home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR36
/
WWIV423.ZIP
/
MODEMS.MDM
< prev
next >
Wrap
Text File
|
1993-11-27
|
176KB
|
4,104 lines
##############################################################################
#
# WWIV Version 4
# Copyright (C) 1988-1993 by Wayne Bell
#
# This modem definition file may not be distributed except as a part of
# the complete WWIV v4 system. This file may not be distributed in modified
# form at all. If you wish, you may distribute a separate, modified modem
# configuration file, with the configuration information for one modem.
# See the 'wwivmodm.doc' file for a description on how to do this.
#
##############################################################################
##############################################################################
#
# Can someone plese tell me why so many modems nowdays don't have brand
# names, or even model names? It really makes it hard to list them here,
# when all you can see on the manual cover is "2400 BPS MNP modem".
#
##############################################################################
##############################################################################
#
# Line types:
#
# FILE: Name of file for modem info to follow
# NAME: Name/description of modem
# NOTE: Notes on modem configuration
# CONF: String to configure modem (sent from INIT, not BBS)
# SETU: Setup string sent once to the modem
# INIT: Initialization string sent often to the modem
# ANSR: String sent to the modem to answer phone
# PICK: String sent to the modem to pick up the phone
# HANG: String sent to the modem to hang up the phone
# DIAL: Dialing prefix
# SEPR: Separator characters for result codes (passed to strtok)
# DEFL: Default modem switches
# RESL: Result code info.
# First, result code (full or partial) from modem
# Optional description - single quotes means append
# Lastly, switch settings
# AUTO: Information for modem auto-selection
#
# Switches:
#
# NORM normal state of modem
# RING phone is ringing
# RINGING remote phone is ringing
# ERR error encountered
# DIS disconnected (No connection)
# NDT no dial tone (same as DIS)
# CON connection established
# MS= modem speed
# CS= com port speed
# AS= asymmetrical baud rates (Y/N)
# EC= error correcting (Y/N)
# DC= data compression (Y/N)
# FC= flow control (Y/N)
#
##############################################################################
##############################################################################
#
# Information for modem auto-selection
#
# 0 - modem type found
# 1 - initial state
# 2 - a USR Courier
# 3 - a USR Courier that responds to AT&A3
#
AUTO: 1 0 "USRCV42" "ATI4{" "USROBOTICS COURIER 2400"
AUTO: 1 2 "USRC1" "ATI4{" "USROBOTICS COURIER"
AUTO: 2 3 "USRC31" "AT&A3{" "0"
AUTO: 3 0 "USRC3" "ATI{" "1442"
AUTO: 2 0 "USRC2" "AT&A2{" "0"
AUTO: 1 0 "USRS9600" "ATI4{" "USROBOTICS SPORTSTER 9600"
AUTO: 1 0 "COMPUCOM" "ATI3{" "(C) COPYRIGHT COMPUCOM"
AUTO: 1 0 "PP9600SA" "ATI3{" "PM9600SA"
AUTO: 1 0 "PP2400V4" "ATI3{" "PM2400SA"
AUTO: 1 0 "TB3000" "ATI3{" "T3000"
AUTO: 1 0 "USRSMNP" "ATU{" "USROBOTICS SPORTSTER"
AUTO: 1 0 "C964I" "ATI{" "964I"
AUTO: 1 0 "DIGISCT" "AT*O{" "MODEL:SCOUT PC PLUS"
##############################################################################
##############################################################################
###
### First, generic 2400 and less (non-MNP) modems.
###
##############################################################################
##############################################################################
##############################################################################
#
# Hayes compatible 300 baud modems. If you've got one, get a new modem.
#
FILE: "H0300"
NAME: "Hayes compatible 300"
NOTE: "Running a BBS really requires a faster modem."
SETU: ""
INIT: "ATC1E0F1M0Q0V1S0=0S2=1H0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=300 CS=300 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "CONNECT" "300" MS=300 CS=300 CON
##############################################################################
#
# Hayes compatible 1200 baud modems.
#
FILE: "H1200"
NAME: "Hayes compatible 1200"
NOTE: "If the BBS does not answer the phone, try the H1200S configuration."
SETU: ""
INIT: "ATE0M0Q0V1X1S0=0S2=1H0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=1200 CS=1200 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
##############################################################################
#
# Hayes compatible 1200 baud modems, that respond slowly after a RING.
#
FILE: "H1200S"
NAME: "Hayes compatible 1200, if H1200 does not answer phone"
SETU: ""
INIT: "ATE0M0Q0V1X1S0=0S2=1H0{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=1200 CS=1200 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
##############################################################################
#
# Hayes compatible 2400 baud modems.
#
FILE: "H2400"
NAME: "Hayes compatible 2400"
NOTE: "If the BBS does not answer the phone, try the H2400S configuration."
SETU: "AT&C1&D2Q0V1{"
INIT: "ATE0M0Q0V1X4S0=0S2=1H0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
##############################################################################
#
# Hayes compatible 2400 baud modems, that respond slowly after a RING.
#
FILE: "H2400S"
NAME: "Hayes compatible 2400, if H2400 does not answer phone"
SETU: "AT&C1&D2Q0V1{"
INIT: "ATE0M0Q0V1X4S0=0S2=1H0{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
##############################################################################
#
# Hayes compatible 2400 baud modems, except not very compatible.
#
FILE: "H2400Z"
NAME: "Hayes compatible 2400, if others dont work"
NOTE: "Ensure you have the modem set to hang up when DTR drops, and to have^M^J"
NOTE: "CD >NOT< always on."
SETU: "~ATQ0V1{"
INIT: "~ATE0M0Q0V1X4S0=0S2=1H0{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
##############################################################################
##############################################################################
###
### Now, some 2400 MNP/LAPM modems
###
##############################################################################
##############################################################################
##############################################################################
#
# AMT Star 2400 Internal Modem(s).
#
FILE: "AMT_STAR"
NAME: "AMT Star 2400 internal modem"
NOTE: "Ensure you have the modem set to hang up when DTR drops, and to have^M^J"
NOTE: "CD >NOT< always on."
SETU: "ATM0Q0V1&C1&D3M0X4S7=45S2=1S6=5&W{"
INIT: "ATZ{"
ANSR: "ATA{"
PICK: "ATM0H1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 600" "600" MS=600 CS=600 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
###############################################################################
#
# ATI 2400/etc/e
#
FILE: "ATI2400"
NAME: "ATI 2400ETC/E or 2400ETC/I"
CONF: "AT&F2&C1&D2H0E0V0W2X6S11=55S7=75S38=255&W0&Y0{"
INIT: "ATZ{"
SETU: ""
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "0" "OK" NORM
RESL: "2" "Ring" RING
RESL: "1" "300" CON MS=300
RESL: "3" "No Carrier" DIS
RESL: "4" "Error" ERR
RESL: "5" "1200" CON MS=1200
RESL: "6" "No Dial Tone" NDT
RESL: "7" "Busy" DIS
RESL: "8" "No Answer" DIS
RESL: "18" "Ringing" RINGING
RESL: "19" "Voice" DIS
RESL: "10" "2400" CON MS=2400
RESL: "11" "4800" CON MS=4800
RESL: "12" "9600" CON MS=9600
RESL: "20" "300/MNP" CON MS=300 EC=Y DC=Y
RESL: "22" "1200/MNP" CON MS=1200 EC=Y DC=Y
RESL: "23" "2400/MNP" CON MS=2400 EC=Y DC=Y
RESL: "24" "1200/LAPM" CON MS=1200 EC=Y DC=Y
RESL: "25" "2400/LAPM" CON MS=2400 EC=Y DC=Y
##############################################################################
#
# ACER Modem 2424/PC
#
FILE: "ACER2424"
NAME: "ACER 2424/PC with MNP5"
CONF: "ATZ~~~~~~~AT{~~AT&W{"
SETU: "AT&C1&D2&P1Q0V1\\V1%B2400{"
INIT: "ATX5L3M0E0S0=0S2=1S7=20\\A3\\C1\\G1\\J1\\N3{"
ANSR: "~~~ATA{"
PICK: "~~~ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 103" "300" MS=300 CS=9600 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=9600 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=9600 CON
RESL: "REL" '/MNP' EC=Y DC=Y
#############################################################################
#
# BocaModem 2400I (v.42bis/mnp5)
# From Avon 1@5813
#
FILE: "BOCA2400"
NAME: "BOCAMODEM 2400I (v.42bis/mnp5)"
INIT: "AT&C1&D2E0V1X4\\V0S2=1S11=50\\N3%C1W1&Q5{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 0600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "COMPRESSION: CLASS 5" '-5' DC=Y
RESL: "COMPRESSION: V.42BIS" 'bis' DC=Y
RESL: "COMPRESSION: NONE"
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: NONE"
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
##############################################################################
#
# Fax Modem 9624 International (no brand name ??)
#
FILE: "FM9624"
NAME: "Fax Modem 9624 International (V.42bis)"
INIT: "AT&FE0H0M0&M5\\G1\\J0\\Q3W1S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
##############################################################################
#
# Viva 24m
#
FILE: "VIVA1"
NAME: "Viva 24m"
SETU: "AT&C1&D2Q0V1{"
INIT: "ATE0H0M0Q0V1X4S0=0S2=1\\J0\\Q3{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 300" "300" MS=300 CS=300 CON
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "REL" '/REL' EC=Y
##############################################################################
#
# Viva 24im
#
FILE: "VIVA2"
NAME: "Viva 24im"
SETU: "AT&C1&D2Q0V1\\V1\\X1{"
INIT: "ATE0H0M0Q0V1X4S0=0S2=1\\J0\\Q3{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 300" "300" MS=300 CS=300 CON
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "REL 4" "/MNP 4" EC=Y
RESL: "REL 5" "/MNP 5" EC=Y DC=Y
##############################################################################
#
# Viva 2442if
#
FILE: "VIVA3"
NAME: "Viva 2442if"
SETU: "AT&C1&D2Q0V1\\V1\\X1&K3{"
INIT: "ATE0H0M0Q0V1X4S0=0S2=1\\J0\\Q3{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 300" "300" MS=300 CS=300 CON
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "REL 4" "/MNP 4" EC=Y
RESL: "REL 5" "/MNP 5" EC=Y DC=Y
RESL: "V.42" "/V.42" EC=Y
RESL: "V.42bis" "/V.42bis" EC=Y DC=Y
##############################################################################
#
# Practical Peripherals PM2400SA V.42
#
# From Mike Jacobs PPI Tech Support 8/28/91
#
FILE: "PP2400V4"
NAME: "Practical Peripherals PM2400SA V.42"
NOTE: "Configuration for the PM2400SA V.42 is still preliminary."
SETU: ""
INIT: "AT&C1&D2V1E0W2&Q5S95=2{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "ARQ" '/ARQ' EC=Y
##############################################################################
#
# Practical Peripherals PM2400SA MNP/5
#
# From Mike Jacobs PPI Tech Support 8/28/91
#
FILE: "PP2400MN"
NAME: "Practical Peripherals PM2400SA MNP/5"
NOTE: "Configuration for the PM2400SA MNP/5 is still preliminary."
SETU: ""
INIT: "AT&C1&D2V1E0\\J0\\N3\\C2\\V1\\Q3{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "REL" '/ARQ' EC=Y
##############################################################################
#
# Intel 2400ex and SatisFAXtion setup file
#
# By Cavalier @ 8513
FILE: "I2400EX"
NAME: "Intel 2400ex - Locked at 4800bps"
NOTE: "For use with 2400ex and SatisFAXtion Modem"
SETU: "AT&C1&D2Q0{~~~ATV1\\N3\\V1\\Q3\\C1\\J0{"
INIT: "ATE0H0M0Q0V1X4~S0=0~S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=4800 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=4800 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=4800 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=4800 CON
RESL: "REL" '/REL' EC=Y DC=Y
##############################################################################
#
# SupraModem 2400 Plus
#
FILE: "SUP24V42"
NAME: "Supra Modem 2400 Plus"
INIT: "AT&F2EHM\\J\\V2S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/-"
DEFL: MS=2400 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "BUSY" "Busy" DIS
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO ANSWER" "No Answer" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "CONNECT" "300" CON MS=300
RESL: "CONNECT 600" "600" CON MS=600
RESL: "CONNECT 1200" "1200" CON MS=1200
RESL: "CONNECT 2400" "2400" CON MS=2400
RESL: "REL" '' EC=Y
RESL: "MNP" '/MNP' EC=Y
RESL: "LAPM" '/LAPM' EC=Y
RESL: "COMP" '/COMP' DC=Y
##############################################################################
# New working Config for ZOOM's 2400 V.42bis modem
# By: 1@5053
# Any problems contact me..
#
# Zoom V.42bis modem.
#
FILE: "ZOOMV42"
NAME: "Zoom Modem V.42bis 2400"
INIT: "ATE0H0M0Q0V1X4\\N3%C1\\A3S0=0S2=1S48=7S95=44{"
SETU: "AT&C1&D2Q0V1{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATZ{~~~~ATM0DT"
SEPR: ""
DEFL: MS=2400 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "PROTOCOL: LAP-M" '/LAP-M' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=9600 CON
###########################################################################
#
# AT&T 2224 CEO 2400 MNP
#
# Always lock com port at 4800.
#
FILE: "ATTMNP"
NAME: "AT&T 2224 CEO MNP"
NOTE: "Still preliminary."
SETU: "AT&C1&D2Q0V1\\V1\\N3{"
INIT: "ATE0M0Q0V1X4S0=0S2=1\\N3\\V1\\Q3\\J0\\L0\\G1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=4800 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=4800 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=4800 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=4800 CON
RESL: "REL" '/REL' MS=2400 CS=4800 EC=Y CON
###########################################################################
#
# noname 2400 MNP
#
FILE: "2400NN1"
NAME: "Noname 2400 MNP #1"
SETU: "AT&FE0H0M0\\J0\\N3\\Q3\\V1\\C1S0=0S2=1{"
INIT: "ATH0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=4800 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 0300" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "REL" '/REL' EC=Y
##############################################################################
#
# Everex: Evercom 24E+ by Microchip 1@835
#
FILE: "EVERC24E"
NAME: "Evercom 24e+ "
SETU: "AT&C1&D2Q0V0\\%C0{"
INIT: "ATE0H0M0Q0X4S0=0S2=1\\N3\\V1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATD"
SEPR: ""
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=N
RESL: "0" "Normal" NORM
RESL: "2" "Ring" RING
RESL: "3" "No Carrier" DIS
RESL: "4" "Error" ERR
RESL: "6" "No Dial Tone" NDT
RESL: "7" "Busy" DIS
RESL: "8" "No Answer" DIS
RESL: "1" "300" MS=300 CS=300 CON
RESL: "5" "1200" MS=1200 CS=1200 CON
RESL: "10" "2400" MS=2400 CS=2400 CON
RESL: "22" "1200/MNP4" MS=1200 CS=1200 CON EC=Y
RESL: "23" "2400/MNP4" MS=2400 CS=2400 CON EC=Y
##############################################################################
#
# IBM 2400 with MNP 3 (oooh! Where can I get one?)
#
FILE: "IBMMNP3"
NAME: "IBM 2400 with MNP 3"
NOTE: "Must have sw1:On sw2:on sw3:off sw4:off sw5:off sw6:on"
INIT: "ATE0H0M0Q0V1X1S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=4800 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "ECL" '/ECL' EC=Y
##############################################################################
#
# Discovery 2400 baud modems with voice recognition.
#
FILE: "DIS2400H"
NAME: "Discovery 2400H Voice discrimition modem"
SETU: "AT&C1&D1Q0V1S0=0J1S2=1X3{"
INIT: "ATE0F1H0M0Q0V1{"
ANSR: ""
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=2400 CS=2400 EC=N DC=N AS=N FC=N
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
##############################################################################
##############################################################################
###
### Now, USRobotics modems, starting with HSTs
###
##############################################################################
##############################################################################
##############################################################################
#
# Original HST/V.32/DS
#
# Have to use &A1 mode, and no &B2
#
FILE: "USRC1"
NAME: "USR Courier (Orig, No V.42, real old - &A1 mode)"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "ATC1E0F1H0M0Q0V1X6&A1&B1&C1&D2{~~AT&H1&I0&K1&N0&R2&S0S0=0S2=1{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATB1DT"
SEPR: "/"
DEFL: MS=19200 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=19200 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=19200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=19200 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=19200 CON
RESL: "CONNECT 9600" "9600" AS=Y MS=9600 CS=19200 CON
RESL: "ARQ" EC=Y CS=19200
RESL: "NONE" EC=N
RESL: "SYNC"
##############################################################################
#
# Not quite so old USR HST/V.32/DS modems.
#
# Uses &A2 mode.
#
FILE: "USRC2"
NAME: "USR Courier (No V.42 - &A2 mode)"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "ATC1E0F1H0M0Q0V1X6&A2&B2&C1&D2S38=1{~~AT&H1&I0&K1&N0&R2&S0S0=0S2=1{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATB1DT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "ARQ" EC=Y CS=38400
RESL: "HST" "14400/HST" AS=Y MS=14400
RESL: "V32" '/V.32' AS=N
RESL: "NONE" EC=N
RESL: "SYNC"
##############################################################################
#
# Older USR HST/V.32/DS modems.
#
# They return "9600/HST" when they mean "14400/HST".
# This doesn't handle 4800/HST correctly, but I've never seen anyone use that.
#
FILE: "USRC3"
NAME: "USR Courier (With V.42 - &A3 mode)"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "ATC1E0F1H0M0Q0V1X6&A3&B2&C1&D2S38=1{~~AT&H1&I0&K1&N0&R2&S0S0=0S2=1{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATB1DT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "ARQ" EC=Y CS=38400
RESL: "HST" '/HST' AS=Y MS=14400
RESL: "V32" '/V.32' AS=N
RESL: "MNP" '/MNP' EC=Y
RESL: "LAPM" '/LAPM' EC=Y
RESL: "MNP5" '/MNP5' DC=Y
RESL: "V42BIS" '/V.42bis' DC=Y
RESL: "NONE" EC=N
RESL: "SYNC"
##############################################################################
#
# Newest version of USR HST/V.32bis/DS modems
#
# This really returns the optimal information.
#
FILE: "USRC31"
NAME: "USR Courier (Newest, With rectangular LEDs/V.32bis)"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "AT&FE0Q0V1X6&A3&B2&C1&D2&H1&R2S38=1{"
INIT: "ATB0H0M0S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CS=14400 CON
RESL: "CONNECT 16800" "16800" MS=16800 CS=16800 CON
RESL: "CONNECT 19200" "19200" MS=19200 CS=19200 CON
RESL: "CONNECT 21600" "21600" MS=21600 CS=21600 CON
RESL: "ARQ" EC=Y CS=38400
RESL: "HST" '/HST' AS=Y
RESL: "V32" '/V.32' AS=N
RESL: "MNP" '/MNP' EC=Y
RESL: "LAPM" '/LAPM' EC=Y
RESL: "MNP5" '/MNP5' DC=Y
RESL: "V42BIS" '/V.42bis' DC=Y
RESL: "NONE" EC=N
RESL: "SYNC"
##############################################################################
#
# USRobotics Sportster MNP modem
#
# Always locks com port at 9600.
#
FILE: "USRSMNP"
NAME: "USR Sportster 2400 MNP"
NOTE: "Configuration for the USR Sportster 2400 MNP is still preliminary."
SETU: "AT&A1&B6&C1&D2&H1&R2{"
INIT: "ATC1E0F1H0M0Q0V1X4S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "ARQ" '/ARQ' EC=Y
##############################################################################
#
# USR Sportster 9600 or 14400
#
FILE: "USRS9600"
NAME: "USR Sportster 9600/14400 V.32/V.42bis"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "ATC1E0F1H0M0Q0V1X4&A3&B2&C1&D2{~~AT&H1&I0&K1&N0&R2&S0S0=0S2=1{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CS=1200 CON
RESL: "CONNECT 14400" "14400" MS=14400 CS=14400 CON
RESL: "ARQ" EC=Y CS=38400
RESL: "V32" '/V.32' AS=N
RESL: "MNP" '/MNP' EC=Y
RESL: "LAPM" '/LAPM' EC=Y
RESL: "MNP5" '/MNP5' DC=Y
RESL: "V42BIS" '/V.42bis' DC=Y
RESL: "NONE" EC=N
#########################################################################
#
# US Robotics Sportster 14.4 v32bis/v42bis
# by Sir Laughalot 1 @9412
#
FILE: "USRS144"
NAME: "USR Sportster 14400 V.32bis/V.42bis"
NOTE: "Has worked fine for over a year."
CONF: "ATZ{~~~AT&W{"
SETU: "ATC1E0F1H0M0Q0V1X4&A3&B2&C1&D2{~~AT&H1&I0&K1&N0&R2&S0S0=0S2=1S9=3{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CS=14400 CON
RESL: "ARQ" EC=Y
RESL: "V32" '/V.32' AS=N
RESL: "MNP" '/MNP' EC=Y
RESL: "LAPM" '/LAPM' EC=Y
RESL: "MNP5" '/MNP5' DC=Y CS=38400
RESL: "V42BIS" '/V.42bis' DC=Y CS=38400
RESL: "NONE" '/NONE' EC=N
##############################################################################
#
# Courier 2400 With V.42bis
#
FILE: "USRCV42"
NAME: "USR Courier 2400 with V.42bis"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "ATC1E0F1H0M0Q0V1X4&A3&B2&C1&D2{~~AT&H1&I0&K1&N0&R2&S0S0=0S2=1{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "ARQ" EC=Y CS=38400
RESL: "MNP" '/MNP' EC=Y
RESL: "LAPM" '/LAPM' EC=Y
RESL: "MNP5" '/MNP5' DC=Y
RESL: "V42BIS" '/V.42bis' DC=Y
RESL: "NONE" EC=N
##############################################################################
##############################################################################
###
### Now, some fairly close V.32/V.32bis modems
###
##############################################################################
##############################################################################
##############################################################################
#
# "Generic" V.32 modem - Finally, some kind of standard.
#
FILE: "GEN-V32"
NAME: "Generic V.32"
SETU: "ATE0H0M0Q0V1X4\\N3%C1\\A3S0=0S2=1S95=44W1{"
INIT: "AT&C1&D2Q0V1{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
##############################################################################
#
# Zoom V.32 Turbo In 12,000 Mode. All Features On.
#
# Set up by Chris #1 @2914.WWIVnet
#
FILE: "ZMTRBO"
NAME: "Zoom v.32 Turbo - 12,000 Bps"
SETU: "ATB1E0L2M0N1Q0TV1W0X4Y0&C1&D2S0=0S1=00S7=30S37=0S10=10S11=50{"
INIT: "AT&C1&D2%Q\\N3%C1S7=30S11=50S37=0S48=7M0L1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATS7=120DT"
SEPR: ""
DEFL: MS=12000 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600/V.32" MS=9600
RESL: "CARRIER 12000" "12000/V.32bis" MS=12000
RESL: "CARRIER 14400" "14400/V.32bis" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/V.42' EC=Y
RESL: "PROTOCOL: LAPM" '/V.42' EC=Y
RESL: "PROTOCOL: LAP-M" '/V.42' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
##############################################################################
#
# Cardinal 144 fax
#
FILE: "C144"
NAME: "Cardinal 14.4 (fax)"
INIT: "AT&FW1&C1&D2S0=S2=1S95=44{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# Boca Fax/Modem V.32bis/V.42bis
# By Aldur 1@3314
FILE: "BOCA144"
NAME: "BocaModem 14.4k"
SETU: "ATZ{"
INIT: "AT&FE0V1X4&C1&D2H0M0W1S0=0S2=1S7=60S11=55S95=44{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: ""
DEFL: MS=14400 CS=57600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "CONNECT" "Connect" CON
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/v.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/v.42bis' DC=Y
RESL: "CONNECT" '' CS=57600 CON
RESL: "CONNECT 600" '' CS=57600 CON
RESL: "CONNECT 1200" '' CS=57600 CON
RESL: "CONNECT 2400" '' CS=57600 CON
RESL: "CONNECT 4800" '' CS=57600 CON
RESL: "CONNECT 9600" '' CS=57600 CON
RESL: "CONNECT 12000" '' CS=57600 CON
RESL: "CONNECT 14400" '' CS=57600 CON
RESL: "CONNECT 19200" '' CS=57600 CON
RESL: "CONNECT 38400" '' CS=57600 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# Twincomm modem
#
FILE: "TWINCOM"
NAME: "Twincomm14.4 Data/Fax"
SETU: "ATE0H0M0N1Q0V1W1X4Y1\\N3%C1%D1%M3\\A2\\G0S0=0S2=1S10=10S95=44{"
INIT: "AT&C1&D2&Q5&K3S36=1S48=7S46=138{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "~ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=14400 CS=57600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# TwinComm 96/42i modem driver..
# Created/Modified by Geoff Larsen (@6401)..
FILE: "TWIN96"
NAME: "Twincomm 96/42i"
SETU: "AT&FE0S95=44&C1&D2H0M0T{"
INIT: "AT%E1&C1&D2H0M0&X0S37=0{"
ANSR: "~ATA{"
PICK: "ATM0H1{"
HANG: "ATH0{"
DIAL: "AT&X0M1D"
SEPR: ""
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=38400 CON
RESL: "CONNECT 600" '' CS=38400 CON
RESL: "CONNECT 0600" '' CS=38400 CON
RESL: "CONNECT 1200" '' CS=38400 CON
RESL: "CONNECT 2400" '' CS=38400 CON
RESL: "CONNECT 4800" '' CS=38400 CON
RESL: "CONNECT 7200" '' CS=38400 CON
RESL: "CONNECT 9600" '' CS=38400 CON
RESL: "CONNECT 19200" '' CS=38400 CON
RESL: "CONNECT 38400" '' CS=38400 CON
###############################################################################
#
# TelePath FAXmodem 14,400 / 9,600
# By Dixie Flatline @ WWivLink 12903
#
FILE: "TELEPATH"
NAME: "TelePath FAXmodem"
NOTE: "=> Created by Dixie Flatline, Gridpoint, WWivLink @12903^M^J"
NOTE: "Locks Comport at 14400 for 9600 callers, and locks comport at^M^J"
NOTE: "38000 for callers at higher rates. DTE rate follows caller if^M^J"
NOTE: "lower than that so as to in sure that they can abort menus and^M^J"
NOTE: "things with little difficulty.^M^J"
SETU: "AT&FW2X4&C1&D2S0=0S95=180S7=60{"
INIT: "ATM0S2=1S11=50{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: ""
DEFL: MS=14400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800/v32" MS=4800
RESL: "CARRIER 7200" "7200/v32" MS=7200
RESL: "CARRIER 9600" "9600/v32" MS=9600
RESL: "CARRIER 12000" "12.0k/v32bis" MS=12000
RESL: "CARRIER 14400" "14.4k/v32bis" MS=14400
RESL: "PROTOCOL: NONE" '/np' EC=N
RESL: "PROTOCOL: V.42/LAPM" '/v42/lapm' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAP-M' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/ALT' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: NONE" '/nc' DC=N
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/v42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/v42 bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=14400 CON
RESL: "CONNECT 12000" '' CS=38400 CON
RESL: "CONNECT 14400" '' CS=38400 CON
##############################################################################
#
# Infotel 144I
#
FILE: "INFOTEL"
NAME: "Infotel 144I"
SETU: "AT&FE0H0M0S0=0S2=1S95=44{"
INIT: "ATH0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# InfoTel (Twincom Clone) 14.4 D/F Modem Configuration File. v.32/v.32bis
# Hacked out by Saint Stephen @ (703) 883-9636 01/19/93
FILE: "ITV32BIS"
NAME: "InfoTel V.32bis - (Twincom Clone) - 14.4 D/F"
SETU: "ATE0H0M0N1Q0V1W1X4Y1\\N3%C1%D1%M3\\A2\\G0S0=0S2=1S10=10S95=44{"
INIT: "ATM0&C1&2&Q5&K3S36=5S48=7S46=138{"
ANSR: "~ATA{"
PICK: "ATH1"
HANG: "~ATH0{"
DIAL: "ATDP"
SEPR: ""
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N F=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# "SupraFaxModem V.32bis/V.42bis"
#
FILE: "SUPRA144"
NAME: "SupraFAX 14.4k"
SETU: "AT&F2Q0V1M0S95=32W1S11=50{"
INIT: "AT&C1&D2Q0V1X4S0=0S2=1W1S95=32S36=7{"
ANSR: "AT~A{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: ""
DEFL: MS=14400 CS=19200 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "CONNECT" "CONNECTED" CON
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300 CON
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" CS=300 CON
RESL: "CONNECT 600" CS=600 CON
RESL: "CONNECT 1200" CS=1200 CON
RESL: "CONNECT 2400" CS=2400 CON
RESL: "CONNECT 4800" CS=4800 CON
RESL: "CONNECT 9600" CS=9600 CON
RESL: "CONNECT 19200" CS=19200 CON
RESL: "CONNECT 38400" CS=38400 CON
RESL: "CONNECT 57600" CS=57600 CON
##############################################################################
#
# Evercom 96 v.32/v.42/v.42bis
#
FILE: "EVER96"
NAME: "Evercom 96"
SETU: "AT&F1E0H0W1S0=0S2=1\\V0{"
INIT: "ATH0M0{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
##############################################################################
#
# Aceex 9600 V.32 V.42bis mnp5
#
FILE: "ACEEX"
NAME: "ACEEX 9600/14400"
SETU: "AT&F1E0H0W1S0=0S2=1S95=44\\J0&Q5\\N3\\Q3\\V0&K3{"
INIT: "ATH0M0{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=14400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
#####################################################################################
#
# Viva 9642E V.32 V.42 V.42 Bis Mnp/5
#
FILE: "VIV-9624"
NAME: "Viva 9624E V.32 V.42 V.42 Bis"
SETU: "ATB1E0L1N1Q0V1W1X4&C1&D2&K4&M0&P0&Q5&X0{"
INIT: "AT\\N3%C1\\K3\\G0\\A3%D2%E0%M3{~ATS46=138S48=7S82=128S36=1S95=44S11=50{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
###############################################################################
#
# Viva 14,400 V.32/V.42 V.42 Bis /fax
#
FILE: "VIV-144"
NAME: "Viva 14,4009 V.32 V.42 V.42 Bis /FAX"
SETU: "ATB1E0N1Q0V1W1X4&C1&D2&K4&M0&P0&Q5&X0{"
INIT: "AT\\N3%C1\\K3\\G0\\A3%D2%E0%M0M0{~ATS46=138S48=7S82=128S36=1S95=44S11=50{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=57600 CS=57600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# Cardinal 9600 V.32/V.42bis (9600V42 External)
# By Mr. Mustang #1@5301 Full Force (503)-772-0304
#
FILE: "C9600"
NAME: "Cardinal 9600V42"
NOTE: "This setup is only preliminary."
SETU: "ATS0=0S2=1{"
INIT: "AT&C1&D2V1E0&Q5W2S36=7S38=5S48=7S46=138S95=34{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=19200 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300"
RESL: "CARRIER 1200" "1200"
RESL: "CARRIER 2400" "2400"
RESL: "CARRIER 9600" "9600"
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "ARQ" '/Reliable' EC=Y
RESL: "COMPRESSION CLASS5" '/MNP5' DC=Y
RESL: "COMPRESSION V42BIS" '/V.42bis' DC=Y
RESL: "PROTOCOL LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL ALT" '/MNP' EC=Y
RESL: "COMPRESSION NONE" '' DC=N
RESL: "PROTOCOL NONE" '' EC=N
##############################################################################
#
# "Zoom 14400 V.32bis/V.42bis faxmodem"
# By Abbot Layamon 1@13602
#
FILE: "ZOOMV32"
NAME: "Zoom 14.4k fax modem"
NOTE: "Compliments of The Abbey @13602 wwivnet and link^M^J"
SETU: "AT&FE0Q0V1S11=50{"
INIT: "ATM0W1&C1&D2&Q5S48=7S36=7%C1S0=0S2=1S95=44{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: ""
DEFL: MS=14400 CS=57600 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "CONNECT" "CONNECTED" CON
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" 'V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# "Zoom Modem V.32bis/V.42bis with MNP and No FAX"
# By Avon, WWIVnet 1@5813, IceNET 1@5802, WWIVweb 1@1, Sanctuary 508-892-8529
FILE: "ZOOM144"
NAME: "Zoom V32bis V42bis MNP2-5 14.4k, No Fax"
NOTE: "For use with High Speed 14.4 Zoom Modems without fax capabilities.^M^J"
NOTE: "based on work done by Papa Smurf.^M^J"
NOTE: "For 16550 Uarts change the CS in the DEFL line from 19200 to 38400.^M^J"
INIT: "AT&F&C1&D2E0M0W1X4S0=0S2=1S11=50S95=44{"
ANSR: "AT~A{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: ""
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "CONNECT" CS=300 CON
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "CONNECT 1200" CS=1200 CON
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 0600" CS=600 CON
RESL: "CONNECT 2400" CS=2400 CON
RESL: "CONNECT 4800" CS=4800 CON
RESL: "CONNECT 9600" CS=9600 CON
RESL: "CONNECT 7200" CS=7200 CON
RESL: "CONNECT 12000" CS=12000 CON
RESL: "CONNECT 14400" CS=14400 CON
RESL: "CONNECT 19200" CS=19200 CON
RESL: "CONNECT 38400" CS=38400 CON
RESL: "CONNECT 57600" CS=57600 CON
RESL: "CONNECT 115,200" CS=115200 CON
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "COMPRESSION: CLASS 5" '-5' DC=Y
RESL: "COMPRESSION: V.42BIS" 'bis' DC=Y
RESL: "COMPRESSION: NONE" '' DC=N
RESL: "PROTOCOL: NONE" '' EC=N
RESL: "PROTOCOL: LAP-M" '/V.42' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
############################################################################
#
# Practical Peripherals PM9600SA
#
# Modified by The Munchkin - sysop of The KC Information Exchange
#
# CONNECT indicates com port baud rate, CARRIER indicates modem connect speed
FILE: "PP9600SA"
NAME: "Practical Peripherals PM9600SA by #1 at 9359"
SETU: "AT&F&C1&D2M0W1S0=0S2=43S95=44&W0S46=136&W1{"
INIT: "ATZ0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATZ1{~~~~ATDT"
SEPR: ""
DEFL: MS=19200 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: V.42/LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
##############################################################################
#
# Practical Peripherals PM14400FXSA
#
FILE: "PP144SA"
NAME: "Practical Peripherals PM14400FXSA"
SETU: "AT&FE0H0M0S0=0S2=1&C1&D2&K3{"
INIT: "ATM0H0W1S95=44X4{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=14400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# Practical Peripherals PM14400FXMT
#
# CONNECT indicates com port baud rate, CARRIER indicates modem connect speed
# Default speed has been set at 19200. If you have a 16500AFN UART you
# may wish to change the DEFL: speeds higher
# As developed by Windjammer of the Windjammer's Cove net 7487 link 27487
FILE: "PP144MT"
NAME: "Practical Peripherals PM14400FXMT"
SETU: "AT&F1S0=0S2=1W1S95=47&B1&U0&Q5{"
INIT: "AT&F1Q0V1E0M0W1H0X4&Q5{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=19200 CS=19200 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "PROTOCOL: NONE" '/NONE' EC=N
RESL: "COMPRESSION: MNP5" '/MNP5' DC=Y
RESL: "COMPRESSION: NONE" '/NONE' DC=N
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
RESL: "CONNECT 57600" '' CS=57600 CON
##############################################################################
#
# LIGHTING COMUNICATIONS
#
# LightCom 96 V.32/V.42/V.42bis (internal)
#
# by Warlock (1@7200)
#
# NOTE: This will overwrite your 1st NRAM stored profile! Change if desired.
#
FILE: "LIGHTCOM"
NAME: "LightCom 96"
NOTE: "STORED PROFILE 0 has now been overwritten with the new parameters."
CONF: "AT&C1%C1&D2&K3&Q5S0=0S2=1S7=30S37=9S95=45E0M0N1Q0V1W0X4H0&W{"
SETU: "ATZ{"
INIT: "~~ATM0B0H0{"
ANSR: "ATA{"
PICK: "ATH1M0{"
HANG: "ATH0M0{"
DIAL: "ATDT"
SEPR: "^M^M"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800/V.32" MS=4800
RESL: "CARRIER 9600" "9600/V.32" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: NONE" ''
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: NONE" ''
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=38400 CON
##############################################################################
#
# "QUICK1.MDM - Released 01-05-93"
# "Tested On Quicktel's Internal Fax/Modem"
# Quicktel - Made in the USA by Logicode Technology, Inc.
# Author: Big Mo @9406 (WWIVnet)
FILE: "QUICK1"
NAME: "Quicktel 14.4 v.32bis/v.42bis Fax/Modem - By Logicode Tech. Inc."
NOTE: "This file has been throughouly tested. It will allow ^M^J"
NOTE: "quick response for 2400 baud callers and provide the ^M^J"
NOTE: "max protocol and compression for high speed callers! ^M^J"
CONF: "AT&F{~~"
SETU: "AT&C1&D2M0TW1S95=44S11=60&W1{"
INIT: "ATZ1~{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=14400 CS=57600 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300 CS=300
RESL: "CARRIER 600" "600" MS=600 CS=600
RESL: "CARRIER 1200" "1200" MS=1200 CS=1200
RESL: "CARRIER 2400" "2400" MS=2400 CS=2400
RESL: "CARRIER 4800" "4800" MS=4800 CS=4800
RESL: "CARRIER 7200" "7200" MS=7200 CS=7200
RESL: "CARRIER 9600" "9600/V.32" MS=9600
RESL: "CARRIER 12000" "12000/V.32bis" MS=12000
RESL: "CARRIER 14400" "14400/V.32bis" MS=14400
RESL: "PROTOCOL: NONE" '' EC=N
RESL: "PROTOCOL: LAP-M" '/LAPM' EC=Y
RESL: "PROTOCOL: LAPM" '/LAPM' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "PROTOCOL: MNP" '/MNP' EC=Y
RESL: "COMPRESSION: NONE" '/NCD' DC=N
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" 'V.42bis' DC=Y
RESL: "CONNECT" MS=300 CS=300 CON
RESL: "CONNECT 600" MS=600 CS=600 CON
RESL: "CONNECT 1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" MS=4800 CS=4800 CON
RESL: "CONNECT 7200" MS=7200 CS=7200 CON
RESL: "CONNECT 9600" CS=9600 CON
RESL: "CONNECT 19200" CS=19200 CON
RESL: "CONNECT 38400" CS=38400 CON
RESL: "CONNECT 57600" CS=57600 CON
##############################################################################
##############################################################################
###
### Finally, miscellaneous modems
###
##############################################################################
##############################################################################
##############################################################################
#
# Cardinal 9650V42 v.32,v.42,v.42bis MNP 1-5 (9650V42 Internal)
# By Lord Vader #1@3402 WWIVnet/IceNET The Empire BBS (304)-465-5223
# 1@1 SuperNET
FILE: "C9650"
NAME: "Cardinal 9650V42"
NOTE: "Lock your Com Port at 38400"
SETU: "ATS0=0S2=1{"
INIT: "AT&FH0B0E0M0Q0V1&C1&D2&K3&Q5&S1\\A3\\G1\\N3W1%C1%E1S2=1S36=7S37=0S46=138S48=7S95=235{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CONNECT" "300" CS=300 CON
RESL: "CONNECT 1200" "1200" CS=1200 CON
RESL: "CONNECT 2400" "2400" CS=2400 CON
RESL: "CONNECT 4800" "4800" CS=4800 CON
RESL: "CONNECT 9600" "9600" CS=9600 CON
RESL: "CONNECT 19200" "19200" CS=19200 CON
RESL: "CONNECT 38400" "38400" CS=38400 CON
RESL: "COMPRESSION CLASS5" '/MNP5' DC=Y
RESL: "COMPRESSION V42BIS" '/V.42bis' DC=Y
RESL: "ARQ" '/Reliable' EC=Y CS=38400
RESL: "PROTOCOL LAPM" '/LAPM' EC=Y CS=38400
RESL: "PROTOCOL ALT" '/MNP' EC=Y CS=38400
RESL: "COMPRESSION NONE" '' DC=N
RESL: "PROTOCOL NONE" '' EC=N
##############################################################################
#
# Digicom Eagle +
#
FILE: "EAGLEPLS"
NAME: "Digicom Eagle +"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "ATV1Q0*E9*F3*M2*N6*P0*Q1M1E0&C1&D2&R0X4H0&C1&W*S1Z{"
INIT: "AT&FV1Q0*E9*F3*M2*N6*P0*Q1M1E0&C1&D2&R0X4S0=1H0*S1Z{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=14400 CS=19200 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CS=12200 CON
RESL: "CONNECT 1200 EC" "1200" MS=1200 CS=19200 EC=Y CON
RESL: "CONNECT 2400 EC" "2400" MS=2400 CS=19200 EC=Y CON
RESL: "CONNECT 4800 EC" "4800" MS=4800 CS=19200 EC=Y CON
RESL: "CONNECT 7200 EC" "7200" MS=7200 CS=19200 EC=Y CON
RESL: "CONNECT 9600 EC" "9600" MS=9600 CS=19200 EC=Y CON
RESL: "CONNECT 12000 EC" "12000" MS=12000 CS=19200 EC=Y CON
RESL: "CONNECT 14400 EC" "14400" MS=14400 CS=19200 EC=Y CON
RESL: "CONNECT 14400" "14400" MS=14400 CS=14400 CON
RESL: "EC" EC=Y CS=19200
RESL: "V42BIS" '/V.42bis' DC=Y
##############################################################################
#
# Turbo Spartan 14.4
#
FILE: "SPARTAN"
NAME: "Turbo Spartan 14.4"
INIT: "AT&F2E0M0H0S0=0S2=1&C1&D2\\V1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "MNP COMPRESSED" '/MNP5' EC=Y DC=Y
RESL: "MNP" '/MNP' EC=Y
RESL: "V42.BIS '/V.42bis' EC=Y DC=Y
RESL: "V42" '/V.42' EC=Y
############################################################################
#
# Digicom Eagle 14400
#
# Be sure to keep the com port set at 19200, or else you'll get too many
# errors while transfering bi-directional.
#
FILE: "DIGIEAGL"
NAME: "Digicom EAGLE/EAGLE+ (v.32bis)"
SETU: "ATV1Q0*E9*F3*M2*N6*P0*Q1M1E0&C1&D2&R0X4H0&C1&W*S1Z{"
INIT: "AT&FV1Q0*E9*F3*M2*N6*P0*Q1M1E0&C1&D2&R0X4S0=1H0*S1Z{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=14400 CS=19200 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 1200" "1200" MS=1200 CS=19200 EC=N DC=N CON
RESL: "CONNECT 1200 EC" "1200/MNP-5" MS=1200 CS=19200 EC=Y DC=Y CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 EC=N DC=N CON
RESL: "CONNECT 2400 EC" "2400/LAPM/V.42bis" MS=2400 CS=2400 EC=Y DC=Y CON
RESL: "CONNECT 4800" "4800" MS=4800 EC=N DC=N CON
RESL: "CONNECT 4800 EC" "4800/V.32/LAPM/V.42bis" MS=4800 CS=38400 EC=Y DC=Y CON
RESL: "CONNECT 7200" "7200" MS=7200 EC=N DC=N CON
RESL: "CONNECT 7200 EC" "7200/V.32/LAPM/V.42bis" MS=7200 CS=38400 EC=Y DC=Y CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 EC=N DC=N CON
RESL: "CONNECT 9600 EC" "9600/V.32/ARQ" MS=19200 CS=19200 EC=Y DC=Y CON
RESL: "CONNECT 12000" "12000" MS=12000 EC=N DC=N CON
RESL: "CONNECT 12000 EC" "12000/V.32bis/LAPM/V.42bis" MS=12000 CS=38400 EC=Y DC=Y CON
RESL: "CONNECT 14400" "14400" MS=14400 CS=14400 EC=N DC=N CON
RESL: "CONNECT 14400 EC" "14400/V.32bis/LAPM/V.42bis" MS=14400 CS=14400 EC=Y DC=Y CON
###########################################################################
#
# AT&T 14.4 DataPort/FAX
#
# By Rambo 1@8856
#
FILE: "ATTDPT"
NAME: "AT&T DataPort 14.4k"
NOTE: "Still Experimental."
SETU: "AT&F&C1&D2Q0V1\\N7{"
INIT: "ATE0M0Q0V1X5S0=0S2=1\\Q3\\G1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: "/"
DEFL: MS=14400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 300" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "REL" '/REL" EC=Y
##############################################################################
#
# Reveal PM500 14.4
#
FILE: "REV144"
NAME: "Reveal PM500 14.4"
INIT: "AT&F2E0H0M0S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 75" "1200" MS=1200 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "MNP COMPRESSED" '/MNP5' EC=Y DC=Y
RESL: "MNP" '/MNP' EC=Y
RESL: "V42BIS" '/V.42bis' EC=Y DC=Y
RESL: "V42" '/V.42' EC=Y
##############################################################################
#
# UDS V.32 9600
#
FILE: "UDS9600"
NAME: "UDS V.32 9600 MNP"
SETU: "ATS0=0&C1&D2&R0%C1S2=43S7=30&W{"
INIT: "ATQ0X4\\V1\\J1\\G0\\B6\\Q3\\A3%E1M0V1&W{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "CONNECT 19200" "9600" MS=9600 CS=19200 CON
RESL: "REL" '/REL' EC=Y DC=Y FC=Y
##############################################################################
#
# Multitech V.32 config. Really should use verbose result codes though.
#
FILE: "MULTI"
NAME: "Multitech V32"
SETU: "AT&FE0X1V0&C1&D2&E1&E4&E7&E13&E15$BA1&W0{"
INIT: "ATH0S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: " "
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "0" "Normal" NORM
RESL: "2" "Ring" RING
RESL: "3" "No Carrier" DIS
RESL: "4" "ERROR" ERR
RESL: "6" "No Dial Tone" NDT
RESL: "7" "Busy" DIS
RESL: "8" "No Answer" DIS
RESL: "1" "300 " MS=300 CS=300 CON
RESL: "5" "1200 " MS=1200 CS=1200 CON
RESL: "9" "2400 " MS=2400 CS=2400 CON
RESL: "11" "4800 " MS=4800 CS=4800 CON
RESL: "12" "9600 " MS=9600 CS=9600 CON
RESL: "9R" "2400/REL " MS=2400 CS=2400 EC=Y DC=N CON
RESL: "9RC" "2400/REL/MNP5" MS=2400 CS=2400 EC=Y DC=Y CON
RESL: "9C" "2400/MNP5 " MS=2400 CS=2400 EC=N DC=Y CON
RESL: "12R" "9600/REL " MS=9600 CS=9600 EC=Y DC=N CON
RESL: "12RC" "9600/REL/MNP5" MS=9600 CS=9600 EC=Y DC=Y CON
RESL: "12C" "9600/MNP5 " MS=9600 CS=9600 EC=N DC=Y CON
RESL: "9RC" "2400/REL/MNP5" MS=2400 CS=2400 EC=Y DC=Y CON
RESL: "1L" " 300/LAPM " MS=300 CS=300 EC=Y DC=N CON
RESL: "5L" "1200/LAPM " MS=1200 CS=1200 EC=Y DC=N CON
RESL: "9L" "2400/LAPM " MS=2400 CS=2400 EC=Y DC=N CON
RESL: "12L" "9600/LAPM " MS=9600 CS=9600 EC=Y DC=N CON
##############################################################################
#
# Fastcomm NetQuest v32D modem - the configuration your momma warned you about
#
FILE: "NETQUEST"
NAME: "NetQuest V.32"
INIT: "~ATE0H0M0Q0V1W2X5{~ATS0=0S2=1S7=60&B0&H1&I1&J0&M6&N0&C1&D2{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "REL" '/REL' EC=Y
RESL: "RELC-96" '/RELC' EC=Y DC=Y
############################################################################
#
# Digicom Scout Plus 14.4k
#
FILE: "DIGISCT"
NAME: "Digicom Scout"
INIT: "AT&FH0E0M0S0=0S2=1{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT EC" "300/ARQ" MS=300 EC=Y CON
RESL: "CONNECT 1200 EC" "1200/ARQ" MS=1200 EC=Y CON
RESL: "CONNECT 2400 EC" "2400/ARQ" MS=2400 EC=Y CON
RESL: "CONNECT 4800 EC" "4800/ARQ" MS=4800 EC=Y CON
RESL: "CONNECT 7200 EC" "7200/ARQ" MS=7200 EC=Y CON
RESL: "CONNECT 9600 EC" "9600/ARQ" MS=9600 EC=Y CON
RESL: "CONNECT 12000 EC" "12000/ARQ" MS=12000 EC=Y CON
RESL: "CONNECT 14400 EC" "14400/ARQ" MS=14400 EC=Y CON
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
##############################################################################
#
# Ven-Tel 9600 Plus / 9600 Plus II / PCM9600
#
# When using a 16550 UART, change CS=38400
FILE: "VENTEL96"
NAME: "Ven-Tel 9600 Plus"
INIT: "AT&F&C1&D2E0M0%F2\\N3\\Q3S0=0S2=1V0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "ABORTED" "Aborted" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "V42 DISCONNECTED" "Bad Line" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT/REL" "300 MNP" MS=300 CON EC=Y DC=Y
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 1200/REL" "1200 MNP" MS=1200 CON EC=Y DC=Y
RESL: "CONNECT 1200/LAPM" "1200 V.42" MS=1200 CON EC=Y DC=Y
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 2400/REL" "2400 MNP" MS=2400 CON EC=Y DC=Y
RESL: "CONNECT 2400/LAPM" "2400 V.42" MS=2400 CON EC=Y DC=Y
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 9600 TRELLIS" "9600" MS=9600 CON
RESL: "CONNECT 9600 TRELLIS/REL" "9600 MNP" MS=9600 CON EC=Y DC=Y
RESL: "CONNECT 9600 TRELLIS/LAPM" "9600 V.42" MS=9600 CON EC=Y DC=Y
RESL: "CONNECT 12000 TRELLIS" "12K Turbo" MS=12000 CON
RESL: "CONNECT 12000 TRELLIS/REL" "Turbo w/MNP" MS=12000 CON EC=Y DC=Y
RESL: "CONNECT 12000 TRELLIS/LAPM" "Turbo w/LAPM" MS=12000 CON EC=Y DC=Y
RESL: "COMPRESS LEVEL 5" "MNP 5" EC=Y DC=Y
RESL: "COMPRESSION NOT AVAILABLE" "NO COMPRESSION" EC=Y
RESL: "COMPRESS V.42bis" "LAPM COMPRESSION" EC=Y DC=Y
##############################################################################
#
# Ven-Tel V.32bis / V.32bis II / PCMV.32bis
#
# When using a 16550 UART, change CS=57600
FILE: "VENTEL32"
NAME: "Ven-Tel V.32bis"
INIT: "AT&F&C1&D2E0M0%F2\\N3\\Q3S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "ABORTED" "Aborted" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "V42 DISCONNECTED" "Bad Line" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT/REL" "300 MNP" MS=300 CON EC=Y DC=Y
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 1200/REL" "1200 MNP" MS=1200 CON EC=Y DC=Y
RESL: "CONNECT 1200/LAPM" "1200 V.42" MS=1200 CON EC=Y DC=Y
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 2400/REL" "2400 MNP" MS=2400 CON EC=Y DC=Y
RESL: "CONNECT 2400/LAPM" "2400 V.42" MS=2400 CON EC=Y DC=Y
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 9600 TRELLIS" "9600" MS=9600 CON
RESL: "CONNECT 9600 TRELLIS/REL" "9600 MNP" MS=9600 CON EC=Y DC=Y
RESL: "CONNECT 9600 TRELLIS/LAPM" "9600 V.42" MS=9600 CON EC=Y DC=Y
RESL: "CONNECT 12000 TRELLIS" "12000" MS=12000 CON
RESL: "CONNECT 12000 TRELLIS/REL" "12000 w/MNP" MS=12000 CON EC=Y DC=Y
RESL: "CONNECT 12000 TRELLIS/LAPM" "12000 w/LAPM" MS=12000 CON EC=Y DC=Y
RESL: "CONNECT 14400 TRELLIS" "V.32bis" MS=14400 CON
RESL: "CONNECT 14400 TRELLIS/REL" "V.32bis w/MNP" MS=14400 CON EC=Y DC=Y
RESL: "CONNECT 14400 TRELLIS/LAPM" "V.32bis w/LAPM" MS=14400 CON EC=Y DC=Y
RESL: "COMPRESS LEVEL 5" "MNP 5" EC=Y DC=Y
RESL: "COMPRESSION NOT AVAILABLE" "NO COMPRESSION" EC=Y
RESL: "COMPRESS V.42bis" "LAPM COMPRESSION" EC=Y DC=Y
##########################################################################
#
# Hayes SmartModem 9600
#
# by Ray De La Cruz 1@7453 "Healthcare Ethics BBS - Orange, CA"
# (714)-744-3798 * 24Hours/Everyday
#
FILE: "HSMART"
NAME: "Hayes V-Series SmartModem 9600"
NOTE: "Configurations are based on Hayes Programmer's Technical Reference"
SETU: ""
INIT: "ATE1Q0W1M0X4V1S11=55&C1&D2&H0&J0&K3&L0&P0&Q5S95=32S2=1S0=0&W{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=9600 EC=N DC=N AS=Y FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 600" "600" MS=600
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "PROTOCOL: NONE" '' EC=N
RESL: "PROTOCOL: ERROR-CONTROL/LAP-B" '/LAPB' EC=Y
RESL: "PROTOCOL: ERROR-CONTROL/LAP-B/HDX" '/LAPB/HDX' EC=Y
RESL: "PROTOCOL: ERROR-CONTROL/LAP-B/AFT" '/LAPB/AFT' EC=Y
RESL: "PROTOCOL: X.25/LAP-B" '/X.25/LAPB' EC=Y
RESL: "PROTOCOL: X.25/LAP-B/HDX" '/X.25/LAPB/HDX' EC=Y
RESL: "PROTOCOL: X.25/LAP-B/AFT" '/X.25/LAPB/AFT' EC=Y
RESL: "PROTOCOL: LAP-M" '/V.42/LAPM' EC=Y
RESL: "PROTOCOL: LAP-M/HDX V.42" '/V.42/LAPM/HDX' EC=Y
RESL: "PROTOCOL: LAP-M/AFT" '/V.42/LAPM/AFT' EC=Y
RESL: "PROTOCOL: ALT" '/V.42/LAPM/MNP' EC=Y
RESL: "COMPRESSION: NONE" '' DC=N
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: V.42 BIS" '/V.42bis' DC=Y
RESL: "COMPRESSION: ADC" '/ADC' DC=Y
RESL: "CONNECT" '' CON
RESL: "CONNECT 600" '' CON
RESL: "CONNECT 0600" '' CON
RESL: "CONNECT 1200" '' CON
RESL: "CONNECT 2400" '' CON
RESL: "CONNECT 4800" '' CON
RESL: "CONNECT 7200" '' CON
RESL: "CONNECT 9600" '' CON
RESL: "CONNECT 19200" '' CON
RESL: "CONNECT 38400" '' CON
##########################################################################
#
# Hayes Optima 9600 Smartmodem
#
# Information from Dungeon Master 1@5293 WWIVnet on 10/03/92
#
FILE: "HOPTIMA"
NAME: "Hayes Optima"
NOTE: "Configuration for the Hayes Optima is still preliminary."
SETU: "AT&FM0H0W1S0=0S2=1&C1&D2{"
INIT: "AT&Q5V1W1X4Y0&U1&A0&K3&R1&S1Q0N1M0&D2E0&J0&C1&D2S37=9S36=5S48=7S46=138S95=47S11=55{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "PROTOCOL: LAP-M" '/LAP-M' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
##############################################################################
#
# ZyXEL U-1496 MODEMS
#
#
FILE: "U-1496X"
NAME: "ZyXEL HIGH SPEED MODEM, U-1496, U-1496E, U-1496B"
CONF: "ATZ{~~~~~~~AT{~~AT&W{"
SETU: "AT&FE0H0M0N0X7&D2{~~AT&H3&N0S0=0S2=1&W{"
INIT: "ATB0H0M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATB1DT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=Y DC=Y AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RINGING" "Ringing" RINGING
RESL: "VOICE" "Voice" DIS
RESL: "CONNECT" "300" MS=300 CS=38400 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=38400 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=38400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=38400 CON
RESL: "CONNECT 7200" "7200" MS=7200 CS=38400 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=38400 CON
RESL: "CONNECT 12000" "12000" MS=12000 CS=38400 CON
RESL: "CONNECT 14400" "14400" MS=14400 CS=38400 CON
RESL: "CONNECT 16800" "16800" MS=16800 CS=38400 CON
RESL: "ARQ" EC=Y CS=38400
RESL: "MNP3" '/MNP3' EC=Y
RESL: "V32" '/V.32' EC=N
RESL: "MNP4" '/MNP4' EC=Y
RESL: "V42" '/V.42' EC=Y
RESL: "MNP5" '/MNP5' DC=Y
RESL: "V42b" '/V.42bis' DC=Y
RESL: "NONE" EC=N
##############################################################################
#
# E-Tech Bullet E9696M V.32/V.42bis
#
FILE: "E9696M"
NAME: "E-Tech Bullet E9696M V.32/V.42bis"
SETU: "AT&FE0H0M0X4&C1&D2$F4$S1$X4S0=0S2=1{"
INIT: "ATM0Q0H0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: " "
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "DIAL" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "1200" "1200" MS=1200
RESL: "2400" "2400" MS=2400
RESL: "4800" "4800" MS=4800
RESL: "9600" "9600" MS=9600
RESL: "19200" "19200" MS=19200
RESL: "RELIABLE" '/REL' EC=Y
RESL: "COMPRESSED" '/COMP' DC=Y
##############################################################################
#
# Identity 9600
#
FILE: "IDENT"
NAME: "Identity 9600 MNP"
SETU: "AT&FE0M0%C1\\G1\\N3\\Q3{"
INIT: "ATM0Q0V1X4S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 9600T" "9600" MS=9600 CON
RESL: "REL" '/MNP' EC=Y
RESL: "REL COMPRESSED" '/MNP5' EC=Y DC=Y
##############################################################################
#
# Identity 9600 with v.42bis
#
FILE: "IDENTV42"
NAME: "Identity 9600 V.42bis"
SETU: "AT&F2E0M0%C1\\G1\\N6\\Q3{"
INIT: "ATM0Q0V1X4S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 9600T" "9600" MS=9600 CON
RESL: "MNP COMPRESSED" '/MNP5' EC=Y DC=Y
RESL: "MNP" '/MNP' EC=Y
RESL: "V42BIS" '/LAPM/V.42bis' EC=Y DC=Y
RESL: "V42" '/LAPM' EC=Y
##############################################################################
#
# Identity 14400 with v.42bis
#
FILE: "IDENT144"
NAME: "Identity 14400"
SETU: "AT&F2E0M0%C1\\G1\\N6\\Q3\\V1{"
INIT: "ATM0Q0V1X4S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "MNP COMPRESSED" '/MNP5' EC=Y DC=Y
RESL: "MNP" '/MNP' EC=Y
RESL: "V42BIS" '/LAPM/V.42bis' EC=Y DC=Y
RESL: "V42" '/LAPM' EC=Y
##############################################################################
#
# Compucom modem
#
# Can't tell MNP4 vs MNP5
#
FILE: "COMPUCOM"
NAME: "CompuCom SpeedModem"
SETU: "AT+F&F2*H2E0M0&C1&D2X4S0=0S2=1H0&W{"
INIT: "~~ATM0H0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=19200 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "REL" '/REL' EC=Y
##############################################################################
#
# Compucom STAR
#
FILE: "COMPSTAR"
NAME: "CompuCom STAR"
SETU: "AT&F2\\N3%C1Q0V1E0S0=0S2=1&C1&D2X4{"
INIT: "~~ATM0H0*H2\\J0\\V1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: "/"
DEFL: MS=14400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "REL" '/REL' EC=Y
###############################################################################
#
# Compucom Champ modem after 8-1-91
#
FILE: "COMPCHMP"
NAME: "CompuCom Champ after 8-1-91"
SETU: "~~~AT&F2*H2%C1S25=2M0Q0V1E0S0=0S2=1&D2{"
INIT: "~~ATH0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=19200 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=19200 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=19200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=19200 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=19200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=19200 CON
RESL: "REL" '/REL' EC=Y
##########################################################################
#
# Hayes Ultra
#
FILE: "HULTRA"
NAME: "Hayes Ultra"
SETU: "AT&FM0H0W1S0=0S2=1&C1&D2{"
INIT: "ATM0H0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CARRIER 300" "300" MS=300
RESL: "CARRIER 1200/75" "1200/75" MS=1200
RESL: "CARRIER 75/1200" "75/1200" MS=75
RESL: "CARRIER 1200" "1200" MS=1200
RESL: "CARRIER 2400" "2400" MS=2400
RESL: "CARRIER 4800" "4800" MS=4800
RESL: "CARRIER 7200" "7200" MS=7200
RESL: "CARRIER 9600" "9600" MS=9600
RESL: "CARRIER 12000" "12000" MS=12000
RESL: "CARRIER 14400" "14400" MS=14400
RESL: "PROTOCOL: LAP-M" '/LAP-M' EC=Y
RESL: "PROTOCOL: ALT" '/MNP' EC=Y
RESL: "COMPRESSION: CLASS 5" '/MNP5' DC=Y
RESL: "COMPRESSION: V.42BIS" '/V.42bis' DC=Y
RESL: "CONNECT" '' CS=300 CON
RESL: "CONNECT 0600" '' CS=600 CON
RESL: "CONNECT 1200" '' CS=1200 CON
RESL: "CONNECT 2400" '' CS=2400 CON
RESL: "CONNECT 4800" '' CS=4800 CON
RESL: "CONNECT 7200" '' CS=7200 CON
RESL: "CONNECT 9600" '' CS=9600 CON
RESL: "CONNECT 19200" '' CS=19200 CON
RESL: "CONNECT 38400" '' CS=38400 CON
##############################################################################
#
# Microcom QX/V.32C
#
FILE: "MCQXV32"
NAME: "Microcom QX/V.32c"
SETU: "AT&FE0Q0V1\\V1\\G0S0=0S2=1\\Q2{"
INIT: "ATH0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 103" "300" MS=300 CON
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "REL" '/REL' EC=Y DC=Y
##############################################################################
#
# Racal-vadic 9632
#
FILE: "RACAL"
NAME: "RACAL 9632"
SETU: "AT&FE0M0&D2S2=1S0=0X9{"
INIT: "ATH0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT 103" "300" MS=300
RESL: "CONNECT" "300" MS=300
RESL: "CONNECT 1200" "1200" MS=1200
RESL: "CONNECT 2400" "2400" MS=2400
RESL: "CONNECT 4800" "4800" MS=4800
RESL: "CONNECT 9600" "9600" MS=9600
RESL: "ERROR CONTROL" '/MNP' EC=Y
RESL: "NO ERROR CONTROL" '' EC=N
RESL: "CLASS 5 COMPRESSION" '/MNP5' DC=Y CON
RESL: "NO DATA COMPRESSION" '' DC=N CON
##############################################################################
#
# Racal-vadic 9632
#
FILE: "RACAL1"
NAME: "Racal Vadic 9632PA model 2/Racal RMD 3222 Settings"
SETU: "ATV1Q0X4E0M0H0 S0=0{"
INIT: "ATX4 S9=10 S7=60 &C1 &D2 &Q0 \\V1\\N3\\B1\\Q1,1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "{{{"
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=19200
RESL: "CONNECT 1200" "1200" MS=1200 CS=19200
RESL: "CONNECT 2400" "2400" MS=2400 CS=19200
RESL: "CONNECT 1275" "12.75" MS=1275 CS=19200
RESL: "CONNECT 4800" "4800" MS=4800 CS=19200
RESL: "CONNECT 9600" "9600" MS=9600 CS=19200
RESL: "CONNECT 14.4" "14,400" MS=14400 CS=19200
RESL: "MNP 19200" '/MNP' CON EC=Y DC=Y
RESL: "v42 19200" '/V.42' CON EC=Y DC=Y
RESL: "v42bis 19200" '/V.42bis' CON EC=Y DC=Y
RESL: "BUFFER 19200" '/BUFFER' CON EC=N DC=N
###############################################################################
#
# ATI 9600/etc/e
#
FILE: "ATI9600"
NAME: "ATI 9600ETC/E"
CONF: "AT&F2&C1&D2H0E0V0W2X6S11=55S7=75S38=255&W0&Y0{"
INIT: "ATZ{"
SETU: ""
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "0" "Normal" NORM
RESL: "2" "Ring" RING
RESL: "1" "300" CON MS=300
RESL: "3" "No Carrier" DIS
RESL: "4" "Error" ERR
RESL: "5" "1200" CON MS=1200
RESL: "6" "No Dial Tone" NDT
RESL: "7" "Busy" DIS
RESL: "8" "No Answer" DIS
RESL: "18" "Ringing" RINGING
RESL: "19" "Voice" DIS
RESL: "10" "2400" CON MS=2400
RESL: "11" "4800" CON MS=4800
RESL: "12" "9600" CON MS=9600
RESL: "14" "19200" CON MS=9600
RESL: "16" "38400" CON MS=9600
RESL: "20" "300/MNP" CON MS=300 EC=Y DC=Y
RESL: "22" "1200/MNP" CON MS=1200 EC=Y DC=Y
RESL: "23" "2400/MNP" CON MS=2400 EC=Y DC=Y
RESL: "24" "1200/LAPM" CON MS=1200 EC=Y DC=Y
RESL: "25" "2400/LAPM" CON MS=2400 EC=Y DC=Y
RESL: "31" "4800/MNP" CON MS=4800 EC=Y DC=Y
RESL: "33" "9600/MNP" CON MS=9600 EC=Y DC=Y
RESL: "34" "4800/LAPM" CON MS=4800 EC=Y DC=Y
RESL: "35" "9600/LAPM" CON MS=9600 EC=Y DC=Y
###############################################################################
#
# Anchor Patriot 96iR 9600
#
FILE: "APAT96IR"
NAME: "Anchor Patriot 96iR 9600"
INIT: "AT&FE0H0M0&D2\\N3\\Q3\\V1S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "eRROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CS=9600 CON
RESL: "REL" '/REL' CS=19200 EC=Y
###############################################################################
#
# Worldport 9600
#
FILE: "WP9600"
NAME: "Worldport 9600"
INIT: "AT&FE0H0M0X4\\N3\\J0\\Q3\\V1S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "eRROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 600" "600" MS=600 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "REL" '/REL' EC=Y
##############################################################################
#
# Intel 9600EX
#
FILE: "I9600EX"
NAME: "Intel 9600EX"
NOTE: "Configuration still preliminary."
SETU: "AT&FE0H0M0\\X1S0=0S2=1{"
INIT: "ATH0{"
ANSR: "~ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "REL-LAPM-COMP" '/LAPM/V.42bis' EC=Y DC=Y
RESL: "REL-LAPM" '/LAPM' EC=Y
RESL: "REL-MNP-COMP" '/MNP/MNP5' EC=Y DC=Y
RESL: "REL-MNP" '/MNP' EC=Y
##############################################################################
#
# Intel 14.4 EX
#
FILE: "IN-144EX"
NAME: "Intel 14.4 EX"
NOTE: "Configuration Used By Life Arts Network BBS @9443"
SETU: "ATH0 &F M0V0E0Q0 X4 %E2 &C1&D2 S0=0 S2=1 {"
INIT: "ATH0 &F M0V0E0Q0 X4 %E2 &C1&D2 S0=0 S2=1 {"
ANSR: "~ATA{"
PICK: "~ATH1{"
HANG: "ATH0{"
DIAL: "~ATDT"
SEPR: "/"
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "0" "OK" NORM
RESL: "2" "RING" RING
RESL: "3" "NO CARRIER" DIS
RESL: "4" "ERROR" ERR
RESL: "5" "[ 1200 | NORMAL ======]" MS=1200 CS=19200 CON
RESL: "6" "NO DIAL TONE" NDT
RESL: "7" "BUSY" DIS
RESL: "8" "NO ANSWER" DIS
RESL: "10" "[ 2400 | NORMAL ======]" MS=2400 CS=19200 CON
RESL: "11" "[ 4800 | NORMAL ======]" MS=4800 CS=19200 CON
RESL: "12" "[ 9600 | NORMAL ======]" MS=9600 CS=19200 CON
RESL: "15" "[ 7200 | NORMAL ======]" MS=7200 CS=19200 CON
RESL: "16" "[12000 | NORMAL ======]" MS=12000 CS=19200 CON
RESL: "17" "[14400 | NORMAL ======]" MS=14400 CS=19200 CON
RESL: "22" "[ 300 | REL =========]" MS=300 CS=19200 CON EC=Y
RESL: "24" "[ 1200 | REL =========]" MS=1200 CS=19200 CON EC=Y
RESL: "25" "[ 2400 | REL =========]" MS=2400 CS=19200 CON EC=Y
RESL: "26" "[ 4800 | REL =========]" MS=4800 CS=19200 CON EC=Y
RESL: "27" "[ 7200 | REL =========]" MS=7200 CS=19200 CON EC=Y
RESL: "28" "[ 9600 | REL =========]" MS=9600 CS=19200 CON EC=Y
RESL: "29" "[12000 | REL =========]" MS=12000 CS=19200 CON EC=Y
RESL: "30" "[14400 | REL =========]" MS=14400 CS=19200 CON EC=Y
RESL: "32" "[ 300 | REL-MNP =====]" MS=300 CS=19200 CON EC=Y
RESL: "34" "[ 1200 | REL-MNP =====]" MS=1200 CS=19200 CON EC=Y
RESL: "35" "[ 2400 | REL-MNP =====]" MS=2400 CS=19200 CON EC=Y
RESL: "36" "[ 4800 | REL-MNP =====]" MS=4800 CS=19200 CON EC=Y
RESL: "37" "[ 7200 | REL-MNP =====]" MS=7200 CS=19200 CON EC=Y
RESL: "38" "[ 9600 | REL-MNP =====]" MS=9600 CS=19200 CON EC=Y
RESL: "39" "[12000 | REL-MNP =====]" MS=12000 CS=19200 CON EC=Y
RESL: "40" "[14400 | REL-MNP =====]" MS=14400 CS=19200 CON EC=Y
RESL: "44" "[ 1200 | REL-MNP-COMP ]" MS=1200 CS=19200 CON EC=Y DC=Y
RESL: "45" "[ 2400 | REL-MNP-COMP ]" MS=2400 CS=19200 CON EC=Y DC=Y
RESL: "46" "[ 4800 | REL-MNP-COMP ]" MS=4800 CS=19200 CON EC=Y DC=Y
RESL: "47" "[ 7200 | REL-MNP-COMP ]" MS=7200 CS=19200 CON EC=Y DC=Y
RESL: "48" "[ 9600 | REL-MNP-COMP ]" MS=9600 CS=19200 CON EC=Y DC=Y
RESL: "49" "[12000 | REL-MNP-COMP ]" MS=12000 CS=19200 CON EC=Y DC=Y
RESL: "50" "[14400 | REL-MNP-COMP ]" MS=14400 CS=19200 CON EC=Y DC=Y
RESL: "54" "[ 1200 | REL-LAPM ====]" MS=1200 CS=19200 CON EC=Y
RESL: "55" "[ 2400 | REL-LAPM ====]" MS=2400 CS=19200 CON EC=Y
RESL: "56" "[ 4800 | REL-LAPM ====]" MS=4800 CS=19200 CON EC=Y
RESL: "57" "[ 7200 | REL-LAPM ====]" MS=7200 CS=19200 CON EC=Y
RESL: "58" "[ 9600 | REL-LAPM ====]" MS=9600 CS=19200 CON EC=Y
RESL: "59" "[12000 | REL-LAPM ====]" MS=12000 CS=19200 CON EC=Y
RESL: "60" "[14400 | REL-LAPM ====]" MS=14400 CS=19200 CON EC=Y
RESL: "64" "[ 1200 | REL-LAPM-COMP]" MS=1200 CS=19200 CON EC=Y DC=Y
RESL: "65" "[ 2400 | REL-LAPM-COMP]" MS=2400 CS=19200 CON EC=Y DC=Y
RESL: "66" "[ 4800 | REL-LAPM-COMP]" MS=4800 CS=19200 CON EC=Y DC=Y
RESL: "67" "[ 7200 | REL-LAPM-COMP]" MS=7200 CS=19200 CON EC=Y DC=Y
RESL: "68" "[ 9600 | REL-LAPM-COMP]" MS=9600 CS=19200 CON EC=Y DC=Y
RESL: "69" "[12000 | REL-LAPM-COMP]" MS=12000 CS=19200 CON EC=Y DC=Y
RESL: "70" "[14400 | REL-LAPM-COMP]" MS=14400 CS=19200 CON EC=Y DC=Y
##############################################################################
#
# Micro Integrated Communications Series 9600
#
FILE: "MICC9600"
NAME: "MICC Series 9600 V32/V.42"
INIT: "AT&FE0H0M0V1\\C1\\N9\\Q3S0=0S2=1{"
SETU: "AT&C1&D2Q0V1M0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=19200 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "REL" '/MNP' EC=Y
RESL: "REL 4" '/MNP-4' EC=Y
RESL: "REL 5" '/MNP-5' EC=Y DC=Y
RESL: "V42" '/V.42' EC=Y
RESL: "V42BIS" /V.42bis' EC=Y DC=Y
##############################################################################
#
# Cardinal 9600bps MNP4-5 v32 Internal Modem
#
# Modem Init String implented for WWIV v4.20e by Synopsis
# If you still have trouble getting your INTERNAL Cardinal
# 9600/V32 modem to work properly feel free to contact me
# via WWIVnet as 1@5273.
#
# This Modem Init Section was modified by Galen Pathwarden.
# If you STILL have trouble, either contact Synopsis at the above address,
# or contact Galen Pathwarden via WWIVNet as 1@7313, or WWIVLink as 1@17303
#
# Or call File Not Found - WWIVnet @5273 - (512)428-4112
# as of Nov. 92' (210)428-4112
# OR call The Church - WWIVNet @7313 - (703)978-4611
# WWIVLink @17303
FILE: "C964I"
NAME: "Cardinal 9600/v32 INTERNAL Modem"
CONF: "AT&F{~~~AT&W{~~~
SETU: "AT&C1&D3C0E0Q0V1S46=0H0&M6&B1X4S2=1S0=0{"
INIT: "ATX4H0M0&M6&B1&I1&H1S46=0{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
# If you have problems connecting when dialing out, change the above
# line to:
# DIAL: "AT&M0&B0DT"
SEPR: "/-"
DEFL: MS=0 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "RING" "Ring" RING
RESL: "CONNECT 300" "" DC=N EC=N CS=300 CON
RESL: "CONNECT 1200" "" DC=N EC=N CS=1200 CON
RESL: "CONNECT 2400" "" DC=N EC=N CS=2400 CON
RESL: "CONNECT 4800" "" DC=N EC=N CS=4800 CON
RESL: "CONNECT 9600" "" DC=N EC=N CS=9600 CON
RESL: "CONNECT 19200" "" DC=N EC=N CS=19200 CON
RESL: "3" "300" MS=300
RESL: "12" "1200" MS=1200
RESL: "24" "2400" MS=2400
RESL: "48" "4800" MS=4800
RESL: "96" "9600" MS=9600
RESL: "BUFF" "" DC=N EC=N
RESL: "REL" "/MNP4" DC=Y EC=N
RESL: "RELC" "/V32/MNP5" DC=Y EC=Y
##############################################################################
#
# Okitel 9600
#
FILE: "OK9600"
NAME: "OKITEL 9600"
INIT: "AT&F&C1&D2E0H0&K3M0\\Q3\\N3W2S2=1Q0V1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=9600 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "REL" '/REL' EC=Y
##############################################################################
#
# Telebit WorldBlazer running at 57600 with NS16550AFN FIFO chips
#
# By Handles 1@8369 TruckStop Tampa, Florida
#
FILE: "WBLAZFAS"
NAME: "Telebit WorldBlazer using NS16550AFN FIFO UART chip"
NOTE: "Before running this mdm. Please use a Communication program to setup the^M^J"
NOTE: "modem for first use. In terminal mode, type in AT&FS51=7&W and have the Comm^M^J"
NOTE: "program locked at 57600."
CONF: "AT&F9S51=7&W{"
INIT: "AT&F9E0M0X2S2=1S59=3S51=7S92=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=57600 CS=57600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RRING" "Ringing" RINGING
RESL: "CONNECT 300" "300" CON CS=57600 MS=57600
RESL: "CONNECT 1200" "1200" CON CS=57600 MS=57600
RESL: "CONNECT 1275" "1275" CON CS=57600 MS=57600
RESL: "CONNECT 7512" "7512" CON CS=57600 MS=57600
RESL: "CONNECT 2400" "2400" CON CS=57600 MS=57600
RESL: "CONNECT 4800" "4800" CON CS=57600 MS=57600
RESL: "CONNECT 7200" "7200" CON CS=57600 MS=57600
RESL: "CONNECT 9600" "9600" CON CS=57600 MS=57600
RESL: "CONNECT 12000" "12000" CON CS=57600 MS=57600
RESL: "CONNECT 14400" "14400" CON CS=57600 MS=57600
RESL: "CONNECT FAST" "FAST" CON CS=57600 MS=57600
RESL: "REL" '/MNP' EC=Y CS=57600
RESL: "LAPM" '/LAPM' EC=Y CS=57600
RESL: "COMP" '/COMP' DC=Y CS=57600
##############################################################################
#
# Telebit WorldBlazer By Handles 1@8369 TruckStop Tampa, Florida
#
# Running slow or unbuffered NS16450 or 8250 UART chips
#
FILE: "WBLAZER"
NAME: "Telebit WorldBlazer using slow unbuffered UART chip"
CONF: "AT&F9S51=6&W{"
INIT: "AT&F9E0M0X2S2=1S59=3S51=6S92=1{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RRING" "Ringing" RINGING
RESL: "CONNECT 300" "300" CON CS=38400 MS=38400
RESL: "CONNECT 1200" "1200" CON CS=38400 MS=38000
RESL: "CONNECT 1275" "1275" CON CS=38400 MS=38400
RESL: "CONNECT 7512" "7512" CON CS=38400 MS=38400
RESL: "CONNECT 2400" "2400" CON CS=38400 MS=38400
RESL: "CONNECT 4800" "4800" CON CS=38400 MS=38400
RESL: "CONNECT 7200" "7200" CON CS=38400 MS=38400
RESL: "CONNECT 9600" "9600" CON CS=38400 MS=38400
RESL: "CONNECT 12000" "12000" CON CS=38400 MS=38400
RESL: "CONNECT 14400" "14400" CON CS=38400 MS=38400
RESL: "CONNECT FAST" "FAST" CON CS=38400 MS=38400
RESL: "REL" '/MNP' EC=Y CS=38400
RESL: "LAPM" '/LAPM' EC=Y CS=38400
RESL: "COMP" '/COMP' DC=Y CS=38400
##############################################################################
#
# Telebit T3000 By Blann Firestone, Telebit Tech Support; 800/835-3248
#
# Running slow or unbuffered NS16450 or 8250 UART chips
#
FILE: "T3000"
NAME: "Telebit T3000 using slow unbuffered UART chip"
CONF: "AT&F9S51=6&W{"
INIT: "AT&F9E0M0X2S2=1S59=3S51=6{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RRING" "Ringing" RINGING
RESL: "CONNECT 300" "300" CON CS=38400 MS=38400
RESL: "CONNECT 1200" "1200" CON CS=38400 MS=38000
RESL: "CONNECT 1275" "1275" CON CS=38400 MS=38400
RESL: "CONNECT 7512" "7512" CON CS=38400 MS=38400
RESL: "CONNECT 2400" "2400" CON CS=38400 MS=38400
RESL: "CONNECT 4800" "4800" CON CS=38400 MS=38400
RESL: "CONNECT 7200" "7200" CON CS=38400 MS=38400
RESL: "CONNECT 9600" "9600" CON CS=38400 MS=38400
RESL: "CONNECT 12000" "12000" CON CS=38400 MS=38400
RESL: "CONNECT 14400" "14400" CON CS=38400 MS=38400
RESL: "REL" '/MNP' EC=Y CS=38400
RESL: "LAPM" '/LAPM' EC=Y CS=38400
RESL: "COMP" '/COMP' DC=Y CS=38400
##############################################################################
#
# Telebit T1600 By Blann Firestone, Telebit Tech Support; 800/835-3248
#
# For use with 16450 or 8250 UART chips
#
FILE: "T1600"
NAME: "Telebit T1600"
CONF: "AT&F9S51=6&W{"
INIT: "AT&F9E0M0X2S2=1S59=3S51=6{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RRING" "Ringing" RINGING
RESL: "CONNECT 300" "300" CON CS=38400 MS=38400
RESL: "CONNECT 1200" "1200" CON CS=38400 MS=38000
RESL: "CONNECT 1275" "1275" CON CS=38400 MS=38400
RESL: "CONNECT 7512" "7512" CON CS=38400 MS=38400
RESL: "CONNECT 2400" "2400" CON CS=38400 MS=38400
RESL: "CONNECT 4800" "4800" CON CS=38400 MS=38400
RESL: "CONNECT 7200" "7200" CON CS=38400 MS=38400
RESL: "CONNECT 9600" "9600" CON CS=38400 MS=38400
RESL: "CONNECT 12000" "12000" CON CS=38400 MS=38400
RESL: "CONNECT 14400" "14400" CON CS=38400 MS=38400
RESL: "CONNECT FAST" "FAST" CON CS=38400 MS=38400
RESL: "REL" '/MNP' EC=Y CS=38400
RESL: "LAPM" '/LAPM' EC=Y CS=38400
RESL: "COMP" '/COMP' DC=Y CS=38400
##############################################################################
#
# Telebit Qblazer By Blann Firestone, Telebit Tech Support; 800/835-3248
#
# For use with 16450 or 8250 UART chips
#
FILE: "QBLAZER"
NAME: "Telebit QBlazer"
CONF: "AT&FS51=6S58=2S59=3&W{"
INIT: "AT&FE0M0X2&D2S2=1S51=6S58=2S59=3{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "RRING" "Ringing" RINGING
RESL: "CONNECT 300" "300" CON CS=38400 MS=38400
RESL: "CONNECT 1200" "1200" CON CS=38400 MS=38000
RESL: "CONNECT 1275" "1275" CON CS=38400 MS=38400
RESL: "CONNECT 7512" "7512" CON CS=38400 MS=38400
RESL: "CONNECT 2400" "2400" CON CS=38400 MS=38400
RESL: "CONNECT 4800" "4800" CON CS=38400 MS=38400
RESL: "CONNECT 7200" "7200" CON CS=38400 MS=38400
RESL: "CONNECT 9600" "9600" CON CS=38400 MS=38400
RESL: "CONNECT 12000" "12000" CON CS=38400 MS=38400
RESL: "CONNECT 14400" "14400" CON CS=38400 MS=38400
RESL: "REL" '/MNP' EC=Y CS=38400
RESL: "LAPM" '/LAPM' EC=Y CS=38400
RESL: "COMP" '/COMP' DC=Y CS=38400
###############################################################################
#
# Packard Bell PB9600PLUS 9600 V.32 V.42 V.42BIS
#
FILE: "PACBELL"
NAME: "Packard Bell"
INIT: "AT&F2%C1%T0&D2\N6S0=0V0\V0E0Q0X4M0S2=1S7=30H0S11=50{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: ""
DEFL: MS=38400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "0" "OK" NORM
RESL: "2" "Ring" RING
RESL: "1" "300" CON MS=300
RESL: "3" "No Carrier" DIS
RESL: "4" "Error" DIS
RESL: "5" "1200" CON MS=1200
RESL: "6" "No Dial Tone" DIS
RESL: "7" "Busy" DIS
RESL: "8" "No Answer" DIS
RESL: "10" "2400" CON MS=2400
RESL: "11" "4800" CON MS=4800
RESL: "12" "9600" CON MS=9600
RESL: "13" "9600T/v.32" CON MS=9600
RESL: "14" "300/REL" CON MS=300
RESL: "15" "1200/REL/MNP4" CON MS=1200
RESL: "16" "2400/REL/MNP4" CON MS=2400
RESL: "17" "4800/REL/MNP4" CON MS=4800
RESL: "18" "9600/REL/MNP4" CON MS=9600
RESL: "19" "9600T/REL/MNP4" CON MS=9600
RESL: "20" "300/REL/MNP5" CON MS=300
RESL: "21" "1200/REL/MNP5" CON MS=1200
RESL: "22" "2400/REL/MNP5" CON MS=2400
RESL: "23" "4800/REL/MNP5" CON MS=1200
RESL: "24" "9600/REL/MNP5" CON MS=2400
RESL: "25" "9600T/REL/MNP5" CON MS=9600
RESL: "26" "300/REL/v.42" CON MS=300
RESL: "27" "1200/REL/v.42" CON MS=1200
RESL: "28" "2400/LAP-M/v.42" CON MS=2400
RESL: "29" "4800/LAP-M/v.42" CON MS=4800
RESL: "30" "9600/LAP-M/v.42" CON MS=9600
RESL: "31" "9600T/LAP-M/v.42" CON MS=9600
RESL: "32" "300/LAP-M/v.42bis" CON MS=300
RESL: "33" "1200/LAP-M/v.42bis" CON MS=1200
RESL: "34" "2400/LAP-M/v.42bis" CON MS=2400
RESL: "35" "4800/LAP-M/v.42bis" CON MS=4800
RESL: "36" "9600/LAP-M/v.42bis" CON MS=9600
RESL: "37" "9600T/LAP-M/v.42bis" CON MS=9600
###############################################################################
#
# Galaxy UFO V.32bis
#
FILE: "GALAXY"
NAME: "Galaxy UFO V.32bis/V.42bis"
INIT: "AT&D2&C1{~ATE0H0M0Q0V1W2X4{~AT\\N6\\Q3{~ATS0=0S2=1S11=40S7=20{"
SETU: "ATZ{~"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATH0DT"
SEPR: "/"
DEFL: MS=14400 CS=19200 EC=N DC=N AS=N FC=Y
RESL: "0" "Normal" NORM
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "ERROR" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800/V.32" MS=4800 CON
RESL: "CONNECT 9600" "9600/V.32" MS=9600 CON
RESL: "CONNECT 12000" "12000/V.32bis" MS=12000 CON
RESL: "CONNECT 14400" "14400/V.32bis" MS=14400 CON
RESL: "REL" '/REL' DC=N EC=Y
RESL: "MNP 5" '/ARQ' DC=Y EC=Y
RESL: "V42" '/V.42' DC=N EC=Y
RESL: "V42bis" '/V.42bis' DC=Y EC=Y
########################################################################
#
# NEC N2431 External 2400/MNP5
# by Buckaroo Banzai 1@13467 (WWIVLink)
#
FILE: "NECMNP"
NAME: "NEC 2431E Modem with MNP Level 5"
NOTE: "Try it, anyway... "
CONF: "AT{"
SETU: "AT&C1&D2&E0&R2&S1{"
INIT: "AT&C1&D2&E0&R2&S1B1E0H0M0Q0V1X4{"
ANSR: "ATA{"
PICK: "ATH1{"
HANG: "ATH0{"
DIAL: "ATDT"
SEPR: "/"
DEFL: MS=2400 CS=9600 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 300" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "ARQ" '/ARQ' EC=Y DC=Y
##############################################################################
#
# "GVC 14.4 V.32bis/V.42bis/MNP5"
#
# Works with GVC external modem, and TurboModemPlus from PC Logic.
#
#
FILE: "GVC144"
NAME: "GVC 144000 V.42bis/MNP5"
NOTE: "Written by Jessica Lovecraft 1@5462 WWIVnet"
SETU: "AT&F2&C1&D2H0Q0V0%C1S7=45S11=50{"
INIT: "ATE0M0H0Q0V0X4\\V1\\Q3\\X0\\N6S0=0S2=1{"
ANSR: "ATA{"
PICK: "ATM0H1{"
HANG: "ATH0{"
DIAL: "~~ATH0DT"
SEPR: ""
DEFL: MS=14400 CS=57600 EC=N DC=N AS=N FC=Y
RESL: "0" "OK" NORM
RESL: "1" "300" MS=300 CON
RESL: "2" "RING" RING
RESL: "3" "NO CARRIER" DIS
RESL: "4" "ERROR" ERR
RESL: "5" "1200" MS=1200 CON
RESL: "6" "No Dialtone" NDT
RESL: "7" "Busy" DIS
RESL: "8" "No Answer" DIS
RESL: "10" "2400" MS=2400 CON
RESL: "11" "4800" MS=4800 CON
RESL: "12" "7200" MS=7200 CON
RESL: "13" "9600" MS=9600 CON
RESL: "14" "12000" MS=12000 CON
RESL: "15" "14400" MS=14400 CON
RESL: "16" "300/MNP" MS=300 CON EC=Y
RESL: "17" "1200/MNP" MS=1200 CON EC=Y
RESL: "18" "2400/MNP" MS=2400 CON EC=Y
RESL: "19" "4800/MNP" MS=4800 CON EC=Y
RESL: "20" "7200/MNP" MS=7200 CON EC=Y
RESL: "21" "9600/MNP" MS=9600 CON EC=Y
RESL: "22" "12000/MNP" MS=12000 CON EC=Y
RESL: "23" "14400/MNP" MS=14400 CON EC=Y
RESL: "24" "300/MNP" MS=300 CON EC=Y DC=Y
RESL: "25" "1200/MNP" MS=1200 CON EC=Y DC=Y
RESL: "26" "2400/MNP" MS=2400 CON EC=Y DC=Y
RESL: "27" "4800/MNP" MS=4800 CON EC=Y DC=Y
RESL: "28" "7200/MNP" MS=7200 CON EC=Y DC=Y
RESL: "29" "9600/MNP" MS=9600 CON EC=Y DC=Y
RESL: "30" "12000/MNP" MS=12000 CON EC=Y DC=Y
RESL: "31" "14400/MNP" MS=14400 CON EC=Y DC=Y
RESL: "32" "300/V42" MS=300 CON EC=Y
RESL: "33" "1200/V42" MS=1200 CON EC=Y
RESL: "34" "2400/V42" MS=2400 CON EC=Y
RESL: "35" "4800/V42" MS=4800 CON EC=Y
RESL: "36" "7200/V42" MS=7200 CON EC=Y
RESL: "37" "9600/V42" MS=9600 CON EC=Y
RESL: "38" "12000/V42" MS=12000 CON EC=Y
RESL: "39" "14400/V42" MS=14400 CON EC=Y
RESL: "40" "300/V42BIS" MS=300 CON EC=Y DC=Y
RESL: "41" "1200/V42BIS" MS=1200 CON EC=Y DC=Y
RESL: "42" "2400/V42BIS" MS=2400 CON EC=Y DC=Y
RESL: "43" "4800/V42BIS" MS=4800 CON EC=Y DC=Y
RESL: "44" "7200/V42BIS" MS=7200 CON EC=Y DC=Y
RESL: "45" "9600/V42BIS" MS=9600 CON EC=Y DC=Y
RESL: "46" "12000/V42BIS" MS=12000 CON EC=Y DC=Y
RESL: "47" "14400/V42BIS" MS=14400 CON EC=Y DC=Y
##############################################################################
#
# "GVC 14.4 V.32bis/V.42bis/MNP5"
#
# Works with GVC external modem, and TurboModemPlus from PC Logic.
#
#
FILE: "GVC144-1"
NAME: "GVC 144000 V.42bis/MNP5 (extended)"
INIT: "AT&F2S0=0S2=1E0M0H0\\G1{"
ANSR: "ATA{"
PICK: "ATM0H1{"
HANG: "ATH0{"
DIAL: "~~ATH0DT"
SEPR: "/"
DEFL: MS=14400 CS=38400 EC=N DC=N AS=N FC=Y
RESL: "OK" "Normal" NORM
RESL: "RING" "Ring" RING
RESL: "NO CARRIER" "No Carrier" DIS
RESL: "ERROR" "Error" ERR
RESL: "NO DIAL TONE" "No Dial Tone" NDT
RESL: "NO DIALTONE" "No Dial Tone" NDT
RESL: "BUSY" "Busy" DIS
RESL: "NO ANSWER" "No Answer" DIS
RESL: "CONNECT" "300" MS=300 CON
RESL: "CONNECT 1200" "1200" MS=1200 CON
RESL: "CONNECT 2400" "2400" MS=2400 CON
RESL: "CONNECT 4800" "4800" MS=4800 CON
RESL: "CONNECT 7200" "7200" MS=7200 CON
RESL: "CONNECT 9600" "9600" MS=9600 CON
RESL: "CONNECT 12000" "12000" MS=12000 CON
RESL: "CONNECT 14400" "14400" MS=14400 CON
RESL: "MNP" '/MNP' EC=Y
RESL: "V42" '/V.42' EC=Y
RESL: "MNP COMPRESSED" '/MNP5' EC=Y DC=Y
RESL: "V42BIS" '/V.42bis' EC=Y DC=Y