home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3
/
hamradioversion3.0examsandprograms1992.iso
/
rtty
/
hc910308
/
hc.cfg
< prev
next >
Wrap
Text File
|
1991-03-08
|
5KB
|
178 lines
#
# HamComm 1.3 sample configuration file
#
#
# HamComm will automatically search for this file on program startup.
# The current directory is searched first, then all directories along
# the current "PATH" environment variable.
#
# The character '#' starts a comment. All characters up to the end of
# the line are ignored, including the '#' character itself.
#
# Numbers are normally entered in decimal notation, but you can also use
# hexadecimal values starting in '0x'.
#
#
# Setup serial ports
#
# HamComm maintains an internal table of available serial ports.
# Every port has a unique base io-address and interrupt request line.
# Up to four ports can be defined. On startup the table looks like this:
#
# iobase irq
# COM1 0x3f8 4
# COM2 0x2f8 3
# COM3 0 0
# COM4 0 0
#
# COM1 and COM2 are predefined to their standard values.
# COM3 and COM4 are undefined.
# Undefined ports can not be selected from the 'Port' menue.
#
# Let's assume we have a non-standard serial port at address 0x3E8 (hex)
# using interrupt request 5. The following 'define port' statement will
# make this port available as COM4.
#
define port com4 iobase 0x3e8 irq 5
#
# We can also redefine any port using the 'define port' statement.
#
# For the following example let's assume we have a mouse connected to
# COM1, so we don't want HamComm to fool around with this port.
# The following statement will reset the base address and irq for COM1
# to protect the mouse driver. COM1 is now no longer available from
# the 'Port' menue.
#
define port com1 iobase 0 irq 0
#
# At startup HamComm normally uses the first available port from the
# port table. This can be changed with the 'select port' statement.
# Undefined ports can not be selected.
#
select port com4
#
# Set startup audio center frequency for receive and transmit tones.
# You may select any value between 500Hz and 2000Hz (default is 700Hz).
#
set afcenter 750
#
# Set startup audio frequency shift between mark and space tones.
# You may select any value between 25Hz and 1000Hz (default is 170Hz).
#
set afshift 170
#
# When the TX data buffer runs empty during transmit mode, HamComm will
# automatically start sending idle characters. This feature is normally
# disabled but can be activated with the following command:
#
set diddle on
#
# The transmitter needs a little time to start after we pull the ptt line.
# Set the TXDELAY to the number of milliseconds required.
# 50ms should be enough for almost any modern transceiver.
#
set txdelay 50
#
# Now specify the time to wait after TXDELAY until we send out
# the first character. Time for your qso partner to tune in.
#
set txwait 2000
#
# Define some standard texts. They can be selected for transmission
# from the 'Text' menue. The texts labelled SHIFT_Fx can also be send
# by pressing the correspondig function key.
#
# Double quotes (") are only required if the string contains spaces.
#
# A text can be included in another text by surrounding its name
# with '~' (tilde) characters. If the name starts with an AT sign (@)
# HamComm will look for a file with that name. See 'station.txt' for an
# example. Note that the text in the included file can itself include
# other texts or files. Make sure that there are no circular references!
#
#
# Define text elements for function keys SHIFT_F1 - SHIFT_F10.
#
define text SHIFT_F1 " ryryryry cq cq cq de ~mycall~ ~mycall~ ~mycall~"
" ~mycall~ ~mycall~\n"
define text SHIFT_F2 " ryryryry ~call~ ~call~ ~call~"
" de ~mycall~ ~mycall~ pse k k k\n"
define text SHIFT_F3 " ryryryry ~call~ de ~mycall~\n"
define text SHIFT_F4 " back to you ~name~... ~call~ de ~mycall~ pse k k k\n"
define text SHIFT_F5 ~@station.txt~
define text SHIFT_F7 " ~call~"
define text SHIFT_F8 " ~mycall~"
define text SHIFT_F9 "ryryryryry"
define text SHIFT_F10 " pse k k k\n"
#
# Define other text elements
#
define text banner "\noooo o ooooo o o ooooo ooo"
"\no o o o o o o o o"
"\no o o oooo o ooo o"
"\no o o o o o o o"
"\noooo ooooo oooo o ooooo ooo\n"
define text mycall dl5yec
define text myname django
define text myqth paderborn
define text mylocator jo41jr
#
# Some standard phrases
#
define text std10 " the temperature is abt "
define text std09 " the weather today is "
define text std08 " 73 es 55 to you ~name~ and your family."
define text std07 " tnx for the nice qso and hope to cuagn."
define text std06 " how do you copy ?"
define text std05 " your report is "
define text std04 " locator ~mylocator~ ~mylocator~"
define text std03 " my qth is ~myqth~ ~myqth~ ~myqth~"
define text std02 " my name is ~myname~ ~myname~ ~myname~."
define text std01 " tnx for answering my call."
#
# Ignore rest of config file
#
exit
73 es 55 de DL5YEC