High Voltage Shareware/high1.zip/high1/DIR8/WF_V31A.ZIP/WF.TXT

Text File | 1994-01-13 | 115KB | 3,796 lines

@10

&
START OF FILE

    Keystroke sequence:   10
)    Alternate keystrokes: 10

The cursor is moved to the first character in the
file.
@11

&
END OF FILE

    Keystroke sequence:   11
)    Alternate keystrokes: 11

The cursor is moved past the last character in
the file.
@14

&
TOP OF SCREEN

    Keystroke sequence:   14
)    Alternate keystrokes: 14

The cursor is moved to the first line in the
window.
@15

&
BOTTOM OF SCREEN

    Keystroke sequence:   15
)    Alternate keystrokes: 15

The cursor is moved past the last line in
the window.
@16

&
UP EQUAL INDENT

    Keystroke sequence:   16
)    Alternate keystrokes: 16

The cursor is moved to the first line prior to this one
with the same indentation level. For example, if the current
line is indented 5 characters, this command will move the
cursor to the previous line which is indented 5 characters.
@17

&
DOWN EQUAL INDENT

    Keystroke sequence:   17
)    Alternate keystrokes: 17

The cursor is moved to the next line after this one
with the same indentation level. For example, if the current
line is indented 5 characters, this command will move the
cursor to the next line which is indented 5 characters.
@18

&
GO TO LINE NUMBER

    Keystroke sequence:   18
)    Alternate keystrokes: 18

The cursor will be repositioned to the specified
line number of the current window. A prompt box
will request the target line number. Enter any
number from 1 to 32767. If the value is preceded
by a plus (+) or minus (-) sign, the target line
number will be calculated relative to the current
line.
@19

&
GO TO COLUMN NUMBER

    Keystroke sequence:   19
)    Alternate keystrokes: 19

The cursor will be repositioned to the specified
column number of the current line. A prompt box
will request the target column number. Enter any
number from 1 to 999. If the value is preceded
by a plus (+) or minus (-) sign, the target
column number will be calculated relative to the
current column.
@20

&
GO TO WINDOW

    Keystroke sequence:   20
)    Alternate keystrokes: 20

The cursor will be moved to the current position
in another window on the screen. If only one
window is available, nothing will happen.
Otherwise a menu will appear, showing the
available windows, and the files currently in
each one. Select one of these choices by moving
the selection bar or by pressing the number of
the desired window.
@22

&
UNDO LAST DELETION

    Keystroke sequence:   22
)    Alternate keystrokes: 22

The line of text most recently deleted will be
inserted into the current text stream at the
cursor position. Note that this also applies to character or word
deletions as well as complete lines of text. By default, 20 lines of
deleted text are stored for possible undeletion. The undo limit can be
adjusted via a Setup command under the 
Global file options.
@23

&
RESTORE LINE

    Keystroke sequence:   23
)    Alternate keystrokes: 23

The current line of text will be restored to its
appearance just prior to when the cursor was
moved onto the line. The cursor position will
also be restored to the value when it entered the
line.
@34

&
SEARCH FOR PATTERN

    Keystroke sequence:   34
)    Alternate keystrokes: 34

The current window will be searched to find a
specified sequence of text. When the pattern is
found, the cursor will be positioned at the
beginning of the pattern, and the matched text
highlighted until the next keystroke.

A prompt box will allow entry of the text
pattern and search options. Enter any text or
control characters just as they would be typed in
the body of the file.
]

Search options control the behaviour of the
search. The following options are available:

 
U - ignore case (Upper-case) while searching
) 
B - search Backwards from the cursor
)     position.
) 
W - search for whole Words only.
) 
G - search Globally, starting at the
)     beginning of the file (or end, if
)     searching backwards).
) 
L - search Locally (only within marked block).
) 
n - search for the nth occurrence of the
)     string (n is an integer).
]

Enter the following sequence of keystrokes to
search for the end of each text line:
<CtrlP><CtrlM><CtrlP><CtrlJ>. This sequence
enters Carriage return/Line feed into the search
pattern.

Note that each pattern must be found within a
single line. No match may span multiple lines.
@35

&
SEARCH AND REPLACE

    Keystroke sequence:   35
)    Alternate keystrokes: 35

The current window will be searched for a
specified sequence of text. When the pattern is
found, it will be replaced with another specified
text sequence.

A prompt box will allow entry of the search
text, replacement text, and search options. Enter
any text or control characters just as they would
be typed in the body of the file.
]

Search options control the behaviour of the
search. The following options are available:

 
U - ignore case (Upper-case) while searching
) 
B - search Backwards from the cursor
)     position.
) 
W - search for whole Words only.
) 
G - search Globally, starting at the extreme
)     end of the file.
) 
L - search Locally (only within marked block).
) 
N - do Not prompt for confirmation when the
)     pattern is found.
) 
n - replace n occurrences of the string
)     (n is an integer).
]

If the N option is not specified, a prompt will
occur each time the search pattern is found. This
prompt will provide the following options:

 
Y - replace this text and continue searching.
) 
N - do Not replace, but continue searching.
) 
A - replace this text and replace All others
)     without prompting.
) 
Q - do not replace, and Quit searching.
]

Enter the following sequence of keystrokes to
search for the end of each text line:
<CtrlP><CtrlM><CtrlP><CtrlJ>. This sequence
enters Carriage return/Line feed into the search
pattern.
@36

&
SEARCH AND USE MACRO

    Keystroke sequence:   36
)    Alternate keystrokes: 36

The current window will be searched for a
specified sequence of text. When the pattern is
found, the cursor will be positioned just past the end of the
string, and a specified macro will be played
back.
]

A prompt box will allow entry of the search
text, macro selection, and search options. Enter
any text or control characters just as they would
be typed in the body of the file. The macro must
have been defined prior to using the search and
apply macro command.
]

Search options control the behaviour of the
search. The following options are available:

 
U - ignore case (Upper-case) while searching
) 
B - search Backwards from the cursor
)     position.
) 
W - search for whole Words only.
) 
G - search Globally, starting at the extreme
)     end of the file.
) 
L - search Locally (only within marked block).
) 
N - do Not prompt for confirmation when the
)     pattern is found.
) 
n - apply macro for n occurrences of the
)     search string (n is an integer).
]

If the N option is not specified, a prompt will
occur each time the search pattern is found. This
prompt will provide the following options:

 
Y - apply macro and continue searching.
) 
N - do Not apply macro, but continue searching.
) 
A - apply macro and apply at All matches
)     without prompting.
) 
Q - do not apply macro, and Quit searching.
]

Enter the following sequence of keystrokes to
search for the end of each text line:
<CtrlP><CtrlM><CtrlP><CtrlJ>. This sequence
enters Carriage return/Line feed into the search
pattern.
@37

&
SEARCH AGAIN

    Keystroke sequence:   37
)    Alternate keystrokes: 37

The previous search operation will be repeated.
This will repeat a plain search, a search and
replace, or a search and apply macro command.
@38

&
OPERATING SYSTEM

    Keystroke sequence:   38
)    Alternate keystrokes: 38

Any DOS command or program may be executed. A
prompt box will ask for the name of the command
or program to run. Entering an empty line at the
prompt box will cause a DOS shell to be invoked.
You may execute any sequence of DOS commands from
the shell, and finally return to the editor by
typing Exit.
]

The DOS shell requires that a copy of COMMAND.COM
be present in the normal drive and directory
assigned by DOS. Sufficient random-access memory
must be available for the shell and any command
that you specify.

Do not execute any program that becomes memory
resident while within the DOS shell.
@39

&
BACKWARD TAB

    Keystroke sequence:   39
)    Alternate keystrokes: 39

The cursor will be moved to the next tab left of
the current position. This command is available
only in fixed tab mode.
@40

&
EDIT ANOTHER FILE

    Keystroke sequence:   40
)    Alternate keystrokes: 40

The current window will be cleared, and a prompt
box will ask for the name of another file to
edit. If the current window already holds a file
that has been modified, you will be given the
opportunity to save it.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.

By entering an empty line for the file name, you
can edit a file without specifying a name for it.
A name can be specified later when you want to
write it out to disk.
@41

&
QUIT AND EXIT

    Keystroke sequence:   41
)    Alternate keystrokes: 41

The editing session will end and you will return
to DOS. If any windows have been modified, prompt
boxes will appear and you will be given the
opportunity to save each modified file. If you
type <Esc> at any of the prompt boxes, the QUIT and
EXIT command will be interrupted and you will
return to the current text window.
@42

&
READ BLOCK FROM FILE

    Keystroke sequence:   42
)    Alternate keystrokes: 42

A prompt box will ask for the name of a file to
read. This file will be read into the current
window, starting at the current cursor position.
The newly read text will be marked as a block.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.
@43

&
SAVE AND CONTINUE EDIT

    Keystroke sequence:   43
)    Alternate keystrokes: 43

The contents of the current window will be saved
to disk, using a file name the same as when the
file was first read. If the file has not been
named, a prompt box will ask for a new name. If
the disk file already exists, a backup copy will
be made before overwriting the existing version.
The cursor will remain in place after the file is
written to disk.
@44

&
WRITE BLOCK TO FILE

    Keystroke sequence:   44
)    Alternate keystrokes: 44

The currently marked block will be written to a
disk file. If no block is marked, an error
message will be produced. If the disk file
already exists, you will be given the choice of
overwriting it or appending to it.
@45

&
SAVE AND EXIT

    Keystroke sequence:   45
)    Alternate keystrokes: 45

The editing session will end and you will return
to DOS. If any windows have been modified, they
will be saved. If any file does not have a name
you will be prompted to enter a name. If you
type <Esc> at any of the prompt boxes, the SAVE AND
EXIT command will be interrupted and you will
return to the current text window.
@46

&
FILE OPEN

    Keystroke sequence:   46
)    Alternate keystrokes: 46

A prompt box will ask for the name of a new file
to read. If another file is already being edited,
the current window will be split in half, and the
new file will be read into the new window.

By specifying a file name that matches an
existing window, you may look at two regions of
the same file. Changes made in one window will
affect all other windows which contain the same
file.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.

By entering an empty line for the file name, you
can edit a file without specifying a name for it.
A name can be specified later when you want to
write it out to disk.
@47

&
RESIZE WINDOW

    Keystroke sequence:   47
)    Alternate keystrokes: 47

Use this command to change the height of the
current window. The up and down arrow keys will
move the window dividing lines. Press <Enter>
when the window has the desired size.
@48

&
SAVE/SWITCH FILES

    Keystroke sequence:   48
)    Alternate keystrokes: 48

The file in the current window will be stored to
disk. A prompt box will then ask for the name of
another file to edit. The new file will be read
into the current window. All window sizes will
remain the same.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.

By entering an empty line for the file name, you
can edit a file without specifying a name for it.
A name can be specified later when you want to
write it out to disk.
@49

&
NEXT WINDOW

    Keystroke sequence:   49
)    Alternate keystrokes: 49

The cursor will be moved to the current position
in the next window down on the screen. If the
cursor is already in the lowest window, it will
move to the topmost window. If there is only one
window, nothing will happen.
@51

&
ZOOM WINDOW

    Keystroke sequence:   51
)    Alternate keystrokes: 51

The current window will grow to fill the screen.
Other text windows are kept in memory, but are
not visible until zoom is toggled off. The Next
window and Previous window commands will bring
each window to the forefront in succession. Text
markers and blocks may be accessed as usual in
the hidden windows. The only exception is block
delete: a block will not be deleted from a hidden
window.
]

When zoom is active, a letter Z will appear at the
left edge of the window status line. Toggling
the zoom command again will make all windows
visible.
@52

&
BLOCK BEGIN

    Keystroke sequence:   52
)    Alternate keystrokes: 52

The cursor position will become the start of a
marked block.
@53

&
BLOCK END

    Keystroke sequence:   53
)    Alternate keystrokes: 53

The cursor position will become the end of a
marked block.
@54

&
START OF BLOCK

    Keystroke sequence:   54
)    Alternate keystrokes: 54

The cursor will be moved to the start of the
current block, whether it is visible or not.
@55

&
END OF BLOCK

    Keystroke sequence:   55
)    Alternate keystrokes: 55

The cursor will be moved to the end of the marked
block, whether it is visible or not.
@56

&
BLOCK COPY

    Keystroke sequence:   56
)    Alternate keystrokes: 56

A copy of the marked block will be inserted at
the current cursor position.
@57

&
BLOCK MOVE

    Keystroke sequence:   57
)    Alternate keystrokes: 57

The marked block will be removed from its current
location and inserted at the current cursor
position.
@58

&
BLOCK DELETE

    Keystroke sequence:   58
)    Alternate keystrokes: 58

The marked block will be deleted from the text
stream. If the block spans more than one line,
the deleted lines may be recovered via the
Undelete command.
@59

&
HIDE BLOCK

    Keystroke sequence:   59
)    Alternate keystrokes: 59

The on-screen highlighting of the marked block is
toggled on or off. Blocks can be copied, moved,
or deleted only when the block is visibly marked.
Movement to block start or end is possible even
when the block is not visible.
@82

&
LOAD MACROS FROM DISK

    Keystroke sequence:   82
)    Alternate keystrokes: 82

A previously stored file of Word Fugue keyboard
macros is loaded into memory. The macro file is a
binary file in a special format used by
Word Fugue. Macros may be recorded, edited, and
stored to disk from within Word Fugue. Each macro
file contains 37 macros, each of which may hold
up to 255 keystrokes. Word Fugue automatically
loads the macro file WF.MAC, if found, when the
program is started.
@83

&
STORE MACROS TO DISK

    Keystroke sequence:   83
)    Alternate keystrokes: 83

The current set of Word Fugue keyboard macros is
written to a disk file. A prompt box will ask for
a file name. The macro file is a binary file in a
special format used by Word Fugue. Macros may be
recorded, edited, and stored to disk from within
Word Fugue. Each macro file contains 37 macros,
each of which may hold up to 255 keystrokes.
Word Fugue automatically loads the macro file
WF.MAC, if found, when the program is started.
@84

&
TOGGLE MACRO RECORD

    Keystroke sequence:   84
)    Alternate keystrokes: 84

Any keystrokes entered after this command is
activated are stored within a keyboard macro,
which may be edited and later played back within
Word Fugue. To stop macro recording, enter this
command a second time. A prompt box will ask for
which of the 37 macros should store the newly
recorded one, and for a descriptive name for the
macro.

Each macro can hold up to 255 keystrokes. Macros
can play back other macros. Macros are played
back by pressing one of the installed keystroke
combinations, or by choosing the 
Word Fugue Macro
Playback option from the menu system.

@95

&
PLAY BACK MACRO

    Keystroke sequence:   95
)    Alternate keystrokes: 95
)
This command allows you to replay a macro simply
by pressing the activation character 0..9 and A..Z
without having to go through the macro replay menu.
Lowercase letters count as uppercase letters.
)
)Press the replay macro command sequence followed by the
number or letter. The macro will be replayed.

@96

&
PLAYBACK MACRO PROMPTED

This command will play back a previously recorded
macro. A menu showing the name of all macros will
appear; you should choose the one desired, either by moving
the high light bar, or by typing in the number corresponding
to the macro.

The following screen gives shortcut commands which
allow you to playback macros without using the
menu system.
]
The following commands will playback a macro
without using the menu system:
)Macro 1    Main: 85    Alternate: 85
)Macro 2    Main: 86    Alternate: 86
)Macro 3    Main: 87    Alternate: 87
)Macro 4    Main: 88    Alternate: 88
)Macro 5    Main: 89    Alternate: 89
)Macro 6    Main: 90    Alternate: 90
)Macro 7    Main: 91    Alternate: 91
)Macro 8    Main: 92    Alternate: 92
)Macro 9    Main: 93    Alternate: 93
)Any Macro 0..9 A..Z   Main: 95    Alternate: 95   followed by
number or letter
)Any Macro n times   Main: 94    Alternate: 94
)   You will be prompted for macro and number of times
]

The connection between macros and activation characters is
quite simple - the first 10 macros are named 0 to 9, the
next 26 are named A to Z.
@97

&
EDIT CURRENT FILE DESCRIPTION

    Keystroke sequence:   97
)    Alternate keystrokes: 97

Use this command to add or edit the descriptive
comment attached to the file you are editing.

File descriptions are stored in one of 2 formats (you can toggle
between them) - Word Fugue's proprietary format (stored in FILEINFO.WF)
and that supported by 4Dos - the shareware COMMAND.COM replacement
(stored in DESCRIPT.ION).

If you have 4Dos and use the Describe
command, then you should probably store file descriptions in 4Dos
format. That gives you up to 40 characters of description.

The word
Fugue format gives you up to 65 characters. This option can be saved
with the Save options command.
@98

&
PACK DESCRIPTION FILE

    Keystroke sequence:   98
)    Alternate keystrokes: 98

Use this command to remove descriptions of files
that are no longer in the directory, or which
have blank comments.

)Comments are stored in a file called FILEINFO.WF
@99

&
SET DOT COMMAND PREFIX

    Keystroke sequence:   99
)    Alternate keystrokes: 99

By default, all printer commands are prefixed by a dot (.)
in column 1. This is the wordstar standard. However, this may interfere
with some of your files, and so this command allows you to set it
to be any special character. For example, you could use an @, or perhaps
a |, or any character that is not a letter of the alphabet or a
number.

Note that if you change this (say to |) then all embedded print
functions will also change (eg from {.@D8} to {|@D8})
@100

&
PASTE RESULT

    Keystroke sequence:   100
)    Alternate keystrokes: 100

This function is used to paste various function results into
the text file you are editing.
)
)   
= - pastes the result of the last calculation
)   
# - pastes the actual equation used
)   
@ - prompts for a print function to evaluate,
)         and pastes the result of that evaluation
)   
R - Loads the stored ruler file 
WF.RLR and lets you
)         select a ruler to paste into your document
)   
M - Prompts for the name of a new macro file, and
)         allows you to select one to replay. Once the
)         macro has been replayed, the original macro
)         file is reloaded
)   
X0 to 
X9 - copies the marked block into the pick
)         buffer #0 to #9
)   
0 to 
9 - pastes the contents of pick buffer #0 to
)         #9 into the document at the cursor location

@101

&
CALCULATOR

    Keystroke sequence:   101
)    Alternate keystrokes: 101

This function pops up a calculation window, and permits
you to enter mathematical equations, and calculates the
result when you press Enter. A list of available
functions is given in the window.

Equations are entered in normal mathematical fashion,
including brackets:
)      SQRT(PI + exp(1.734502))-sin(50)
) or   144+84+88+35+69
)
)Decimal values should start with 0. rather than .,
since the calculator will beep if it finds an error.
Sometimes an error message will appear, when the
calculator detects situations like dividing by zero, or
a floating point overflow. This last occurs when you
exceed the bounds of the calculable values. The range
of values is ± 1*E1400 (which is quite large) and is
calculated to 19 significant digits.

If you have an 8087 maths co-processor, the calculator
will use that, otherwise it will emulate it. (Same
accuracy, only slower).
@102

&
COLUMN REPLACE

    Keystroke sequence:   102
)    Alternate keystrokes: 102

Column replace mode only has meaning in conjunction
with Column Mode being ON. When Column Replace Mode is
ON moved and copied blocks will overwrite any text in
the area they are copied to, and delete and move will
space fill the deleted text.

When Column Replace mode is OFF, moved and copied
blocks will push existing text to the right, and delete
and move will suck text left to fill the hole left by
the deleted text.

@103

&
COLUMN MODE

    Keystroke sequence:   103
)    Alternate keystrokes: 103

Column mode determines whether blocks of text continue
at the start of the next line, or continue at the same
column number in the line below. When column mode is
off, all text between the start block marker and the
end block marker is moved/copied/deleted. If Column
Mode is ON, the start marker is considered to mark the
top left corner of a rectangular block, while the end
marker is considered to mark the bottom right corner.
If the Block end column is less than the block start
column, no block will be visible.

If Column Mode is ON, the status line will show either

Tbl I if Column Replace is OFF, or 
Tbl R if Column
Replace is ON.

If word wrap is on, columns of text can be delineated
by use of < and > or ] in the ruler line. In this case,
columns of text will wrap independently of other
columns, paragraph reformat will only reformat text
within the column boundaries, text will only insert
within the column (other columns will not be
displaced), and delete character and delete word will
only delete within column boundaries.

@104

&
GET INFORMATION

    Keystroke sequence:   104
)    Alternate keystrokes: 104

Various facts about Word Fugue and the current
file are displayed. Information shown includes
the complete path name of the current file; its
size in bytes, words, lines, and pages; whether
it has been modified since last disk save; the
time and date; available RAM and disk space; the
current directory; and the DOS and Word Fugue
version numbers.

Some of the statistics that Word Fugue presents
take a while to compute. By pressing any key while
the Get Info window is being updated, you can
"short-circuit" the computation of some items.
@106

&
TOGGLE INSERT MODE

    Keystroke sequence:   106
)    Alternate keystrokes: 106

When insert mode is active, newly typed text is
inserted into the current text line, pushing
characters to the right of the cursor aside to
make room. When insert mode is off, newly typed
text overwrites existing text. Many commands,
such as block copy and insert line, operate in
insert mode independent of the setting of this
toggle.
@107

&
TOGGLE AUTOINDENT MODE

    Keystroke sequence:   107
)    Alternate keystrokes: 107

When autoindent mode is active and the <Enter>
key is pressed, the new line of text will be
indented the same number of spaces as the line
immediately above it. The setting of this toggle
also affects the operation of the paragraph
reformatting command.
@108

&
TOGGLE CASE

    Keystroke sequence:   108
)    Alternate keystrokes: 108

The case of the character at the cursor location
will be toggled from upper to lower, or from
lower to upper. If a block is marked and visible,
and the cursor is anywhere within the marked
block, the command will toggle the case of the
entire block.
@109

&
LOWER CASE

    Keystroke sequence:   109
)    Alternate keystrokes: 109

The case of the character at the cursor location
will be set to lower-case. If a block is marked
and visible, and the cursor is anywhere within
the marked block, the command will change the
case of the entire block.
@110

&
UPPER CASE

    Keystroke sequence:   110
)    Alternate keystrokes: 110

The case of the character at the cursor location
will be set to upper-case. If a block is marked
and visible, and the cursor is somewhere within
the marked block, the command will change the
case of the entire block.
@111

&
SET RIGHT MARGIN

    Keystroke sequence:   111
)    Alternate keystrokes: 111

A prompt box will ask for a new value for the
right margin. Entering an empty prompt string will
set the right margin to the current cursor column.
The right margin is used only when Word Wrap mode
is active. When that is so, text entered in a
column beyond the right margin will automatically
be wrapped to the next line. Paragraph formatting
will move words so that lines are as full as
possible within, but not exceeding, the right
margin.
@112

&
FORMAT PARAGRAPH

    Keystroke sequence:   112
)    Alternate keystrokes: 112

Format paragraph is available only when Word
Wrap mode is active. Paragraph reformatting will
move words so that lines are as full as possible
within, but not exceeding, the current left and
right margins. If Justify mode is active, the
lines will also be evenly filled with spaces so
that the rightmost word ends on the right margin.

The paragraph reformat is terminated when a blank
line, or a line beginning with a format character
(.), is reached.
@113

&
TOGGLE WORD WRAP

    Keystroke sequence:   113
)    Alternate keystrokes: 113

When Word Wrap mode is active, paragraph
reformatting and automatic word wrap are
available. Otherwise, left and right margin
settings are ignored, and text may be entered in
any column up to the maximum line length.
@114

&
SET LEFT MARGIN

    Keystroke sequence:   114
)    Alternate keystrokes: 114

A prompt box will ask for a new value for the
left margin. Entering an empty prompt string will
set the left margin to the current cursor column.

When Word Wrap mode is active, the left margin
controls the leftmost position where text may be
entered. The left margin also controls the
operation of the paragraph formatting command.

The left and right margins can be made visible by
toggling the Tab Line Display.

Print formatting commands require that the
format character (.) be located in column 1 even
if the left margin is set to a number greater
than one. To achieve this, enter the format
command starting at the left margin, move the
cursor to column 1 with the Left of Line command,
and delete the intervening spaces via Delete
Word. Alternatively, activate the Margin Release
command while the format command is entered.
@115

&
DISPLAY TABS

    Keystroke sequence:   115
)    Alternate keystrokes: 115

Toggling Display Tabs ON reserves one line of the
current window for display of tab settings and
margins. The tabs and margins can be active
whether or not the tab line is visible.
@116

&
INSERT UNDO BUFFER

    Keystroke sequence:   116
)    Alternate keystrokes: 116

The entire contents of the undo buffer are
inserted into the current text stream, prior to
the current line. This empties the undo buffer,
that is, the operation can be used only once for
any set of deletions.
@117

&
TOGGLE JUSTIFY

    Keystroke sequence:   117
)    Alternate keystrokes: 117

When Justify is active, word wrap and paragraph
reformat operations will cause each line to be
filled in with spaces such that the rightmost
non-blank character is exactly on the right
margin.
]

By toggling Justify off, and reformatting lines
or paragraphs, the additional blanks will be
automatically removed from the text. Note that
blanks manually inserted (via the Tab command,
etc.) will also be removed, unless the Compress
Wrap mode is turned off.

Word Fugue does not differentiate between "soft"
blanks added during justification and "hard"
blanks manually entered. However, the character
<CtrlO> may be used in place of a normal blank
when non-changing spaces are desired. The <CtrlO>
will be printed as a normal space. To enter a
<CtrlO> in the text stream, press 25<CtrlO>.
@118

&
TOGGLE PAGE BREAKS

    Keystroke sequence:   118
)    Alternate keystrokes: 118

When pagination is activated, the right two
columns of the text window will be devoted to
showing page breaks. The characters 
₧° in those
columns indicate that the corresponding line is
the first printing text line on its page.

In addition, the status line for the window will
indicate what page number the cursor is on. The
Jump to Page command is available only when
pagination is activated.
]

Word Fugue calculates page numbers while it is
waiting for you to enter keystrokes. As a result,
if you enter new text it may take a short period
of time before the page break markers are redrawn
at their new positions.

Although the page breaks displayed on screen
correspond to those in a print-out of the
document, Word Fugue does not store any special
characters in the disk file. Page breaks are
recomputed each time the file is read into
Word Fugue.

Pagination can be precisely controlled via the
formatting commands. See the help section for
File Print Formatting.
@119

&
TOGGLE FONT DISPLAY

    Keystroke sequence:   119
)    Alternate keystrokes: 119

When Font Display is enabled, print formatting
commands that control font selections will not
be displayed on-screen. Instead the marked text
will be displayed in a colour or attribute
corresponding to the font. This "what you see is
what you get" mode allows more accurate alignment
of tables, and avoids multiple print cycles to
correct formatting commands.

The screen colours for each font may be adjusted on
the 
Options Colours menu.

When font display is enabled, the control
characters that select the fonts are not visible.
However, the cursor can be positioned over the
control character, and it can be deleted if
desired. The Word Fugue hardware cursor grows to a
large block when it is positioned over the
control character. The value of the control
character will be displayed at the right hand
edge of the window status line when the cursor is
positioned over it.

Word Fugue computes the display of on-screen fonts
while it is waiting for you to enter keystrokes.
As a result, if you enter new text it may take a
short period of time before control characters
disappear and fonts are drawn in their final
colours.
@120

&
CENTRE LINE

    Keystroke sequence:   120
)    Alternate keystrokes: 120

The current line will be centred between the
left and right margins. This command is active
only when Word Wrap mode is on. If both Word Wrap
and Column Mode are on, the text within the current
column will be centred within the column boundaries.
@121

&
SET COLOURS

    Keystroke sequence:   121
)    Alternate keystrokes: 121

All of the editor colours can be customised to
your liking. Independent colour settings are
available for normal text, block marked text,
window status lines, the prompt line at the top
of the screen, text in menus and prompt boxes,
menu frames, the highlighted character by which
each menu item may be selected, the currently
selected menu item, the block cursor (when
active), and the seven most common fonts.
]

The colours that you select are saved with
Word Fugue when you execute the 
Options Save
setup command.
@122

&
SAVE SETUP

    Keystroke sequence:   122
)    Alternate keystrokes: 122

The toggles, settings, colours, and options are
stored as Word Fugue defaults when this command is
executed. WF.EXE must be present in the default
directory or in the installed home directory.
@123

&
PRINT FILE

    Keystroke sequence:   123
)    Alternate keystrokes: 123

Any text file can be printed from within
Word Fugue. Files formatted with Word Fugue's page
layout commands and font controls will print with
multiple fonts, headers, footers, and page breaks.

Do not press <Enter> on the first menu selection,

Print file now, until the other items in the box
have been set to your satisfaction. Selecting the
first item starts the print job.

After you select the second menu item, 
Name of
file, a prompt box will request entry of the name
of the file to print. When prompted for a file
name, you may enter DOS wildcards or the name of
another drive or subdirectory. In this case,
another window will display the names of all
matching files. You can select from this list by
using the cursor keypad, or by pressing the first
letter of the filename in which you are
interested.

If you wish to print a file that is currently
loaded in memory, be sure to save any recent
changes to disk before trying to print it. If you
attempt to print a file that has unsaved changes,
Word Fugue will prompt you to save the file first.
You can save the file at that point, but if you elect not to, then you
will not be able to print the file until you DO save it.

Set 
Auto formatting OFF if you wish to have
Word Fugue ignore formatting commands (. commands)
in your text. In this case, text will print
continuously with no form feeds or page breaks.
Control codes embedded in the text will be
written to the output without interpretation.

By default, Word Fugue prints all pages of the
document. You can set starting and stopping
pages if desired. If you prefer, you can select

Odd or Even Pages to print ODD pages only or
EVEN pages only to facilitate printing on both
sides of the page. Print all odd pages first, then
place the paper back upside down and print all
even pages.

If you need to make more than one copy, you can
select up to 20 
Copies.

You can also change how far from the left edge of the page the text
prints. Select the 
Text Offset option to specify the number of
characters to skip from the loft edge of the page. Note that if you
are printing wide lines, you should be careful not to move the text
too far to the right, or some characters will disappear off the right
hand edge of the paper!

If you are a writer who must submit articles double spaced, you can
select the spacing from the print menu. Select 
Initial Line Spacing,
and type in the multiple of normal spacing (6 lines per inch) that you
require. For Double spacing, type in 2.0, for one and a half spacing
type in 1.5. For 8 lines per inch you would type in 0.75. You will
also be asked for the units that your printer uses. If you do not
know, press enter to accept the value given.

Select from any of the available printer
definition files (default extension .PDF) to find
one that is appropriate for your printer. You can
change to another file and use 
Options Save setup
to regularly use that file.

If your printer allows it, you can select 
Quality
of Print as Letter Quality for a higher quality of print.
The codes for letter quality and default quality
are stored in the printer definition files.

You can also choose between sending the printed
output to LPT1, LPT2, LPT3, COM1, COM2, PRN or to a
file. LPTn and COMn refer to the computer port where
your printer is attached. If the printer is attached to
a serial port, you would select either COM1 or 2, while
if it is attached to a parallel port you would select
LPT1, 2 or 3. If you are printing on a network, you may
find that when you print, nothing is printed until you
exit Word Fugue. If this is the case, you should select
PRN. Your choice will be saved with Word Fugue when you

Save Setup.

When output is printed to a file, all control
codes are written out just as when they are
printed. In this case, you must also specify the
name of the output file using the prompt window.

There are 2 special PDFs (Printer Definition Files)
included with Word Fugue for use with printing to a
spool file. They are PREVIEW.PDF and ASCII.PDF. You
would use PREVIEW if you want to be able to see how
your work will print without actually doing a print
run. You would use this PDF to print to a file, and
then browse the file to see how each page is laid out.

The ASCII pdf is used for producing an ascii file that
corresponds to a printed document, but without any font
changes or underlining. This is very useful if you want
to issue some documentation on disk.

Set 
Manual paper feed ON if you wish to have
Word Fugue prompt you to insert a new sheet of
paper after each page. This choice is also stored
as part of the printer definition file for your
selected printer.

Set 
Use formfeeds ON if your printer accepts
ASCII character #12 to eject each page. Otherwise,
Word Fugue will fill out the end of each page with
blank lines.

After making all selections, move the menu bar to
the 
Print file now item and press <Enter>. If
you decide not to print, just press <Esc>.
Printing occurs as a background task. You can
continue editing with minimal loss of performance
while the print job continues.

To stop a print job at any time, execute the
Print File command sequence. Word Fugue will
confirm whether you want to stop the print job.
]

&
PRINTER DEFINITIONS

You can edit and store printer definitions from
within Word Fugue, using the 
File Print menu.

Select a printer definition file (default
extension .PDF) using the 
Which printer menu
item. Word Fugue will load this printer file into
memory.

Any of the command sequences that control various
printer fonts can be edited using the 
Edit printer
codes menu selection. Each font is associated
with two strings - one to turn the font ON, and
another to turn it OFF. The sequences are activated by
control characters embedded in the text. These characters
can be inserted either by the special font characters (look
in help under Text Attributes) or by pressing the Control
character insertion command (
25 or 
25) followed by the
letter corresponding to the control character.

The relationship between the order of the sequences in the
file and the codes needed to activate them are as follows:

)Initialisation  - sent to printer before file is printed
)Reset          - sent to printer after file is printed
)   these others are sent when a control character is
encountered - the ON sequence is sent the first time, and the
OFF sequence is sent the second time. (then back to ON ...)
)
)^B On & Off    - usually bold
)^D On & Off    - usually double strike
)^S On & Off    - usually underline
)^T On & Off    - usually superscript
)^V On & Off    - usually subscript
)^A On & Off    - usually compressed
)^Y On & Off    - usually italics
)^C On & Off
)^E On & Off
)^F On & Off
)^G On & Off
)^N On & Off
)^O On & Off
)^P On & Off
)^Q On & Off
)^R On & Off
)^U On & Off
)^W On & Off
)^X On & Off

The linkage between the control character encountered in the
text and the sequence used is positional as detailed above.
Feel free to define your own meanings for these sequences,
but we advise you to include the activation character and
the words ON or OFF in the name, so that you do not forget
what they are. Word Fugue predefines the names of each
sequence, so should you delete the name of a sequence, word
Fugue will show the predefined name.

When you choose a sequence to edit, it appears in
another window. It can be edited using the cursor
keys, and the <Del> or <Backspace> keys. Most
characters you type will be inserted literally
into the string. <CtrlBksp> will delete the
existing string. <Enter> will end the session
in the string editor. In case you need to enter
any of these special keys as part of the control
string, press the <ScrollLock> key to enter
Literal mode. In this mode, all keystrokes will be
inserted into the string without further
interpretation.

The printer definition currently held in memory can be
stored to a disk file using the 
Save printer setup menu
item. Word Fugue stores the printer command sequences for all
fonts, as well as the default settings for manual paper feed
and formfeeds, when you save the setup.

Word Fugue will prompt for a file name when you
decide to store the current definition. The
default extension for printer definitions is .PDF.
@124

&
FLUSH UNDO BUFFER

    Keystroke sequence:   124
)    Alternate keystrokes: 124

The contents of the undo buffer will be deleted,
freeing up whatever memory is being used. This
command is useful in combination with the Insert
Undo Buffer command.
@125

&
TOGGLE MAKE BACKUP

    Keystroke sequence:   125
)    Alternate keystrokes: 125

When this is ON the old version of the file
(before editing) is saved with the extension of .BAK
)
)When this is OFF the old version is not saved.
@126

&
TOGGLE CONTINUOUS REFORMAT

    Keystroke sequence:   126
)    Alternate keystrokes: 126

When this is ON and word wrap is set, the current
paragraph is reformatted as you edit it. If you press
any key, reformatting stops until you pause. The pause
is about a second, and in most cases, the paragraph can
be reformatted before you continue typing.

When this is OFF paragraphs are not reformatted unless
you use the Reformat Paragraph command (112 or 112)

Refer to this command for further information.
@127

&
ACTIVE DIRECTORY

    Keystroke sequence:   127
)    Alternate keystrokes: 127

The current default drive or directory may be
changed using this command. Entering wildcards
will cause a directory window to appear showing
possible choices.

Files previously opened in other directories will
be properly accessed even after the active
directory is changed.
@128

&
FILE DIRECTORY

    Keystroke sequence:   128
)    Alternate keystrokes: 128

Use this command to browse through a file
directory. Use standard DOS pathname and wildcard
notation to specify a file mask for the directory.

You can press 
F1 to add or edit a description line attached
to the highlighted line.
@129

&
GO TO PAGE NUMBER

    Keystroke sequence:   129
)    Alternate keystrokes: 129

The cursor will be repositioned to the first line
of the specified page of the current window. This
command is available only when pagination is
active for the window. A prompt box will request
the target page number. Enter any positive integer
value. If the value is preceded by a plus (+) or
minus (-) sign, the target page number will be
calculated relative to the current page.
@130

&
SET TOP MARGIN

    Keystroke sequence:   130
)    Alternate keystrokes: 130

This specifies the number of lines to leave blank
at the top of each page during printing or
pagination of the file in the current window. The
top margin is a default value that will be
overridden by Word Fugue format (.) commands
embedded in the text. The value you specify in
the prompt box is not stored in the document file.
It is a default value that exists only while the
file is being edited.
@131

&
SET BOTTOM MARGIN

    Keystroke sequence:   131
)    Alternate keystrokes: 131

This specifies the number of lines to leave blank
at the bottom of each page during printing or
pagination of the file in the current window. The
bottom margin is a default value that will be
overridden by Word Fugue format (.) commands
embedded in the text. The value you specify in
the prompt box is not stored in the document file.
It is a default value that exists only while the
file is being edited.
@132

&
SET PAGE LENGTH

    Keystroke sequence:   132
)    Alternate keystrokes: 132

This specifies the total number of lines on each
page during printing or pagination of the file in
the current window. The page length is a default
value that will be overridden by Word Fugue format
(.) commands embedded in the text. The value you
specify in the prompt box is not stored in the
document file. It is a default value that
exists only while the file is being edited.
@133

&
SET UNDO LIMIT

    Keystroke sequence:   133
)    Alternate keystrokes: 133

This specifies the maximum number of lines of
deleted text that will be stored in the Undo
buffer. If Undo limit is 10, and you delete 15
lines, the first five lines deleted will be lost.
Whenever lines are Undeleted, that space is
recovered for the undo buffer to reuse.
@134

&
TOGGLE TAB EXPANSION

    Keystroke sequence:   134
)    Alternate keystrokes: 134

When tab expansion is ON, any tabs encountered
upon read-in of a file are expanded into spaces,
using a tab spacing that you specify. If tab
expansion is OFF, Word Fugue leaves the tabs
intact. However, Word Fugue does not expand tabs
as it displays them, so these will be displayed
on the screen as 
I.
@135

&
SET FILE EXTENSION

    Keystroke sequence:   135
)    Alternate keystrokes: 135

If you edit many files with the same extension,
such as .DOC, you should enter that value for the
default extension. Word Fugue will automatically
supply the default extension whenever you respond
to a filename prompt without entering an
extension. The extension you enter should not
include a period or any DOS wildcards, and is
limited to three characters.
@136

&
SET TABS

    Keystroke sequence:   136
)    Alternate keystrokes: 136

The tab settings will be initialised based on the
contents of the current line of text. The start
of each blank-delimited word will set a tab at
that column. Any other tabs will be cleared. By
using this command in concert with the Put Tabs
command, you can store a custom tab line as part
of a document and easily use it later.

You can return to the default evenly spaced tabs
by activating the 
Options Tabs Restore even
menu selections.
@137

&
SET TAB SIZE

    Keystroke sequence:   137
)    Alternate keystrokes: 137

By default, a tab is placed after every eight
columns of text. This tab size is also used when
files containing tabs are read into Word Fugue.
Change the tab size and use the Restore even
command to initialise a different set of regularly
spaced tabs.
@138

&
PUT RULER LINE

    Keystroke sequence:   138
)    Alternate keystrokes: 138

The tab settings are stored into the current
window as a formatted text line. The line begins
with the Word Fugue formatting character (.), and
will be ignored during printing. Use this command
in concert with the Set tabs command to store
a custom tab line as part of a document for later
use.
@139

&
EDIT RULER

    Keystroke sequence:   139
)    Alternate keystrokes: 139

Tab positions can be interactively edited using
this command. The cursor will be moved to the
current window's tab line display. Use the cursor
keys or the tab key to move along the tab line.
Pressing the space bar will toggle a tab setting
on or off, pressing the <Ins> key will add a tab,
pressing the <Del> key will delete a tab at the
cursor position. Press <Enter> when editing is
complete, or <Esc> to undo any changes made.
@140

&
INDENT MARGIN

    Keystroke sequence:   140
)    Alternate keystrokes: 140

The current left margin will be moved to the right
by one tab stop. This is useful in making indented
lists. The temporary margin will remain in force
until you leave the current paragraph.

The temporary margin is indicated by a right
pointing arrow on the window tab display.
@141

&
FORMAT BLOCK

    Keystroke sequence:   141
)    Alternate keystrokes: 141

Paragraph formatting will be applied to all
lines of text in the currently marked block. The
block must be highlighted, and the cursor must be
somewhere within the block, or an error message
will be produced.
@142

&
FILE CLOSE

    Keystroke sequence:   142
)    Alternate keystrokes: 142

The current text window will be cleared. If it
has been modified since being saved to disk, you
will be given the opportunity to save it. The
window will then be closed. If the window is the
only one on the screen, you will return to the
Word Fugue menu system.
@143

&
SET MARKER

This command stores a record of the current cursor
position to which you can easily return later.
Word Fugue supports up to ten text markers, which
are labelled with the numbers 0-9 when they are
placed in the text. Shortcut commands for using
each of the ten markers are presented on a
following screen.

The text marker display writes over the character
where it is placed. It does not affect the actual
text, but merely hides it.
]

When a marker is set from the menu system, another
menu will appear showing which markers are already
in use. Redefining an existing marker erases the
previously stored position. Defining a marker at
the same position where it is currently located
has the effect of erasing it.

The following screen provides shortcut keystrokes
for setting text markers without using menus.
]

The following commands will set any of the
markers without using a menu.

)Marker 0   Main: 62    Alternate: 62
)Marker 1   Main: 63    Alternate: 63
)Marker 2   Main: 64    Alternate: 64
)Marker 3   Main: 65    Alternate: 65
)Marker 4   Main: 66    Alternate: 66
)Marker 5   Main: 67    Alternate: 67
)Marker 6   Main: 68    Alternate: 68
)Marker 7   Main: 69    Alternate: 69
)Marker 8   Main: 70    Alternate: 70
)Marker 9   Main: 71    Alternate: 71
@144

&
JUMP TO MARKER

This command moves the cursor to the position of a
previously stored text marker. If the marker has
not been set, an error will occur. Word Fugue
supports up to ten text markers, which are labelled
with the numbers 0-9 when they are placed in the
text.

When you jump to a marker from the menu system,
another menu will appear showing which markers
have previously been set.

The following screen provides shortcut keystrokes
for jumping to text markers without using menus.
]

The following commands will jump to any of the
markers without using a menu.

)Marker 0   Main: 72    Alternate: 72
)Marker 1   Main: 73    Alternate: 73
)Marker 2   Main: 74    Alternate: 74
)Marker 3   Main: 75    Alternate: 75
)Marker 4   Main: 77    Alternate: 77
)Marker 5   Main: 77    Alternate: 77
)Marker 6   Main: 78    Alternate: 78
)Marker 7   Main: 79    Alternate: 79
)Marker 8   Main: 80    Alternate: 80
)Marker 9   Main: 81    Alternate: 81
@145

&
SET PAGING AMOUNT

    Keystroke sequence:   145
)    Alternate keystrokes: 145

This command will set the Page Up and Page Down amount to
)
)   Page - move a full screen page at a time
)   Half - move only half a screen page at a time
)    Csr - move so that cursor is at top or bottom of
)            screen or a full screen page if it is already
)            there

@146

&
TOGGLE FIXED TABS

    Keystroke sequence:   146
)    Alternate keystrokes: 146

When fixed tabs are ON, tab positions are taken
from a table of columns that you can set to even
spacing or customise through various tab
commands. When fixed tabs are OFF, tab positions
are based on the contents of the text line above
the current line, just like the Turbo Pascal
editor.
@147

&
SET TEMPORARY MARGIN

    Keystroke sequence:   147
)    Alternate keystrokes: 147

The current cursor column will be assigned as the
temporary left margin. If the cursor is beyond the
right margin, an error will occur.
@148

&
SET HOME DIRECTORY

    Keystroke sequence:   148
)    Alternate keystrokes: 148

Word Fugue uses several files in its operation.
These contain the current printer definition,
default macros, the overlay file, and this help file. In order to
run Word Fugue from a drive or directory other than
where these files are located, you will need to
set up a Home Directory. The home directory
specifies the location of the optional Word Fugue
support files on your system.
]
The overlay file WF.OVR 
must always be available,
and should be kept in that directory.

The following files should be kept in that
directory:

)  WF.HLP   WF.MAC   *.PDF

Word Fugue will operate without the use of these
files, but in that case certain program features
will not be available.

After the home directory is set, it can be saved
with Word Fugue's Save Setup command.
@149

&
TOGGLE HI-BIT STRIP

    Keystroke sequence:   149
)    Alternate keystrokes: 149

When Hi-bit strip is ON, the most significant bit
of each character read from the disk will be set
to zero. This is useful when reading in files
previously generated in WordStar document mode.
Note that stripping the high
bit will also affect any usage of the IBM extended
ASCII character set, such as the line drawing
characters.

Note that a block can be stripped later by use of
command 194 or 194
@150

&
EDIT MACRO

    Keystroke sequence:   150
)    Alternate keystrokes: 150

Macros recorded within Word Fugue can be edited on
a character by character basis using the built-in
macro editor.

First, a prompt box will ask for a new name for
the macro, which you can accept as is, or change.
]

The macro will appear in another window. It can
be edited using the cursor keys, and the <Del>
or <Backspace> keys. Most characters you type will
be inserted literally into the macro. <CtrlBksp>
will delete the macro. <Enter> will end the
session in the macro editor. <Esc> will undo any
changes made to the macro. In case you need to
enter any of these special keys as part of the
macro, press the <ScrollLock> key to enter
Literal mode. In this mode, all keystrokes will
be inserted into the macro without any
interpretation.
@151

&
WRITE FILE AS

    Keystroke sequence:   151
)    Alternate keystrokes: 151

This command will store all text in the current
window to any file that you name. When you are
editing in a window that has not previously been
named, you can use this command to assign a name
to the window. Using it in an already named window
will cause the name of that window, and all other
windows sharing the same text stream, to be
updated to the new name.
@152

&
TOGGLE KEY HELP

    Keystroke sequence:   152
)    Alternate keystrokes: 152

When Key Help is ON, Word Fugue will display the
command sequences that correspond to each menu
selection while you are browsing through the menu
system. This can serve to familiarise you with
the quick keystrokes and speed up your editing.
@153

&
PREVIOUS WINDOW

    Keystroke sequence:   153
)    Alternate keystrokes: 153

The cursor will be moved to the current position
in the next window up the screen. If the cursor is
already in the topmost window, it will move to the
bottom window. If there is only one window,
nothing will happen.
@154

&
NEXT SENTENCE

    Keystroke sequence:   154
)    Alternate keystrokes: 154

The cursor will be moved to the beginning of the
next sentence. Sentences are delimited by periods,
semicolons, and other common punctuation marks, as
well as by blank lines and lines beginning with
the Word Fugue format character (.).
@155

&
PREVIOUS SENTENCE

    Keystroke sequence:   155
)    Alternate keystrokes: 155

The cursor will be moved to the beginning of the
previous sentence. Sentences are delimited by
periods, semicolons, and other common punctuation
marks, as well as by blank lines and lines
beginning with the Word Fugue format character (.).
@156

&
RESTORE EVEN TABS

    Keystroke sequence:   156
)    Alternate keystrokes: 156

Tabs will be set on an even spacing as determined
by the current default tab spacing. Any other tab
settings will be cleared.
@157

&
WHICH FONT

    Keystroke sequence:   157
)    Alternate keystrokes: 157

Word Fugue will display the font type of the
character at the cursor position. If the
character has more than one font applied to it,
Word Fugue will list all of them.
@158

&
SELECT BOLD

    Keystroke sequence:   158
)    Alternate keystrokes: 158

Word Fugue will place the Toggle Bold control character
(<CtrlB>) at the current cursor position, and position the
cursor at
the next position. Thus, newly entered text will be in the
selected typeface.
@159

&
SELECT DOUBLESTRIKE

    Keystroke sequence:   159
)    Alternate keystrokes: 159

Word Fugue will place the Toggle Double-strike control character (<CtrlD>)
at the current cursor position, and position the cursor at
the next position. Thus, newly entered text will be in the
selected typeface.

If the cursor is inside a marked block, the block will have
a font control character placed at each end of the block instead.

@160

&
SELECT UNDERSCORE

    Keystroke sequence:   160
)    Alternate keystrokes: 160

Word Fugue will place the Toggle
Underscore control character (<CtrlS>)
at the current cursor position, and position the cursor at
the next position. Thus, newly entered text will be in the
selected typeface.

If the cursor is inside a marked block, the block will have
a font control character placed at each end of the block instead.



@161

&
SELECT SUPERSCRIPT

    Keystroke sequence:   161
)    Alternate keystrokes: 161

Word Fugue will place the Toggle
Superscript control character (<CtrlT>)
at the current cursor position, and position the cursor at
the next position. Thus, newly entered text will be in the
selected typeface.

If the cursor is inside a marked block, the block will have
a font control character placed at each end of the block instead.


@162

&
SELECT SUBSCRIPT

    Keystroke sequence:   162
)    Alternate keystrokes: 162

Word Fugue will place the Toggle
Subscript control character (<CtrlV>) at the
current cursor position, and position the cursor at
the next position. Thus, newly entered text will be in the
selected typeface.

If the cursor is inside a marked block, the block will have
a font control character placed at each end of the block instead.


@163

&
SELECT COMPRESSED

    Keystroke sequence:   163
)    Alternate keystrokes: 163

Word Fugue will place the Toggle
Alternate 1 control character (<CtrlA>) at the current cursor
position, and position the cursor at the next position.
Thus, newly entered text will be in the selected typeface.

If the cursor is inside a marked block, the block will have
a font control character placed at each end of the block instead.


@164

&
SELECT ITALICS

    Keystroke sequence:   164
)    Alternate keystrokes: 164

Word Fugue will place the Toggle Alternate 2 control
character (<CtrlY>) at the current cursor position, and
position the cursor at the next position.
Thus, newly entered text will be in the selected typeface.

If the cursor is inside a marked block, the block will have
a font control character placed at each end of the block instead.


@165

&
TOGGLE SNOW CONTROL

    Keystroke sequence:   165
)    Alternate keystrokes: 165

When Snow Control is ON, Word Fugue avoids the
screen interference patterns called "snow" that
are produced by certain display adaptors, notably
the IBM Colour Graphics Adaptor. For other colour
adaptors, the Snow Control can be turned off. This
improves screen updating performance considerably.

@166

&
TOGGLE BLOCK CURSOR

    Keystroke sequence:   166
)    Alternate keystrokes: 166

Word Fugue offers a choice between a blinking
hardware cursor and a solid unblinking cursor.
The colour of the block cursor can be set via the

Options Colours menu.

This Block Cursor can be very useful on Lap Top PCs.
@167

&
DISPLAY SIZE

    Keystroke sequence:   167
)    Alternate keystrokes: 167

Depending upon the type of Video adaptor you have
installed, Word Fugue can display more text than the
normal 25 lines by 80 columns.

On computers equipped with an Enhanced Graphics
Adaptor, Word Fugue can display 43 lines on the
screen.

On computers equipped with VGA, Word Fugue can display 50
or 28 lines on the screen. In addition, some VGA cards
support extended 132 column mode, or 60 line mode.

Computers with any type of colour card can support a 40
column mode that results in large printing suitable for
those with reading difficulties.

Before trying exotic screen sizes, please save ALL your documents.
Exotic screen sizes are 
non standard, and are not supported by all
cards.
@168

&
MARGIN RELEASE

    Keystroke sequence:   168
)    Alternate keystrokes: 168

Setting Margin Release ON allows you to type
beyond the left and right margins while Word Wrap
mode is active. Margin release remains effective
until the cursor is moved to another line. It can
also be toggled off at any time.
@169

&
SPELL CHECK

    Keystroke sequence:   169
)    Alternate keystrokes: 169

Word Fugue will spell check any of your documents
using its own dictionary WF_MAIN.LEX. This contains
approximately 110,000 words. It also checks against an
auxiliary dictionary if it finds one.

Word Fugue checks the document in the current
screen window. By default, checking proceeds from
the current cursor position to the end of the
file. If a block is marked and visible, only that
block will be checked.
]
Word Fugue also contains a small built-in dictionary of
the 500 most commonly used English words. This
dictionary is kept in memory at all times in order
to accelerate the checking process.

Once the operation begins, Word Fugue keeps you
advised of its progress on the status line. The
line and column counters tell you what part of the
document is being checked, as does the percentage
indicator. These are updated each time a new word
is checked.
]
When Word Fugue finds a word that it does not
recognise, the screen will be updated to highlight
the word, and a popup menu will ask you to select
an option. Select by moving the bar and pressing
<Enter> or by pressing the first character of any
of the options:

)  
Skip once
)    Ignore the spelling of this word in only this
)    one instance.
)  
Ignore for this document
)    Ignore the spelling of this word for the
)    duration of the check.
]

)  
List dictionary sound alikes
)    Display a list of sound alike words from
)    Word Fugue's dictionary. Select one and press
)    <Enter>, or press <Esc> to return to the
)    previous menu.
)  
Edit from the keyboard
)    A prompt box will appear to allow interactive
)    editing of the word. Press <Enter> to accept,
)    or <Esc> to return to the previous menu.
)    Word Fugue will recheck the word after you
)    finish editing it.
]

)  
Mark with "~"
)    Place a tilde in front of the word. After
)    the document has been checked, you can use
)    the Find Pattern command to locate the marked
)    words.
)  
Add to dictionary
)    Add the word to Word Fugue's auxiliary
)    dictionary (WF_AUX.DIC). A secondary
)    menu of case selections will appear. Press
)    <Esc> to return to the previous menu, or
)    <Enter> to add to the dictionary.
]

)  
Batch mark rest of document
)    Cancel the interactive mode normally used
)    for spell checking. From this point on, all
)    unrecognised words are marked with tildes
)    (~).

A spell checking operation may be stopped by
pressing <Esc> at the corrections menu (once a
misspelling is found) or by pressing any key while
a file is being checked. In the latter case, a
prompt box will be displayed, asking if you want
to stop. Press Y to stop, N to continue.
]

The main dictionary should reside in the same directory as
Word Fugue itself, otherwise Word Fugue may not be
able to find it.

)The auxiliary dictionary should reside in the same directory
as the file you are spell checking. If Word Fugue does not find
it, it will create it if you request to add a word to the
dictionary.

)There is a limit on the size of the auxiliary dictionary -
it may not be larger than about 65,500 characters,
and also cannot be larger than available memory.
If it gets too large, you should look at adding the words in it to the
main dictionary. See next page.
]
)The words in the auxiliary dictionary may be applied to the
main dictionary by using the program WFLEXMGR. This program will
either Add or Delete words from the dictionary, depending upon
the input on its screen. It will write a new dictionary, so as
not to destroy the old one if things go wrong. Make sure you have
enough disk space for 2 copies! You may allocate the new dictionary
on another drive or directory.

)The change file should have one word per line (like the auxiliary
dictionary). It does not matter whether the words are in upper or
lower case - they will be converted to lower case and sorted by the
update program.

@170

&
EXPAND INCLUDE FILE

    Keystroke sequence:   170
)    Alternate keystrokes: 170

When you use .FI commands, the files can be opened for editing by
simply placing the cursor on the line and pressing this command. If
there is sufficient memory, and a window is available, the file will
be opened in another window, and you will be positioned in the new
window. You can expand further .FI commands, as long as there is
sufficient memory and available windows. .FI commands can be nested up
to 5 deep.
@171

&
TOGGLE TAB WRITING

    Keystroke sequence:   171
)    Alternate keystrokes: 171

By default, Word Fugue does not write tab
characters in files saved from the editor. If Tab
Writing is activated, Word Fugue will translate
sequences of spaces to tabs in order to save disk
space for the output file. Tabs are computed using
the fixed spacing currently set for fixed tabs.
Multiple spaces found within pairs of single or
double quotes (as used in Pascal or C source code)
will not be converted to tabs.

Tab writing is saved as a Word Fugue default.
@172

&
TOGGLE WRAP COMPRESSION

    Keystroke sequence:   172
)    Alternate keystrokes: 172

By default, Word Fugue compresses padding out
of any line before it is wrapped. This feature is
required in order to "unjustify" text that has
previously been right justified. Only "padding" inserted
by Word Fugue will be removed - normal spaces will not be
touched.

When this toggle is OFF, padding will not be
removed from lines being wrapped. Wrap
compression is saved as one of Word Fugue's defaults.
Padding may be displayed by changing the Display option
"Visible Padding" to ON

@173

&
TOGGLE INITIAL ZOOM STATE

    Keystroke sequence:   173
)    Alternate keystrokes: 173

The state of this toggle determines Word Fugue's
default behaviour when more than one window is on
the screen. When Initial Zoom State is OFF,
multiple windows will appear simultaneously on
the screen, that is, they will not be zoomed.

When Initial Zoom State is ON, multiple windows
will be zoomed. The last file opened will be
visible on the screen, and others will be hidden
behind it.

Initial Zoom State is saved as a Word Fugue
default.

The normal zoom window command may be used at any
time, regardless of Initial Zoom State.
@174

&
HELP SUMMARY  (<F1> from Help menu)

Word Fugue provides help in several ways. This
section describes how to use the help system.

Whenever the Word Fugue help system is on screen,
you can use the <PgUp> and <PgDn> keys to
move from one screen to another. <Home> and
<End> will take you to the first and last pages
of the section. Press <Esc> when you are done
using help.
]

The Word Fugue menu system is available at any
time by pressing 198. Most of Word Fugue's
commands may be selected from the menus. Within
the menu system, you may activate "Key help" by
choosing 
Setup Display options Key help. With
Key help activated, the quick keystrokes that
activate each command will be displayed on the top
row of the screen while the selection bar is
positioned over that menu item.

Pressing <F1> while within the Word Fugue menu
system or within any prompt box will bring up a
window containing more detailed help regarding the
selected command. Pressing 174 while you are
entering text will bring up a menu of help topics.
]

&
Help and Status Keystrokes

)Show help menu
)    Main: 174    Alternate: 174
)Show help summary
)    Main: <F1> from the help menu
)Activate menu system
)    Main: 198    Alternate: 198
)Show system and file information
)    Main: 104    Alternate: 104
)Show available memory
)    Main: 105    Alternate: 105
@175

&
ABOUT WORD FUGUE

Word Fugue is a Shareware program, and is supplied on
that basis. If you use it, please register by
sending $A80 + $10 for postage (Overseas add $A20 airmail postage) to:
)    Fugue Software
)       P.O. Box 425
)       CAPALABA  QLD  4157
)       AUSTRALIA
)You will receive the latest version of the program,
plus the full dictionary for spell checking, the
dictionary update program and the manual. You will also be placed
on our mailing list for future updates.
]
You are free to distribute this program to anyone you
wish, provided you do not tamper with the files, and distribute all
the files. We retain copyright to the program, but we are responsive
to any suggestions you may have about our programs. We are committed
to providing good software for the price of a textbook. The
registration fee will help us to continue to develop it. Help us to
stamp out the Commercial Software Rip-Off.

Support your Shareware Authors and register today!

@176

&
BLOCK COMMANDS

Begin block
)    Main: 52    Alternate: 52
)End block
)    Main: 53    Alternate: 53
)Start of block
)    Main: 54    Alternate: 54
)End of block
)    Main: 55    Alternate: 55
)Copy block
)    Main: 56    Alternate: 56
)Move block
)    Main: 57    Alternate: 57
)Delete block
)    Main: 58    Alternate: 58
)Hide block
)    Main: 59    Alternate: 59
)Mark current word
)    Main: 60    Alternate: 60
)Write block to file
)    Main: 44    Alternate: 44
)Shift Block Left
)    Main: 192    Alternate: 192
)Shift Block Right
)    Main: 193    Alternate: 193
)Strip Hi Bits from block
)    Main: 194    Alternate: 194

@177

&
CURSOR MOVEMENT

Character left
)    Main: 0    Alternate: 0
)Character right
)    Main: 1    Alternate: 1
)Word left
)    Main: 2    Alternate: 2
)Word right
)    Main: 3    Alternate: 3
)Line up
)    Main: 4    Alternate: 4
)Line down
)    Main: 5    Alternate: 5
)Scroll up
)    Main: 6    Alternate: 6
)Scroll down
)    Main: 7    Alternate: 7
)Page up                    Amount defaults to full Page
)    Main: 9    Alternate: 9
)Page down                  but can be set to Half or Csr
)    Main: 8    Alternate: 8
)Top of file
)    Main: 10    Alternate: 10
)Bottom of file
)    Main: 11    Alternate: 11
)Beginning of line
)    Main: 12    Alternate: 12
)End of line
)    Main: 13    Alternate: 13
)Top of screen
)    Main: 14    Alternate: 14
)Bottom of screen
)    Main: 15    Alternate: 15
@178

&
FILES

Edit another file
)    Main: 40    Alternate: 40
)Abandon file
)    Main: 41    Alternate: 41
)Read file into window
)    Main: 42    Alternate: 42
)Save and continue edit
)    Main: 43    Alternate: 43
)Save and exit to DOS
)    Main: 45    Alternate: 45
)Write to named file
)    Main: 151    Alternate: 151
)Save/Switch files
)    Main: 48    Alternate: 48
)Expand Include File
)    Main: 170    Alternate: 170
@179

&
GO TO MOVEMENT COMMANDS

Go to line
)    Main: 18    Alternate: 18
)Go to column
)    Main: 19    Alternate: 19
)Go to page
)    Main: 129    Alternate: 129
)Go to window
)    Main: 20    Alternate: 20
)Previous cursor position
)    Main: 21    Alternate: 21
)Up to equal indent
)    Main: 16    Alternate: 16
)Down to equal indent
)    Main: 17    Alternate: 17
)Next sentence
)    Main: 154    Alternate: 154
)Previous sentence
)    Main: 155    Alternate: 155
]

&
Text Markers

Set a marker by menu
)    Main: 143    Alternate: 143
)Jump to marker by menu
)    Main: 144    Alternate: 144
)Toggle marker display
)    Main: 61    Alternate: 61
)Set marker 0
)    Main: 62    Alternate: 62
)Set marker 1
)    Main: 63    Alternate: 63
)Set marker 2
)    Main: 64    Alternate: 64
)Set marker 3
)    Main: 65    Alternate: 65
)Set marker 4
)    Main: 66    Alternate: 66
)Set marker 5
)    Main: 67    Alternate: 67
)Set marker 6
)    Main: 68    Alternate: 68
)Set marker 7
)    Main: 69    Alternate: 69
)Set marker 8
)    Main: 70    Alternate: 70
)Set marker 9
)    Main: 71    Alternate: 71
)Jump marker 0
)    Main: 72    Alternate: 72
)Jump marker 1
)    Main: 73    Alternate: 73
)Jump marker 2
)    Main: 74    Alternate: 74
)Jump marker 3
)    Main: 75    Alternate: 75
)Jump marker 4
)    Main: 76    Alternate: 76
)Jump marker 5
)    Main: 77    Alternate: 77
)Jump marker 6
)    Main: 78    Alternate: 78
)Jump marker 7
)    Main: 79    Alternate: 79
)Jump marker 8
)    Main: 80    Alternate: 80
)Jump marker 9
)    Main: 81    Alternate: 81
@180

&
TEXT INSERTION AND DELETION

Undo last deletion
)    Main: 22    Alternate: 22
)Restore line
)    Main: 23    Alternate: 23
)Insert undo buffer
)    Main: 116    Alternate: 116
)Tab
)    Main: 24    Alternate: 24
)Backward Tab
)    Main: 39    Alternate: 39
)New line
)    Main: 26    Alternate: 26
)Insert line
)    Main: 27    Alternate: 27
)Insert control character
)    Main: 25    Alternate: 25
)Delete current character
)    Main: 28    Alternate: 28
)Delete character left
)    Main: 29    Alternate: 29
)Delete word
)    Main: 30    Alternate: 30
)Delete to end of line
)    Main: 31    Alternate: 31
)Delete line
)    Main: 32    Alternate: 32
)Delete line (no undo)
)    Main: 33    Alternate: 33
)Abort command (1 char)
)    Main: 253    Alternate: 253
@181

&
Function Keys

|

@182
&
Macros

Load macros from disk
)    Main: 82    Alternate: 82
)Store macros to disk
)    Main: 83    Alternate: 83
)Record macro
)    Main: 84    Alternate: 84
)Edit macro
)    Main: 150    Alternate: 150
)Playback macro by menu
)    Main: 96     Alternate: 96
)Playback macro by key
)    Main: 95     Alternate: 95
)      follow with character 0..9 A..Z
)Playback Macro 1
)    Main: 85    Alternate: 85
)Playback Macro 2
)    Main: 86    Alternate: 86
)Playback Macro 3
)    Main: 87    Alternate: 87
)Playback Macro 4
)    Main: 88    Alternate: 88
)Playback Macro 5
)    Main: 89    Alternate: 89
)Playback Macro 6
)    Main: 90    Alternate: 90
)Playback Macro 7
)    Main: 91    Alternate: 91
]
)Playback Macro 8
)    Main: 92    Alternate: 92
)Playback Macro 9
)    Main: 93    Alternate: 93
)Playback macro n times with menu
)    Main: 94    Alternate: 94
)
)There are a number of macro files supplied:
)
) WF.MAC   - standard word processing functions
) DOUBLE.MAC & SINGLE.MAC - line drawing
) GREEK.MAC & EUROPE.MAC - character sets
) MISC.MAC    - other characters
]
@183

&
Options and Toggles

Toggle insert mode
)    Main: 106    Alternate: 106
)Toggle autoindent mode
)    Main: 107    Alternate: 107
)Toggle word wrap
)    Main: 113    Alternate: 113
)Toggle wrap compression
)    Main: 172    Alternate: 172
)Toggle ruler line display
)    Main: 115    Alternate: 115
)Toggle justify
)    Main: 117    Alternate: 117
)Toggle page breaks
)    Main: 118    Alternate: 118
)Toggle attributes
)    Main: 119    Alternate: 119
)Toggle fixed tabs
)    Main: 146    Alternate: 146
)Toggle hi-bit strip
)    Main: 149    Alternate: 149
)Toggle tab expansion
)    Main: 134    Alternate: 134
)Toggle tab writing
)    Main: 171    Alternate: 171
)Toggle key help
)    Main: 152    Alternate: 152
)Toggle snow check
)    Main: 165    Alternate: 165
)Toggle block cursor
)    Main: 166    Alternate: 166
)Toggle 43 line mode
)    Main: 167    Alternate: 167
)Set left margin
)    Main: 114    Alternate: 114
)Set right margin
)    Main: 111    Alternate: 111
)Set top margin
)    Main: 130    Alternate: 130
)Set bottom margin
)    Main: 131    Alternate: 131
)Set page length
)    Main: 132    Alternate: 132
)Set undo limit
)    Main: 133    Alternate: 133
)Set default file extension
)    Main: 135    Alternate: 135
)Set colours
)    Main: 121    Alternate: 121
)Set home directory
)    Main: 148    Alternate: 148
)Save setup
)    Main: 122    Alternate: 122
)Set Paging Amount
)    Main: 145    Alternate: 145
@184

&
Printing a file

)    Main: 123    Alternate: 123

&
Print Formatting Commands

Offset page to right by n columns
)      .PO nn   or .PO odd nn   or .PO even nn
)Start new page
)      .PA
)Start new page if fewer than n lines remain
)      .CP n
)Start new page if current page is Odd or Even
)      .CP O or E
)Print a blank page if page number is Odd or Even
and start a new page otherwise. Optionally print TEXT in the
middle of the blank page
)      .PB O or E   TEXT TO PRINT ON BLANK PAGE
)Set page number to n
)      .PN n
)Omit page numbers
)      .OP
)Print page numbers
)      .PG
)Put page number in column n
)      .PC n
)Set page length to n lines
)      .PL n
]Set top margin to n lines
)      .MT n
)Set bottom margin to n lines
)      .MB n
)Set header margin to n lines
)      .HM n
)Set footer margin to n lines
)      .FM n
)Define header lines
)      .HE header line 1   }  both the
)      .H1 header line 1   }  same
)      .H2 header line 2
)      .H3 header line 3
)Define footer lines
)      .FO footer line 1   } both the
)      .F1 footer line 1   } same
)      .F2 footer line 2
)      .F3 footer line 3
)Define Index Entry
)      .IXline
)   or <Ctrl>P<Ctrl>K at start
)   and <Ctrl>P<Ctrl>K at end
)
)Define Table Of Contents Entry
)      .TCline
)   or .TC1 for table 1
)   thru to .TC9 for table 9
)
)Include a file at this point
)   .FIfilename comments
)   filename is terminated by a space, and
)   any further text is comment
]

&
Special Codes within Headers and Footers

Insert current page number
)      #
)Ignore following spaces on even pages
)      <CtrlK>
)Take next character literally
)      \
)Invoke printing functions
)      @
)   eg  @Dn for dates, n = 0 .. 8
)       @Tn for times, n = 0 .. 3
]

&
Special Print @functions within Headers & Footers

)  - return the time in format:
)  @T0   HH:MM
)  @T1   HH:MM:SS
)  @T2   HH:MM XX     where XX = AM or PM
)  @T3   HH:MM:SS XX  where XX = AM or PM
)
) - return the name of the file being printed:
)  @F0  full path name drive:\path\filename.ext
)  @F1  filename.ext
]
)  - return the date in format:
)  @D0  MMM DD, YYYY
)  @D1  DD/MM/YY
)  @D2  DD/MM/YYYY
)  @D3  MM/DD/YY
)  @D4  MM/DD/YYYY
)  @D5  YYYY/MM/DD
)  @D6  DD MMM YYYY
)  @D7  dayname, DD MMM YYYY
)  @D8  DD month YYYY
]

&
Typeface Selection Commands

)Select Bold
)    Main: 158    Alternate: 158
)Select DoubleStrike
)    Main: 159    Alternate: 159
)Select Underscore
)    Main: 160    Alternate: 160
)Select Superscript
)    Main: 161    Alternate: 161
)Select Subscript
)    Main: 162    Alternate: 162
)Select Compressed
)    Main: 163    Alternate: 163
)Select Italics
)    Main: 164    Alternate: 164
]

&
Typeface Control Codes

Each of these must be prefixed with the
Control Char insertion code 25 (or 25)
)
)Toggle Boldface
)      <CtrlB>
)Toggle Underscore
)      <CtrlS>
)Toggle Doublestrike
)      <CtrlD>
)Toggle Superscript
)      <CtrlT>
)Toggle Subscript
)      <CtrlV>
)Toggle Compressed
)      <CtrlA>
)Toggle Italic
)      <CtrlY>
]

&
Printer Definitions

Each type of printer is described to Word Fugue by
a small file with the extension PDF. This file
contains information regarding the control codes
that enable the printer's various fonts, as well
as some additional information that tells
Word Fugue about the printer.

Existing PDF files can be changed, and new ones
created via the 
Word Fugue Printer definition
menu. The printer definition most recently
selected via the 
File Print menu can be modified
here. Choose 
Edit string to change the control
code for any supported font. Each font is
associated with two strings - one to turn the font
ON, and another to turn it OFF.

When you choose a string to edit, it appears in
another window. It can be edited using the cursor
keys, and the <Del> or <Backspace> keys. Most
characters you type will be inserted literally
into the string. <CtrlBksp> will delete the
existing string. <Enter> will end the session
in the string editor. In case you need to enter
any of these special keys as part of the control
string, press the <ScrollLock> key to enter
Literal mode. In this mode, all keystrokes will be
inserted into the string without further
interpretation.

You are also given the option of changing the name
of the string.

The current printer definition can be saved to a
disk file by using the 
Save definition menu
selection. A prompt box will ask for the name of
the file to be saved.
@185

&
Search and Replace

Search for pattern
)    Main: 34    Alternate: 34
)Search and replace
)    Main: 35    Alternate: 35
)Search and playback macro
)    Main: 36    Alternate: 36
)Search again
)    Main: 37    Alternate: 37
)Find matching }]>) or End
)    Main: 191   Alternate: 191
@186

&
Rulers & Tabs

)Tab
)    Main: 24    Alternate: 24
)Backward Tab
)    Main: 39    Alternate: 39
)Set tabs
)    Main: 136    Alternate: 136
)Put tabs
)    Main: 138    Alternate: 138
)Set tab size
)    Main: 137    Alternate: 137
)Edit Ruler
)    Main: 139    Alternate: 139
)Tab temporary margin
)    Main: 140    Alternate: 140
)Set temporary margin
)    Main: 147    Alternate: 147
)Restore even tabs
)    Main: 156    Alternate: 156
@187

&
SPELL CHECK

    Keystroke sequence:   169
)    Alternate keystrokes: 169

Word Fugue will spell check any of your documents
using its own dictionary WF_MAIN.LEX. This contains
approximately 110,000 words. It also checks against an
auxiliary dictionary if it finds one.

Word Fugue checks the document in the current
screen window. By default, checking proceeds from
the current cursor position to the end of the
file. If a block is marked and visible, only that
block will be checked.
]
Word Fugue also contains a small built-in dictionary of
the 500 most commonly used English words. This
dictionary is kept in memory at all times in order
to accelerate the checking process.

Once the operation begins, Word Fugue keeps you
advised of its progress on the status line. The
line and column counters tell you what part of the
document is being checked, as does the percentage
indicator. These are updated each time a new word
is checked.
]
When Word Fugue finds a word that it does not
recognise, the screen will be updated to highlight
the word, and a popup menu will ask you to select
an option. Select by moving the bar and pressing
<Enter> or by pressing the first character of any
of the options:

)  
Skip once
)    Ignore the spelling of this word in only this
)    one instance.
)  
Ignore for this document
)    Ignore the spelling of this word for the
)    duration of the check.
]

)  
List dictionary sound alikes
)    Display a list of sound alike words from
)    Word Fugue's dictionary. Select one and press
)    <Enter>, or press <Esc> to return to the
)    previous menu.
)  
Edit from the keyboard
)    A prompt box will appear to allow interactive
)    editing of the word. Press <Enter> to accept,
)    or <Esc> to return to the previous menu.
)    Word Fugue will recheck the word after you
)    finish editing it.
]

)  
Mark with "~"
)    Place a tilde in front of the word. After
)    the document has been checked, you can use
)    the Find Pattern command to locate the marked
)    words.
)  
Add to dictionary
)    Add the word to Word Fugue's auxiliary
)    dictionary (WF_AUX.DIC). A secondary
)    menu of case selections will appear. Press
)    <Esc> to return to the previous menu, or
)    <Enter> to add to the dictionary.
]

)  
Batch mark rest of document
)    Cancel the interactive mode normally used
)    for spell checking. From this point on, all
)    unrecognised words are marked with tildes
)    (~).

A spell checking operation may be stopped by
pressing <Esc> at the corrections menu (once a
misspelling is found) or by pressing any key while
a file is being checked. In the latter case, a
prompt box will be displayed, asking if you want
to stop. Press Y to stop, N to continue.
]

The main dictionary should reside in the same directory as
Word Fugue itself, otherwise Word Fugue may not be
able to find it.

)The auxiliary dictionary should reside in the same directory
as the file you are spell checking. If Word Fugue does not find
it, it will create it if you request to add a word to the
dictionary.

)There is a limit on the size of the auxiliary dictionary -
it may not be larger than about 65,500 characters,
and also cannot be larger than available memory.
If it gets too large, you should look at adding the words in it to the
main dictionary. See next page.
]
)The words in the auxiliary dictionary may be applied to the
main dictionary by using the program WFLEXMGR. This program will
either Add or Delete words from the dictionary, depending upon
the input on its screen. It will write a new dictionary, so as
not to destroy the old one if things go wrong. Make sure you have
enough disk space for 2 copies! You may allocate the new dictionary
on another drive or directory.

)The change file should have one word per line (like the auxiliary
dictionary). It does not matter whether the words are in upper or
lower case - they will be converted to lower case and sorted by the
update program.

@188

&
Text Formatting

Format paragraph
)    Main: 112    Alternate: 112
)Format block
)    Main: 141    Alternate: 141
)Centre line
)    Main: 120    Alternate: 120
)Right Flush line
)    Main: 222    Alternate: 222
)Margin release
)    Main: 168    Alternate: 168
)Toggle case
)    Main: 108    Alternate: 108
)Lower case
)    Main: 109    Alternate: 109
)Upper case
)    Main: 110    Alternate: 110
)Show current font
)    Main: 157    Alternate: 157
)Select Bold
)    Main: 158    Alternate: 158
)Select Double
)    Main: 159    Alternate: 159
)Select Underscore
)    Main: 160    Alternate: 160
)Select Superscript
)    Main: 161    Alternate: 161
)Select Subscript
)    Main: 162    Alternate: 162
)Select Compressed
)    Main: 163    Alternate: 163
)Select Italics
)    Main: 164    Alternate: 164
@189

&
Utility Commands

Print file
)    Main: 123    Alternate: 123
)Change active directory
)    Main: 127    Alternate: 127
)Directory
)    Main: 128    Alternate: 128
)Operating system
)    Main: 38    Alternate: 38
@190

&
Windows

Open file
)    Main: 46    Alternate: 46
)Close window
)    Main: 142    Alternate: 142
)Resize window
)    Main: 47    Alternate: 47
)Next window
)    Main: 49    Alternate: 49
)Previous window
)    Main: 153    Alternate: 153
)Zoom window
)    Main: 51    Alternate: 51
@191

&
Find Matching Bracket

Main: 191 Alternate: 191

Place the cursor on 
({[< and press the command.
The cursor will be positioned on the matching 
>]})
or you will receive an error message if none can be
found. Also, if you place the cursor on the 
B of 
begin
and Word Fugue will find the matching 
end for you.
@192

&
Shift Block Left

Main: 192  Alternate: 192

If you have a block of text marked, this command will
shift the block left the number of characters you nominate.
You will be prompted for the number. Characters shifted
left past position 1 will be lost.
@193

&
Shift Block Right

Main: 193  Alternate: 193

If you have a block of text marked, this command will
shift the block right the number of characters you nominate.
You will be prompted for the number. As characters are
shifted right, spaces are inserted at the beginning
of the line.
@194

&
Strip Hi Bits From Block

main: 194   Alternate: 194

If perhaps you import a block from a Wordstar file,
you have a block of text showing graphics characters
in with the words. This command will turn off the
hi bits in the marked block, and restore the graphics
characters to letters.

Refer also to the 
Strip Hi Bits toggle in the

Load File options of the 
Options menu.
@195

&
File Management Commands

From this display, the following commands are available:

)       
F1 - Display this screen
)       
F2 - Rename highlighted file
)       
F3 - Delete highlighted file
)       
F4 - Sort display by file name
)       
F5 - Sort display by file date
)       
F6 - Sort display by file extension
)       
F7 - Sort display by file size
)       
F8 - Edit the description for highlighted file
)    
Enter - Select the highlighted file
@196

&
Table Of Contents Generation

main: 196   Alternate: 196

You must have marked table of contents entries in
your text with

)      
.TCline
)   or 
.TC1 for table 1
)   thru to 
.TC9 for table 9

This will place the entries in one of nine files
depending on the number following the 
.TC characters.
If you omit the number, it defaults to 0. You will be
prompted for the name of the document. Each table of
contents file will have the document name, with the extension
set to

)   
.TOC for the .TC lines
)   
.TO1 for .TC1 lines
)   thru to 
.TO9 for .TC9 lines

If a table is not selected, there will not be a file
generated for it.

The entries in the file will appear exactly as they
appear following the .TC characters. Use 
# if you want
the page number to appear as part of the entry.
]
for example, if you enter this on page 1

)
.TC  DEFINITION .......................#

) and this on page 3

)
.TC     Default Definitions............#
)
.TC1  Figure 1  .......................#

the following entries will be generated in the table of
contents .TOC file

)
  DEFINITION .......................1
)
     Default Definitions............3

and the following in the .TO1 file


  Figure 1  .......................3
@197

&
Generate Index

main: 197   Alternate: 197

An index is an alphabetic listing of topics, words
and phrases accompanied by page numbers for each topic.
Word Fugue can automatically create an index for a
document.

You mark index entries by pressing 
^PK at the beginning
and end of each phrase you want included in the index.
You can also mark a phrase by using the dot command 
.IX
followed by the word or phrase.

You will be prompted for the name of the file to
generate the index for. This index will have the same
name as the document, but the extension will be set to

.IDX
@198

&
Toggle Mouse Scroll Bar

main: 198   Alternate: 198

This enables you to display a scroll bar on the
right hand side of the screen if you have a mouse.
)Note: the mouse driver must be loaded for the mouse to work

Clicking mouse buttons will have different effects depending upon
where it is on the screen. The scroll bar allows repositioning within
the file. The top 2 lines are for help & menus.

]
)Top 2 Lines:
) Left Button  - Open another window
) Right Button - PullDown Menu
) Both Buttons - Help Menu

)Menu System:
)  Left Button  - select highlighted choice
)  Right Button - escape to previous level
)  Both buttons - Help (if available)
)  Motion       - move highlight
]
)Scroll Bar:
)  Arrows:
)       Press Left button to scroll up or down
)  Bar:
)       Click left button to page up (above elevator)
)        or page down (below elevator)

)Text Body:
)  Left Button - click to position cursor
)                (will change windows if necessary)
)  Right Button - restore current line
)  Both buttons - press & drag to mark a block
)               marking stops when you release button
)               positions cursor at mouse cursor
@199

&
Toggle Automatic Save

main: 199   Alternate: 199

This enables automatic saving of modified files when ON.
You can set a time delay and a keystroke limit, and files
will be saved if the time limit is passed, or the keystroke
limit is exceeded.

@200

&
Set Automatic Save Time Delay

main: 200   Alternate: 200

This specifies the maximum number of minutes that should elapse
between automatic saves of any modified files. Note that
Autosave must be ON for this to be effective.

Valid range is 1 to 59 minutes.
)The default is 15 minutes.
@201

&
Set Automatic Save Keystroke Limit

main: 201   Alternate: 201

This specifies the maximum number of keystrokes that should occur
between automatic saves of any modified files. Note that
Autosave must be ON for this to be effective.

Valid range is 100 to 32768 keystrokes.
)The default is 2000
@202

&
Export Ascii

main: 202   Alternative: 202

This command is used to export pure ascii text.
If there is a block marked, and that block is in the
current window, then the block is exported
as pure Ascii text, otherwise it exports the entire file in
the current window as Ascii text.

Pure Ascii means that all
format commands (dot commands and font controls) are stripped
from the file.
@203

&
Toggle Between Word Fugue & 4Dos file Descriptions

main: 203   Alternative: 203

This command toggles the file description storage between
Word Fugue's proprietary format (stored in FILEINFO.WF) and
that supported by 4Dos - the shareware COMMAND.COM replacement
(stored in DESCRIPT.ION). If you have 4Dos and use the Describe
command, then you should probably store file descriptions in 4Dos
format. That gives you up to 40 characters of description. The word Fugue
format gives you up to 65 characters. This option can be saved with the
Save options command.
@204

&
Ctrl-Z as End Of File

main: 204   Alternative: 204

This command allows you to determine whether or not a ^Z
character marks the end of a file. Wordstar and most editors
use a ^Z character to mark the end of a file, but some editors
do not, instead using the actual file length. Turn this off with care!
@205

&
Toggle amount of Memory for DOS Shell

main: 205   Alternative: 205

This command determines how much memory is made available
when you invoke a DOS command. The default is only available
memory which is left after the program is loaded plus any files
you may be editing.

If you set this to 
All Memory, then a stub
of approximately 8K remains in memory, while the rest of the program
and memory it is using is swapped either to EMS memory (if you have
some and sufficient is available) or to the default disk drive and
directory (if there
is sufficient room there). On disk, the swap file is called WF.$WP,
and is marked as a system and hidden file. It will not be visible to
normal DOS commands.
Do not delete this file after shelling to DOS, or you will lock up
your machine when you try to exit back to Word Fugue.
@206

&
Toggle Use of External Config File

main: 206   Alternative: 206

This command determines whether or not the configuration
is saved to  file WF.CFG in the current (default) directory
as well as being saved in the program executable as well.
It is useful if you want to have different configurations
in different directories, such as Word Wrap and Paging ON
in your word Processing directory, but OFF in your programs
directory.

The default configuration is ON, and saves configuration
information to the file WF.CFG - if it is OFF, then no file
will be saved, and none will be sought on start up.

Turning this Option OFF will force "Modify WF.EXE" to ON, so that the
configuration information will be written to the executable instead.
@207

&
Load Recent File

main: 207   Alternative: 207

This command allows you to display a list of the last 12
files you edited, and select one to load. A new window will
be opened, so any files you currently have open will be
unchanged.

It requires that you turned the Pick File option ON, so that
the names of recent files are saved to a disk file.
@208

&
Pick File

main: 208   Alternative: 208

This command allows you to save the names and cursor
positions of the last 12 files you edited into a file called
WF.PCK in the current directory. When you subsequently load
a file that is in the list, Word Fugue will restore the
marked block (if any) the bookmarks (if any), and reposition
the cursor at the line and column it had when the file was
last saved.
@209

&
Main Lexicon

main: 209   Alternative: 209

This command allows you to change the name of the dictionary
to be used for spell checking. This is useful if you work in
several languages, since you can easily switch language
specific dictionaries.
@210

&
Auxiliary Word List

main 210    Alternative: 210

This command allows you to change the name of the file where Word
Fugue stores the words you ask it to add to the dictionary. This
allows you to have several separate word lists to be used with
different files.
@211

&
Toggle Generation of File name

main 211    Alternative: 211

This option, when ON, permits Word Fugue to generate a
pseudo-random number for a file name whenever you start it
without specifying a file name, which saves you the trouble
of thinking up a file name each time. You should use it
in conjunction with File descriptions to ensure that all
your files are recognisable.

When OFF, Word Fugue will create a new file with the name
<none>, and you will be prompted for a file name when you
try to save it.
@212

&
Toggle Force File Description

main 212    Alternative: 212

When ON, this option causes Word Fugue to prompt for a file
description for every new file. When OFF, the use of file
descriptions is at your discretion. File descriptions can be
up to 65 characters in length (Word Fugue format), or you
can use 4DOS file descriptions (limited to 40 characters).

If you create many files in a directory, we strongly urge
you to use file descriptions to make your files more
manageable. This option can be saved by use of the 
Save Setup
command.
@213

&
Set Line Spacing

main 213    Alternative: 213

This command permits you to change the default line spacing
from 1.0 to any value between 0.05 and 20.0. These values
are times the normal spacing your printer uses. Most
printers work at 6 lines per inch as the normal spacing.

)   To achieve double line spacing, set this to    2.0
)   To achieve one and a half spacing, set this to 1.5
)   To achieve 8 lines per inch, set this to       0.75

]Note that the printer definition file you use (.PDF) must have the
line height sequence set up.

The line height sequence should include 
# if your printer needs the
height as a binary number, and should include 
$ if your printer
needs the height as a character string.

)   eg for an Epson you could use ESC A #, where 
# will
)      be replaced by the binary equivalent of the number
)   eg for a laser you may need |LH$, where 
C will be
)      replaced by the character equivalent of the number

The 
Reserved slot underneath this sequence stores the units (eg for
1/60 inch it stores 60), so that Word Fugue can calculate how many
lines will fit on a page.
@214

&
Create New Footnote

main 214    Alternative: 214

This command will create a new footnote reference where the
cursor is, and will open another window with the footnotes
file ready for you to enter the footnote text.

If you have
WYSIWYG (What You See Is What You Get) display enabled, the
note will show as a reference number in the colour for
superscripts. When you print, the footnote text will appear
at the bottom of the page, and a superscripted reference
will appear in the text.

Footnote references can be numbers, letters of the alphabet,
roman numerals, or special characters such as $
@215

&
Create New Endnote

main 215    Alternative: 215

This command will create a new Endnote reference where the
cursor is, and will open another window with the Endnotes
file ready for you to enter the Endnote text.

If you have
WYSIWYG (What You See Is What You Get) display enabled, the
note will show as a reference number in the colour for
superscripts. When you print, the Endnote text will appear
at the end of the document, and a superscripted reference
will appear in the text.

Endnote references can be numbers, letters of the alphabet,
roman numerals, or special characters such as $
@216

&
Create New Annotation

main 216    Alternative: 216

This command will create a new Annotation reference where the
cursor is, and will open another window with the notes
file ready for you to enter the note text. If you have
WYSIWYG (What You See Is What You Get) display enabled, the
note will show as a reference number in the colour for
superscripts.

Annotations do not print, but can be used to record comments
about the text. This is especially useful if several people
are reviewing a document.
@217

&
Cite old Footnote

main 217    Alternative: 217

This command will insert an existing Footnote reference where the
cursor is. You will be prompted for the Footnote ID number
(a 4 digit number that uniquely identifies each footnote in
the notes file)

If you have WYSIWYG (What You See Is What
You Get) display enabled, the note will show as a reference
number in the colour for superscripts.

]The footnote will print at the bottom of the page. If you
refer to the same footnote twice on the same page, each
reference will display the same reference number, and the
footnote will print only once.
@218

&
Include old Endnote

main 218    Alternative: 218

This command will insert an existing Endnote reference where the
cursor is. You will be prompted for the Endnote ID number
(a 4 digit number that uniquely identifies each footnote in
the notes file)

If you have WYSIWYG (What You See Is What
You Get) display enabled, the note will show as a reference
number in the colour for superscripts.

]The Endnote will print at the end of the document. If you
refer to the same Endnote twice or more in the document, each
reference will display the same reference number, and the
Endnote will print only once.
@219

&
Modify note text

main 219    Alternative: 219

This command will open up a window into the notes file, and
position the cursor at the start of the note you wish to
edit.

To use this, you must place the cursor within the note
reference you wish to modify. ie between the { and the }
@220

&
Swap Foot - End note

main 220    Alternative: 220

A footnote reference has the form 
{.@NFxnnnn}, while an
Endnote has the form 
{.@NExnnnn}. This command simply
changes the F to an E, or the E to an F.

To use it you must place the cursor within the note
reference you wish to change.
@221

&
Change Note Reference Character

main 221    Alternative: 221

A footnote reference has the form 
{.@NFxnnnn}, while an
Endnote has the form 
{.@NExnnnn}. The nnnn is a 4 digit
unique identifier in the notes file to enable Word Fugue to
locate the corresponding text.

The x is the character that determines what reference
actually prints in the text. The reference character will
print superscripted, and will display (if Font display is
on) in a different colour, instead of seeing the complete
note reference function.
] The x character can be:

)n or N = print a number (sequentially numbered)
)     r = print lowercase roman numeral (sequential)
)     R = print Uppercase roman numeral (sequential)
)     a = print lowercase letter     (sequential)
)     A = print Uppercase letter     (sequential)
)  anything else prints as is
)           eg {.@NF$nnnn} for $
@222

&
Flush Line Right

    Keystroke sequence:   222
)    Alternate keystrokes: 222

The current line will be pushed to the
right margin. This command is active
only when Word Wrap mode is on. If both Word Wrap
and Column Mode are on, the text within the current
column will be flushed right within the column boundaries.
@223

&
Insert End Paragraph Mark

    Keystroke sequence:   223
)    Alternate keystrokes: 223

Normally a paragraph is terminated by a blank line
(a double carriage return). Paragraph reformatting
takes this into account. However, in some
circumstances you want to start a new paragraph on
the next line. This command inserts a special
marker into the text at the cursor location, so
that the next line is treated as a new paragraph
for paragraph reformatting.

@224

&
Enter Give Paragraph Mark

    Keystroke sequence:   224
)    Alternate keystrokes: 224

Normally a paragraph is terminated by a blank line
(a double carriage return). Paragraph reformatting
takes this into account. However, in some
circumstances you want to start a new paragraph on
the next line. This command determines whether
the Enter key inserts a special marker into the text at the cursor
location, so that the next line is treated as a new paragraph for
paragraph reformatting. ON will insert the marker, OFF will not.

@225

&
Toggle Visible Padding

    Keystroke sequence:   225
)    Alternate keystrokes: 225

When you use justification, Word Fugue inserts
special padding characters between the words on a
line so that the words will fit flush with the
left and right margins. These characters may be
removed again if you change the line. With this
option OFF, padding characters display as spaces.
With the option ON, they will display as ·
characters. Padding characters will always print
as spaces.
@226

&
Sort Block

    Keystroke sequence:   226
)    Alternate keystrokes: 226

You will be prompted whether you want the block
sorted in ascending order (A..Z) or descending
order (z..a). The marked block will then be sorted
in the sequence you selected. Sorting is NOT case
sensitive. The entire line is ALWAYS sorted, even in column mode.

If you are in column mode, or the start column is
not the same as the end column, only the
characters between the 2 column limits will be
compared, otherwise the first 50 characters of the
lines will be compared.

YOU CANNOT UNDO A BLOCK SORT - YOU MAY WANT TO
SAVE FIRST
@227

&
Use Border

    Keystroke sequence:   227
)    Alternate keystrokes: 227

Some screens (most CGA, EGA & VGA) are capable of displaying
a border around the screen. This command will toggle the
display of the border. Note that some VGA cards can emulate
other screens, and some modes will display a border, while others
will not.

The border colour is the same as the Status Line colour,
so if you want to change it, you would use this setting.
@228

&
Hyphenation

    Keystroke sequence:   228
)    Alternate keystrokes: 228

Word Fugue can insert hyphens during Word Wrap and paragraph
reformat operation. When this option is ON, Word Fugue will insert
hyphens in words that cross the right margin, while if this option
is OFF, Word Fugue will move the entire word to the next line instead.
The Option Squash Line on Wrap should be ON also so that Word Fugue will
remove any hyphens inserted during a previous reformat of the same
paragraph.

]Word Fugue will hyphenate a word if the number of characters
in the word to the left of the right margin exceeds (or is equal to)
the Hyphen Hot Zone setting
@229

&
Hyphen Hot Zone

    Keystroke sequence:   229
)    Alternate keystrokes: 229

When Hyphenation is ON, Word Fugue will hyphenate a word
that crosses the right margin if the word has at least this
many characters to the left of the right margin.

For example:
)      If Hyphen Hot Zone is 3, then words will be
)      hyphenated if there are at least 3 characters
)      within the right margin. The rest of the word
)      will be moved to the next line
)
)        Hyphena|tion  ->   Hyphen-
)                           ation
)
)        Hy|phenation  ->
)                          Hyphenation

This can take any value between 2 and 9
@230

&
Toggle Modification of WF.EXE

main: 230   Alternative: 230

This command determines whether or not the configuration information
is saved into WF.EXE (the program executable). Some virus checkers
calculate check sums on Executables, and writing the configuration
into WF.EXE will invalidate the checksum, causing these programs to
think that WF.EXE has been corrupted.

Writing to the WF.EXE file is useful if you do
not want to be bothered with the possibility of multiple (conflicting)
WF.CFG files in different directories.

The default is OFF. Note that turning OFF the "External WF.CFG" option
will force "modify WF.EXE" to ON, since configuration information MUST
be written somewhere.

See also "External CFG file"
@231

&
Margin Change inserts Ruler Line

    Keystroke sequence:   231
)    Alternate keystrokes: 231

When this option is ON, and change to the margin is saved
into your text as a ruler line (.RR line). This will enable
margin changes to be remembered if you load the file to edit
it again on another occasion.

With this option OFF, margin changes do not change the Ruler line
so
)1. If you have inserted a ruler line into you document,
)   it WILL over-ride your margin change.
)
)2. Any margin changes will be forgotten when you exit Word Fugue
@235

&
Macro Directory

    Keystroke sequence:   235
)    Alternate keystrokes: 235

This sets the directory in which Word Fugue will search for macro
files. If it is blank, the program will look for files in the current
directory.
@236

&
Toggle Overflow Marks

    Keystroke sequence:   236
)    Alternate keystrokes: 236

This command toggles between displaying continuation markers if the
line overflows the left («) or the right (») of the screen. These
marks display if the toggle is ON