1001 Communication with printer cannot be established. Please check if printer is connected to the computer.
1002 Data cannot be send to printer. Please check if the printer is on line and connected.
1003 Invalid window handle.
1004 Function with this name does not exist. Please check the function name.
1005 The selected file does not exist.
1006 Printer with this name does not exist. Please check the printer name.
1007 Tools data structure is not initialized. Init must be called before any other function is called.
1008 Error message cannot be retrieved. Please check error ID.
1010 Call to Windows StartDocPrinter has failed!
1011 Call to Windows EndDocPrinter has failed!
1012 There is no data to be sent to printer.
1013 Cannot read data from input file.
10000 Print configuration label
10001 Feed one label
10002 Print object list
10003 Calibrate media
10004 Load factory defaults
10005 Set Kiosk Orientation Horizontal
10006 Set Kiosk Orientation Vertical
10007 Clear Kiosk Presenter
10008 Reset printer
10009 Enter diagnostics mode
10010 Exit diagnostics mode
10011 Send command
10012 Send file
10100 ZPL Files
10101 All Files
10102 TXT Files
20000 The Print Configuration Label command is used to generate a printer configuration label. The printer configuration label contains information about the printer setup, such as sensor type, network ID, ZPL mode, firmware version, and descriptive data in the printer memory.
20001 The Feed One Label command causes the printer to feed one blank label.
20002 The Print Object List command is used to print a label listing bar codes, objects stored in DRAM, or fonts. For bar codes, the list shows the name of the bar code. For fonts, the list shows the name of the font and size. For objects stored in DRAM, the list shows the name of the object, extension, size, and option flags.
20003 The Calibrate command is used to force a label length measurement and adjust the media and ribbon sensor values.
20004 The Default Printer command is used to reload factory settings in the printer. WARNING: Any custom settings in the printer will be lost.
20005 Sets orientation to horizontal.
20006 Sets orientation to vertical.
20007 Clears Kiosk presenter.
20008 The Reset Printer command resets all of the printer s internal software, performs a power-on self-test (POST), clears the buffer and DRAM, and resets communication parameters and default values.
20009 The Enter Diagnostics Mode command initiates Diagnostic Mode, which produces an ASCII printout (using current label length and full width of printer) of all characters received by the printer. This printout includes the ASCII characters, the hexadecimal value, and any communication errors.
20010 The Exit Diagnostics Mode command cancels Diagnostic Mode and returns the printer to normal label printing.
20011 The Send Command is used to send data directly to printer. Enter the text to be sent to the printer in the box below.
20012 The Send File command is used to send a file directly to the printer. Enter filename to be sent to the printer in the box below or click on '...' to browse for a file.
