In most cases the MSSC will not need the information contained in the S-digit of the country
code 87S. In this situation the sequence of forward-address information sent to the
MSSC should be as for a terminal international call.
Cases may arise where an MSSC requires the S-digit to distinguish between ocean areas,
satellite systems or VHF/UHF vs. satellite. In this situation the sequence of forward-address information should be as for an international transit call, i.e. the sequence
includes the country code 87S.
4.2w S-digitw
It is a matter for the terrestrial subscriber to choose the proper S-digit and the MSSC to be
used will be decided by the outgoing country. (For technical reasons accounting
between Administrations should be performed on the basis of only 87S.)
4.3w Calls from ship earth station (ship-to-shore)w
The desired MSSC is selected at the ship earth station by procedures within the maritime
satellite system. After the dialling tone has been provided to the subscriber, he
will dial a prefix followed by the full international telephone number required, whether
or not the MSSC is located in the required subscriber's country (see also
Recommendation Q.11wquaterw).
The prefix must be suppressed by the MSSC since it is only required for internal routing in the
MSSC.
For calls to subscribers in the MSSC country, the country code should also be suppressed by the
MSSC.
A discriminating digit must be inserted by the MSSC according to Recommendation Q.104.
4.4w Operator servicesw
The desired MSSC is selected at the ship earth station by procedures within the maritime
satellite system. After the dialling tone has been provided to the subscriber, he
will dial a two digit prefix, possibly followed by a 1, 2 or 3 digit country code, to
identify the type of operator required (see Recommendation Q.11wquaterw).
The MSSC could then convert the received dialling information as required for setting up the
terrestrial connection to the operator.
4.5w Special service terminationsw
The desired MSSC is selected at the ship earth station by procedures within the maritime
satellite system. After the dialling tone has been provided to the subscriber, he
will dial a two digit prefix possibly followed by other digits to identify the type of
special service termination required. (See Recommendation Q.11wquaterw.) The MSSC should
3 Fascicle VI.14 - Rec. Q.1101
convert the received dialling information as required for setting up the terrestrial
connection.
Fascicle VI.14 - Rec. Q.1101 4
5 Special requirements related to setting-up and clearing of automatic calls
5.1w Setting-up time for shore originated callsw
The setting-up time for shore originated calls should be as short as possible. If the MSSC has
not been able to establish the connection within a period of 20 seconds after receipt
of all address digits, a congestion indication should be returned.
w Notew - In maritime satellite systems the setting-up time is not controlled by each individual
MSSC but may depend on the overall traffic load in the system and on the assignment
procedure used. For several reasons the setting-up time of the radio path is likely to
be longer than the setting-up time of the subscriber connection in terrestrial
systems.
5.2w Transmission of answer signalw
5.2.1 When the maritime satellite switching centre (MSSC) detects the answer signal from the maritime
satellite system, the MSSC must remove the ringing tone, through-connect the circuit
and return the answer signal as soon as possible to the terrestrial switching centre.
Precautions should be taken at the MSSC to avoid interpreting an interruption of the satellite
link as an answer signal.
5.2.2 For ship originated calls the maritime satellite system should preferably include provisions
for transferring the answer signal to the ship earth station.
5.3w Seizure of a terrestrial circuit from the MSSCw
The maritime satellite switching centre should not seize a terrestrial circuit before each of
the following conditions has been met:
- the satellite channel has been assigned;
- the continuity of the satellite channel has been verified;
- all digits necessary for routing decision by the maritime satellite switching centre have
been received.
5.4w Clear-back conditionsw
5.4.1 The clear-back/re-answer sequence may not apply for shore originated calls, in which case the
satellite link will be released when a clear-back signal is detected at the maritime
satellite switching centre from the satellite link, without waiting for a clear-forward signal from the terrestrial network.
Precautions should be taken either at the MSSC or at the ship earth station in order to avoid
unintentional clearing.
5.4.2 For ship originated calls the normal clear-back procedures should apply (see
Recommendation Q.118).
5.5w Clear-forwardw
When detecting a clear-forward from the satellite link, the MSSC should immediately pass the
clear-forward signal into the terrestrial network.
When detecting a clear-forward from the terrestrial network, the release guard (and clearing)
sequence should follow the procedures defined for the signalling system used.
5.6w Splitting arrangementw
When in-band signalling is used over the satellite link for setting-up and clearing of the
link, a splitting arrangement shall be provided in order to avoid that signalling
tones are passed into the terrestrial network. The splitting time shall be less than
20 ms.
5 Fascicle VI.14 - Rec. Q.1101
In order to protect the maritime satellite system from line signals used on terrestrial
signalling systems, it should be observed that such signalling tones passing through
splitting arrangements in the terrestrial network may have a maximum duration of
50 ms.
6 Audible tones sent by the MSSC
Tones sent by the maritime switching centre (MSSC) should have the following characteristics:
Dial tone: 425 Hz (1.5 seconds maximum, minimum is determined by receipt of
first dial digit)
Ringing tone: 425 Hz (1 second on, 4 seconds off, immediate ringing)
Busy tone: 425 Hz (1/2 second on, 1/2 second off)
Congestion tone: 425 Hz (1/4 second on, 1/4 second off)
Special information tone: as defined in Recommendation Q.35.
w Notew - The dial tone is given as 1.5 seconds pulse in order to avoid subscribers' confusion
due to the two-way transmission delay of 0.5 seconds. If the normal continuous tone
with interruption after the receipt of the first digit was used, the delay would cause
the tone to stay on after entry of the first digit.
7 Control of echo suppressors
Since all calls to and from a ship earth station will include a satellite link, appropriate
actions must be taken to insert an incoming or outgoing half-echo suppressor at the
MSSC or at an international exchange closer to the terrestrial subscriber. The ship
earth station will connect to the satellite link on a 4-wire basis or will be provided
with the equivalent of a half-echo suppressor. In order to reduce the analysis and
control requirements at the MSSC it may prove convenient to carry out all echo suppressor
control at one of the international exchanges rather than at the MSSC. This is most
easily achieved by fitting permanent half-echo suppressors at the ISC end of each MSSC-ISC circuit. In any case the overall echo control requirements are the same as
specified in Recommendation Q.115.
7.1w Terrestrial signalling systems with signals for control of echo suppressorsw
7.1.1w
Ship original callsw
The MSSC should send an echo suppressor indicator informing transit centres or incoming centres
whether or not an incoming half-echo suppressor should be included.
Insertion of an incoming half-echo suppressor will always be requested if the MSSC does not
carry out echo suppressor control.
7.1.2w
Shore originated callsw
The MSSC will decide whether or not to insert an outgoing half-echo suppressor depending on the
received echo suppressor indicator. If echo control is not performed at the MSSC, the
echo suppressor indicator will always inform the MSSC that an outgoing half-echo
suppressor has already been included.
7.2w Terrestrial signalling systems without signals from control of echo suppressorsw
When signals for the control of echo suppressors are not available on the particular
terrestrial route, significant advantage is to be gained by carrying out the echo
suppressor control at the international exchange. In any case the following rules should
be observed:
7.2.1w
Ship originated callsw
a) When the terrestrial connection between the outgoing ISC, (or MSSC) and the incoming ISC
Fascicle VI.14 - Rec. Q.1101 6
(or national incoming switching centre) does not normally require the use
of echo suppressors, the outgoing ISC (or MSSC) should enable (or insert)
an incoming half-echo suppressor associated with the satellite link.
b) When the terrestrial connection between the outgoing ISC (or MSSC) and the incoming ISC
(or national incoming switching centre) normally requires the use of echo
suppressors, the outgoing ISC (or MSSC) should disable (or should not
insert) any half-echo suppressors associated with either the satellite link or
the terrestrial link.
7 Fascicle VI.14 - Rec. Q.1101
7.2.2w
Shore originated callsw
a) When the international connection between the outgoing ISC and the incoming ISC (or MSSC)
does not normally require the use of echo suppressors, the incoming ISC
(or MSSC) should enable (or insert) an outgoing half-echo suppressor
associated with the satellite link.
b) When the international connection between the outgoing ISC and the incoming ISC (or MSSC)
normally requires the use of echo suppressors, the incoming ISC (or MSSC)
should disable (or should not insert) any half-echo suppressors associated
with either the satellite or terrestrial link.
8 Handling of group calls
8.1w Generalw
A group call is a simultaneous call to a given group of ships. Such calls are identified by the
following international number:
87S0X2X3...Xk
where the first digit of the ship station number has the fixed value 0. The remaining digits
determine which group of ships is being addressed.
Facilities for originating group calls from operators either in the MSSC country or another
country may be readily made available by permitting such calls only when the Z digit
is a language digit. Group calls originating from ordinary telephone subscribers
should not be permitted so long as calling line identification is not available.
8.2w Barring at the ISC of originw
In order to avoid setting up of the international chain for unauthorized group calls from
ordinary subscribers, barring of such calls should, as a general rule, be done at the
ISC of origin.
8.3w Barring at the MSSCw
Barring should also be provided at the MSSC in order to reject group call attempts from ships
or from subscribers in countries where barring at the outgoing ISC is not possible.
9 Avoiding two or more satellite links in tandem
9.1w Shore originated callsw
The country code 87S should be analysed at all transit centres where the call may either be
routed on a circuit containing a satellite link or on a circuit not containing a
satellite link. The latter circuit should always be chosen (see Recommendation Q.14).
9.2w Ship originated callsw
If the signalling system provided between the MSSC and the terrestrial network contains signals
which may be used to indicate that one satellite link is included, such signals
should be used.
If the signalling system does not contain such signals, the outgoing ISC should avoid
forwarding the call on an outgoing circuit which includes a satellite link. If,
Fascicle VI.14 - Rec. Q.1101 8
however, the signalling system employed between the outgoing ISC and the next ISC in the
connection contains such signals, the outgoing ISC should insert the required
information. The outgoing ISC could base its procedure upon incoming route identification.
10 Operator assistance for semi-automatic shore originated calls
If code 11/12 assistance facilities are not provided at the MSSC, then arrangements should be
made to intercept such calls at the preceding ISC and route them to an appropriate
operator.
It may be advantageous for Administrations to provide a publicized number (e.g. C12XXXX) for
specialized assistance on calls to the maritime network.
ANNEX A
(to Recommendation Q.1101)
Brief description of the INMARSAT
Standard A system
A.1w Introductionw
This annex describes the signalling in the INMARSAT Standard A system in a multiple Maritime
Satellite Switching Centre (MSSC) configuration, i.e., there is more than one MSSC
serving an ocean region. Automatic call set-up and clearing are illustrated below. For
calls which cannot be completed, the subscriber will receive from the MSSC or the
terrestrial network the proper audible tone which describes the call status (i.e., busy
tone, congestion tone).
A.2w System configurationw
The INMARSAT system is composed as shown in Figure A-1/Q.1101. Only the components required for
interfacing the telephone network are shown. There are additional interfaces similar
to the MSSC for interfacing the telex network and the international public data
network.
The purpose of the MSSC is defined in 2 of the Recommendation.
There is one operating Network Coordination Station (NCS) in each ocean area (there may in
addition be one or more standby NCSs per ocean area). The main functions of the NCS
are as follows.
The ship earth stations can only monitor one calling channel in the shore-to-ship direction.
This calling channel, denoted as the common assignment channel, is transmitted by the
NCS. Each coast earth station transmits its own calling channel which is monitored by
the NCS for relaying signalling messages from a coast earth station to a ship.
The NCS also performs all assignment of telephone channels on a call-by-call basis and monitors
the actual use of the channels for maintenance purposes. The NCS keeps an up-dated
list of all busy ships in the ocean area. If a coast earth station calls a busy ship,
the NCS may thus return a ship busy indication to the calling coast earth station on the
common assignment channel.
The procedures are further described below.
9 Fascicle VI.14 - Rec. Q.1101
A.3w Ship earth station originated callsw
The normal call set-up procedure for automatic call processing from a ship earth station is
shown in Figure A-2/Q.1101. The ship earth station transmits an out-of-band request
message which includes the type of call desired, the identify of the MSSC through which
the terminal wishes to communicate and the identification number of the ship earth
station.
* The NCS of an ocean area will normally be co-located with an MSSC of that area.
FIGURE A-1/Q.1101
Composition of the maritime satellite system
for interconnection with the telephone network
The MSSC upon reacting to the receivedw requestw message, sends aw Request for Assignmentw
message to the Network Coordination Station (NCS). The NCS receiving thew request for
assignmentw message assigns a channel (frequency) and transmits this information in
anw assignmentw message to both the MSSC and the ship earth station. Both the MSSC and
ship earth station receive the wassignmentw message, automatically select the correct
frequency, and initiate a continuity by transmitting a 2600 Hz tone.
When continuity has been established, the MSSC sends a dial tone pulse to the ship earth
station. The ship earth station subscriber then dials in the desired prefix, country
code and national significant number followed by an end-of-selection signal. The
signals are transferred as in band push button signals on the satellite link.
The MSSC proceeds to select a terrestrial trunk and follows the standard signalling sequences
of the signalling system used towards the ISC (Figure A-2/Q.1101). The ringing tone
from the terrestrial network is allowed to pass directly to the ship earth station
subscriber. When the terrestrial party answers the call, the ISC passes the answer signal
to the MSSC and the international connection is established. The answer signal, if
implemented, may then be passed to the ship earth station 1).
A.4w Terrestrial originated callsw
The normal call set-up procedure for automatic call processing from the terrestrial network to
a ship earth station is shown in Figure A-3/Q.1101. The ISC selects a circuit and
sends the seizing signal and the mobile terminal identification digits to the MSSC in
accordance with the procedures used in the terrestrial signalling system. The MSSC then
sends aw request-for-assignmentw message to the NCS containing the ship earth station
identity. The NCS responds by sending anw assignmentw message to both the MSSC and the
ship earth station. The MSSC and the ship earth station activate their carriers and
send a 2600 Hz tone. Upon receipt of the 2600 Hz tone from the ship earth station the
MSSC interprets this as an address complete condition, sends the ringing tone to the
terrestrial network and stops sending 2600 Hz to the ship earth station. When the
operator or subscriber at the ship earth station answers, the ship earth station
discontinues sending its 2600 Hz tone.
The MSSC recognizes the cutting of the 2600 Hz tone as an answer signal from the ship earth
station and begins the answer sequence toward the ISC as shown in Figure A-3/Q.1101.
Fascicle VI.14 - Rec. Q.1101 10
wNotew - If implemented.
FIGURE A-2/Q.1101
Ship earth station originated calls
FIGURE A-3/Q.1101
Terrestrial originated automatic call
11 Fascicle VI.14 - Rec. Q.1101
A.5w Automatic clearing of callsw
Whether a telephone call originated from a ship earth station or from the terrestrial network,
the MSSC, upon receiving a clear-forward signal, will begin to clear the call
independently in each direction.
The MSSC, receiving a 2600 Hz clearing tone from a ship earth station will initiate clearing
toward the terrestrial network in accordance with procedures defined for the
signalling system used between the MSSC and the ISC. This applies to both clear-forward and
clear-back from the ship earth station. Clearing will also be continued in the maritime
satellite system independent of the terrestrial network.
Clearing initiated in the terrestrial network would be recognized by the MSSC receiving the
appropiate clear-back or clear-forward signal. For clear-forward, the MSSC would
continue clearing with normal terrestrial procedures and begin clearing the maritime
satellite circuit. For clear-back from the terrestrial network, normal time-out supervision
will take place and clear-forward will commence either after expiry of time-out or
after receipt of a clear-forward from the ship, whichever happens first.
As examples of clearing sequences, Figure A-4/Q.1101 illustrates the clearing of a ship earth
station originated call and Figure A-5/Q.1101 illustrates the clearing of a call
originated in the terrestrial network. For a terrestrial originated call which has
clearing initiated by the ship earth station, the satellite circuit is cleared after the MSSC
recognizes the stopping of the ship earth station carrier. The terrestrial circuit is
held until the end of release guard sequence as shown in Figure A-5/Q.1101.
SES = Ship earth station
FIGURE A-4/Q.1101
Clearing sequences for ship earth station
originated calls
Fascicle VI.14 - Rec. Q.1101 12
FIGURE A-5/Q.1101
Clearing sequences for terrestrial originated calls
ANNEX B
(to Recommendation Q.1101)
Logic procedures for incoming INMARSAT Standard A
signalling system (ship originated call)
This annex only includes those elements of the Standard A INMARSAT system which have to be
implemented for interworking purposes.
Internal procedures such as those required for setting-up and clearing of the satellite link
are not shown. They are only indicated by task symbols.
Other procedures not shown are:
- interruption control procedures related to the satellite link:
- pre-emption procedures for assigning channels to distress call.
For more details on the first generation INMARSAT Standard A signalling system, see Annex A.
FIGURE B-1/Q.1101
State overview diagrams for incoming INMARSAT Standard A signalling system
FIGURE B-2/Q.1101
Notes to incoming INMARSAT Standard A signalling system
wNote 1w - Includes also translation of prefixes to the appropriate destination number.
FIGURE B-3/Q.1101
(sheet 1 of 2)
Incoming INMARSAT Standard A signalling system
13 Fascicle VI.14 - Rec. Q.1101
wNote 2w - Includes also address translated from any received prefixes.
wNote 3w - If implemented.
FIGURE B-3/Q.1101
(sheet 2 of 2)
Incoming INMARSAT Standard A signalling system
Fascicle VI.14 - Rec. Q.1101 14
ANNEX C
(to Recommendation Q.1101)
Logic procedures for outgoing INMARSAT Standard A
signalling system (shore originated call)
This annex only includes those elements of the INMARSAT Standard A system which have to be
implemented for interworking purposes.
Internal procedures such as those required for setting-up and clearing of the satellite link
are not shown. They are only included by task symbols.
Other procedures not shown are:
- interruption control procedures related to the satellite link;
- pre-emption procedures for assigning channels to distress calls.
For more details on the first generation INMARSAT Standard A signalling system, see Annex A.
FIGURE C-1/Q.1101
State overview diagram for outgoing INMARSAT Standard A signalling system
FIGURE C-2/Q.1101
(Reserved for future notes)
FIGURE C-3/Q.1101
Outgoing INMARSAT Standard A signalling system
15 Fascicle VI.14 - Rec. Q.1101
References
[1] Radio Regulations (Article 1, No. 71), ITU, Geneva, 1982.