home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3
/
hamradioversion3.0examsandprograms1992.iso
/
mods
/
e-fmods
/
ft727r.2
< prev
next >
Wrap
Text File
|
1990-09-04
|
1KB
|
38 lines
FT727R.2
Key Codes:
CAT Control consists of duplication the keystrokes that can be made on
the tranceiver keypad by sending the corresponding keycodes to the
Serial Keycode Input contact of the CAT jack. The most significant
four bits (MSD) correspond with the key column and the least
significant four bits (LSD) correspond with the key row. The Function
key (on the side of the tranceiver) is simulated by setting bit 7.
Results are identical to those described for manual operation in the
FT-727R Operating Manual. Serial Meter Output is sent approximately
every 100 ms while receiving.
[Table for the codes. The lines in [] are the original values in the
Yaesu handout, and are followed by the corrected lines as determined
by KB7ABA. Remove the lines in [] to see what should be the right
table.]
[ @ FUNC F E D C B ]
@ FUNC 8 9 A B C
MSD @
[ @ NORM 7 6 5 4 3 ]
@ NORM 0 1 2 3 4
LSD
V
E +RPT SIMP -RPT PMS P SET
1 2 3 V c
D SAV-T T-DEC T-SET TX-M S/CH
4 5 6 M MR
B SAVE T-ENC SCAN MC Shift
7 8 9 C <=>
7 LOCK BATT BEEP DUP Step
* 0 # V/U D