home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR24
/
CRLABS.ZIP
/
CLIOS2CD.EXE
/
README.NOW
next >
Wrap
Text File
|
1993-01-28
|
7KB
|
155 lines
OS/2 Driver for Sound Blaster Pro Panasonic CD Drive
Beta Version 1.13
Special Note for Version 1.13
This version should fix most hung-up upon boot-time error. For ver 2.1
users, you may try putting DEVICE=SBPCD2.SYS as the first line in the
CONFIG.SYS file. If IFS=HPFS.IFS is the first line, then put the DEVICE
line as the 2nd line.
Notes on IBM OS/2 CD-ROM Device Driver
Summary
This note describes how to use the device driver. Feed back on any problem
from users is welcome. Please see detail later for reporting bugs.
IMPORTANT: You need to have the separate Multimedia Presentation Manager
(MMPM/2) package installed for the CD-ROM drive to work
properly. Please check with your IBM dealer for the item.
The version of OS/2 after 2.0 will include MMPM/2 as part of
the system package.
What do you get and how to install?
First remove the following line from the CONFIG.SYS file.
DEVICE=C:\OS2\CDROM.SYS
You are given a copy of device driver file, SBPCD2.SYS. This is a beta
release version 1.0. Users should include the following line into the
CONFIG.SYS file.
DEVICE=C:\DRV\SBPCD2.SYS /P:nnn
Assuming the driver is located in the directory C:\DRV, the /P parameter is
for the I/O port address setting where nnn specified the address number in
hexadecimal. The valid options are 220, 240, 260 and 280 with default
setting is set to 220.
Note that the CD-ROM device driver that come with OS/2 packet will not work
together with SBPCD2.SYS.
What is needed with the device driver?
You need a Sound Blaster Pro card and a Matsushita CD-ROM drive, model CR-
521-CAC. Both the internal and the external drives work with this device
driver. If you have the earlier model of CD-ROM drive, the audio channel
control function might not work very well. This problem will be fixed in
the later version of device driver. Note that Matsushita is Panasonic, and
vice verse.
You will also need two drivers, VCDROM.SYS and CDFS.IFS, that come together
in the OS/2 packet. The follow two lines should be included in the
CONFIG.SYS file.
IFS=C:\OS2\CDFS.IFS /Q
DEVICE=C:\OS2\MDOS\VCDROM.SYS
Assuming the CDFS.IFS is found in the directory C:\OS2 and the VCDROM.SYS
is found in the directory C:\OS2\MDOS. For more information about these two
drivers, please refer to OS/2 manual.
IMPORTANT:
This driver is provided "AS IS". Your only revenue to get bugs fixed is to
complete the following form and either MAIL or FAX it to us. Any other
methods of communciation is not applicable.
Bug Report:
If you encounter any bug, please complete the following form and print
it out, and either mail or fax it to us.
,-----------------------------------------------------------------------------.
| |
| OS/2 CD-ROM Driver Beta Report for Sound Blaster Pro Panasonic CD Drive |
| |
|-----------------------------------------------------------------------------|
| NAME: | DATE: |
|-----------------------------------------------------------------------------|
| SYSTEM INFORMATION |
|-----------------------------------------------------------------------------|
| BRAND/MODEL OF COMPUTER: BUS: |
|-----------------------------------------------------------------------------|
| CPU: | VIDEO CARD: | PARALLEL: |
| SPEED: | BIOS VER: | SERIAL: |
| BIOS: | VIDEO CHIP: | EMBEDDED? |
| CHIPSET: | VIDEO RAM: | Motherboard? |
| RAM: | MAX COLORS: | |
|-----------------------------------------------------------------------------|
| HD MFG: HD MODEL: HD SIZE: |
| CONTROLLER MFG: CONTROLLER MODEL: |
|-----------------------------------------------------------------------------|
| MOUSE: | OTHER ADD-ON HARDWARE/SOFTWARE: |
| TYPE: | |
| DOS VER: | |
| MEM MGR: | |
|-----------------------------------------------------------------------------|
| PROBLEM: |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
`-----------------------------------------------------------------------------'
Mail to: OS/2 Development Group
Creative Labs, Inc
1901 McCarthy Blvd
Milpitas, CA 95131
Fax#: 1-408-428-6655
Attention OS/2 Development Group
MOST IMPORTANT:
Please do NOT contact the Creative Tech Support regarding this driver, and
they are not equipped to handle beta drivers. Direct your problems to the
OS/2 Development Group using the above form. We do not have the manpower
to answer any fax or mail, but will attempt to varify and correct any bugs
we received via the above form.
Thank you for your cooperation.