home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 1
/
HamRadio.cdr
/
tech
/
fdraw
/
readme.2
< prev
next >
Wrap
Text File
|
1987-09-29
|
6KB
|
114 lines
README.2 This is the README file from the supplemental
documentation disk.
Refer to README.1 on disk 1 for a description of FLODRAW.
This file contains the following.
1. A list of files on this disk.
2. Notes on using the files on this disk.
3. Instructions for printing the reference manual on this disk.
--------------------- 1. A list of files on this disk -------------------
The following files are included on this disk.
FLODRAW.DOC is the FLODRAW Reference Manual on disk.
FLOCHART.LIB is a library of flowchart symbols. This is the
same library as SYMBOL.LIB on disk 1, except
this library does not contain the flowchart
heading symbol. You may want to design your own
heading symbol and add it to this library.
FLOCHART.PIC is a chart of all the symbols in the FLOCHART
library.
HIPO.LIB is a library of HIPO symbols.
HIPO.PIC is a chart of all the symbols in the HIPO
library.
ELECTRIC.LIB is a library of electrical symbols.
ELECTRIC.PIC is a chart of all the symbols in the ELECTRIC
library.
ORG.LIB is a library of symbols used in organization
charts.
ORG.PIC is a chart of all the symbols in the ORG
library.
MISC.LIB is a library of miscellaneous symbols.
MISC.PIC is a chart of all the symbols in the MISC
library.
LIBRARY.BAT is the batch file used to create and
maintain FLODRAW libraries.
SAMPLE.FLO is a sample flowchart document.
SAMPLE.ELC is a sample electrical diagram.
SAMPLE.FRM is a sample standard form for flowcharts.
SAMPLE.ORG is a sample organization chart.
README.2 you're reading it.
-------------- 2. Notes on using the files on this disk ---------------
All the SAMPLE files and all files ending in .PIC are FLODRAW
document files. You can read and edit these files with FLODRAW. Use this
procedure to read the files.
1. Put the FLODRAW program disk (disk 1) in drive A.
2. Put this disk in drive B.
3. Type FLODRAW B:filename to load the file into FLODRAW.
For example, to read the sample flowchart, type
FLODRAW B:SAMPLE.FLO
All the files ending in .LIB are library files. The library files
contain the symbols you use while editing your documents. Use the
following procedure to try a new library.
1. Put the FLODRAW program disk (disk 1) in drive A.
2. Put a blank formatted data disk in drive B. If you have
already started a data disk, you can use it.
3. Type FLODRAW B:filename to load FLODRAW and read or start
a flowchart document.
4. Remove the program disk from drive A.
5. Put this disk in drive A. FLODRAW will always look for
library files on the default drive.
6. Press ESC to return to the entry screen.
7. Press F9 on the entry screen to get the Load New Library
menu.
8. Enter the name of the library you want to load. For example,
to load the library of organization chart symbols, enter
ORG
9. FLODRAW will load the new library and return you to the
entry screen. Now press F1 to edit your document.
10. Press F10 to try out the new symbols.
The LIBRARY.BAT file is used to combine symbols into libraries or add
symbols to libraries. Refer to the FLODRAW Reference Manual on how to do
this.
----------- 3. Instructions for printing the reference manual. -----------
It's easy to print the FLODRAW Reference Manual.
1. Put this disk in drive A.
2. Turn your printer on, and set the print head an
inch below the top of the paper.
3. At the A> prompt, enter the command
TYPE FLODRAW.DOC
but don't press the carriage return yet.
4. Hold down the Ctrl key while you press the
PrtSc key to toggle the print function on.
5. Now press the carriage return to start printing.
6. The reference manual will scroll down your screen
while it prints. Printing will take about 20
minutes.
7. When the printing stops, hold down the Ctrl key
while you press the PrtSc key to toggle the print
function off.