home *** CD-ROM | disk | FTP | other *** search
/ High Voltage Shareware / high1.zip / high1 / DIR31 / WNCODE22.ZIP / README.TXT < prev    next >
Text File  |  1994-01-03  |  7KB  |  153 lines

  1. Wincode: a uucoder for Windows     (C) Snappy_Inc. (1993,1994)
  2. --------------------------------------------------------------
  3. written by George H. Silva
  4.  
  5. ***PLEASE DISTRIBUTE FREELY WITH ALL FILES INTACT***
  6.  
  7.  
  8. Files:    WINCODE.EXE    the main executable program
  9.           WINCODE.HLP    the HELP file
  10.           WINSORT.EXE    a companion file-sort utility
  11.           INSTALL.EXE    the Install/Upgrade program
  12.           INSTALL.INI    INSTALL information file
  13.           SUM.EXE        a BONUS "sum -r/size" DOS utility
  14.           README.TXT     this file
  15.  
  16.  
  17. About Wincode:
  18.  
  19. Wincode is a Windows 3.1 program which converts 7-bit ASCII (Text) files
  20. to 8-bit BINARY (EXE, COM, GIF, etc.) files (and vice versa) through a
  21. process known as uucoding. This ASCII/BINARY conversion allows you to send
  22. and receive binary files via e-mail or any other ascii-based communications
  23. system. It provides a quick and easy way to distribute programs to people
  24. all over the world (it takes a few minutes, on average, for e-mail to reach
  25. across the world). UUcoding is also a common practice on many Internet
  26. NewsGroups in which users wish to exchange binary data. If you spend any
  27. time on the Internet, you should own a UUcoder. If you use Windows, then
  28. Wincode is for you.
  29.  
  30. I originally wrote this program for my own needs and released it to
  31. the public as FREEWARE. I did not expect such a positive response to this
  32. small utility but have since been encouraged to upgrade and support it.
  33. However, I want to make a distinction here: this program is FREEWARE,
  34. it is NOT Public Domain. I still retain the Copyright to the source code and
  35. to the use and distribution of the program. See the HELP file for further 
  36. copyright and distribution info. I hope others find this program as 
  37. useful as I do and if so, drop me a line at the address(es) in the 
  38. HELP file.
  39.  
  40. Wincode is 100% compatible with all standard UUcoders. I have tried to
  41. incorporate as many extra features as possible to make the uucoding
  42. process painless. The average user may not need/use all of Wincode's
  43. features, but hey, they are Free!`
  44.  
  45.  
  46. Wincode Features (brief):
  47.  
  48.           - Full featured Windows 3.1 program
  49.           - Drag and Drop support! (use for batch en/de-coding)
  50.           - SMART decoding (see HELP file for more details)
  51.           - Fully configurable...I'm not joking!
  52.           - EMBL UUcode compatible.
  53.           - Supports UU, XX or User defined En/De-coding
  54.           - Includes INSTALL program for upgrades and checking
  55.             file integrity (virus free)
  56.           - Integrated file-sorting companion program (separate
  57.             executable for easier upgrading) which handles MANY types
  58.             of file header formats.
  59.           - It's ALL FREE...
  60.  
  61.  
  62. Requirements:
  63.  
  64.          - IBM compatible running DOS 3.3 or higher
  65.          - 286 or higher processor with at least 2MB memory
  66.          - Windows 3.1 running in standard or enhanced mode
  67.          - About 370K of disk space 
  68.  
  69.  
  70. Installing/Running Wincode:
  71.  
  72. If you have not already done so, expand the ZIP archive into a 
  73. temporary directory (I'd suggest a floppy-disk). Start Windows, 
  74. select FILE|RUN from Program Manager or File Manager and type in the 
  75. full path of the INSTALL.EXE program (run it). The INSTALL program
  76. will copy all the files to a directory you specify (overwriting
  77. older files) and Upgrade your WINCODE.INI if you are running an older
  78. version of Wincode. Now, install WINCODE.EXE as an icon (see the 
  79. WINCODE.HLP file or your Windows manuals) or use Program/File Manager's 
  80. FILE|RUN option to run Wincode (type in the full path of WINCODE.EXE). 
  81. When you have Wincode running, chose HELP|CONTENTS and read the help 
  82. file for information on Using and Configuring Wincode. Have Fun...
  83.  
  84. ***IMPORTANT NOTE: ALL files (listed above) must be present in the same
  85. directory for Installer to function properly. You should INSTALL
  86. first, then move selected files to directories of your choice
  87. (i.e. delete the README.TXT, place SUM.EXE in your DOS directory, etc.).
  88. The install program performs checksum analysis on each file to
  89. ensure you have an original version. If you recieve a BAD Checksum
  90. message, you: a) have a corrupted file or; b) have a virus infected
  91. file. If you need any help, send info to the address(es) in the HELP
  92. file.
  93.  
  94. (I suggest reading the ENTIRE Help file since it *fully* explains all
  95. of Wincode's options)
  96.  
  97.  
  98. BONUS 'sum -r/size' Utility:
  99.  
  100. I have included a small DOS executable which will quickly calculate 
  101. UNIX 'sum -r/size' checksums. This program is useful for checking the
  102. integrity of files that have been transferred over communications lines
  103. that are questionable (or, to some extent, checking for virus infections).
  104. Wincode now supports both line and/or file Checksum checking while decoding
  105. and will insert Checksums (line and/or file) while encoding. This utlity is 
  106. provided as a stand-alone DOS program. For program usage, type 'SUM' (with 
  107. no parameters) at the DOS prompt.
  108.  
  109.  
  110. Availability:
  111.  
  112. Recent versions of Wincode (or other Snappy_Inc software) are always available
  113. at the following locations:
  114.  
  115.     - CompuServe (check the WinShare forum; keyword: Snappy, Wincode, etc.)
  116.  
  117.     - The Nebuolic Cheese BBS  [SysOp: Stephen Lau]
  118.       phone# (415) 949-1788 - located in the Los Altos, Ca. area (USA)
  119.       (this is an Official Snappy_Inc. Software Release Site for the West
  120.       coast; I'm the East coast release site - see below)
  121.  
  122.     - The Internet - OK, so this isn't *very* specific...but, if you have
  123.       access to the internet, ARCHIE for:
  124.             WNCODExx.ZIP
  125.       where "xx" is the version number, i.e. WNCODE22.ZIP for version 2.2 ...
  126.  
  127.  
  128. Other Snappy_Inc. Software:
  129.  
  130. I generally develop utility programs for Windows 3.1. I currently have a
  131. handful of programs that I'm working on (some finished; most are in the works)
  132. which I will release as FREEWARE. These include a Windows Program Uninstaller
  133. and a Program Launcher. I welcome all ideas for future projects.
  134.  
  135.  
  136. Mailing List:
  137.  
  138. I have been trying to maintain a mailing list of all users who have
  139. offered advice, bug reports or helped in BETA testing. Being on this
  140. list entitles you to FREE upgrades (personally e-mailed pre-releases) 
  141. and support. (in other words, you don't have to download Wincode from
  142. the Internet or an Online Service/BBS). For more information see the
  143. HELP file.
  144.  
  145.  
  146. George.---
  147.  
  148.  
  149. - portions of this program copyright (c) 1991,1993 Borland
  150. - Windows is a trademark of Microsoft Corporation
  151. - GIF is a service mark of CompuServe Incorporated
  152. 
  153.