home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
High Voltage Shareware
/
high1.zip
/
high1
/
DIR13
/
BAT_FORM.ZIP
/
READ.ME
< prev
Wrap
Text File
|
1993-09-01
|
6KB
|
84 lines
The initial screen should look like this:
┌──────────────────────────────────────────────────────────────────────────────┐
│ │
│ "Batch" Format Drive (A/B): _ │
│ │
│ Which Density Floppy: │
│ │
│ 1) 3½" Double Density ( 720k) │
│ 2) 3½" High Density (1.44M) │
│ 3) 3½" Extra Density (2.88M) │
│ 4) 5¼" Double Density ( 360k) │
│ 5) 5¼" High Density (1.2 M) │
│ │
│ │
│ │
│ │
│ │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
At the "Batch" Format Drive (A/B): prompt press either A or B
or the Escape key (or Control+C).
At the Which Density Floppy: prompt press 1, 2, 3, 4, 5 or the
Escape key, again. You should then see something like...
┌──────────────────────────────────────────────────────────────────────────────┐
│ │
│ "Batch" Format Drive (A/B): a │
│ │
│ Which Density Floppy: 2 │
│ │
│ 1) 3½" Double Density ( 720k) │
│ 2) 3½" High Density (1.44M) │
│ 3) 3½" Extra Density (2.88M) │
│ 4) 5¼" Double Density ( 360k) │
│ 5) 5¼" High Density (1.2 M) │
│ │
│ │
│Formatting 1.44M │
│ 6 percent completed. │
│ │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
At the Format Another ? prompt press N or the Escape key if
you're all done, otherwise a Y or the Enter (Return) key will begin the
Formatting of the disk in the selected drive (so change floppies BEFORE
pressing the key)...
┌──────────────────────────────────────────────────────────────────────────────┐
│ │
│ "Batch" Format Drive (A/B): a │
│ │
│ Which Density Floppy: 2 │
│ │
│ 1) 3½" Double Density ( 720k) │
│ 2) 3½" High Density (1.44M) │
│ 3) 3½" Extra Density (2.88M) │
│ 4) 5¼" Double Density ( 360k) │
│ 5) 5¼" High Density (1.2 M) │
│Format Another ? _ │
│ │
│Formatting 1.44M │
│100 percent completed. │
│ │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
For this BATCH file to work you MUST be using 4Dos (which means
it will *PROBABLY* work with NDos). I'm using 4Dos ver 4.02 rev B and
haven't tested it with anything else. You can rename the file to any-
thing you like (I use BF.BTM). If there's a problem you can let me know,
but its dubious that I'll have time for anything esoteric, which leads
me to...
This program is released into the Public Domain
because that's what its worth !
Mr. Jiggs
Fotobeam/Brookside SysOp
(617) 893-6812