home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 1
/
HamRadio.cdr
/
misc
/
baycom
/
scc.ini
< prev
next >
Wrap
Text File
|
1990-12-26
|
6KB
|
146 lines
; Must be edited before use.
;
; Initial Set up File SCC.INI for Baycom Version 1.20 DL8MBT / DG3RBU
; ----------------------------------------------------------------------
; (update V1.20 15.11.90)
;
;
; You must edit the parameters below to suit your needs, after you
; have edited and saved this file (SCC.INI) you must run the program
; PARA.EXE This will compile your parameters to a file SCC.PAR this
; will be the parameter file loaded each time you run Baycom.
;
tports 7 ; Available ports (maimum 9, 1 port used for monitor)
buffer 40 ; Size of total AX25 buffer in frames }
mbuffer 10 ; Size of monitor buffer times 330 bytes } Best left
rbuffer 10 ; Size of receive buffer times 330 bytes } as is.
tbuffer 7 ; Size of transmit buffer times 300 bytes }
;
; RS-232 Port Settins
; -------------------
;
rs232 1 ; Can be run on serial ports COM1 or COM2 (Select 1 or 2)
;
; Video-Setup
; -----------
;
d1lines 8 ; Set divide line 2 position
d2lines 20 ; Set divide line 2 position
vadapter 0 ; Video-Type: 0=Automatic, 1=Mono, 2=Color, 3=LCD
vcolumns 80 ; Set how many characters wide shown on screen (Best at 80)
vlines 25 ; How many lines down screen (EGA/VGA only) (Best at 25)
saveports 0 ; What parts of screen to save for next time (I think?)
wwrap 80 ; Automatic wordwrap and carridge return after 80 (Best at 80)
mheader on ; Header monitored text with call route (I think)
german off ; German on/off only with German Keyboard (OFF in UK)
remote on ; Permit remote usage with //command (OS is not permited)
;
;
; Callsign Settings
; -----------------
;
dcall g9xyz ; Callsign for Digipeater
connect test ; Leave at "test" used for quasi-self connect 0)
mycall g9xyz g9xyg-8 ; Set for MYCALL (your callsign)
cnot nocall tnc2c pk232 ; Connect request ignored for callsigns here
;
; Connect is set below, you can edit this when running Baycom
ctext This is your connect text (maximum 80 characters wide)
;
; Layer-2 Parameters
; ------------------
;
mselect 0 ; Monitor 1=QSO 2=MFROM 3=MTO +10=NOT
mcalls g9abc g9zzz ; Monitor-Selected Callsigns
;
frack 20 ; FRACK times 100ms (Timer 1) Frame Acknowledge time
resptime 2 ; RESPONSE times 100ms (Timer 2) Time before responce
linktime 12 ; Inactive-Link-Timer times 10 sec (Timer 3) 12=120 Sec
maxframe 4 ; MAXFRAME set between 1 & 7 (Best at 4)
paclen 256 ; PACLEN 1 to 256 reduce for bad links
retry 25 ; Number of retries (1/4 for connect request)
ipoll 60 ; Set IPoll (Best left at 60)
tinfo 4 ; Info timer, times 100ms (Best left at 4)
tquit 12 ; Quit timer, time waited for data ACK on Quit (Best at 12)
;
;
; Layer 1
; -------
;
dwait 10 ; Timer for digipeat wait time (times 10mS) (Best at 10)
txdelay 20 ; Transmit Delay, 20 for normal - 40 if linear in use
tail 2 ; Tail time for fullduplex use times 10mS (leave at 2)
beacon 0 ; Beacon timer in seconds, 0=No Beacon never set less than 500
badress beacon g9aaa g9xyz ;Beacon address: BEACON <DIGI> <MYCALL>
btext Baycom Version 1.20 (Digicom for the PB) ; Set your beacon text
;
; (upto 80 characters, you may edit when Baycom is running)
;
; Screen Attributes (Colours)
; ---------------------------
;
; Set 0 to 7 use Hex above 7, i.e: 15 = f
;
cselect 0 ; Setting for mono screens (best not to alter)
;
; Set below only for mono display cards
;
sattrib 0 07 ; TX Data Colour
sattrib 1 47 ; TX/RX Status Bar Colour
sattrib 2 c7 ; STOP indicator/Unviewed Data on Port Colour
sattrib 3 07 ; Receive Data text colour
sattrib 4 70 ; Colour for Port Status Bar
sattrib 5 70 ; Colour for unconnected ports
sattrib 6 7f ; Colour for Port Selected (in use)
sattrib 7 07 ; Monitor callsigns colour
sattrib 8 07 ; Monitor information colour
sattrib 9 70 ; Colour to show CONTROL character
;
cselect 10 ; Attributes for LCD with CGA emulation
;
; Set below only for LCD laptops with CGA emulation
;
sattrib 0 0F ; TX Data colour
sattrib 1 78 ; TX/RX Status Bar Colour
sattrib 2 F8 ; STOP indicator/Unviewed Data on Port Colour
sattrib 3 0F ; Receive Data text colour
sattrib 4 7F ; Colour for Port Status Bar
sattrib 5 70 ; Colour for unconnected ports
sattrib 6 0F ; Colour for Port Selected (in use)
sattrib 7 07 ; Monitor callsigns colour
sattrib 8 0F ; Monitor information colour
sattrib 9 78 ; Colour to show CONTROL character
;
cselect 20 ; Attribute for Color Diplay's (CGA,MCGA,EGA & VGA)
;
; Set below only for standard colour display (CGA,MCGA,EGA & VGA)
;
sattrib 0 02 ; TX Data colour
sattrib 1 47 ; TX/RX Status Bar Colour
sattrib 2 c7 ; STOP indicator/Unviewed Data on Port Colour
sattrib 3 07 ; Receive Data text colour
sattrib 4 47 ; Colour for Port Status Bar
sattrib 5 40 ; Colour for unconnected ports
sattrib 6 57 ; Colour for Port Selected (in use)
sattrib 7 03 ; Monitor callsigns colour
sattrib 8 02 ; Monitor information colour
sattrib 9 04 ; Colour to show CONTROL character
;
; ^ Foreground
; ^ Background
;
;
; 0 = Black 8 = Grey
; 1 = Blue 9 = Bright Blue
; 2 = Green A = Bright Green
; 3 = Cyan B = Bright Cyan
; 4 = Red C = Bright Red
; 5 = Magenta D = Bright Magenta
; 6 = Brown E = Yellow
; 7 = White F = Bright White
;
; ^ If these are used for foreground
; in place of 0-7 then that attribute
; will flash.
;