home *** CD-ROM | disk | FTP | other *** search
- EKSEQ1 Version 1.1
- ===================
-
- EKSEQ1 (EKer's SEQuencer 1) is a 100 track, 240ppqn sequencer for
- the Atari ST.
-
- This distribution consists of four files:
-
- EKSEQ1.PRG The program itself
- EKSEQ1.RSC GEM resource file
- MANUAL.TXT The user manual
- README.TXT This file
-
- Hardware requirements: 512K RAM, colour monitor recommended although
- it will run in mono. STE compatible but MEGA & TT compatiblity unknown.
-
- DISCLAIMER:
- ===========
-
- This program comes with no warranty whatsoever. The author accepts no
- liability for any damages resulting from the use or inability to use this
- program. --- USE IT AT YOU OWN RISK!
-
- COPYING:
- ========
-
- The author grants permission for anyone to copy this program and documentation
- subject to the following conditions:
-
- 1 The four files mentioned above are always distributed together.
-
- 2 The four files are not modified in any way other than by compression/
- archiving/ASCII-encoding as required for transmission or storage.
-
- BUG REPORTS:
- ============
-
- Bug reports & (constructive) comments are welcome and may be sent to:
-
- Steven M. Eker
- La Ruette
- Rue de la mare
- St. Sampson's
- Guernsey
- Channel Islands
-
- Email: eker@loria.fr (until dec 92)
-
- If you report a bug, please say what machine & TOS version you are using.
-
- ACKNOWLEDGEMENTS:
- =================
-
- This program was compiled with Ian Lepore's "Heat & Serve C".
- GEM resources were made with Hisoft's "WERCS".
-