home *** CD-ROM | disk | FTP | other *** search
/ Shareware Gold 1 / The_Golden_ROM_Series_-_Shareware_Gold_Volume_1_Number_11_-_SK_89-301_-_1989.iso / LIB017 / NMBR_PAD.HLP < prev    next >
Text File  |  1986-10-01  |  4KB  |  81 lines

  1.  
  2.                The NUMBER PAD, NUM-LOCK AND SCROLL LOCK TOGGLES
  3.  
  4.  
  5.     The Number Pad on the right of your keyboard is heavily used with your
  6.     cursor control arrow keys, PgUp, PgDn, Home, End, etc.  You can also
  7.     enter ASCII characters by holding down the Alt key and typing their
  8.     decimal values on the Number Pad and then releasing the Alt key (if
  9.     the Graphics Character Toggle is ON).
  10.  
  11.     Since you may always type a number on the Number Pad by holding down
  12.     the Shift key and then pressing the number you want on the pad, we
  13.     decided to disable the standard NumLock toggle.  We found that it was
  14.     too easy to press it by mistake and then you would get a number in
  15.     your text area every time you tried to move the cursor or go to the
  16.     end of a line.
  17.  
  18.  
  19.                               Press the PgDn Key
  20.  
  21.                               THE NumLock TOGGLE
  22.  
  23.     However, if you REALLY want to turn it on, you can, by holding down
  24.     both the Alt and Ctrl keys and then pressing the NumLock key.  An "N"
  25.     will appear on the Command Line in reverse color, the bell will sound,
  26.     and you will be provided with a message stating:
  27.  
  28.               Number Pad Enabled ...  (Press NumLock to disable)
  29.  
  30.     Try it.  Now Press NumLock, and the "N" should disappear.
  31.  
  32.     If you own a "key tronics" keyboard, this feature is of no advantage
  33.     and will not function as you would expect.  You may turn this "NumLock
  34.     Override" feature off by going to the MODIFY DEFAULTS panel (F8-F2)
  35.     selecting the "Toggle Settings" field, and turning the "NumLock
  36.     Override" toggle "off".  (See the HELP file "TOGGLES".)
  37.  
  38.  
  39.                               Press the PgDn Key
  40.  
  41.                         THE Alt KEY AND THE NUMBER PAD
  42.  
  43.     Normally on a PC, you may type any of the 255 ASCII characters by
  44.     holding down the Alt key, typing the decimal value of the character on
  45.     the Number Pad, and then releasing the Alt key.
  46.  
  47.     PC-TYPE+, however, has a filter which does not permit non-standard
  48.     characters to be entered in your text in this fashion.  Consider that
  49.     if you hold down the Alt key by mistake and press an arrow key, you
  50.     will get an unwanted character in your text.
  51.  
  52.     Note: this filter is not active on the Command Line.
  53.  
  54.     Since you can get all the characters easily by pressing AltG to
  55.     select, and then CtrlG to place the character in your text, this PC
  56.     option is not really necessary.  However, if you are used to entering
  57.     characters in this fashion, you can with the help of the Scroll Lock
  58.     Toggle.
  59.                               Press the PgDn Key
  60.  
  61.                             THE Scroll Lock TOGGLE
  62.  
  63.     Make sure your cursor is in the text area and press the Scroll Lock
  64.     key.  You should see a "G" on your Command Line.  The "G" stands for
  65.     Graphic characters, and when it is displayed on the Command Line you
  66.     can enter your characters with the Alt key and the Number Pad.  For
  67.     example, hold down the Alt key, and while holding it down, press the
  68.     2, the 5, and the 1 keys in succession on the Number Pad.  Then
  69.     release the Alt key.  You should get the "√" to appear in your text.
  70.  
  71.     Now press the Scroll Lock key again.  The "G" will disappear from the
  72.     Command Line, and if you repeat the process above, the entry will be
  73.     ignored.
  74.  
  75.     If you want the "G" to be "on" when you enter PC-TYPE+, you may make
  76.     it so by turning the "Scroll Lock" toggle on in the "Toggle Settings"
  77.     sub-screen of the MODIFY DEFAULTS screen.
  78.  
  79.                      Press F4 to Return to the HELP Menu
  80.  
  81.