home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Jason Aller Floppy Collection
/
177.img
/
WS6#09.LZH
/
TELMERGE.SYS
< prev
next >
Wrap
Text File
|
1990-01-31
|
11KB
|
322 lines
;**************************************
;Editing the TELMERGE.SYS Control file
;**************************************
;
;This file contains control scripts (pretyped command sequences)
;for TelMerge telecommunications. By editing these, you can
;customize TelMerge for your system and the online services you
;use. Your changes take effect when you save this file and start
;TelMerge.
;
;Make your changes to the appropriate section(s) below:
;
; The SYSTEM section governs the default transmission rate,
; communications port, and other settings for your computer
; and modem. TelMerge uses the settings from this section
; unless others are supplied by a SERVICE script or a .TEL
; file.
;
; The MENU section contains the TelMerge Communications Menu--
; the menu of services that appears when you start TelMerge.
; You can edit it to list only the services you use.
;
; The SERVICE section contains log-on scripts for each service
; in the Communications Menu (plus any other scripts you wish
; to store there). Before using a service you must add to its
; script the appropriate phone number, user ID code,
; password, or other information. You get this information
; when you sign up with the service.
;
;The following is a complete list of keywords that can be used in
;the TELMERGE.SYS file. See the TelMerge documentation for
;definitions.
;
;ADDLF ANSW APPEND ATDELA ATTEN AUTOLO BAUD BITS CALL CLS
;DUPLEX ELSE EMUL ENDIF END EXIT FILESE FILETY FIRST FK
;FULLS GOTO GRAPH HANDSH HANGCO HANGUP HARDC HOLD HOST IFNOT
;IF INCLUD INIT2 INIT INTERA LABEL LINEDE LOGFIL LOGGIN LOGON
;MODEM NETWOR NUMBER PARITY PASSW PAUSE PORT POSTMO PREFIX PREMOD
;PRINT PROMPT PROTOC QUIET SAY SEND SERVIC STOPS SUFFIX TERM
;TRY USEDTR USER WAIT
;
;
;*****************
; System Section
;*****************
;
;The following keywords set the basic defaults for your system.
;The current settings work for most systems. If the setting for
;any keyword here doesn't match your system's requirements, replace
;it with one of the other choices listed for that keyword.
;
;Specify the settings that you will use most of the time. If a
;particular service requires different settings, specify them
;in that service's script. Settings in a script override settings
;in the System Section.
;
;NOTE: Text following "{" or ";" is a comment. TelMerge ignores it.
Modem HAYES {Specifies a Hayes Smartmodem.
{Other choices: HAYES2400, DIRECT, ANSWER, ACOUSTIC.
Port COM1 {Indicates that the modem is connected to serial port COM1
{Other choice: COM2.
Baud 1200 {Specifies a baud rate of 1200
{Other choices: 110, 300, 2400, 4800, 9600.
Logging ON {Opens a logfile as soon as you connect to the remote
{service. Both sides of the session are saved in that file.
{Other choice: OFF.
Print YES {Prints incoming information from a session to your
{default printer, alternate printer, or a disk file.
{YES prints to your default printer.
{NO turns printing off.
{COM2 or LPT2 direct printing to a different device.
{<filename> prints to a disk file.
LineDelay 2 {Delays specified number of tenths of a second
{after sending a line of text.
{Current setting is 2/10 second.
Emulate VT100 {Emulates a mainframe terminal.
{Other choices: NONE, VIDTEX (VT52).
Graphic NO {Will not display graphics characters from remote.
{Other choice: YES
;UseDTR YES {Speeds hang up. Modem switch must be set to use
{DTR, data terminal ready.
;Append YES {Adds logging of current session to the end of the
{old logfile instead of starting a new one for each session.
{Other choice: NO.
;Network TYMNET {Specifies the network you are using (if any)
{Other choices: TELENET, UNINET.
;Protocol XMCRC {Specifies a file transfer protocol.
{If you don't include a "Protocol" keyword,
{Xmodem checksum is used.
;***************
; Menu Section
;***************
;
;Edit this section if you want to change the list of services on
;the TelMerge Communications Menu. If you add a service to the
;menu, you must also add a control script to the SERVICE section,
;below.
;
;While editing the Communications Menu, note that each line to
;appear onscreen must begin with the word "Say", and that the
;symbol "|" turns onscreen highlighting on or off. The line
;"Say |NEW| Add new service here" is a template for the next
;service you add. Copy it to the line below, then replace the
;original line with the name of your new service. Be sure to
;delete the semicolon from the line describing your new service.
;or it won't appear onscreen.
Say || |C O M M U N I C A T I O N S M E N U
Say ────────────────────────────────────────────────────────────────────────
Say
Say |CIS| CompuServe Information Service |ESL| EasyLink by Western Union
Say
Say |ITT| ITT Telex and TIMETRAN |MCI| MCI Mail
Say
Say |OAG| Official Airline Guides |ONT| ONTYME Messaging Service
Say
Say |RCA| RCA Telex and TELEXTRA |SOU| The Source Telecomputing
Say
Say |DIR| Direct Connect Mode |ANS| Answer mode
Say
Say |TEL| Another TelMerge User
;Say
;Say |NEW| Add new service here
Say
Say ────────────────────────────────────────────────────────────────────────
Say
Say Enter your selection:
Hold ?3 {Wait for user's selection from keyboard
{3 character maximum
Cls
Goto ! {Go to the Label that matches selection
;******************
; Service Section
;******************
;
;This section contains log-on scripts for the services on the
;Communications Menu. Add the missing information for each service
;to the right of its keywords below, delete any scripts you don't
;want, or write new scripts of your own. The first script, labeled
;"NEW," is a dummy. You can use it as a template for the next
;script you write.
;
;If you have already created a .TEL file for a service, you can use
;WordStar to insert it into this section instead of typing the
;script from scratch. Later, you can delete the .TEL file.
;
;Whenever you add a script, remember to add its label to the
;Communications Menu. You can use a completed script to call a
;service, however, even if it isn't on the menu. Simply type its
;3-character label at the "Enter your selection:" prompt.
;
;You can write scripts to automate much of an online session, for
;example, to send or ask for certain information or to make several
;calls in succession. The following keywords are useful for
;automating calls (see the "TelMerge" tab section of your manual
;for details):
;
;CALL Dials the service now.
;WAIT word Awaits this word from the service after
; logging on.
;SEND word Sends this word (or words) to the service.
;PAUSE secs Waits this number of seconds.
;QUIET secs Waits this number of seconds after remote has
; finished sending.
;FILESEND filename Sends the specified file.
;LOGGING ON or OFF Turns logging on or off at this point in
; session.
;PRINT ON or OFF Turns printing on or off at this point in
; session.
;HANGUP Hangs up phone, gets ready for another call.
;
;
;Here are brief descriptions of the keywords used in the scripts
;below. For more information about these and other keywords, see
;the "TelMerge" tab section of your manual.
;
;ANSWERBACK string Sends your personal ID code in response to a
; telex WHO ARE YOU request.
;BAUD rate Sets the transmission rate for this service.
;END Ignores subsequent commands in this script.
;HOSTID string Issues up to 30 characters as a network's
; internal "phone number" for the service you
; are calling. Example: HOSTID CPS
;INTERACTIVE number Specifies the phone number of a telex real-
; time system.
;LABEL string Characters you will type to start calling this
; service.
;LOGFILE filename Names the file that records an online session.
; Example: LOGFILE MCI.LOG
;LOGGING ON or OFF Turns automatic recording of an online session
; on or off.
;NETWORK name Telephone network through which to contact
; this service. (TYMNET, Telenet, UNINET)
;NUMBER number Phone number to dial.
;PASSWORD string Password required by the service (30
; characters maximum).
;SERVICE string Name of the service you are dialing. Appears
; in status line while you are connected. (32
; characters maximum.)
;USERID string User identification code required by the
; service you are using. (30 characters maximum.)
Label NEW
Service
Number
Logfile
Userid
Password
End
Label CIS
Service CIS
Number
Userid
Password
Logfile CIS.LOG
End
Label ESL
Service ESL
Number
Userid {01EasyLinkID UserName Password
Baud 300
Logfile ESL.LOG
Logging ON
End
Label ITT
Service ITT
Number
Interactive
Answerback
Password
Logfile ITT.LOG
Baud 300
End
Label MCI
Service MCI
Number
Userid
Password
Logfile MCI.LOG
End
Label OAG
Network
Hostid
Service OAG
Number
Userid
Password
Logfile OAG.LOG
Baud 300
End
Label ONT
Network TYMNET
Hostid
Service ONT
Number
Userid
Password
Logfile ONT.LOG
Baud 300
End
Label RCA
Service RCA
Number
Interactive
Answerback
Password
Logfile RCA.LOG
Baud 300
End
Label SOU
Service SOU
Network
Hostid
Number
Userid
Password
Logfile SOU.LOG
End
Label DIR
Modem DIRECT
Service TelMerge
End
Label ANS
Service TELM
Modem ANSWER
End
; Use this to call another TelMerge user.
; The F4 "Send" key will allow you to send
; files to the other user with error checking.
Label TEL
Service TelMerge
Logfile TEL.LOG
Number
End