home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR15
/
SWT311A.ZIP
/
MANUAL.TXT
< prev
next >
Wrap
Text File
|
1993-11-05
|
101KB
|
3,087 lines
**********************************************************************
* *
* Shareware Tracker - Version 3.11 *
* Copyright (c) 1993 by BlueCollar Software *
* *
* Published exclusively by: *
* RMH Computer Services *
* PO Box 657 *
* Beech Grove IN 46107-0657 *
* (317) 782-9903 *
* *
**********************************************************************
_______
____|__ | (R)
--| | |-------------------
| ____|__ | Association of
| | |_| Shareware
|__| o | Professionals
-----| | |---------------------
|___|___| MEMBER
RMH Computer Services is a member of the Association of Shareware
Professionals (ASP). ASP wants to make sure that the shareware
principle works for you. If you are unable to resolve a
shareware-related problem with an ASP member by contacting the member
directly, ASP may be able to help. The ASP Ombudsman can help you
resolve a dispute or problem with an ASP member, but does not provide
technical support for members' products. Please write to the ASP
Ombudsman at 545 Grover Road, Muskegon, MI 49442-9427 USA, FAX
616-788-2765 or send a CompuServe message via CompuServe Mail to ASP
Ombudsman 70007,3536.
WARRANTY
--------
Neither BlueCollar Software nor RMH Computer Services make warranty of
any kind, express or implied, including without limitation, any
warranties of merchantability and/or fitness for a particular purpose.
Neither BlueCollar Software nor RMH Computer Services shall be liable
for any damages, whether direct, indirect, special or consequential
arising from a failure of this program to operate in the manner
desired by the user. Neither BlueCollar Software nor RMH Computer
Services shall be liable for any damage to data or property which may
be caused directly or indirectly by use of the program.
IN NO EVENT WILL BLUECOLLAR SOFTWARE OR RMH COMPUTER SERVICES BE
LIABLE FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS OR
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR
INABILITY TO USE THE PROGRAM, OR FOR ANY CLAIM BY ANY OTHER PARTY.
TABLE OF CONTENTS
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Registration Benefits . . . . . . . . . . . . . . . . . . . 1
System Requirements . . . . . . . . . . . . . . . . . . . 2
RECORD KEEPING . . . . . . . . . . . . . . . . . . . . . . 2
Registered Users . . . . . . . . . . . . . . . . . . . . 3
Edit User Information . . . . . . . . . . . . . . . . 5
Income From User . . . . . . . . . . . . . . . . . . 6
Income From Reg Service . . . . . . . . . . . . . . . 7
Additional Income . . . . . . . . . . . . . . . . . . . . 8
Registration Services . . . . . . . . . . . . . . . . 8
Royalty Payments . . . . . . . . . . . . . . . . . . 9
Upgrades Sales . . . . . . . . . . . . . . . . . . . 10
Upgrade Income . . . . . . . . . . . . . . . . . . . 11
Tech Support Income . . . . . . . . . . . . . . . . . 11
Tech Support Payment . . . . . . . . . . . . . . . . 12
Subscription Income . . . . . . . . . . . . . . . . . 12
Subscription Payments . . . . . . . . . . . . . . . . 12
Source Code Income . . . . . . . . . . . . . . . . . 13
Other Income . . . . . . . . . . . . . . . . . . . . 13
Submissions . . . . . . . . . . . . . . . . . . . . . . . 14
Expenses . . . . . . . . . . . . . . . . . . . . . . . . 15
Author Database . . . . . . . . . . . . . . . . . . . . . 16
Dealer Database . . . . . . . . . . . . . . . . . . . . . 18
Business Status . . . . . . . . . . . . . . . . . . . . . 21
Registration Info . . . . . . . . . . . . . . . . . . . . 23
To Exit . . . . . . . . . . . . . . . . . . . . . . . . . 24
LETTERS, LABELS, & REPORTS . . . . . . . . . . . . . . . . 26
Printer Setup Utility . . . . . . . . . . . . . . . . . . 26
User-Defined Reports . . . . . . . . . . . . . . . . . . 29
Letters . . . . . . . . . . . . . . . . . . . . . . . . . 30
To Registered Users . . . . . . . . . . . . . . . . . 36
With Submissions . . . . . . . . . . . . . . . . . . 36
To Authors . . . . . . . . . . . . . . . . . . . . . 36
To Vendors & BBSs . . . . . . . . . . . . . . . . . . 37
Labels . . . . . . . . . . . . . . . . . . . . . . . . . 37
To Users . . . . . . . . . . . . . . . . . . . . . . 37
For Submissions . . . . . . . . . . . . . . . . . . . 37
To Vendors . . . . . . . . . . . . . . . . . . . . . 37
To Authors . . . . . . . . . . . . . . . . . . . . . 37
Other Label Printing . . . . . . . . . . . . . . . . 37
Reports . . . . . . . . . . . . . . . . . . . . . . . . . 38
Income . . . . . . . . . . . . . . . . . . . . . . . 38
Registered Users . . . . . . . . . . . . . . . . . . 39
Registration Service . . . . . . . . . . . . . . . . 39
Royalties . . . . . . . . . . . . . . . . . . . . . . 39
Upgrade Sales . . . . . . . . . . . . . . . . . . . . 39
Technical Support Sales . . . . . . . . . . . . . . . 39
Subscription Sales . . . . . . . . . . . . . . . . . 40
Source Code Sales . . . . . . . . . . . . . . . . . . 40
Other Income . . . . . . . . . . . . . . . . . . . . 40
Expenses . . . . . . . . . . . . . . . . . . . . . . 40
Data . . . . . . . . . . . . . . . . . . . . . . . . 40
Registered Users . . . . . . . . . . . . . . . . . . 41
Submissions . . . . . . . . . . . . . . . . . . . . . 41
Dealers . . . . . . . . . . . . . . . . . . . . . . . 41
Authors . . . . . . . . . . . . . . . . . . . . . . . 41
UTILITIES . . . . . . . . . . . . . . . . . . . . . . . . . 41
Set Reg Number . . . . . . . . . . . . . . . . . . . . 42
Sort Files . . . . . . . . . . . . . . . . . . . . . . 42
Color Selection . . . . . . . . . . . . . . . . . . . . 42
Print User's Manual . . . . . . . . . . . . . . . . . . 44
Registration Form . . . . . . . . . . . . . . . . . . . 44
HOT KEY SUMMARY . . . . . . . . . . . . . . . . . . . . . . 44
F1 = Help . . . . . . . . . . . . . . . . . . . . . . 44
F2 = Help Topics . . . . . . . . . . . . . . . . . . . 44
F3 = Phone Numbers . . . . . . . . . . . . . . . . . . 44
F4 = Appointment Calendar . . . . . . . . . . . . . . 46
F5 = Calculator . . . . . . . . . . . . . . . . . . . 49
F10 = Indexing . . . . . . . . . . . . . . . . . . . . 50
ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . 50
PRODUCT SUPPORT . . . . . . . . . . . . . . . . . . . . . . 51
Shareware Tracker Ver 3.11 Page 1
---------------------------------------------------------------------
Welcome to Shareware Tracker
This program will track your users, submissions, expenses, and income
from technical support, subscriptions, and upgrades. It will track
money received from Registration Services and Royalty payments.
SWT will mail-merge letters and labels to users, dealers, and other
authors. Print or view pre-defined reports, or let you define and
print your own reports.
An appointment calendar will list all your appointments. Another
database will maintain suppliers, contacts, or whoever else you might
need.
A calculator is a hot-key away.
Enjoy!
Registration Benefits
---------------------
The shareware copy of Shareware Tracker that you have is fully-
functional. However, upon registering your copy, you will receive:
1) A disk containing the most current version of the program.
2) A lifetime license to use the product.
3) Registered copies of Shareware Tracker will display the owners
name on the main program screen.
4) Registered users receive a utility program which updates the
author and vendor databases from data released monthly by ASP.
5) Support via the phone, by fax, mail, CompuServe, and various
other message networks.
6) A 30 day money-back guarantee.
7) Special discounts and online credits for CompuServe.
8) Special discounts on magazines, newsletter, and products from
Public (software) Libraries.
9) Special discounts on Shareware Magazine, one of the industry's
foremost publications, by Mike Callahan (alias Dr. FileFinder)
And apart from all that, the knowledge that you are helping to support
the Shareware concept - a distribution system that brings you quality
software at realistic prices.
Shareware Tracker Ver 3.11 Page 2
---------------------------------------------------------------------
=================================================
SYSTEM REQUIREMENTS
=================================================
Shareware Tracker will run on IBM-compatible computer systems, and
requires a DOS version of 3.3 or greater. It is required to be
installed on a hard disk drive, and will need approximately 2
Megabytes of free space to install.
The program requires an environment variable of SET CLIPPER=F95 to be
set prior to running. This can be set in the AUTOEXEC.BAT file, or
from the command line prior to running the program.
The program requires CONFIG.SYS settings of at least FILES=90 and
BUFFERS=20.
COLOR/MONOCHROME MONITORS
-------------------------
This program will check to see if you have a color video card
installed in your computer. If it finds one, it will automatically set
the screen display to the color settings. If it finds a monochrome
video card, it will automatically set the screen display to the
monochrome settings. If you are using a color card with a monochrome
monitor, the program may not display properly. However, you can go
back to the DOS prompt and restart the program using the command
SWT M
to restart the program in forced monochrome mode.
=================================================
RECORD KEEPING
=================================================
This section allows you to keep track of the customers who register
your programs/products. The following commands are somewhat universal
throughout this section:
ADDING A RECORD
---------------
[INS]:..Use the Insert key when you want to add a record to your
files. This will open a screen to enter your data.
EDITING A RECORD
----------------
[ENTER]:..First highlight the record you wand to edit and press
[ENTER]. The screen will look different than when you add
a record. An '==>' is visible at the first field. Using
the arrow keys move to the field you want to edit and
Shareware Tracker Ver 3.11 Page 3
---------------------------------------------------------------------
press [ENTER]. This will allow you to edit the field.
Press [ENTER] again and the '==>' will re-appear. Edit all
the fields you need and press [ESC] to accept, re-try, or
cancel you edits.
DELETING A RECORD
-----------------
[DEL]:..Highlight the record you want to delete and press the [DEL]
key.
CHANGE INDEX
------------
[F10]:..Press the F10 key to see a list of the various indexes in
each data base. Select the type of sorting you want, and
press [ENTER].
------------------
REGISTERED USERS
------------------
Registration Number
-------------------
The registration number will be automatically incremented each
time you enter a new user. If the displayed number is satis-
factory, just press [ENTER].
You can type in another registration number if you wish, but if
you want to increment from the new number, you must go to the
"Set Reg Number" in the "Utilities" menu and set the new number
there.
The program will not allow two identical numbers in the
database.
Date Of Registration
--------------------
Type in the date this registration was received or the
registered version was sent to the user, whichever you prefer.
NOTE: On leaving this field, the program will automatically open
the "Registered User Information" window (see below).
Program Name & Version
----------------------
Type in the name and version of the program the user is
registering, if it is not already in your program file.
If it is the first time anyone has registered a new program or
version, a box will appear telling you the program is not in
Shareware Tracker Ver 3.11 Page 4
---------------------------------------------------------------------
the file, a box will appear telling you this. and ask you if you
want to add it.
If you have not made a typo, select <Yes>, and press [ENTER].
Another box will appear to allow you to check your typing, if it
is correct, press [ENTER], and the program will be added to your
file.
If the program is already in the file, press [ENTER] in the
blank 'Name and Version" field. A listing of all your programs
will appear. Use the arrow keys to select the program and
version this user is registering. "Shareware Tracker" will pop
it into the field. It'll save you a little typing and keep your
information consistent in the other modules tied to this one.
Registrations from
------------------
Select where this registration's income came. If it came from
the user, it will update the 'profits' and 'registration info'
files immediately. But if it came from a registration service,
this income will not by updated until you receive your payment
from the service and enter it into the 'Other Income' database.
Disk Size
---------
Use the down arrow key to select the disk size this user
requested, press [ENTER].
Version Sent to User
--------------------
In this field, you should enter the version number that you will
be sending to the user, and not the version that the user has
registered. For example, the user might have registered version
2.1, but you will send them the newer version 2.2. This field
can be very useful when sending out upgrade notices, because you
will know that this user now has version 2.2 already.
Received From
-------------
Enter the dealer, BBS, or from whom this user obtained his/her
copy of the shareware version of your program.
Shipped Date
------------
Enter the date you sent the registered version to this user. If
you send this user an upgrade and enter that information in the
Shareware Tracker Ver 3.11 Page 5
---------------------------------------------------------------------
'Upgrade Sales' option, this field will be automatically updated
to show the date the upgrade was shipped.
How Shipped
-----------
Enter the way this program was shipped to the user, (Mail, UPS,
etc.) if applicable.
-----------------------------
Registered User Information
-----------------------------
This section allows you to input specific information regarding the
customer.
Last Name/First Name/Middle Initial
-----------------------------------
Type in the users last name, first name, and middle initial.
Company
-------
Type in the name of the company, if applicable.
Street
------
Type in the street address.
City
----
Type in the city.
State
-----
Type in the name of the State, or Province, or whatever.
Zip Code
--------
Type in the Zip or Postal Code.
Country
-------
Enter the country. If it is not the country where you are
living.
Shareware Tracker Ver 3.11 Page 6
---------------------------------------------------------------------
Home Phone
----------
Type in the home phone number of the registered user.
FAX
---
Enter the FAX number for this user, if applicable.
Work Phone
----------
Type in the work phone number of the registered user.
Extension
---------
Type in the extension of the work phone, if applicable.
EMail Address
-------------
Enter the EMail address of this user, if applicable.
Type of Credit Card
-------------------
Enter the type of Credit Card of this registration, if
applicable.
Credit Card Number
------------------
Enter the user's credit card number, if applicable.
Expiration Date
---------------
Enter the expiration date of the user's Credit Card.
------------------
Income From User
------------------
Number of Users
---------------
Enter the number of registrations for this order.
Shareware Tracker Ver 3.11 Page 7
---------------------------------------------------------------------
Registration Payment
--------------------
Type in the amount of registration fee paid by the user.
# of Site Licenses
------------------
Enter the number of site licenses for this registration.
Cost of Site License
--------------------
Enter the cost of EACH site license.
Shipping
--------
Enter the amount of shipping with this registration.
Tax
---
Enter the amount of the tax paid by this user, if any.
-------------------------
Income From Reg Service
-------------------------
Number of Users (RegServ)
-------------------------
Enter the number of registrations for this order.
Registration Payment (RegServ)
------------------------------
Type in the amount of registration fee paid by the user.
# of Site Licenses (RegServ)
----------------------------
Enter the number of site licenses for this registration.
Cost of Site License (RegServ)
------------------------------
Enter the cost of EACH site license.
Shipping (RegServ)
------------------
Enter the amount of shipping with this registration.
Shareware Tracker Ver 3.11 Page 8
---------------------------------------------------------------------
Tax (RegServ)
-------------
Enter the amount of the tax paid by this user, if any.
-------------------
ADDITIONAL INCOME
-------------------
This section allows you to keep track of additional income sources.
-----------------------
Registration Services
-----------------------
Selecting this menu option brings up a browse window. If the file is
empty, you will automatically be put into a screen for adding your
first record.
But let's start with the browse window. You only see the first couple
of fields when it comes up. By pressing the Arrow keys you can move to
the right, left, down, or up in order to see all the records and
fields in your databases. Page up, down, home, and end will also move
you through the window.
While in the Browse you can change indexing. Press F10 to see a pop-up
of the indexes available. Use the arrow keys to highlight the one you
want and press [ENTER]. You can use the arrow keys to move to the
field containing the index condition before or after you select the
new index.
Date Payment Received
---------------------
Enter the date you received this payment from the Registration
Service, or press [ENTER] to accept today's date.
Program Name & Version
----------------------
If this program is already in your 'Programs' database, press
[ENTER] while this field is blank. A list of your programs will
appear. Use the arrow keys to highlight the program you received
payment for and press the [ENTER] key. Your program will be
inserted into the 'Field' for this payment.
If this program doesn't exist in your programs database, or if
you typed it in differently, a box will appear asking you if you
want to add this to your program list.
Shareware Tracker Ver 3.11 Page 9
---------------------------------------------------------------------
Received From
-------------
Type in the name of the dealer, catalog, BBS, etc. where you
received this payment, if the dealer is not in your 'Dealer'
database. A box will appear asking you if you want to add it.
If this dealer is in your database, press [ENTER] at the blank
field, a browse screen will appear and you can 'search' for the
dealer. The [F10] key can be used to change the field you
search. When you locate the dealer, highlight it and press
[ENTER]. All the dealer's information will be inserted into this
database.
Registrations from Service
--------------------------
Type in the number of registrations for this month from this
service for this program.
Registration Serv. Income
-------------------------
This field will keep track of the registration service income
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
------------------
Royalty Payments
------------------
This option will allow you to maintain a database of all moneys
received from royalty payments. It will add the amount of payments to
the "Business Status" files and the "Registration Info" files.
Date Payment Received
---------------------
Enter the date you received this Royalty Payment, or press
[ENTER] to accept today's date.
Program Name & Version
----------------------
If this program is already in your 'Programs' database, press
[ENTER] while this field is blank. A list of your programs will
appear. Use the arrow keys to highlight the program you received
payment for and press the [ENTER] key. Your program will be
inserted into the 'Field' for this payment.
If this program doesn't exist in your programs database, or if
you typed it in differently, a box will appear asking you if you
Shareware Tracker Ver 3.11 Page 10
---------------------------------------------------------------------
want to add this to your program list.
Received From
-------------
Type in the name of the dealer, catalog, BBS, etc. where you
received this payment, if the dealer is not in your 'Dealer'
database. A box will appear asking you if you want to add it.
If this dealer is in your database, press [ENTER] at the blank
field, a browse screen will appear and you can 'search' for the
dealer. The [F10] key can be used to change the field you
search. When you locate the dealer, highlight it and press
[ENTER]. All the dealer's information will be inserted into this
database.
Royalties Sales
---------------
This field will keep track of the number of royalty sales you
have. It will be incremented from the "Additional Income" option
in "Record Keeping".
Royalty Income
--------------
This field will keep track of the royalty income you have. It
will be incremented from the "Additional Income" option in
"Record Keeping".
----------------
Upgrades Sales
----------------
This option will allow you to maintain a database of all moneys
received from upgrades. It will add the amount of payments to the
"Business Status" files and the "Registration Info" files.
Reg #
-----
If you know the registration number of the user, type it in
here. If you don't, press [ENTER] in the blank field. A browse
window will appear and you will be able to search and select the
correct registration. When it is highlighted, press [ENTER].
All the User's information will be added to this file.
Shareware Tracker Ver 3.11 Page 11
---------------------------------------------------------------------
Upgrade Income
----------------
This option will allow you to maintain a database of all moneys
received from upgrades. It will add the amount of payments to the
"Business Status" files and the "Registration Info" files.
Date Paid
---------
Enter the date of this payment.
Upgrade Sales
-------------
This field will keep track of the upgrade sales income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
Last Version
------------
Regardless of the version the user registered, enter the last
version that has been sent to this user. This field can be very
useful when sending out upgrade notices.
---------------------
Tech Support Income
---------------------
This option will allow you to maintain a database of all moneys
received for technical support. It will add the amount of payments
to the "Business Status" files and the "Registration Info" files.
Only the amount of the payment will be updated.
If Tech Support is only available for a limited time, that date of
expiration will be placed in your "Registered Users" database.
If payments are required for the user to maintain tech support
privileges, the expiration date will be replaced in the "Registered
Users" database each time a payment is made.
Reg #
-----
If you know the registration number of the user, type it in
here. If you don't, press [ENTER] in the blank field. A browse
window will appear and you will be able to search and select the
correct registration. When it is highlighted, press [ENTER].
All the User's information will be added to this file.
Shareware Tracker Ver 3.11 Page 12
---------------------------------------------------------------------
Tech Support Payment
----------------------
Date Paid
---------
Enter the date of this payment.
Tech Support Income
-------------------
This field will keep track of the technical support income you
have. It will be incremented into the "Additional Income" option
in "Record Keeping". If you do not charge for tech support, but
it does expire after a certain time, leave this field set at
"0.00" and type in the expiration date in the next field. This
will show in the "Users" database when support expires.
Tech Support Expires
--------------------
Enter the date technical support for this user expires. This
will show in the "Users" database after an entry is made here.
---------------------
Subscription Income
---------------------
This option will keep track of the subscription income you have. It
will be added into the "Additional Income" option in "Record Keeping".
And also the "Business Status" and "Program Info" databases.
Reg #
-----
If you know the registration number of the user, type it in
here. If you don't, press [ENTER] in the blank field. A browse
window will appear and you will be able to search and select the
correct registration. When it is highlighted, press [ENTER].
All the User's information will be added to this file.
Subscription Payments
-----------------------
Enter Subscription Payments.
Date Paid
---------
Enter the date of this payment.
Shareware Tracker Ver 3.11 Page 13
---------------------------------------------------------------------
Subscription Income
-------------------
This field will keep track of the subscription income you have.
It will be incremented into the "Additional Income" option in
"Record Keeping". This will show in the "Users" database when
this subscription expires.
Subscription Expires
--------------------
Enter the date the subscription for this user expires. This
will show in the "Users" database after an entry is made here.
--------------------
Source Code Income
--------------------
Use this option to keep track of the users you have purchased your
source code. The value of the sale will be added to the "Business
Status", "Users, and "Registration Info" databases.
Reg #
-----
If you know the registration number of the user, type it in
here. If you don't, press [ENTER] in the blank field. A browse
window will appear and you will be able to search and select the
correct registration. When it is highlighted, press [ENTER].
All the User's information will be added to this file.
Date Paid
---------
Type in the date of this sale.
Source Code Income
------------------
This field will keep track of the source code income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
--------------
Other Income
--------------
This option will allow you to maintain a database of all moneys
received from other income. It will add the amount of payments to the
"Business Status" files and the "Registration Info" files.
Shareware Tracker Ver 3.11 Page 14
---------------------------------------------------------------------
Other Income Date
-----------------
Type in the date this income was received.
Other Income
------------
This option will allow you to maintain a database of all moneys
received from other income. It will add the amount of payments
to the "Business Status" files and the "Registration Info"
files.
Notes
-----
Type in a brief description of why this income was received.
=============
Submissions
=============
Selecting this menu option brings up a browse window. If the file is
empty, you will automatically be put into a screen for adding your
first record.
But let's start with the browse window. You only see the first couple
of fields when it comes up. By pressing the Arrow keys you can move to
the right, left, down, or up in order to see all the records and
fields in your databases. Page up, down, home, and end will also move
you through the window.
While in the Browse you can change indexing. Press F10 to see a pop-up
of the indexes available. Use the arrow keys to highlight the one you
want and press [ENTER]. You can use the arrow keys to move to the
field containing the index condition before or after you select the
new index.
If you want to search for the name of the place you sent your
submission, change the index to "Sent To", and type in some or all of
it. Then press [ENTER]. If you only typed in a few letters of the name
('stu', for example), the program will seek the first "Sent To" that
starts with 'Stu'. The same hold true for all the indexes.
Program Name and Version
------------------------
If this program is already in your 'Programs' database, press
[ENTER] while this field is blank. A list of your programs will
appear. Use the arrow keys to highlight the program you are
sending to this dealer, BBS, etc. and press [ENTER]. Your
program will be inserted into the 'Field' for this submission.
Shareware Tracker Ver 3.11 Page 15
---------------------------------------------------------------------
If this program doesn't exist in your programs database, or if
you typed it in differently, a box will appear asking you if you
want to add this to your program list.
Sent to
-------
Type in the name of the dealer, catalog, BBS, etc. where you
sent the program, if this program is not in your 'Dealer'
database. A box will appear asking you if you want to add it.
If this dealer is in your database, press [ENTER] at the blank
field, a browse screen will appear and you can 'search' for the
dealer. The [F10] key can be used to change the field you
search. When you locate the dealer, highlight it and press
[ENTER]. All the dealer's information will be inserted into the
'Submissions' database.
Date Sent
---------
Type in the date you sent the program.
Accepted
--------
Use the arrow keys and select "Not yet","Yes!", or "No" to tell
whether the submission has been accepted by the dealer, BBS, or
whoever you sent it to.
Disk Lib Number
---------------
When you receive acceptance from a dealer, you sometimes get a
disk library number for future reference. Put that number in
this field.
==========
Expenses
==========
Enter your own expenses, not tied to author's commission.
Type Of Expense
---------------
Whenever you add a new type of expense (software, hardware,
postage, telephone, etc.) a box will appear telling you this is
not on file, and ask you if you want to add it. Highlighting yes
and pressing [ENTER] will add it to a list of expenses.
Shareware Tracker Ver 3.11 Page 16
---------------------------------------------------------------------
After a type of expense has been entered to this list, you can
insert it by pressing [ENTER] at the BLANK 'Type of Expense"
field. Your list will pop up and a selection can be made using
the arrow keys to highlight the correct entry, and then pressing
[ENTER] again.
Date Purchased
--------------
Type in the date the expense occurred.
Brand Name
----------
Type in the brand name of the expense, if applicable.
Description
-----------
Type in a brief description of the expense.
Where Purchased
---------------
Type in where you purchase the expense, or who got your money.
Cost
----
Type in how much you were charged or spent.
=================
Author Database
=================
Add\Edit\View\Delete Author Database.
ASP Member
----------
If this Author is a member of the Association of Shareware
Professionals, answer "Yes", if not "No".
It will be necessary to make sure that any authors not in the
ASP, be marked with "No". When updating the author database
with the latest ASPDAT.ZIP, the "Utility" will check for a "No".
If it finds one, it will leave this record alone. A "Yes" will
automatically be entered, by the "Utility" for all ASP dealers,
etc.
Shareware Tracker Ver 3.11 Page 17
---------------------------------------------------------------------
First Name
----------
Type in the first name of the author.
Last Name
---------
Type in the last name of the author.
Company
-------
Type in the name of the company.
Address
-------
Type in the street address.
Address 2
---------
Type in a second address, if applicable.
City
----
Type in the city.
State(only)
-----------
Type in the name of the State, or Province, or whatever.
Zip Code
--------
Type in the Zip Code.
Country
-------
Enter the country, If it is not the country where you are
living.
Phone
-----
Type in the phone number. There is no field in the Author
database provided by the ASP. This must be entered by the user,
if he knows the number.
Shareware Tracker Ver 3.11 Page 18
---------------------------------------------------------------------
CompuServe ID Number
--------------------
Enter the CIS PPN.
Date Joined
-----------
Enter the date his member joined the ASP.
=================
Dealer Database
=================
Add/Edit/Delete/View the dealer's database.
Add - Press [INS].
Edit or View - Highlight the record and press [ENTER].
Delete - Highlight the record and press [DEL].
ASP Member
----------
If this dealer, BBS, etc. is a member of the Association of
Shareware Professionals, answer "Yes", if not "No".
It will be necessary to make sure that any submissions made to
vendors not in the ASP, be marked with "No". When updating the
dealer database with the latest ASPDAT.ZIP, the "Utility" will
check for a "No". If it finds one, it will leave this record
alone. If it doesn't find a "No", you will lose this record in
the "Dealers" database ONLY. It will still be in your
submissions database. A "Yes" will automatically be entered, by
the "Utility" for all ASP dealers, etc.
Vendor Number
-------------
This field will be initialized when you update the ASPDAT.ZIP
file from ASPFORUM LIB 4. Use the provided utility to update
your database of dealers.
You can enter the information manually if you have it at hand,
but if this is not an ASP approved dealer, BBS, etc., leave this
field blank.
Date Joined ASP
---------------
This field will be initialized when you update the ASPDAT.ZIP
file from ASPFORUM LIB 4. Use the provided utility to update
your database of dealers.
Shareware Tracker Ver 3.11 Page 19
---------------------------------------------------------------------
You can enter the information manually if you have it at hand,
but if this is not an ASP approved dealer, BBS, etc., leave this
field blank.
Sent to
-------
Type in the name of the dealer, catalog, BBS, etc. where you
sent the program, if this program is not in your 'Dealer'
database.
Type
----
Type in a description (catalog, BBS, dealer, etc.) that best
suits where you sent your program.
Contact Name
------------
Type in the name of a person to contact, if applicable.
Address
-------
Type in the street address.
Address 2
---------
Enter a second line of the address, if applicable.
City
----
Type in the city.
State(only)
-----------
Type in the name of the State, or Province, or whatever.
Zip Code
--------
Type in the Zip or Postal Code.
Country
-------
Shareware Tracker Ver 3.11 Page 20
---------------------------------------------------------------------
First Phone
-----------
Type in a phone number.
Phone For1
----------
Type in what the number is for (Voice, FAX, BBS, etc).
Second Phone
------------
Type in a phone number.
Phone For2
----------
Type in what the number is for (Voice, FAX, BBS, etc).
Third Phone
-----------
Type in a phone number.
Phone For3
----------
Type in what the number is for (Voice, FAX, BBS, etc).
Rack Vendor?
------------
This field will be initialized when you update the ASPDAT.ZIP
file from ASPFORUM LIB 4. Use the provided utility to update
your database of dealers.
You can enter the information manually if you have it at hand,
but if this is not an ASP approved dealer, BBS, etc., leave this
field blank.
Royalties?
----------
This field will be initialized when you update the ASPDAT.ZIP
file from ASPFORUM LIB 4. Use the provided utility to update
your database of dealers.
You can enter the information manually if you have it at hand,
but if this is not an ASP approved dealer, BBS, etc., leave this
field blank.
Shareware Tracker Ver 3.11 Page 21
---------------------------------------------------------------------
CIS PPN
-------
This field will be initialized when you update the ASPDAT.ZIP
file from ASPFORUM LIB 4. Use the provided utility to update
your database of dealers.
You can enter the information manually if you have it at hand,
but if this is not an ASP approved dealer, BBS, etc., leave this
field blank.
=================
Business Status
=================
This will allow you to take a look and see how much money your making.
All the fields will be automatically updated from other modules. You
should only have to edit them in rare cases.
Number of Registrations
-----------------------
Sales
-----
Registration Serv. Income
-------------------------
This field will keep track of the registration service income
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Number of Site Licenses
-----------------------
Total of Site Licenses
----------------------
Shipping
--------
Tax
---
Shareware Tracker Ver 3.11 Page 22
---------------------------------------------------------------------
Other Income
------------
This option will allow you to maintain a database of all moneys
received from other income. It will add the amount of payments
to the "Business Status" files and the "Registration Info"
files.
Royalties Sales
---------------
This field will keep track of the number of royalty sales you
have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Royalty Income
--------------
This field will keep track of the royalty income you have. It
will be incremented from the "Additional Income" option in
"Record Keeping".
Upgrade # of Sales
------------------
This field will keep track of the number of upgrade sales you
have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Upgrade Sales
-------------
This field will keep track of the upgrade sales income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
Tech Support Sales
------------------
This field will keep track of the number of technical support
sales you have. It will be incremented from the "Additional
Income" option in "Record Keeping".
Tech Support Income
-------------------
This field will keep track of the technical support income you
have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Shareware Tracker Ver 3.11 Page 23
---------------------------------------------------------------------
Subscription Sales
------------------
This field will keep track of the number of Subscription sales
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Subscription Income
-------------------
This field will keep track of the subscription income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
Source Code Sales
-----------------
This field will keep track of the number of source code sales
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Source Code Income
------------------
This field will keep track of the source code income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
Expenses
--------
===================
Registration Info
===================
This keeps track of the your program names and versions.
Program Name & Version
----------------------
Enter the name and version of this program.
Number of Users
---------------
Enter the number of registrations for this order.
Total Sales for Order
---------------------
Shareware Tracker Ver 3.11 Page 24
---------------------------------------------------------------------
Registration Serv. Income
-------------------------
This field will keep track of the registration service income
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
# of Site Licenses
------------------
Enter the number of site licenses for this registration.
Total of Site Licenses
----------------------
Shipping
--------
Enter the amount of shipping with this registration.
Tax
---
This field will keep track of the tax the users paid. It will
be incremented from the "Other Income" option in "Record
Keeping".
Royalties Sales
---------------
This field will keep track of the number of royalty sales you
have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Royalty Income
--------------
This field will keep track of the royalty income you have. It
will be incremented from the "Additional Income" option in
"Record Keeping".
Upgrade # of Sales
------------------
This field will keep track of the number of upgrade sales you
have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Upgrade Sales
-------------
This field will keep track of the upgrade sales income you have.
Shareware Tracker Ver 3.11 Page 25
---------------------------------------------------------------------
It will be incremented from the "Additional Income" option in
"Record Keeping".
Tech Support Sales
------------------
This field will keep track of the number of technical support
sales you have. It will be incremented from the "Additional
Income" option in "Record Keeping".
Tech Support Income
-------------------
This field will keep track of the technical support income you
have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Subscription Sales
------------------
This field will keep track of the number of Subscription sales
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Subscription Income
-------------------
This field will keep track of the subscription income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
Source Code Sales
-----------------
This field will keep track of the number of source code sales
you have. It will be incremented from the "Additional Income"
option in "Record Keeping".
Source Code Income
------------------
This field will keep track of the source code income you have.
It will be incremented from the "Additional Income" option in
"Record Keeping".
=========
To Exit
=========
To exit the program, press [ESC]. No matter where you are in the
program, if you press [ESC], you will back out. When a 'box' appears
Shareware Tracker Ver 3.11 Page 26
---------------------------------------------------------------------
asking if you want to exit, use the up arrow key to select 'Yes' and
press [ENTER]
=================================================
Letters, Labels, & Reports
=================================================
This option will allow you to mail-merge letters and labels. View and
print reports. And create you own user-defined reports.
Highlight the option you prefer and press [F1] for more help.
-----------------------
Printer Setup Utility
-----------------------
The Printer Setup Utility will allow you to define your own printer
configurations for this application. NOTE that the configuration here
pertains to ONLY the User-Defined Reports Utility. Four standard
printer configurations have been provided for your convenience.
The Printer Setup Utility is to be used in conjunction with the
built-in Report Generator. This utility enables you to define an
unlimited number of printer configurations for each report.
When you are ready to use this utility, highlight Printer Setup, then
press [ENTER], or Press the letter [S]. Once selected, the 'List of
Printer Configurations' will appear.
This browse window will contain the four standard printer
configurations that are provided with this applications. To add a new
configuration, press [INS] from this browse window.
The Report Generator uses three different Setup Strings to determine
how to layout the lines of text before printing begins. These strings
also determine when to skip to the next page, and what escape sequence
should be sent to the printer. The Report generator automatically
selects the setup string and the page size that best fits the report.
If one line of the report will fit in the width specified in Width 1,
the Level 1 setup string will be used. If the line of the report is
too wide for Level 1 Width, but is less than or equal to the Level 2
Width, the Level 2 setup string will be used. If the report is too
wide for the Level 2 Width, but is less than or equal to the Level 3
Width, the Level 3 setup string will be used.
If the report is still too wide, the report generator will utilize
more than one line of the page per record printed, and will print on
one line as many fields as will print without breaking, and will then
wrap to the next line.
Shareware Tracker Ver 3.11 Page 27
---------------------------------------------------------------------
*************
TIP: You can force the report generator to use the same setup
string, width and line all the time by setting all three levels
to the same value. This is a good idea when you are using 80
column paper in a 130 column printer.
*************
Explanation of each of the fields used to define Printer
configurations are listed below.
CONFIGURATION ID
------------------
Assigns Identification Number To Configuration
CONFIGURATION ID is a unique identifier that you assign to
each new configuration. When you want to print reports,
simply add the Configuration ID Number that corresponds to
the printer that will be used to print the report. Don't use
the numbers 1 - 4 since these numbers have already been
assigned to the standard printer configurations.
PRINTER DESCRIPTION
---------------------
Provide Brief Description Of Printer
PRINTER DESCRIPTION is where you enter a brief description of
the printer that this configuration will be set for. The
easiest description is the brand and type of printer. If
there are several printers of the same brand and type, you
need an additional identifier such as an extra number or
letter appended.
NETWORK PRINTER NUMBER
------------------------
Printer That Reports Are Routed TO
NETWORK PRINTER NUMBER is the printer number that all reports
with this configuration should be routed to. If the program
is running on a Novell network, this number should correspond
to the network-assigned printer number, where the first
network printer is number 1, the second network printer is 2,
and so on.
If the program will be running on a stand-alone PC, or if the
reports with this configuration are to be routed to a printer
connected to the first parallel port on the PC, the Network
Printer Number should be set to 0 (zero).
RESET STRING
--------------
Printer Escape Sequence that will be sent to the printer when
the report is finished printing. This should be a string that
Shareware Tracker Ver 3.11 Page 28
---------------------------------------------------------------------
will rest the printer to its default power-up condition.
*************
TIP: You should refer to the User's Manual that came with the
printer for the proper escape sequence string.
*************
LEVEL1/WIDTH/LENGTH
---------------------
Define Page Parameters
LEVEL1/WIDTH/LENGTH is used to enter setup strings, line
widths, and maximum lines per page. The number of lines per
page should allow room for printing header information. Refer
to the HP Laser Jet II example below for more information on
these fields.
LEVEL2/WIDTH/LENGTH
---------------------
Define Page Parameters
LEVEL2/WIDTH/LENGTH is used on a page when a report width
does not fit in the width defined in Level 1.
LEVEL3/WIDTH/LENGTH
---------------------
Define Page Parameters
LEVEL3/WIDTH/LENGTH is used on a page when a report width
does not fit in the width defined in Level 2.
When you are satisfied with the new Printer Configuration,
press [A] to Accept your entries. The new configuration will
be written to the Printer Setup File. If you need to make a
change, press [R] and you will be able to make changes to the
appropriate field.. Press [C] to cancel the entire entry.
Repeat the above steps for each new Printer Configuration you
want to add.
SAMPLE PRINTER SETUP
----------------------
To follow along with this example you need to select Configuration ID
'HP', Printer Name 'HewlittPackard Laser Jet II' from the List Of
Printer Configurations. Once selected, read the following explanation
of the Level 1, Level 2, Level 3, Width and Length fields.
Notice the \027 in each of the Setup strings and Reset strings. Any
time you want to include a character in a string that cannot be
entered through the keyboard, you must enter a backslash (\) followed
Shareware Tracker Ver 3.11 Page 29
---------------------------------------------------------------------
by the character's ASCII value. You MUST use three positions for the
ASCII value even if it is less than 100. On a HewlittPackard Laser
Printer, the Escape key has an ASCII value of 27. \027 was entered
because three positions need to be filled. This value (\027) tells the
printer that the text to follow is not to be printed, but is to be
interpreted as the configuration information.
The Level 1 Setup String tells the report generator to set the printer
to Courier font, that 80 characters will fit on one line and that no
more than 55 lines of the page will be used.
The Level 2 Setup Sting tells the report generator to switch to the
16.6 Pica font and that 130 characters will fit on one line.
The Level 3 Setup String tells the report to stay at 16.6 characters
per inch, but to switch to Landscape (sideways) printing. Now, 170
characters will fit on one line (Width = 170) and the page length will
be reduced (Length = 40).
----------------------
User-Defined Reports
----------------------
Each report is based on a primary database you select from a window.
You select the fields you want in the report, specify upper and lower
limits of field values to select for the report, and you select a
printer configuration. If the configuration you want does not exist,
you can add a new one.
You can define as many reports as you want for each file. All reports
print in a columnar format with headings. Based on the printer
configuration you select, an effort will be made to print one record
per line by switching between print sizes and types. If a complete
record does not fit on one line, it will wrap to the next line between
two fields.
SAMPLE USAGE
--------------
First, highlight "User-Defined Reports" and press [ENTER]. You will
see a window with the heading "List of Files". These are all the
databases in your application.
For now, let's say you want a print-out of all the Expenses for a last
year. Highlight "Expenses" and press [ENTER]. The bottom of the screen
will ask you to 'Enter report title or esc. to cancel' - type in
"Expenses 1991" and press [ENTER].
It will then ask for the 'Printer Configuration ID for this report'.
Type in any three-letter ID defined in the Printer Setup Utility (CIT
Shareware Tracker Ver 3.11 Page 30
---------------------------------------------------------------------
will work with most Dot Matrix printers), then press [ENTER].
After doing this, your screen will be a list of reports for
"Expenses". It should be the only one there, so highlight it and press
[ENTER]. This will bring up a "List Of Fields" screen. These are all
the fields in the "Expenses" database.
Highlight "Type of Expense" and press [ENTER]. A "Field Definition"
screen will appear. "Type of Expense" will be the only one there,
press [ENTER]. The screen will ask you for the lower and upper limit.
This is a way to filter out unwanted records. We will do the filtering
with the "Date" field, so we won't need to enter anything here. Leave
these blank, and press [ENTER] two times.
Now we're back at the "List Of Fields" screen, press [INS] to add a
new field. Using the down arrow key, highlight "Date" and press
[ENTER]. At "Field Definition", select "Date" and press [ENTER] again.
This is where we'll filter out the unwanted records. All we want is
the entries where dated 01/01/91 to 12/31/91. Therefore, in 'Lower
Limit' type 01//1/91, in the upper limit type 12/31/91. This will only
report on 1991 by setting the filter this way.
Now add the rest of the fields you want included in the report by
using the [INS] key and doing the same things that you already did.
UPPER AND LOWER LIMIT
-----------------------
If you wanted a report listing all the names in the files up to, and
including, those starting with the letter 'P'. Type 'A' in lower limit
and 'P' in upper limit. Or if you only wanted all the Smith's listed,
type 'Smith' in both lower and upper limits.
That's it, we're finished. Press [ESC]. The program will ask you if
you want to print the report now. Highlight 'Yes' (or 'No') and press
[ENTER].
If you have reports already defined and want to print one of them,
select the database the report was defined from and press [ENTER].
Then select the defined report and press [ENTER]. And at the "Field
Definition" screen, press [ESC].
---------
Letters
---------
The bad news is this is not WordPerfect 5.1. The good news is this is
not WordPerfect 5.1..meaning that this will be a lot easier to master.
Shareware Tracker Ver 3.11 Page 31
---------------------------------------------------------------------
Theoretically, this program can write files up to 64K. But, and this
is a big BUT, you must have enough RAM memory to do it. You must have
enough available RAM equal to twice the size of the file you are
editing. In most cases this will never be a problem. But you might not
be able to write THE GREAT AMERICAN NOVEL.
ACTIVE KEYS
-------------
KEY ACTION
--------- ------------
[F1] Help screen listing all commands
[ALT]-[A] (A)ppend a file to current file
[ALT]-[B] Place block marker (or execute block command if both
block markers have already been placed.
[ALT]-[F] Insert (F)ield (for merge mailings)
[ALT]-[G] (G)o to line number
[ALT]-[L] Page (L)ength for printing
[ALT]-[M] Change (M)argins
[ALT]-[N] Edit (N)ew file
[ALT]-[P] (P)rint file
[ALT]-[Q] (Q)uit but save edits
[ALT]-[R] Search and (R)eplace
[ALT]-[S] (S)ave file and continue
[ALT]-[T] (T)oggle word wrap on/off
[ALT]-[W] (W)rite to new file
[ALT]-[X] E(X)it immediately without saving
[ALT]-[Y] Change director(Y) /wildcard
EDIT WINDOW / STATUS LINE
---------------------------
When you enter this option, the edit window takes up nearly the full
screen. You will be prompted to enter the name of the file you wish to
edit.
There is a status line at the bottom of the screen, which displays the
name of the file being edited (minus the directory), the current line
and column position of the cursor, the left and right margins, and the
status of the word wrap and insert modes (displayed when active as
"<Wrap>" and "<Ins>", respectively). When a file has been edited, an
asterisk will appear at the right side of the top row next to the
"Alt-H = Help" message.
FILES - CHANGING, NEW, DEFAULT
--------------------------------
When you press [ALT]-[N] to edit a new file or [ALT]-[W] to write to
another file, a scrolling window will appear containing all files that
Shareware Tracker Ver 3.11 Page 32
---------------------------------------------------------------------
match the current directory and wildcard mask. The directory and
wildcard mask will be shown at the top of this window for reference.
To select a file, move the highlight bar to it and press [ENTER].
To create a new file, select the option "NEW FILE", then enter the new
file name. Pressing [ESC] will abort the file selection process.
If you attempt to write to a file that already exists, or append from
a file that does not exist, you will get a message to that effect.
ALT-B: BLOCK COMMANDS
-----------------------
Blocks of text may be deleted, copied, moved, printed, or case
converted. You must first mark a block of text by pressing [ALT]-[B]
at the beginning, move the cursor to the end of the block and press
[ALT]-[B] again. If you wish to move or copy this block of text, move
the cursor to the target position, then press [ALT]-[B] again. You
will see a pop-up menu of block commands ("Move", "Copy", "Kill",
"Print", "Uppercase", Lowercase", "Erase Markers"). Select one of them
by moving the highlight bar to it, and press [ENTER].
ALT-F: FIELD INSERTION FOR MAIL MERGING
-----------------------------------------
You can easily insert fields from the "Who I Know" database into your
documents to create merge mailings.
First move the cursor to the location where you wish to insert the
field. Then press [ALT]-[F] to display a window containing all
available field names. Move the highlight bar to the desired field
name and press [ENTER] to insert it, or press [ESC] to exit without
inserting a field.
Notice that the field name is surrounded by curly braces ("{ "Smith"
}"). When the document is printed, anything surrounded by the curly
braces will be replaced by the actual contents of the field.
If you have inserted fields into your document for Mail Merging and
press [ALT]-[P] to print, you will be asked if you want to print more
than one document. Press "N" will print the first record in the
database, whoever that might be. Pressing "Y" will call the "File
Filter" program. This program is discussed later in this help screen.
Or see the Appendix in the User's manual for more information.
Shareware Tracker Ver 3.11 Page 33
---------------------------------------------------------------------
ALT-T: WORD WRAP
-------------------
The Word Wrap mode is "on" when you enter this option. To turn it off
press [ALT]-[T], turn it back on by pressing it again.
INSERT MODE
-------------
To change from Insert to Typeover mode and back again, press the [INS]
key.
ALT-L: PAGE LENGTH
--------------------
The page length is set at 60 lines when you enter this option. You can
change it at any time by pressing [ALT]-[L].
ALT-M: MARGINS
----------------
The start up margins for the printer are set at left column 1 and
right column 80. However you can change these by pressing [ALT]-[M]
and entering the desired settings. When you change them the on-screen
display will adjust to reflect the changes. You may use larger values
than would appear on the 80 column screen. In such instances you
should toggle word wrap "off" and scroll to the right to display text
beyond the on-screen right margin. The current values of the margins
appears on the status line.
ALT-P: PRINTING
-----------------
You may print the current file at any time by pressing [ALT]-[P].
Printing may be aborted at any time by pressing [ESC]. The format of
the printed page is determined by the current settings of the page
length and margins.
If you have inserted field in this document and wish to print a mail
merging, a filter will appear here to allow you to select which
records will be printed. (It is explained later in this chapter. (See
"FILE FILTER")
ALT-R: SEARCH AND REPLACE
---------------------------
You can search for all or only specific occurrences of a character
string. When you press [ALT]-[R], you will be prompted to first enter
Shareware Tracker Ver 3.11 Page 34
---------------------------------------------------------------------
the search string, then the replacement string. You will then be asked
if you want to replace all occurrences of the search string. If you
select "No", you will be prompted to enter the number of occurrences
to replace. Please note that the search begins at the top of the file
and continues either to the end of the file or until the number of
occurrences you specified has been replaced.
ALT-Y: CURRENT DIRECTORY / WILDCARD
-------------------------------------
This little word processor gives you the ability to change the working
directory or filemask at any time. When you first enter it, the
current directory will be set to the default DOS directory, and the
wildcard will be set to "*.*". If you would like to change either the
directory where this program looks for files or the wildcard used
(e.g., "*.txt", "*.doc"), press [ALT]-[Y] and enter the new
information. You do not have to enter slashes ("\") in front or back
of the directory UNLESS you include a wildcard.
For example, to change the current directory to "\MYSTUFF\", you only
need to enter "MYSTUFF" (no quotes). However, if you want the program
to only look for ".LET" files in the MYSTUFF directory, you must enter
"\MYSTUFF\*.LET".
FILE FILTER
-------------
This is a utility with muscle. It allows you to create and save
complex queries (filters) for your "Who I Know" database.
VIEWING AND SELECTING A QUERY
-------------------------------
When you enter you will see a window containing descriptions of all
available queries, along with the database aliases to which they
correspond.
ACTIVE KEYS
-------------
[UPARROW] Move highlight bar up one query
[DOWNARROW] Move highlight bar down one query
[F7] Counts records matching current query
[F8] Delete current query
[F9] View criteria for current query
[F10] Create a new query
[ENTER] Run current query
[ESC] Exit the query module
Shareware Tracker Ver 3.11 Page 35
---------------------------------------------------------------------
CREATING A NEW QUERY
----------------------
Viewing field names and descriptions:
Pressing [F10] from the query window will bring up the criteria
screen. A scrolling window containing field names of your database
will appear on the right of the screen.
The following commands are available:
[ENTER] Select current field
[UPARROW] Move highlight bar up
[DOWNARROW] DownArrow Move highlight bar down
Letters(A-Z) Move to the next field beginning with that
letter
Selecting an operator
-----------------------
Pressing [ENTER] will bring up the operators window, which contains
the following choices:
a) Equal to
b) Less than
c) Greater than
d) Less than or equal to
e) Greater than or equal to
f) Not equal to
g) Contains
h) Sounds like
Use the Up and DownArrow to select the desired operator, the
press [ENTER] to continue.
Selecting a value
-------------------
When you have selected an operator, another window will appear below
the operators window. This window will contain the field name and the
operator. Type in the desired value for this field, then press
[ENTER].
If you wish to see all the available values in your database, press
[ALT]-[V] to pop up a scrolling window of the values. You may select
one of these by highlighting it and then press [ENTER], or you may
press [ESC] to exit without selecting anything.
Selecting a Boolean operator
------------------------------
When you have entered the value, another window will appear below the
Shareware Tracker Ver 3.11 Page 36
---------------------------------------------------------------------
value window. This window contains the following choices:
a) "Discard"
b) ".AND."
c) ".OR."
d) ".AND("
e) ".OR("
f) ").AND."
g) ").OR."
h) "<<DONE>>"
Move the highlight bar to the desired selection, and press [ENTER].
You will note that option f) and g) will not be available to you until
you have embedded an open parenthesis in your query.
Ending the query
------------------
When you are finished building the criteria for this query, select
<<DONE>> from the Boolean operator window. You will then be asked to
enter a description for this query for future reference. The
description may contain up to fifty characters. Press [ENTER] when you
are finished entering the description, and you will be returned to the
query window. If you want to exit without saving this query press
[ESC].
If you wish to run this query immediately without saving it for future
use, simply leave the description empty and press [ENTER].
---------------------
To Registered Users
---------------------
Use this option to write mail merged letters to all your users.
------------------
With Submissions
------------------
Use this option to send mail merged letters with submissions.
------------
To Authors
------------
Write mail-merged letters to authors.
Shareware Tracker Ver 3.11 Page 37
---------------------------------------------------------------------
-------------------
To Vendors & BBSs
-------------------
Mail-merge letters from the dealer database.
========
Labels
========
This will mail-merge and print labels from your databases. It uses
standard 15/16" by 3-1/2", 1 Across labels.
----------
To Users
----------
This option prints mail-merged labels to registered user.
-----------------
For Submissions
-----------------
This option will mail-merge labels to your submissions.
------------
To Vendors
------------
This option will print mail-merged labels from your dealer database.
------------
To Authors
------------
This option will mail-merge labels from you author database.
----------------------
Other Label Printing
----------------------
This option will print out return address mailing labels for you.
Shareware Tracker Ver 3.11 Page 38
---------------------------------------------------------------------
Line 1
------
Type in the first line of this label.
Line 2
------
Type in the second line of this label or leave it blank.
Line 3
------
Type in the third line of this label or leave it blank.
Line 4
------
Type in the fourth line of this label or leave it blank.
Line 5
------
Type in the fifth line of this label or leave it blank.
=========
Reports
=========
A number of pre-defined reports are available. To see the information
to be printed press the F1 key while that menu option is highlighted.
--------
Income
--------
All the options here will generate reports to show your income. If you
want a yearly statement of income, use the Set Filter option to create
criteria for the period you want reported. That is;
DATE greater than 01/01/93
.AND.
DATE less than 12/31/93
(For State Sales Tax in the 'Registered Users' report,
you could add; .AND. STATE equal to <your state>)
Then select <<done>> from the box.
Type '1993' for the description, and press [ENTER].
The registered user's report will not show additional income, since
upgrade, tech support, etc. sales might have come in a different
period than the one you defined.
Shareware Tracker Ver 3.11 Page 39
---------------------------------------------------------------------
To get a complete listing of your income, you'll need to generate a
report for each database you have made entries to. (Upgrade Sales,
Tech Support Sales, Other Income, etc.)
Or, you could get 'quick and dirty'. Select the "Business Status"
option from the 'Record Keeping' Menu, and press [Print Scrn].
The fields in this option can be edited. If you would like, you could
re-set them at the beginning of each year. Then you'd see how your
business is doing since the first of the year.
Registered Users
------------------
This option will print out the income received from the registered
users file. It will not print the totals from the Additional Income
files, since they might have accrued in a different period than you
have defined in your Filter.
It will include Sales Tax, Site Licenses, and Shipping totals.
Registration Service
----------------------
Print a list of all the 'Registration Service' income.
Royalties
----------
This option will view or print all royalty income.
Upgrade Sales
--------------
This option will list all sales of upgrades. Set a filter to view the
period you wish to view or print.
Technical Support Sales
------------------------
This option will list all tech support sales.
Shareware Tracker Ver 3.11 Page 40
---------------------------------------------------------------------
Subscription Sales
-------------------
This option will list all your subscription sales.
Source Code Sales
------------------
This option will list all source code sales.
Other Income
-------------
This option will list all your other income.
---------
Expenses
---------
This option will list all your expenses. If you want a yearly
statement of expense, use the Set Filter option to create criteria for
the period you want reported. That is;
DATE greater than or equal to 01/01/93
.AND.
DATE less than or equal to 12/31/93
Then select <<done>> from the box.
Type '1993' for the description, and press [ENTER].
The registered user's report will not show additional income, since
upgrade, tech support, etc. sales might have come in a different
period than the one you defined.
To get a complete listing of your income, you'll need to generate a
report for each database you have made entries to. (Upgrade Sales,
Tech Support Sales, Other Income, etc.)
Or, you could get 'quick and dirty'. Select the "Business Status"
option from the 'Record Keeping' Menu, and press [Print Scrn].
The fields in this option can be edited. If you would like, you could
re-set them at the beginning of each year. Then you'd see how your
business is doing since the first of the year.
Data
------
This option will print out data reports. You can 'set a filter' here
Shareware Tracker Ver 3.11 Page 41
---------------------------------------------------------------------
to list all the 'rack' vendors, or users whose tech support has
expired, or anything else you might want to see.
Registered Users
------------------
This will print out all the data in the Registered Users file. You
will be able to set a filter to print out one, all, or any users you
select. (See the File Filter in the Appendix of the manual for more
details on filtering.)
Submissions
-------------
This will print out all the data in the Submissions file. You will be
able to set a filter to print out one, all, or any users you select.
(See the File Filter in the Appendix of the manual for more details on
filtering.)
Dealers
---------
This will print out all the data in the Dealers file. You will be
able to set a filter to print out one, all, or any users you select.
(See the File Filter in the Appendix of the manual for more details on
filtering.)
Authors
---------
This will print out all the data in the Authors file. You will be
able to set a filter to print out one, all, or any users you select.
(See the File Filter in the Appendix of the manual for more details on
filtering.)
==================================================
UTILITIES
==================================================
A number of helpful utilities are provided for your convenience.
Highlight the option you prefer and press [F1] for help.
Shareware Tracker Ver 3.11 Page 42
---------------------------------------------------------------------
----------------
Set Reg Number
----------------
This option allows you to change the registration number. It can only
go higher, never lower than the present assignment.
It also allows you to turn off those annoying beeps, if you don't want
to hear them.
Last Reg.
---------
Enter the registration number you want to change to. This number
will be automatically incremented every time you add a new user.
Get Beep
--------
On or Off?
Error Beep
----------
On or Off?
Alert Beep
----------
On or Off?
------------
Sort Files
------------
This menu option packs and re-indexes all files in the system. I
suggest that you use this from time to time.
-----------------
Color Selection
-----------------
If you are using a color or composite monitor, this utility will let
you change the color settings for the screens. You can also specify
whether you want windows to explode and implode.
Press [ENTER], a screen with various color combinations will appear.
Selecting different colors for your program is simple. First, move the
edit arrow next to the area you want to re-set the colors for
(GRAPHICS, DATA FIELDS, ENHANCED, or SCREEN TEXT), then press [ENTER].
Shareware Tracker Ver 3.11 Page 43
---------------------------------------------------------------------
Using the arrow keys to select a color combination, move the edit
arrow to the left of the color you want to select, then press [ENTER]
again. A sample of the color combination will appear in the field for
which it has been chosen.
GRAPHICS
----------
Graphics characters include menu boxes and screen borders.
DATA FIELDS
-------------
Data fields are the regions of data input(reverses video region). For
example, a data field has a field length of 10, 10 spaces of the
color selected here will appear on the screen. It is in these 10
spaces that you will make your entries.
ENHANCED
----------
This changes the colors of the SELECTED menu choices and other
highlight bar options.
SCREEN TEXT
-------------
All text displayed on the screen will use this color combination.
EXPLODING WINDOWS
-------------------
This is a YES/NO option. It is used to determine whether or not your
application will have windows that explode onto the screen or sneak
into view.
******* IMPORTANT ********
After you make your selections of colors, press [ESC]. Then back all
the way out of the program using the [ESC] key. Go all the way back to
DOS. Then re-start the "Shareware Tracker" program. This will lock
your new colors and exploding windows option into a configuration
file. If you set your colors and don't do this, they will not lock in,
and the next time you access your program, it will be the way it was
originally set up. And you might not like that.
Shareware Tracker Ver 3.11 Page 44
---------------------------------------------------------------------
---------------------
Print User's Manual
---------------------
Print the user's manual.
-------------------
Registration Form
-------------------
This option will allow you to view the registration form or print it.
==================================================
HOT KEY SUMMARY
==================================================
This is a list of the hot key function of "Shareware Tracker".
Highlight the option you prefer and press [F1] for more help.
------------
F1 = Help
------------
Go to the "Menu Option" or to any place in the program where data
entry is expected and press F1 for Help.
-------------------
F2 = Help Topics
-------------------
(This procedure may be accessed by pressing hotkey F2.)
---------------------
F3 = Phone Numbers
---------------------
(This procedure may be accessed by pressing hotkey F3.)
This Pop-up Phone Directory will allow you to maintain a phone
database with names, addresses, and phone numbers of business and
personal contacts. If you have a modem, you can dial any of the above
phone numbers in the database. You may also print a pocket sized phone
directory of all the names in the database.
Shareware Tracker Ver 3.11 Page 45
---------------------------------------------------------------------
ACTIVE KEYS
-------------
A Add a record to the database
E Edit highlighted record
D Delete highlighted record
S Search for record
[UPARROW] Move up on record
[DOWNARROW] Move down one record
[Esc] Exit the directory
[ALT]-[A] View/edit address info of highlighted record
[ALT]-[B] Print phonebook
[ALT]-[L] Print listing of all names in directory
[ALT]-[P] Dial highlighted phone number
[ALT]-[R] Redial
[ALT]-[S] Set up communication parameters
The field "LD" is for long-distance. In situations where the person
has the same area code as you, yet is a long-distance call anyway, you
would want to set the "LD" field for that person to "Y". The value of
this field won't matter if the person has a different area code than
you.
AUTO-DIAL ** CAUTION **
IF YOU HAVE A MODEM, you can select [ALT]-[P] and dial the highlighted
number. If you *DON'T* have a modem, pressing [ALT]-[P] will throw you
out and you will go back to DOS. All good programs have a work-around
for problems like this, and here's mine - If you don't have a modem,
then *DON'T* press [ALT]-[P]!
COMMUNICATION PARAMETERS
------------------------
Check these settings before you attempt to use the auto-dialer. They
include,...
PBX: If this is on, all numbers dialed will be preceded by a "9" and a
half second pause. Default is off.
Modem initialization string: Sent to the modem before dialing the
number. Default is "ATZ".
Modem hang-up string: Sent to the modem after the call is terminated.
Default is "ATH".
Tone/Pulse: Set this to "T" for tone dialing, to "P" for pulse
dialing. The default is "T".
COM Port: Selects the COM Port to use for dialing. Default is 1.
Shareware Tracker Ver 3.11 Page 46
---------------------------------------------------------------------
Local Area Code: Your area code.
Timing Delay: This parameter exists because some modems like to wait
longer than others between commands. The default is 1 second. If you
are experiencing timing problems, try setting this to 1.5 or 2.0
seconds.
----------------------------
F4 = Appointment Calendar
----------------------------
(This procedure may be accessed by pressing hotkey F4.)
This is a multi-user calendar with an appointment tracker. You can
point and shoot at any date and add, edit, and delete appointments for
that date. You may also print and delete appointments for any range of
dates. More advanced featured allow you to add periodically recurring
appointments, and to view days and weeks at a glance to determine when
you have free time to schedule an appointment.
When you first enter the calendar, the current month will be displayed
along with the first two weeks of the next month. The current day will
blink. If there are any appointments for the current day, the first
seven will be displayed in a window at the bottom of the screen. Any
other days that have appointments will be displayed in reverse video
on the calendar.
ACTIVE KEYS
-----------
[LEFT ARROW] Go backward one day
[RIGHT ARROW] Go forward one day
[UP ARROW] Go backward one week
[DOWN ARROW] Go forward one week
[PgUp] Go back one month
[PgDn] Go forward one month
[HOME] Jump to first day of month
[END] Jump to last day of month
[ENTER] Add/Edit/View appointments
[P] Print appointments
[D] Delete appointments
[T] Daily time block
[W] Weekly time blocks
[C] Jump to current date (system
[S] Search for text in either description
or notes of an appointment
[ESC] Exit calendar
Shareware Tracker Ver 3.11 Page 47
---------------------------------------------------------------------
ADDING/EDITING/VIEWING APPOINTMENTS
-------------------------------------
Use the navigation keys to move to the desired date, the press
[ENTER].
A browse window will appear near the bottom of the screen showing the
time and description for all appointments. If there are no
appointments for that date, you will automatically be placed in the
Add mode. The following options are available at this point:
[A] Add new appointments
[E] Edit highlighted appointment
[D] Delete highlighted appointment
[M] Move highlighted appointment
[R] Recurring appointment
[N] edit Notes for highlighted appointment
[ESC] Exit calendar
To add a new appointment press 'A'. Enter the user ID (This is who the
appointment is for, not who it is with), along with the starting and
ending time and a brief description of the appointment.
NOTE: The TIME is a twenty-four hour clock. 3:00 PM would be 15:00,
9:00 AM would be 09:00 (You have to add the preceding '0'
before 9:00.
The ending time cannot be earlier than the starting time. In addition,
if you try to enter an appointment that creates a time conflict with
an already existing appointment, you will get an error message to that
effect. Press [CTRL]-[W] to save the new appointment or [ESC] to exit
without saving.
To edit a highlighted appointment, press 'E'. Make your changes, but
the same rules apply from the Add mode. Press [CTRL]-[W] to save the
new appointment or [ESC] to exit without saving.
To delete a highlighted appointment, press 'D'. You will be asked to
confirm your request, respond by pressing 'Yes' or 'No'.
You may move appointments from one day to another by pressing 'M'. A
window will appear and ask you for the new date for this appointment.
To add a recurring date, press 'R'. Follow the same steps as when
adding a single appointment. After you press [CTRL]-[W], you will be
given the following options:
i Every day of the week (Mon, Tues, etc.)
ii Every other day of week
iii Every...day of the month (1st, etc.)
iv Every day
Shareware Tracker Ver 3.11 Page 48
---------------------------------------------------------------------
v Every...day-of-week (e.g. 3rd Monday, etc.)
vi Every weekday
Highlight the desired option and press [ENTER].
To add or edit notes for the highlighted appointment, press 'N'. A
window will open below the appointment window, into which you may type
away to your heart's content. Press [CTRL]-[W] to save your edits, or
[ESC] to exit without saving. Appointments that have notes attached to
them will have a checkmark displayed to the right of the description.
To exit back to the calendar, press [ESC].
PRINTING APPOINTMENTS
-----------------------
To print an appointment, press 'P'. You then have the option of
printing for the current week, or for a range of dates. If you print
for a week, you will be asked for a specific user ID (or "ALL" if you
print for all users). If you print for a range of dates, you will be
prompted to enter the starting and ending dates. If there are no
appointments in that range, you will be informed. Otherwise, you will
be asked if you want to include the Notes.
DELETING APPOINTMENTS
-----------------------
To delete all appointments for a range of dates, press 'D'. You will
be asked to enter the starting and ending dates. The number of
affected appointments will be displayed, and you will be asked to
confirm your request. Press 'Yes', if you want to delete them, or
'No', if you chicken out.
TIME BLOCKS--DAILY
--------------------
As previously mentioned, when you are in the calendar and appointments
exist for the current date, they will be displayed in a window near
the bottom of the screen. However, let's say your in a hurry and need
to know what times are available during the day. Press 'T'. A graph
showing available and used time blocks will be displayed. The graph
starts at 06:00 and ends at 22:00. Each block represents a fifteen
minute interval. There will be one row for each person who has an
appointment on this date.
TIME BLOCKS--WEEKLY
---------------------
Weekly time blocks are similar to daily time blocks, but not as
detailed. When you press 'W', you will be presented with a daily
breakdown of appointments for the current week. In this display, each
Shareware Tracker Ver 3.11 Page 49
---------------------------------------------------------------------
daily graph begins at 06:00 and ends at 17:00, and each block
represents an interval of one hour.
------------------
F5 = Calculator
------------------
(This procedure may be accessed by pressing hotkey F5.)
ACTIVE KEYS
-------------
[+] Addition
[-] Subtraction
[*] Multiplication
[/] Division
[^] Exponentiation
[%] Percentage
[C] Clear current total
[E] Clear current entry
[D] Change number of decimals displayed
[R] Round to specific number of decimals
[P] Print (adding machine mode)
[M] Memory operations (see "Memory Functions")
[=] Process operation
[ENTER] Process operation
[BACKSPACE] Erase last digit entered
[ESC] Exit Calculator
MEMORY FUNCTIONS
------------------
To access the Memory Functions, press 'M'.
KEY: ACTION:
[R] Recall number stored in memory
[C] Clear memory (reset to zero)
[+] Add current number to memory
[-] Subtract current number from memory
[*] Multiply memory by current number
[/] Divide memory by current number
PRINT--ADDING MACHINE MODE
----------------------------
By pressing 'P' for print, the calculator emulates an adding machine.
This will be noted by a small 'P' next to the numbers window. Each
calculation will be sent to the printer (if it is on- line). After
all, if you've invested several thousands of dollars in PC hardware
and software, why spend more for a ten-digit adding machine? Press 'P'
Shareware Tracker Ver 3.11 Page 50
---------------------------------------------------------------------
again to toggle adding machine mode off.
OTHER STUFF
-------------
The arrow keys will move the calculator around on the screen to get it
out of the way of something you might want to look at.
Pressing [ALT]-[F10] will bring up a screen that allows you to change
the colors of the calculator. It works pretty similar to the color
selection utility. I'm not typing out all the information about that
again, I've been sitting here too long already. Play around with it,
you'll figure it out.
----------------
F10 = Indexing
----------------
In any browse screen you may choose a different way to index that
particular file by pressing [F10]. Use the arrow keys to select the
desired index and press [ENTER]. The browse screen will sort the files
the way you tell it to.
=================================================
ORDERING INFORMATION
=================================================
To register your copy of Shareware Tracker, you can mail a check or
money order directly to us. Simply print a copy of the registration
for, which is supplied in the file REGISTER.TXT. This form may be
printed from within the program by selecting the "Registration Form"
option from the UTILITIES pull-down menu. Alternately, you can print
it directly from the DOS command line by issuing the following
command:
COPY REGISTER.TXT PRN
Then, just fill it out and mail it any your payment to the address
shown on the form.
CREDIT CARD PAYMENTS:
---------------------
You can also register your copy of Shareware Tracker using your credit
card.
To use your MasterCard or Visa, you can call 1-317-782-9903, or by
CompuServe via an email message to 73567,1547. Tell them you want to
register 'Shareware Tracker". Be sure to include the name & address listed
in the card, your phone number, card number and expiration date.
Shareware Tracker Ver 3.11 Page 51
---------------------------------------------------------------------
REGISTER VIA COMPUSERVE:
------------------------
You can also register Shareware Tracker via the Compuserve Shareware
Registration Service. Type GO SWREG, and select item #1495
=================================================
PRODUCT SUPPORT
=================================================
Registered users are entitled to full product support via mail or
telephone for a period of not less than 90 days. Support may also be
obtained via Compuserve email, and other electronic services. If
technical problems in the software are discovered within 90 days of
registration, RMH Computer Services will, at their option, either
provide a workable solution to the problem or a refund of the
registration cost. After the initial 90 days, RMH Computer Services is
only obligated to make reasonable effort to supply a revised copy of
the software.
Support for unregistered users will be available in regards to product
installation and basic program operation.
Support via mail is available at RMH Computer Services, PO Box 657,
Beech Grove IN 46107-0657 USA. Telephone support is available at
317-782-9903 between the hours of 08:00am - 06:00pm EST. Email support
is also available via our BBS at 317-784-2147 24hrs/day (*). You may
also direct email to Richard Holler via Compuserve [73567,1547],
INTERNET:73567.1547@compuserve.com, FidoNet NetMail [1:231/290], and
RIME private/routed email [->5056].
(*) When logging on to the BBS, using the name RMH COMPUTER, and a
password of SERVICES will take you directly to the RMH Computer
Services support/distribution area, and will bypass all of the 1st
time caller questionaires.