home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR24
/
K542X_D4.ZIP
/
CLINST20.TXT
< prev
next >
Wrap
Text File
|
1993-10-15
|
3KB
|
72 lines
INSTALLATION GUIDE FOR OS/2 2.0 16 COLORS NON-BLITTER DRIVER AND
32-Bit 256 COLORS BLITTER DRIVER FOR CIRRUS LOGIC'S GD542X CHIPS
-----------------------------------------------------------------
Programs you need for Installation.
_____________________________________
Clmode.exe or Video Adapter Utility program to select monitor type.
256 Color Blitter Drivers can only be used with the OS/2 2.0
Corrective Service Pack which is an upgrade that can be purchased
from IBM.
Installing the 16 colors non-blitter driver:
--------------------------------------------
1. Edit OS/2's config.sys file with the following settings.
ADD>
search for the LIBPATH statement and add "C:\OS2\DLL\CLDSP" to
the beginning of the LIBPATH statement.
For example: LIBPATH=C:\OS2\DLL\CLDSP; .; ........
set video_devices=vio_SVGA
set vio_SVGA=device(bvhvga,bvhsvga)
device=%1:\os2\mdos\vsvga.sys
and remark (REM) the following statements:
REM set video_devices=vio_vga
REM set vio_vga=device(bvhvga)
REM device=%1:\os2\mdos\vvga.sys
2. Bring up a DOS full screen session, run Clmode.exe utility that came in
your video adapter Utilities Disk to set monitor type,
then insert Cirrus Logic's driver diskette in drive A or B,
type A:SVGA.EXE ON or B:SVGA.EXE ON to create a svgadata.pmi file.
Copy your svgadata.pmi file to your \OS2 subdirectory.
3. shutdown the system to boot up from the OS/2 2.0 Installation
Diskette, then ESC out of Diskette One to run cli1620.cmd.
Installing the 256 colors blitter driver:
-----------------------------------------
256 Color Blitter Drivers can only be used with the OS/2 2.0
Corrective Service Pack which is an upgrade that can be purchased
from IBM.
1. Edit OS/2's config.sys file with the following settings
add
set video_devices=vio_SVGA
set vio_SVGA=device(bvhvga,bvhsvga)
device=%1:\os2\mdos\vsvga.sys
and remark (REM) the following statements:
REM set video_devices=vio_vga
REM set vio_vga=device(bvhvga)
REM device=%1:\os2\mdos\vvga.sys
2. Bring up a DOS full screen session, run Clmode.exe utility that came in
your video adapter Utilities Disk to set monitor type,
then insert Cirrus Logic's driver diskette in drive A or B,
type A:SVGA.EXE ON or B:SVGA.EXE ON to create a svgadata.pmi file.
Copy your svgadata.pmi file to your \OS2 subdirectory.
3. Shutdown the system to boot up from the OS/2 2.0 Installation
Diskette, then ESC out of Diskette One to run cli25620.cmd
Note:
When running Win-OS2 in Full Screen, Open Settings for Win-OS2 Full Screen and
go to Session. Under Dos Settings go to Video_Switch_Notification and switch
the default setting from OFF to ON. This setting must be changed so that when
running Full Screen Win-OS2 the Virtual Device Driver (VSVGA.SYS) functions
properly when switching between OS/2 Presentation Manager and Windows
Program Manager.