home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 1
/
HamRadio.cdr
/
tech
/
palsum3
/
expand.msg
< prev
next >
Wrap
Text File
|
1988-02-01
|
7KB
|
182 lines
0000 Reserved.
0010 Reserved.
0020 Reserved.
0100 \nPALASM2 EXPAND, V2.22 - MMI INTERNAL RELEASE (04-28-87)\n
0100 (C) - COPYRIGHT MONOLITHIC MEMORIES INC., 1987\n\n
0150 \n %%%% EXPAND %%%% Program Successful. File: %s\n
0150 %%%% EXPAND %%%% ERROR count: %d WARNING count: %d\n
0160 \n %%%% EXPAND %%%% Program Unsuccessful. File: %s\n
0160 %%%% EXPAND %%%% ERROR count: %d WARNING count: %d\n
0200 >> ERROR Output Message File Open Error. File: %s\n
0210 >> ERROR Output Message File Close Error.\n
0220
1000
1010 >> ERROR Multiple defaults in a state transition equation.\n
1020 >> ERROR Multiple state transition equations for the same state.\n
1100 >> ERROR Mixed registered and combinatorial state output equations.\n
1110 >> ERROR Multiple defaults in a state output equation.\n
1120 >> ERROR Multiple state output equations for the same state.\n
1130
1200 >> ERROR Moore and Mealy directives both used.\n
1210 >> ERROR Moore machine with conditional outputs.\n
1220 >> ERROR Missing state transition equation.\n
1230 >> WARNING Missing state transition equation. Using default.\n
1240 >> ERROR Device selected isn't supported for state machines.\n
1250 >> ERROR Overlapping state transition conditions.\n
1260 >> ERROR Overlapping state output conditions.\n
1300 >> WARNING Last next state default is next state.\n
1310 >> WARNING Missing default next state.\n
1320 >> WARNING Unreached next states.\n
1330 >> WARNING Hold directive specified on a combinatorial output.\n
1350 >> WARNING Attempting to automatically assign a state bit.\n
1360 >> ERROR State bit assignment failed.\n
1361 >> ERROR Not enough states were manually assigned in PLS design.\n
1370
1400 >> ERROR State bit assigned to combinatorial output.\n
1410 >> ERROR Registered state output bit assigned to combinatorial output.\n
1420 >> ERROR Combinatorial state output bit assigned to registered output.\n
1430
1600 >> ERROR Undefined value for state bit.\n
1610 >> ERROR State Value Equations must use exactly the same state bits.\n
1620 >> ERROR Not enough registered outputs for states.\n
1630 >> ERROR Memory allocation failed. Out of memory.\n
1640
1800 >> ERROR Illegal Simulation command type.\n
1810 >> ERROR Simulate Section: Conditions aren't allowed...yet.\n
1820 >> ERROR Illegal Simulation element.\n
1830 >> WARNING Simulation state not active.\n
1840
2000 >> ERROR Input Design (TRE) File Open Error.\n
2010 >> ERROR Input Design (TRE) File Close Error.\n
2030 >> ERROR Output Design (TRE) File Copy Error.\n
2100 >> ERROR State Section: Illegal equation type.\n
2110 >> ERROR Conditions Section: Illegal equation type.\n
2120 >> ERROR Equations Section: Illegal equation type.\n
2130 >> ERROR Simulate Section: Illegal equation type.\n
2140 >> ERROR Input Design (TRE) File Read Error.\n
2150
2400 >> ERROR Output Design (TRE) File Open Error.\n
2410 >> ERROR Output Design (TRE) File Write Error. Bad equation.\n
2420 >> ERROR Output Design (TRE) File Write Error.\n
2430 >> ERROR Output Design (TRE) File Close Error.\n
2440
2700 >> ERROR Input Design (TRE) File Syntax Error.\n
2710
3000 >> ERROR Device selected is not currently supported.\n
3001 >> ERROR Cannot open PALPDF.PDF file.
3002 >> ERROR PAL device is not supported.
3003 >> ERROR Format of PALPDF.PDF file is incorrect.
3010 >> ERROR Part Definition File (PDF) Open Error.\n
3011 >> ERROR Cannot open PLSPDF.PDF file.
3012 >> ERROR PLS device is not supported.
3013 >> ERROR Format of PLSPDF.PDF file is incorrect.
3014 >> ERROR Data structure for device incorrectly formed from PLSPDF.PDF.
3020 >> ERROR Part Definition File (PDF) Read Error.\n
3030 >> ERROR Memory allocation failed. Out of memory.\n
3040
3060 >> ERROR Prose device selected, no processing performed.\n
3400 ** ERROR Boolean expression processing failed. Illegal Token.\n
3410 >> ERROR State substitution failed. No state value.\n
3420 >> ERROR Condition substitution failed. Recursive Definition.\n
3430 >> ERROR Condition substitution failed. Non-boolean condition.\n
3500 >> ERROR Boolean expression processing failed. Too many signals.\n
3550 ** ERROR Simulator boolean expression processing failed.\n
3560
3700 >> ERROR Memory allocation failed. Out of memory.\n
3710
4000 >> ERROR State has more than one state value equation.\n
4010 ** ERROR Illegal state index.\n
4020 >> ERROR Illegal signal in a list.\n
4021 >> ERROR Incorrect number of signal names in pin list.\n
4030 >> ERROR Signal appears more than once in a list.\n
4040 >> ERROR Condition has more than one equation.\n
4050 ** ERROR Illegal condition index.\n
4100 >> ERROR Illegal pin number.\n
4110 >> ERROR Node has more than one equation.\n
4120 >> ERROR Minimize switch different for ON and OFF cover.\n
4130 >> ERROR Assignment operator different for ON and OFF cover.\n
4140
4300 >> ERROR Overlap between ON and OFF cover.\n
4310
4500 >> ERROR Minimization failed. Result incorrect.\n
4501 >> ERROR Memory allocation failed. Block requested too large.\n
4502 >> ERROR Memory allocation failed. Out of memory.\n
4503 >> ERROR Memory free failed.\n
4510 ** ERROR Esp: No solution possible (check equations).\n
4511 ** ERROR Esp: Inconsistent Frequency Table.\n
4520 ** ERROR Esp: Cube not covered in REDUCE.\n
4530 ** ERROR Esp: split_select index error.\n
4531 ** ERROR Esp: split_two_select index error.\n
4532 ** ERROR Esp: large_cube_index -- bestindex -1.\n
4540 ** ERROR Esp: cover capacity exceeded.\n
4550 ** ERROR Esp: ON and OFF sets aren't orthogonal (check equations).\n
4560 >> WARNING File: Tree file name is not unique, palasm2.tre is assumed. \n
4570 >> WARNING File: Log file name is not unique. Log output ignored.\n
4580 \n
4580 >> EXPAND HELP: Incorrect expand parameters. \n
4580 >> Command to invoke expand: \n\n
4580 expand [OPTIONS...] \n\n
4580 OPTION: [filename[.tre]] \n
4580 -tre [filename[.tre]] \n
4580 -log [filename[.log]] \n\n
4580 Option flag description:\n
4580 [filename[.tre]] - Input tree file name. \n
4580 -tre [filename[.tre]] - Output tree file name. \n
4580 -log [filename[.log]] - Error log file name. \n\n
5061 20RA10
5062 20RS10
5063 32R16
5064 64R32
5100 10H8
5101 12H6
5102 14H4
5103 16H2
5104 16C1
5105 10L8
5106 12L6
5107 14L4
5108 16L2
5109 16L8
5110 16R8
5111 16R6
5112 16R4
5113 16P8
5114 16RP8
5115 16RP6
5116 16RP4
5117 20R8
5118 20R6
5119 20R4
5120 12L10
5121 14L8
5122 16L6
5123 18L4
5124 20L2
5127 14R21
5132 20C1
5133 20L10
5134 20X10
5135 20X8
5136 20X4
5137 20L8
5138 8L14
5139 6L16
5145 20S10
5146 20RS8
5147 20RS4
5161 10H20P8
5162 16RA8
5163 32VX10
5164 22RX8
5165 10H20G8
5166 22V10
5167 18P8
5168 18U8
5171 10H20GR8
5200 PLS105
5201 PLS167
5202 PLS168
6000 >> ERROR PLS parts may only have .R and .S equations.
6001 >> ERROR Non-PLS parts may not have .R or .S equations.
10000 >> ERROR The PAL device %s is not supported by EXPAND.\n