home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR9
/
RGBPLD.ZIP
/
README.PLD
< prev
next >
Wrap
Text File
|
1993-06-17
|
2KB
|
51 lines
The RGB PLD PROGRAMMER can be built for $150.00 . This distribution
contains the schematics and software needed to run the programmer.
The following files are included in this distribution:
README.PLD - this file.
RGBPLD.DOC - details the capabilities, construction and use of the
programmer.
RGBPLD.PL - The parts list and ordering information.
RGBPLD.EXE - this is the programmer program - run as a demo to see the
display and setup functions. It loads dummy data for viewing.
RGBPLD.CFG - the configuration file.
RGBSETUP.EXE - the diagnostic program for setup and testing.
RGBINT.EXE - interface board test program.
RGBPLD.HP - Main programmer board schematics - HPGL format.
PLDPCB.HP - programmer PC board layout.
RGBINT.HP - Interface board schematic - HPGL format.
INTPCB.HP - interface PC board layout.
This archive may be distibuted freely as long as the contents are not
changed and all files are included. There is no Warranty expressed or
implied. The author assumes no liability for its use.
Read RGBPLD.DOC to get more details.
The schematics maybe viewed or printed using any HPGL utility such as
PRINTGL (a shareware HPGL printing utility from Ravitz Software Inc).
Look for RGBLOGIC.ZIP - a low cost Logic Analyzer (using the same
interface board).
R.G. Brown
30 Wicks Rd
E Northport NY 11731
*** NOTE - cut the trace from ZIF pin 1 to the SIP resistor package.
The Lattice GAL20V8 programs better with pin 1 floating.