home *** CD-ROM | disk | FTP | other *** search
/ c64.rulez.org / 2014.05.c64.rulez.org.tar / c64.rulez.org / pub / c64 / other-OS / Dos / 1541v100.arj / CABLE.TXT next >
Text File  |  1996-01-06  |  2KB  |  29 lines
  1. tHE PROGRAM REQUIRES THE FOLLOWING ADAPTER CABLE TO BE CONNECTED BETWEEN YOUR
  2.  
  3. PARALLEL PRINTER PORT (lpt1/lpt2/lpt3) AND A COMMODORE DISK DRIVE (1541/1581)
  4.  
  5.  
  6.  
  7. ibm lpt PORT mALE (SOLDER SIDE):     cbm iec SERIAL PORT mALE (SOLDER SIDE):
  8.  
  9.         ZDDDDD{CBM-B}                              IMMMM_MMMM{CBM-F}
  10.  
  11. sTROBEDDED1{$fe}  {SHIFT-*}DDD{CBM-B}                        IM{CBM-C}         HM{CBM-F}  _____
  12.  
  13.         {CBM-W}      {$fe}14EDDaUTOfEED        dATADDWDD{$fe}5     1{$fe}DDWDDsRQiN  _____
  14.  
  15. (dATA 0){CBM-W} 2{$fe}D{CBM-B}    {CBM-W}                        {SHIFT-@}     6{$fe}DDDDDDWDDDDDDDDDrESET
  16.  
  17.         {CBM-W}    {SHIFT-*}D{$fe}15{CBM-W}(eRROR)          cLOCKDDWDD{$fe}4     2{$fe}DDWDD{CBM-B}gROUND
  18.  
  19.         {CBM-W} 3{$fe}      {CBM-W}  ____                  HM{CBM-F}   3{$fe}    IM{CBM-C} DAD
  20.  
  21.         {CBM-W}      {$fe}16EDDiNIT                    HMMMMXMMMM{CBM-C}
  22.  
  23.         {CBM-W} 4{$fe}      {CBM-W}                           aTNDY
  24.  
  25.         {CBM-W}      {$fe}17EDDsELECTiN  ZDDDDDDDDDDDBDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD{CBM-B}
  26.  
  27.         {CBM-W} 5{$fe}      {CBM-W}            {CBM-W} c64SIGNAL {CBM-W}  ibmSIGNAL       lpt PORT + 2 {CBM-W}
  28.  
  29.         {CBM-W}     Z{$fe}18{CBM-W}            {CBM-W}           {CBM-W}                               {CBM-W}
  30.  
  31.         {CBM-W} 6{$fe}  CDDDEDD{CBM-B}gROUND   {CBM-W}  2 gROUND {CBM-W} 18..25 gROUND                 {CBM-W}
  32.  
  33.         {CBM-W}     C{$fe}19{CBM-W} DAD        {CBM-W}  3 aTN    {CBM-W}      1 sTROBE      BIT 0      {CBM-W}
  34.  
  35.         {CBM-W} 7{$fe}  {CBM-W}   {CBM-W}            {CBM-W}  4 cLOCK  {CBM-W}     14 aUTOfEED    BIT 1      {CBM-W}
  36.  
  37.         {$f7}{$f7}{$f7}{$f7}{$f7}{$f7}{$f7}{$f7}{$f7}{$f7}{$f7}            {CBM-W}  5 dATA   {CBM-W}     17 sELECTiN    BIT 3      {CBM-W}
  38.  
  39.         {CBM-W}     {SHIFT-*}{$fe}25{CBM-W}            {CBM-W}  6 rESET  {CBM-W}     16 iNIT        BIT 2      {CBM-W}
  40.  
  41.         {CBM-W}13{$fe}  ZDDDY            {SHIFT-*}DDDDDDDDDDDADDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY
  42.  
  43.         {SHIFT-*}DDDDDY
  44.  
  45.  
  46.  
  47. iT IS NOT NECESSARY TO WIRE ALL THE GROUND PINS.
  48.  
  49.  
  50.  
  51. tHE CONNECTION BETWEEN THE PINS 2 AND 15 ON THE lpt PORT SIDE IS NECESSARY FOR
  52.  
  53. THE AUTO DETECT ROUTINE. iF YOU DON'T WANT TO CONNECT IT, YOU CAN, BUT YOU MUST
  54.  
  55. FORCE THE PROGRAM TO WORK WITH THE lpt PORT WHERE THE CABLE IS CONNECTED.
  56.  
  57.