home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR24
/
LMOS2X.ZIP
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-06-30
|
5KB
|
116 lines
********************************************************************
*********** BETA *********** BETA *********** BETA ***********
********************************************************************
**********************************************
Welcome to Microsoft LAN Manager's
OS/2 2.x Redirector and Workplace Shell Beta
**********************************************
This readme provides information on installing the Microsoft
LAN Manager BETA redirector and workplace shell support for
OS/2 2.0 and OS/2 2.1 workstations, using LAN Manager 2.2 disks.
====================================================================
A. Before you begin
====================================================================
These are the files associated with this beta:
This file does/is this
--------------------------------------------------------------------
1. SETUP.EXE updated to recognize OS/2 2.1 systems
2. SETUP.INF tells Setup where to copy all files
3. NETWKSTA.SYS new redirector for OS/2 2.0 and OS/2 2.1
4. NETWKSTA.SY$ NETWKSTA.SYS compressed
5. LMWORKER.DLL provides Workplace Shell support
6. LMWORKER.DL$ LMWORKER.DLL compressed
7. LMDAEMON.EXE provides Workplace Shell support
8. LMDAEMON.EX$ LMDAEMON.EXE compressed
9. BUGTEMPL.TXT allows you to file bugs, report problems
10. README.TXT (this file)
====================================================================
B. Safety first
====================================================================
Now, save away your older versions of SETUP.EXE and NETWKSTA.SYS,
either installed on your hard disk, or on your LAN Manager 2.2 disks,
by copying them into a temp directory.
Next, copy the new files onto your LAN Manager 2.2 installation
disks. This will allow you to have the new files safe for future
installs or reinstalls.
Copy this file into this dir of this disk
--------------------------------------------------------------------
1. SETUP.EXE \ LAN MANAGER OS/2 SETUP
2. SETUP.INF \ LAN MANAGER OS/2 SETUP
3. NETWKSTA.SY$ \WKSTA20 LAN MANAGER OS/2 WORKSTATION
4. LMWORKER.DL$ \NETLIB LAN MANAGER OS/2 WORKSTATION
5. LMDAEMON.EX$ \NETPROG LAN MANAGER OS/2 WORKSTATION
====================================================================
C. If you are installing LAN Manager 2.2 from disks,
onto your OS/2 2.x workstation
====================================================================
1. install LAN Manager 2.2 as described in the Installation Guide.
2. to enable workplace shell support, edit CONFIG.SYS to add
the following line after "IFS=<lanroot>\NETWKSTA.SYS",
"RUN=<lanroot>\NETPROG\LMDAEMON.EXE". So, if your lanroot is
C:\LANMAN, the lines in CONFIG.SYS should look like this:
IFS=C:\LANMAN\NETWKSTA.SYS
RUN=C:\LANMAN\NETPROG\LMDAEMON.EXE
When the system comes up, a new folder, labeled "Networks" will
appear on the desktop. The help provided with OS/2 will instruct
you on making use of the Workplace Network Shell.
3. reboot as required in the installation process.
====================================================================
D. If LAN Manager 2.2 is already installed on your
OS/2 2.x workstation
====================================================================
1. copy SETUP.EXE into your lanroot, typically your \LANMAN directory.
2. copy NETWKSTA.SYS into your \LANMAN\NETPROG directory.
If you choose not to install WorkPlace Shell support, skip to step 6.
3. copy LMDAEMON.EXE into your \LANMAN\NETPROG directory.
4. copy LMWORKER.DLL into your \LANMAN\NETLIB directory.
5. to enable workplace shell support, edit CONFIG.SYS to add the
following line after "IFS=C:\LANMAN\NETWKSTA.SYS",
"RUN=C:\LANMAN\NETPROG\LMDAEMON.EXE". The lines in CONFIG.SYS
should look like this:
IFS=C:\LANMAN\NETWKSTA.SYS
RUN=C:\LANMAN\NETPROG\LMDAEMON.EXE
When the system comes up, a new folder, labeled "Networks" will
appear on the desktop. The help provided with OS/2 will instruct
you on making use of the Workplace Network Shell.
6. reboot.
====================================================================
E. Post installation comments, questions, problems
====================================================================
This is a beta, so there is no official support associated with it.
If you have questions or problems, please contact y-tad@microsoft.com.
Due to the large number of requests we receive, please be patient
regarding response to your query (assuming you have requested a
response in your bug report).
********************************************************************
*********** BETA *********** BETA *********** BETA ***********
********************************************************************