home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3
/
hamradioversion3.0examsandprograms1992.iso
/
packet
/
pmp11
/
pmp.cfg
next >
Wrap
Text File
|
1991-08-05
|
3KB
|
150 lines
#
# PMP Configuration file
#
# For PMP Version 1.1
#
# Last modified: 07/30/91 acp
#
#
# MYCALL Operator's callsign
#
mycall n8kei
#
# PTHRESH The max I packet size for retries. If the unACKed packet
# is longer than PTHRESH, a RR/Poll is sent, else the packet
# is repeated (ala AX.25 Version 1.0)
pthresh 20
#
# TXDELAY The wait after keying up and before transmitting starts
# (in milliseconds)
#
txdelay 250
#
# RETRY Max number of retries before a connection is dropped.
#
retry 16
#
# FRACK Parameter used to calculate the timeout time before retrying
# (in seconds)
#
frack 5
#
# CHECK Link keep-alive timer (in seconds). After this many seconds
# of inactivity, the remote node is polled.
#
check 300
#
# MAXFRAME Specifies the maximum number of frames outstanding before
# an ACK is expected.
maxframe 1
#
# PACLEN Sets the maximum packet length in bytes, must be between
# 1 and 256.
paclen 128
#
# CLOCKSKEW Enables or disables clock skewing. When running PMP, the
# BIOS clock will loose time. If CLOCKSKEW is enabled, PMP
# attempts to correct this by speeding the BIOS clock slightly.
# A zero value disables, and a non-zero value enables.
clockskew 1
#
# Screen attributes
#
# These five parameters set the screen colors/attributes
# (the default settings are for a monochrome display)
#
normal 3
inverse 112
status 112
bright 11
message 112
#
# SOUND Enables/disables sound. A one value enables, a zero value
# disables.
#
sound 1
#
# CAPTURE Specifies the size, in bytes, of the RAM capture buffer.
# After this buffer is filled, the contents are flushed to
# disk. Larger values will minimize disk writes. Values
# should be a multiple of a MS-DOS sector size (512 bytes).
capture 4096
#
# CTEXT Text sent out first during an incoming connect. You can
# have up to 10 lines in a CTEXT message.
#
ctext Hello! If I'm not around, please leave a message.
ctext (I'm running a homebrew TNC setup. There may be bugs!)
ctext
#
# BTEXT Text sent during a beacon
#
btext +++++ Poor Man's Packet (PMP) Version 1.1 +++++
#
# BADDR Address (and path) to which beacons are sent.
#
baddr cq v w2cxm-1
#
# BEACON Sets beacon interval (in seconds). A beacon interval of zero
# turns beaconing off.
#
beacon 0
#
# PTTPORT Sets the PTT port, bit mask, and active level.
#
pttport 0x378 2 0
#
# TXPORT Sets the TX data port and bit mask.
#
txport 0x378 1
#
# CDPORT Sets the CD port, bit mask, and active level.
#
cdport 0x379 0x80 0
#
# RXPORT Sets the RX port and bit mask.
#
rxport 0x379 8
#
# INIT Sends initialzing values to ports. This statement is useful
# to initialize any necessary hardware before starting PMP
# (like mini-modems powered from spare output bits).
#init 0x378 0xff
#
# DEFINE Function key (F1-F8) definitions.
#
define f1 ~cn8kei v w2cxm-1^m
define f2 lm^ml^m
define f3 CQ +++++ CQ CQ de N8KEI Ithaca, NY (Connect to N8KEI-15) +++++^m
define f4 ~ccrtlnd v w2cxm-1^m
define f5 users^minfo^mroutes^m
define f6 The quick brown fox jumped over the lazy dog's back.
#
# AUTOWRAP Defines the column at which autowrap is active. A value of
# zero disables autowrap.
#
autowrap 0