.
- My Compuserve ID is 75006,3016. The only testing that I've performed
- is to convert the "Turkey in the Straw" song included on the 8-bit MCS
- disk. If in converting something you find a conversion error not
- involving "wrong column" problems, let me know and I will attempt
- to correct the converter software.
-
- Also, feel free to send me email if you have benefitted from this
- software. Used properly, it sure beats converting the songs by hand!
-
- Note: This is freeware and may be uploaded anywhere--Enjoy!!
-
- Regards,
- Greg Ozbirn
-
- Disclaimer: As far as I know, this software is safe, but I assume
- no responsibility for any damage that may result from the use of
- this software.
-
-