home *** CD-ROM | disk | FTP | other *** search
/ ftp.cvut.cz / DOS_LEGACY_DRIVERS_2008.zip / DOS_LEGACY_DRIVERS / eisa / !adp7770.cfg < prev    next >
Text File  |  2008-01-06  |  2KB  |  44 lines
  1.  
  2. BOARD
  3.     ID="ADP7770"
  4.     NAME="NetServer LM AIC-7770 Integrated SCSI Host Adapter"
  5.     MFR="Hewlett-Packard Co."
  6.     CATEGORY="MSD"
  7.     SLOT=EMB(9)
  8.     LENGTH=0
  9.     AMPERAGE=1000
  10.     SKIRT=NO
  11.     READID=YES
  12.     BUSMASTER=50
  13.     IOCHECK=VALID
  14.     DISABLE=SUPPORTED
  15.     COMMENTS="Embedded AIC-7770 Configuration File Ver. 1.02 Custom.  
  16.     NOTE: This is a customized version of the AIC-7770 EISA configuration 
  17.     file for use with the embedded AIC-7770 SCSI controller on HP
  18.     NetServer LM system boards. It should not be used with other system boards."
  19.  
  20. IOPORT(6)=0zc84h                        ;SCSI Enable/Disable 
  21.     INITVAL = rrrrrrrX                                      
  22.  
  23. IOPORT(1)=0zc87h                        ;Host configuration definition
  24.     INITVAL = 0X00X00X                  ; PwrDwn mode; IRQ mode; Reset;
  25.  
  26. IOPORT(4)=0zc5ch                        ;Interrupt definition
  27.     INITVAL = X000XXXX                                      
  28.  
  29. IOPORT(2)=0zc5dh                        ;Host configuration definition
  30.     INITVAL = XXXXXX00                  ; Data FIFO Thrshld; Bus release time
  31.  
  32. IOPORT(3)=0zc5ah                        ;SCSI configuration
  33.     SIZE = WORD
  34.     INITVAL = 0XXXXXXX0XXXXXXX
  35.  
  36. IOPORT(5)=0zc5fh                        ;Host configuration definition
  37.     INITVAL = 00XXXXXX                  ;used by !adp7771.cfg
  38.  
  39. IOPORT(7)=0zc5fh                        ;Host configuration definition
  40.     INITVAL = rrrrXrrr                  ;bit 3 = Channel Select
  41.  
  42.  
  43. INCLUDE  = "ADP7770.OVL"                ;Line 40
  44.