home *** CD-ROM | disk | FTP | other *** search
/ Jason Aller Floppy Collection / 147.img / MREAD111.ZIP / MEGAREAD.TXT < prev    next >
Text File  |  1990-02-25  |  135KB  |  2,675 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.             
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.                                The MegaMail(tm) Reader
  18.                             Copyright 1990 by Kip Compton
  19.                                  ALL RIGHTS RESERVED
  20.  
  21.  
  22.  
  23.  
  24.  
  25.  
  26.  
  27.                                                                           1
  28.  
  29.           Table of Contents
  30.  
  31.  
  32.                License Agreement . . . . . . . . . . . . . . . . . . .    2
  33.  
  34.                Registering Your MegaMail(tm) Reader  . . . . . . . . .    3
  35.  
  36.                The MegaMail(tm) System . . . . . . . . . . . . . . . .    4
  37.  
  38.                Note to Mouse Users . . . . . . . . . . . . . . . . . .    5
  39.  
  40.                A Note about the "Pick Lists" . . . . . . . . . . . . .    5
  41.  
  42.                Installing the MegaMail(tm) Reader  . . . . . . . . . .    5
  43.  
  44.                The MegaMail(tm) Cycle  . . . . . . . . . . . . . . . .   10
  45.                     How to Start Reading Mail in a Conference  . . . .   15
  46.  
  47.                Reading Mail  . . . . . . . . . . . . . . . . . . . . .   16
  48.                     Help Menu  . . . . . . . . . . . . . . . . . . . .   19
  49.                     Leaving Messages . . . . . . . . . . . . . . . . .   20
  50.                     Tag Lines  . . . . . . . . . . . . . . . . . . . .   21
  51.                     Deleting Messages  . . . . . . . . . . . . . . . .   22
  52.                     Searching  . . . . . . . . . . . . . . . . . . . .   23
  53.                          Using the Alt-F Option  . . . . . . . . . . .   23
  54.                     Printing and Saving Messages . . . . . . . . . . .   25
  55.                     "Reverse" Threading  . . . . . . . . . . . . . . .   25
  56.                     About The Personal Read Flags  . . . . . . . . . .   26
  57.                     Quick Scan . . . . . . . . . . . . . . . . . . . .   26
  58.                     "Another Reader" Function  . . . . . . . . . . . .   28
  59.                     Quoting Functions  . . . . . . . . . . . . . . . .   32
  60.  
  61.                Command Line Parameters . . . . . . . . . . . . . . . .   33
  62.  
  63.                Repairing and Purging Mail  . . . . . . . . . . . . . .   36
  64.  
  65.                Colors  . . . . . . . . . . . . . . . . . . . . . . . .   39
  66.  
  67.                Keyboard Macros . . . . . . . . . . . . . . . . . . . .   40
  68.                     Redefining your Keyboard using Macros  . . . . . .   41
  69.                     The Macro Editor . . . . . . . . . . . . . . . . .   42
  70.  
  71.                Appendix A : Summary of Available Commands  . . . . . .   44
  72.  
  73.                Index . . . . . . . . . . . . . . . . . . . . . . . . .   50
  74.  
  75.  
  76.  
  77.  
  78.  
  79.  
  80.  
  81.                                                                           2
  82.  
  83.  
  84.           License Agreement
  85.  
  86.                The MegaMail(tm) Reader ("The  Software") is COPYRIGHT  1990
  87.                by Kip Compton, ALL RIGHTS RESERVED.
  88.  
  89.                You  may not engage in,  nor permit third  parties to engage
  90.                in, any of the following :
  91.  
  92.                     A)   Making alterations of any kind in the software.
  93.  
  94.                     B)   ATTEMPTING TO DISASSEMBLE,  DECOMPILE, OR  REVERSE
  95.                          ENGINEER THE SOFTWARE OR THE FILES IT GENERATES IN
  96.                          ANY WAY.
  97.  
  98.                     C)   Granting  sub-licenses, lease  or other  rights in
  99.                          the software to others.
  100.  
  101.                The author of the software grants you  a license to use this
  102.                software  as long  as you  meet the  above conditions.   Any
  103.                violation  of  the  above  conditions  will  result  in  the
  104.                termination  of your  license to  use  this software.   Upon
  105.                termination of this  license for any  reason, you must  stop
  106.                using  the software  and destroy  all copies  of it  in your
  107.                possession immediately.   In  addition, the author  reserves
  108.                the right to cancel your license to use this software at any
  109.                time for any reason that he sees fit.
  110.  
  111.                The  author  of  this software  is  not  liable for  damages
  112.                suffered as a  result of  the improper use,  proper use,  or
  113.                inability  to use this software.  This type of disclaimer is
  114.                prohibited by law in  some states, and is therefore  void in
  115.                those states.
  116.  
  117.  
  118.  
  119.  
  120.  
  121.  
  122.  
  123.                                                                           3
  124.  
  125.           Registering Your MegaMail(tm) Reader
  126.  
  127.                The MegaMail(tm) Reader is distributed as "Shareware."  This
  128.                means that the reader is distributed freely to whoever wants
  129.                it, without charge, for a trial period.  After you have used
  130.                the reader for  a reasonable trial period  (2 to 4  weeks is
  131.                normal), you should assess  how much the reader is  worth to
  132.                you.  If the reader is worth something to you and you intend
  133.                to continue using it,  you should register it.   Registering
  134.                the reader ensures that there  will be continued support and
  135.                new versions of the  Reader.  In addition,  registered users
  136.                of the reader are given help before unregistered  users when
  137.                seeking support.
  138.  
  139.                The  MegaMail(tm) Reader  costs  $20 to  register.   A  file
  140.                READER.REG  is included with  the reader.   To register your
  141.                reader, print out  the READER.REG file and fill it in.  Send
  142.                the  completed form, along with  a $20 check  or money order
  143.                made out to Kip Compton, to 
  144.  
  145.                               Kip Compton
  146.                               MegaMail Reader Registrations
  147.                               13509 Fowke Lane
  148.                               Woodbridge, VA 22192
  149.  
  150.                In  a few weeks, you will receive  a disk mailer in the mail
  151.                with  your Registered Reader in  it.  The  latest version of
  152.                the  reader will always be sent.  Your new registered reader
  153.                will  not have  the initial  screen that  is present  on the
  154.                unregistered version.
  155.  
  156.  
  157.  
  158.  
  159.  
  160.  
  161.  
  162.                                                                           4
  163.  
  164.           The MegaMail(tm) System
  165.  
  166.                The MegaMail(tm)  System allows  you to download  and upload
  167.                mail to and from  BBSs.  The MegaMail(tm) Reader  works with
  168.                the  MegaMail(tm) Door to form  a complete and powerful mail
  169.                manipulation system. You can download your mail from any BBS
  170.                using the MegaMail(tm) Door and then use your reader to read
  171.                and  reply to that mail. Your replies are then uploaded back
  172.                to the BBS using the MegaMail(tm) door.
  173.  
  174.                Why  would you  want  to  go to  the  trouble of  using  the
  175.                MegaMail(tm) System? The biggest  advantage of the system is
  176.                the time you  will save on-line. Instead of logging  on to a
  177.                BBS and spending an hour reading mail, you can download your
  178.                mail and upload your  responses in just a few  minutes. This
  179.                convenience is especially desirable  if you do long distance
  180.                calling!
  181.  
  182.                In addition, MegaMail(tm) can  be a blessing if you  like to
  183.                play on-line games -- with MegaMail(tm), you'll have time to
  184.                explore  the BBS  and  participate in  the message  bases as
  185.                well!
  186.  
  187.                Another advantage that  only the MegaMail(tm) System  offers
  188.                is a consistent user interface.  Since the MegaMail(tm) Door
  189.                uses our  exclusive UTI technology, it is  compatible with a
  190.                wide  variety of BBS software.   This allows  you to use the
  191.                MegaMail(tm)  Reader   with  virtually  any   BBS  you  call
  192.                regardless  of the  software that  particular BBS  is using.
  193.                You use the same commands to  read and reply to your mail on
  194.                all  the BBS's you call,  thus saving you  hours of learning
  195.                time.
  196.  
  197.                While  it is marvelous  to have a  consistent interface, the
  198.                MegaMail(tm)   Reader   is   also  powerful,   incorporating
  199.                searching  algorithms  usually  reserved only  for  advanced
  200.                databases.  These sophisticated techniques allow you to view
  201.                your mail in  the particular  manner that you  wish. If  you
  202.                wish,  you can read the  mail on a  conference by conference
  203.                basis,  or subject by subject.   You can  read your personal
  204.                messages first and  then go back  and read  the rest of  the
  205.                mail.  You can  even  read all  of  the mail  from  or to  a
  206.                particular user no matter which  BBS or what conference  the
  207.                message was left in!
  208.  
  209.                The  MegaMail(tm) user  interface  is  very  user  friendly.
  210.                Instead of  complex, remote BBS menus  and cryptic commands,
  211.                you  select  functions from  easy to  use  bar menus.   When
  212.                entering messages,  you use a  full featured screen-oriented
  213.                text editor instead of the usual BBS's cryptic line-oriented
  214.                editor.   The  MegaMail(tm) Reader  even has  built-in mouse
  215.                support for those who prefer to use a mouse!
  216.  
  217.  
  218.  
  219.  
  220.  
  221.  
  222.  
  223.                                                                           5
  224.  
  225.           Note to Mouse Users
  226.  
  227.                The  MegaMail(tm)  reader contains  a consistent  mouse user
  228.                interface for those of you  who prefer to use a mouse.   The
  229.                mouse can be used to select options from either the menus or
  230.                lists, and  is also  available while  editing messages.   In
  231.                addition, the right mouse button  functions as the Esc  key,
  232.                while the left mouse button functions as the ENTER key.
  233.  
  234.                In addition,  many lists (ie,  of conferences or  BBSs) have
  235.                "scroll bars" on  the right  border of the  windows.   These
  236.                scroll  bars can be used  to move quickly  through the lists
  237.                using your mouse.
  238.  
  239.           A Note about the "Pick Lists"
  240.  
  241.                "Pick Lists" are  bar-menu screens that  list items such  as
  242.                BBSs  or conferences.   Whenever  you are selecting  an item
  243.                from one of  these lists,  you can search  for a  particular
  244.                item by  typing the first  few letters of  the item  you are
  245.                searching for.  For  example, if you were searching  for the
  246.                "Unix" conference from a long list of conferences, you could
  247.                type UNI and it would probably be found.  Note  that you can
  248.                continue  to add letters until the actually item you want is
  249.                highlighted.  As you type,  matching letters will appear  in
  250.                the lower left hand corner of the listing.
  251.  
  252.           Installing the MegaMail(tm) Reader
  253.  
  254.                Unzip the MegaMail(tm) reader  .ZIP file into a subdirectory
  255.                that you  have created for  your reader.   It may  be called
  256.                anything  that  you wish.   The  zip  file will  contain the
  257.                following files:
  258.  
  259.                          MEGAREAD.EXE
  260.                          MEGAREAD.DOC
  261.                          READER.REG
  262.  
  263.                (additional  files may  be  included;  see  PACKING.LST  for
  264.                details)
  265.  
  266.                Other programs that you will need to use this reader:
  267.  
  268.                          PKZIP.EXE
  269.                          PKUNZIP.EXE
  270.                          ZMODEM Communication Protocol
  271.  
  272.                ZMODEM is necessary because the MegaMail(tm) Door of the BBS
  273.                that  you will be calling only handles ZMODEM file transfers
  274.                at this time.
  275.  
  276.  
  277.  
  278.  
  279.  
  280.  
  281.  
  282.                                                                           6
  283.  
  284.                Execute MEGAREAD.EXE.  The first thing you will see is:
  285.  
  286.                +=========================================================+
  287.                | CONFIG.MGA not Found - Creating New Configuration File. |
  288.                +=========================================================+
  289.  
  290.                The reader  will automatically create  a configuration  file
  291.                and enter the configuration menu show below.  
  292.  
  293.                +===========Change Configuration=====================+
  294.                | Upload Dir             :                           |
  295.                | Download Dir           :                           |
  296.                | Work Dir               : C:\MEGA\WORK              |
  297.                | PKZIP Path             : C:\ZZZ\PKZIP.EXE          |
  298.                | PKUNZIP Path           : C:\ZZZ\PKUNZIP.EXE        |
  299.                | Exploding Windows      : YES                       |
  300.                | "Noisy" Windows        : NO                        |
  301.                | Your Name              :                           |
  302.                | Quoting Prefix         : $I>                       |
  303.                | Delete Default         : NO                        |
  304.                | Auto UnRead Scan       : NO                        |
  305.                | Personal Beeper        : YES                       |
  306.                | Door Text in Message   : NO                        |
  307.                | New Msgs Marked as Read: YES                       |
  308.                | Move after Reply       : NO                        |
  309.                | Auto Indent Mode       : NO                        |
  310.                | Editor Right Margin    : 72                        |
  311.                +====================================================+
  312.  
  313.  
  314.                Each  option is configurable for your particular setup.  You
  315.                may  choose the option you  wish to configure  by moving the
  316.                highlight bar, using  the up  and down arrow  keys, to  that
  317.                option.  Then press the ENTER key to change it.
  318.  
  319.                Note that the only fields that must be  filled in for proper
  320.                operation  are  the  paths  to PKZIP  and  PKUNZIP  and  the
  321.                location  of  the  work,  upload and  download  directories.
  322.                Since the reader will automatically find the path for PKZIP,
  323.                PKUNZIP  and your work  Directory, the only  fields that you
  324.                must configure  yourself are the upload  and download paths.
  325.                Many of the options in the configuration are there simply to
  326.                allow you to customize  the reader, and you can  always come
  327.                back later to alter any of these options.
  328.  
  329.                The  upload   and  download  directories  may  be  different
  330.                directories or  the same directory.   The download directory
  331.                specifies the directory where the reader will look  in order
  332.                to find the  file you downloaded from the  MegaMail(tm) Door
  333.                on  the BBS  you  called.    The  upload  directory  is  the
  334.                directory where the reader  will put the file that  you will
  335.                upload to  the MegaMail(tm) door.   These directories should
  336.  
  337.  
  338.  
  339.  
  340.  
  341.  
  342.  
  343.                                                                           7
  344.  
  345.                be  configured   to  be  the  same   directories  that  your
  346.                communications program looks for a file to upload and places
  347.                a downloaded file. If you're not sure what these directories
  348.                are, you  should probably  set them to  be the  subdirectory
  349.                where your communications program is located.
  350.  
  351.                Exploding windows  are windows which  "explode" open instead
  352.                of just  appearing.   "Noisy" Windows are  exploding windows
  353.                that make  a noise as  they explode.  Both  of these options
  354.                are  simply personal preference, and you may wish to try out
  355.                different combinations to see  what you like best.   To turn
  356.                these features on or  off, move the bar  to that option  and
  357.                press the enter key. When you press the enter key, the value
  358.                will change.
  359.  
  360.                The  quoting prefix  is the  character(s) that  will precede
  361.                each line of quoted material.  Quoting allows you to copy or
  362.                cite text  from prior  messages when  you  are entering  new
  363.                ones.  If you are  not sure about this option, leave  it set
  364.                to the  default and you  can come back later  and change it.
  365.                You  should not  make your  quoting prefix  more than  a few
  366.                characters. If  your quoting  prefix is too  long, you  will
  367.                lose  characters at the end of each  line of text you quote.
  368.                If you  would like to  have the  initials of the  person who
  369.                wrote the text you are quoting to be  in your prefix, simply
  370.                put  $I  (dollar-sign  upper  case  I)  where  you  want the
  371.                initials to  appear. The  reader will  automatically replace
  372.                the $I with the initials when you quote text.
  373.  
  374.                The  reader can be configured to  automatically start in the
  375.                Unread  Scan mode. If turned on,  the reader will start in a
  376.                scan  mode showing  only those  messages that  you  have not
  377.                read.   (See  the section  on Searching  for details.)  This
  378.                option is a matter  of personal taste, and as you can change
  379.                it later you don't need to worry about it for now.
  380.  
  381.                Delete Default  defines whether  the default when  you press
  382.                Alt-K (kill  a message) is  "Yes" - delete  or "No" -  don't
  383.                delete. Beginning  users will probably want  this default to
  384.                be  set at No, thereby not allowing message deletion just by
  385.                pressing the  Enter  key  and saving  you  from  deleting  a
  386.                message by mistake.  More  advanced users will probably want
  387.                this option  to be  yes as this  allows you  to more  easily
  388.                delete messages.  This option is a matter of personal taste,
  389.                and again you can change it at any time.
  390.  
  391.                The Personal Beeper option beeps when a message addressed to
  392.                you is shown.  Many people like this as it  "marks" messages
  393.                addressed  to  them  and  aids in  quickly  reading  through
  394.                hundreds of messages without missing any addressed to them.
  395.  
  396.  
  397.  
  398.  
  399.  
  400.  
  401.  
  402.                                                                           8
  403.  
  404.                The  reader also has a "door text  in message" option.  Each
  405.                time you use  the MegaMail(tm)  Door, the door  sends you  a
  406.                listing of what it  did, along with any warnings  about what
  407.                didn't get  done.  If this option  is turned on, the listing
  408.                from  the door is placed  into a regular  message instead of
  409.                being displayed when mail is imported into the reader.
  410.  
  411.                The "New  Messages Marked  as Read" option  controls whether
  412.                messages that you enter in the reader are marked  "Y" or "N"
  413.                in  their  Personal Read  flag field.    This allows  you to
  414.                control whether  you will  normally see the  messages, since
  415.                you will normally be in "unread mail scan" mode.
  416.  
  417.                The "Move  after Reply"  option controls whether  the reader
  418.                automatically moves forward after you reply to a message.
  419.  
  420.                The "Auto  Indent Mode"  option controls whether  the editor
  421.                starts in  auto-indent mode when you  are entering messages.
  422.                This option only controls whether auto-indent  mode defaults
  423.                to on; you can always use Control-O,I to toggle it.
  424.  
  425.                The "Editor Right Margin" option allows you to control where
  426.                the editor "word-wraps" your text.  You may want to consider
  427.                setting  this  value to  less than  72  so that  when people
  428.                "quote" your text less of the text is lost.
  429.  
  430.                The reader will  automatically fill  in the path  to a  work
  431.                directory  and the location of PKZIP and PKUNZIP.  Note that
  432.                if you  have a  large RAM  disk available,  you may  want to
  433.                specify  that RAM  disk as  the work  directory.   This will
  434.                increase the speed  when importing  and exporting  messages.
  435.                You may change any of these paths by moving the  bar to that
  436.                location and pressing the Enter key.  Type in your corrected
  437.                information and press ESC.
  438.  
  439.  
  440.  
  441.  
  442.  
  443.  
  444.  
  445.                                                                           9
  446.  
  447.                A completed configuration might look something like this:
  448.  
  449.                +===========Change Configuration=====================+
  450.                | Upload Dir             : C:\TELIX                  |
  451.                | Download Dir           : C:\TELIX                  |
  452.                | Work Dir               : C:\MEGA\WORK              |
  453.                | PKZIP Path             : C:\ZZZ\PKZIP.EXE          |
  454.                | PKUNZIP Path           : C:\ZZZ\PKUNZIP.EXE        |
  455.                | Exploding Windows      : NO                        |
  456.                | "Noisy" Windows        : NO                        |
  457.                | Your Name              : KIP COMPTON               |
  458.                | Quoting Prefix         : $I>                       |
  459.                | Delete Default         : NO                        |
  460.                | Auto UnRead Scan       : YES                       |
  461.                | Personal Beeper        : NO                        |
  462.                | Door Text in Message   : NO                        |
  463.                | New Msgs Marked as Read: YES                       |
  464.                | Move after Reply       : NO                        |
  465.                | Auto Indent Mode       : YES                       |
  466.                | Editor Right Margin    : 65                        |
  467.                +====================================================+
  468.  
  469.  
  470.  
  471.  
  472.  
  473.  
  474.  
  475.                                                                          10
  476.  
  477.           The MegaMail(tm) Cycle
  478.  
  479.                Using  the MegaMail(tm) system consists of  a cycle.  First,
  480.                you export any mail that you have in your reader, along with
  481.                instructions  for  the  MegaMail(tm)  door  that  have  been
  482.                automatically generated by the  reader. This is accomplished
  483.                using  the reader's export  function.   Then, call  the bbs,
  484.                open  the MegaMail(tm)  door, and upload  the file  you just
  485.                generated using the reader's  export option.  When the  door
  486.                prompts you to  do so,  download the file  generated by  the
  487.                door.  After you log off the bbs, execute your reader again,
  488.                this  time using the Import option in  order to bring in the
  489.                mail you  just  downloaded.   After  reading your  mail  and
  490.                replying to the various  messages you are ready to  call the
  491.                BBS again and repeat the cycle.
  492.  
  493.                To set up  your reader to exchange  mail for the  first time
  494.                with a BBS,  move the highlighted bar to the  BBS option and
  495.                press Enter. You will see the following menu:
  496.  
  497.                     +===============================+
  498.                     |BBS  Read  Utilities           |
  499.                     +=+=======+=====================+
  500.                       | Export|
  501.                       | Import|
  502.                       | Add   |
  503.                       | Delete|
  504.                       | Quit  |
  505.                       +-------+
  506.  
  507.                You need to tell the reader the ID of the new bbs.  Move the
  508.                bar to Add and press Enter.  You will see:
  509.  
  510.  
  511.                     +===============Add a BBS===============+
  512.                     |                                       |
  513.                     |                                       |
  514.                     |    ID Of BBS to Add :                 |
  515.                     |                                       |
  516.                     |                                       |
  517.                     +=======================================+
  518.  
  519.                You must know the ID (a word of 1-8 letters) of the BBS that
  520.                you want to receive mail from.  Sysops usually will use some
  521.                form of their  BBS name but you MUST have  the exact ID used
  522.                on the BBS. If you're  not sure of the ID for a BBS, leave a
  523.                message  for the Sysop and he or  she should be able to tell
  524.                you.  Once you know  the ID, type it in and press  the Enter
  525.                key.
  526.  
  527.                After you  have added  the ID,  you are  ready to  prepare a
  528.                packet  for upload to the MegaMail(tm) door on the BBS using
  529.  
  530.  
  531.  
  532.  
  533.  
  534.  
  535.  
  536.                                                                          11
  537.  
  538.                the Export option.   Move  the highlight bar  to Export  and
  539.                press Enter.
  540.  
  541.                You will see the following:
  542.  
  543.  
  544.                      +================Select BBS========================+
  545.                      |     CONNECT                                      |
  546.                      +==================================================+
  547.  
  548.                (Note that all the id's  that you have added will  be listed
  549.                but no id is there UNLESS you added it.)
  550.  
  551.                Move the  bar to the BBS  you wish to call  and press Enter.
  552.                You will be informed that:
  553.  
  554.                           +===============Status Window==========+
  555.                           |No Conference Information Available.  |
  556.                           +======================================+
  557.  
  558.                There  is no  conference  information available  because you
  559.                have not yet called the BBS.  You need to create a packet to
  560.                send  to the BBS to register yourself  for the first time in
  561.                the MegaMail(tm) door.   The reader will begin to  prepare a
  562.                packet for you to upload to the BBS.  First you will be told
  563.                that the reader is preparing a packet and then you  will see
  564.                something like this:
  565.  
  566.                +=====================PKZIP.EXE============================+
  567.                |                                                          |
  568.                |PKZIP(tm)FAST! Create/Update Utility Version 1.02         |
  569.                |Copyright 1989 PKWARE Inc. All Rights Reserved.           |
  570.                |                                                          |
  571.                |Updating:  C:/GT1400/CONNECT.UL                           |
  572.                |Updating: INSTRUCT      storing   ( 0%), done.            |
  573.                |Updating: CONNECT.UML   storing   ( 0%), done.            |
  574.                |                                                          |
  575.                |                                                          |
  576.                +==========================================================+
  577.  
  578.                This  packet  contains  instructions  for the  BBS  you  are
  579.                calling  and   whatever  messages  you   might  have   added
  580.                (initially none of course).
  581.  
  582.                Now it is time  to call the BBS  and enter the  MegaMail(tm)
  583.                door.   You  will  be prompted  to  upload a  packet  called
  584.                BBSID.UL and then  be prompted to  download a packet  called
  585.                BBSID.UL where BBSID  = the code name or ID  of the BBS that
  586.                you just called.
  587.  
  588.                After you have uploaded your BBSID.UL file, the door will do
  589.                some work and then  prompt you to download the  new BBSID.DL
  590.  
  591.  
  592.  
  593.  
  594.  
  595.  
  596.  
  597.                                                                          12
  598.  
  599.                that  it created.  After you download  the file, you will be
  600.                returned to the BBS, where you can log off as usual.
  601.  
  602.                Now that you have downloaded the conference information from
  603.                the door, you must "import" it into your reader.
  604.  
  605.                Run  the  reader  and  choose  BBS  option   by  moving  the
  606.                highlighted small bar to the words BBS and pressing ENTER.
  607.  
  608.                          +================================+
  609.                          | BBS  Read  Utilities           |
  610.                          +=+========+=====================+
  611.                            | Export |
  612.                            | Import |
  613.                            | Add    |
  614.                            | Delete |
  615.                            | Quit   |
  616.                            +========+
  617.  
  618.  
  619.  
  620.                Move the  bar to the area  that says Import  and press ENTER
  621.                again.
  622.  
  623.  
  624.  
  625.  
  626.  
  627.  
  628.  
  629.                                                                          13
  630.  
  631.                You will see something similar to this:
  632.  
  633.                +===================Select BBS to Import==================+
  634.                |CONNECT                                                  |
  635.                +=========================================================+
  636.  
  637.                (Note that all bbs's with  downloaded packets waiting to  be
  638.                imported will be listed)
  639.  
  640.                Choose the  ID of  the board that  you have  just called  by
  641.                moving  the  highlighted  bar  to  that  board's  BBSID  and
  642.                pressing Enter.  You will see the following messages:
  643.  
  644.  
  645.           +Messages From Door (Press Esc When Done, PgDn & PgUp to Scroll)+
  646.           |                                                               |
  647.           |                                                               |
  648.           | MegaMail(tm)(tm) Door Version 1.00                            |
  649.           | (C) Copyright 1990 by Kip Compton, ALL RIGHTS RESERVED.       |
  650.           |                                                               |
  651.           | Session of 01/27/90 at 09:17.                                 |
  652.           |                                                               |
  653.           |                                                               |
  654.           | Warning : No instructions for mail extraction received.       |
  655.           |                                                               |
  656.           |                                                               |
  657.           |                                                               |
  658.           |                                                               |
  659.           +===============================================================+
  660.  
  661.                This is the message from the door.  It shows what version of
  662.                the door the  system that you called is  using, the date and
  663.                time  of the  session, and  what mail  you have  downloaded.
  664.                Occasionally, there will be  other information from the door
  665.                here  as well.   Note  that if  you have  the "door  text in
  666.                message"  option turned on, you will not be shown this text,
  667.                for it will be placed in a regular message that you can read
  668.                along with the rest of your mail.
  669.  
  670.                Because this was the first time that you called the BBS, you
  671.                did not receive  any mail  from the  BBS.   Even though  you
  672.                didn't receive  any messages,  your reader  now has  all the
  673.                conference information from the  BBS.  Each time you  call a
  674.                BBS and exchange  message files with  the door, your  reader
  675.                updates  the conference  information for  that BBS  with the
  676.                information that is sent to the reader during that session.
  677.  
  678.                Once  your reader  has the  conference information,  you can
  679.                request actual  mail for the conferences  you are interested
  680.                in  reading.  The first time you  call any BBS, you will not
  681.                obtain actual messages  but only the  conference information
  682.                for  that BBS.  After  your first call,  however, the reader
  683.  
  684.  
  685.  
  686.  
  687.  
  688.  
  689.  
  690.                                                                          14
  691.  
  692.                retains and automatically updates all conference information
  693.                as it is received in each mail packet.
  694.  
  695.                Return  to the  BBS  Menu  and  choose  Export.    Pick  the
  696.                appropriate  ID of the board you are working with.  You will
  697.                now see a list of conferences that this board carries:
  698.  
  699.  
  700.                +==Select Conferences To Change, Press Esc When Done.===+
  701.                |MAIN            : No Mail                              |
  702.                |SYSOP           : No Mail                              |
  703.                |HST             : No Mail                              |
  704.                |SOFTWARE        : No Mail                              |
  705.                |TECH            : No Mail                              |
  706.                |SPORTS          : No Mail                              |
  707.                |MEDICAL         : No Mail                              |
  708.                |COMM            : No Mail                              |
  709.                |DEBATE          : No Mail                              |
  710.                +=======================================================+
  711.  
  712.                Note that initially  you are not set up  to receive any mail
  713.                in any of the conferences.  To receive mail in a conference,
  714.                move the highlight  bar to the conference you are interested
  715.                in and press the Enter key.  You will see:
  716.  
  717.  
  718.                     +=================MAIN==================+
  719.                     |No Mail                                |
  720.                     |All New Mail                           |
  721.                     |Your New Mail                          |
  722.                     |Last x Messages.                       |
  723.                     |Your Mail from Last x Messages.        |
  724.                     +=======================================+
  725.  
  726.                Choose the option  that you  wish to have  for your  message
  727.                gathering.   Remember  that the  first time  you call  a BBS
  728.                there  might be hundreds of messages that you have not read,
  729.                so  that choosing All new  mail might result  in quite large
  730.                download packets.
  731.  
  732.                If you choose Last X messages, included in that total number
  733.                might be erased messages or  private messages to others that
  734.                you will not receive in your packet.  You might receive much
  735.                less than  X messages because of this.  If you choose either
  736.                of  the Your  Mail  options  you  will  receive  only  those
  737.                messages addressed to you.
  738.  
  739.                Your reader  will automatically  store your  conference mail
  740.                preferences. The next time  you export, you will be  shown a
  741.                listing of the conferences, but they will then be configured
  742.                just as they were the last  time you called.  Thus, once you
  743.                set  up your conferences, you do not need to change anything
  744.  
  745.  
  746.  
  747.  
  748.  
  749.  
  750.  
  751.                                                                          15
  752.  
  753.                on this menu again  unless you add, or delete  a conference,
  754.                or change your mail preferences in a conference.
  755.  
  756.                When you are done setting up all the conferences you wish to
  757.                receive  mail in, press Esc.  You  will be asked if you want
  758.                to  export now.  You should  reply "Yes."   The  reader will
  759.                create a BBSID.UL file for you  to upload to the reader, but
  760.                this time, the BBS.UL file will contain instructions for the
  761.                door, telling it  what mail  you want to  download in  which
  762.                conference.   If  you want  to change  your conference  mail
  763.                preferences without  exporting, you  can do so  by selecting
  764.                Export and then answering "No" to the "Export Now" question.
  765.  
  766.                Note:     When  you export,  new  messages and  replies from
  767.                          your reader  are extracted from the  reader's mail
  768.                          files  and placed  in  the BBSID.UL  file that  is
  769.                          uploaded to the MegaMail(tm)  door.  If you export
  770.                          again  or delete  the  BBSID.UL  file  BEFORE  you
  771.                          upload that packet to the MegaMail(tm)  door, your
  772.                          new messages and replies  will be lost.   You must
  773.                          only run EXPORT when you are ready to call the BBS
  774.                          and exchange your mail via the MegaMail(tm) door.
  775.  
  776.           How to Start Reading Mail in a Conference
  777.  
  778.                When you first start reading mail in a conference, there may
  779.                be  hundreds  or  even   thousands  of  messages  available.
  780.                Obviously, you normally do not want to download thousands of
  781.                messages.    However, it  is often  very  helpful to  have a
  782.                "database" of  messages in a  given conference when  you are
  783.                reading mail  -- that way  you can  look back  and see  what
  784.                people are talking  about.  The  MegaMail(tm) Reader has  an
  785.                option designed just for this situation: the Last x Messages
  786.                option.    You  may  have  noticed  this   option  when  you
  787.                configured your conferences earlier.  To use this option  to
  788.                start reading mail  in a  conference, just select  it.   You
  789.                will then be  asked how many  messages back you want  to go.
  790.                Decide how many messages you want to have in your reader for
  791.                this  conference and  type  in that  number.   A  reasonable
  792.                amount is 25 or 50.  Then, you will  be asked if you wish to
  793.                reset your last read  pointer.  You should say "yes".   This
  794.                will set your last read pointer so that you  can start using
  795.                the  All  New Mail  option.    The  next time  you  use  the
  796.                MegaMail(tm)  door, you  will  get some  messages from  that
  797.                conference and  then your last read pointer will be updated.
  798.                You  should be  sure  that  you go  and  change  the Last  x
  799.                Messages  to  All  New  Mail  before  you  export  again  --
  800.                otherwise you'll get the last 50 messages again.
  801.  
  802.  
  803.  
  804.  
  805.  
  806.  
  807.  
  808.                                                                          16
  809.  
  810.           Reading Mail
  811.  
  812.                When you select the Read option from the Main Menu, you will
  813.                be shown the first message in the reader:
  814.  
  815.   +=========================================================================+ 
  816.   |                                                        Level: 1         |
  817.   |BBS: CONNECT       Conference: SysOp                 Imported:  1/18/1990| 
  818.   |                                                                         | 
  819.   |  To: ALL                              Number: 13957     Date:  1/05/1990| 
  820.   |From: JOHN WHITE                    Reference: 0         Time:  4:37 pm  | 
  821.   |Subj: HD MENU                        Security: PUBLIC    Read: N         | 
  822.   |  Echo Flag:Y                                   Personal Read: N         |
  823.   +=========================================================================+
  824.   +=========================================================================+ 
  825.   |                                                                         | 
  826.   |I would appreciate any help I can get to find the authors of HDMENU      | 
  827.   |this was written by VAI Financial Software in Honolulu,Hi. The version I | 
  828.   |have is 2.22 written in 1987. This is the best menuing program I have    | 
  829.   |found. Thanks                                                            | 
  830.   |                                                                         | 
  831.   |PCRelay:THEPIER ->                                                       | 
  832.   |4.10ß9             PIER 22 BBS - Hampton, Va. (804)865-6848 19.2         | 
  833.   |                                                                         | 
  834.   |                                                                         | 
  835.   |                                                                         | 
  836.   |                                                                         | 
  837.   |                                                                         |
  838.   +=========================================================================+
  839.  
  840.  
  841.                As  you can see, the  screen is divided  into two "windows."
  842.                The top  window contains the  message header.   This message
  843.                header contains such important  information as who wrote the
  844.                message, who the message is sent to, and what the subject of
  845.                the message  is.   Here is  a summary of  the fields  in the
  846.                MegaMail(tm) message header:
  847.  
  848.                     BBS :          This  field is  the ID  of the  BBS from
  849.                                    which this message was downloaded.
  850.  
  851.                     Conference :   This field is the name of the conference
  852.                                    or   message   area   from  which   this
  853.                                    particular message was downloaded.
  854.  
  855.                     Level :        Level  that  the  reader   is  currently
  856.                                    accessing.    As   you  open   "another"
  857.                                    readers, the level  will increase by one
  858.                                    for  each  reader  you  have  open. (See
  859.                                    below for more details)
  860.  
  861.  
  862.  
  863.  
  864.  
  865.  
  866.  
  867.                                                                          17
  868.  
  869.                     Imported :     This  field is  the date  on which  this
  870.                                    message   was    "imported"   into   the
  871.                                    MegaMail(tm) Reader.
  872.  
  873.                     To :           This  field contains  the  name  of  the
  874.                                    person to whom the message is addressed.
  875.                                    It will contain "YOU" if the message  is
  876.                                    addressed to you.
  877.  
  878.                     From :         This  field  contains  the  name  of the
  879.                                    person who wrote the message.
  880.  
  881.                     Subj :         This field contains the "subject" of the
  882.                                    message.
  883.  
  884.                     Number :       This  field contains  the number  of the
  885.                                    message on the  BBS.  New messages  that
  886.                                    you  leave  in   the  reader  will  have
  887.                                    "(NEW)" listed as their message numbers.
  888.  
  889.                     Reference :    This  field contains  the number  of the
  890.                                    message   that   this   message  is   in
  891.                                    reference to.  If this message is not in
  892.                                    reference to another message, this field
  893.                                    will contain a 0.
  894.  
  895.                     Security :     This field contains  the security of the
  896.                                    message,   either  PUBLIC   or  PRIVATE.
  897.                                    PUBLIC  messages are intended to be read
  898.                                    by everyone, while PRIVATE  messages are
  899.                                    intended to be  read only by the  person
  900.                                    to  whom the  message is  addressed, the
  901.                                    person  who wrote  the message,  and any
  902.                                    SysOps who are allowed to read the mail.
  903.                                    You  should  note   that  there  is   no
  904.                                    guarantee that PRIVATE  mail will not be
  905.                                    read by others.
  906.  
  907.                     Date :         This  field contains  the date  on which
  908.                                    the message was written.
  909.  
  910.                     Time :         This  field contains  the time  at which
  911.                                    the message was written.
  912.  
  913.  
  914.                     Read :         This field contains the read  field from
  915.                                    the  BBS.   If the  person has  read the
  916.                                    message,  it  will  say  "Y".    If  the
  917.                                    message has  not been read,  it will say
  918.                                    "N."
  919.  
  920.  
  921.  
  922.  
  923.  
  924.  
  925.  
  926.                                                                          18
  927.  
  928.                     Personal Read: This  field  indicates whether  YOU have
  929.                                    read  this message  or not.   This  is a
  930.                                    very powerful field,  because it  allows
  931.                                    you to search for mail that you have not
  932.                                    yet read.
  933.  
  934.                     Echo Flag:     This  flag, which  is supported  by some
  935.                                    BBS   software,   indicates  whether   a
  936.                                    message  should be  "echoed" out  onto a
  937.                                    BBS network.   For this option to  work,
  938.                                    the BBS  must be running version 1.10 or
  939.                                    later  of  the  MegaMail Door,  and,  in
  940.                                    addition, it must be  running a UTI that
  941.                                    supports the echo flag.  You should  not
  942.                                    post a message that you definitely don't
  943.                                    want  echoed using the  reader until you
  944.                                    are sure that  the echo flag is  working
  945.                                    properly on that particular BBS.
  946.  
  947.                It  is important  for you  to understand  the fields  in the
  948.                message header because not only do they appear on all of the
  949.                messages you read  using MegaMail(tm), but you can  use them
  950.                to search for specific messages.
  951.  
  952.  
  953.  
  954.  
  955.  
  956.  
  957.  
  958.                                                                          19
  959.  
  960.           Help Menu
  961.  
  962.                One of the unique features of the MegaMail(tm) Reader is the
  963.                help menu.  To display the help menu, type F1, or press both
  964.                buttons on your mouse at the same time.  You will see:
  965.  
  966.   +=========================================================================+ 
  967.   |                                                        Level: 1         | 
  968.   |BBS: CONNECT         Conference: SysOp               Imported:  1/18/1990|
  969.   |+===========================+                                            | 
  970.   || Next        (Right Arrow) |          Number: 13957     Date:  1/05/1990| 
  971.   || Prev        (Left Arrow)  |       Reference: 0         Time:  4:37 pm  | 
  972.   || Reply       (Alt-R)       |        Security: PUBLIC    Read: N         | 
  973.   || Enter       (Alt-E)       |                   Personal Read: N         | 
  974.   +| Quick Scan  (Alt-Q)       |============================================+ 
  975.   +| Find        (Alt-F)       |============================================+ 
  976.   || Clear       (Alt-C)       |                                            | 
  977.   || Unread      (Alt-U)       | can get to find the authors of HDMENU      | 
  978.   || Yours       (Alt-Y)       |cial Software in Honolulu,Hi. The version I | 
  979.   || Kill        (Alt-K)       | This is the best menuing program I have    | 
  980.   || Save        (Alt-S)       |                                            | 
  981.   || Another     (Alt-A)       |                                            | 
  982.   || What        (Alt-W)       |m)                                          | 
  983.   || eXit        (Alt-X)       |S - Hampton, Va. (804)865-6848 19.2         | 
  984.   || Block Begin (Ctrl-K,B)    |                                            | 
  985.   || Block End   (Ctrl-K,K)    |                                            | 
  986.   || Block Write (Ctrl-K,W)    |                                            |
  987.   |+===========================+                                            | 
  988.   |                                                                         |
  989.   +=========================================================================+
  990.   Display Next Message Matching Current Search Specification
  991.  
  992.                The  help  menu displays  all of  the  major options  of the
  993.                reader.  Next to each  option is the key you would  press to
  994.                activate  that option from within the reader.  At the bottom
  995.                on  the  screen  is a  one-line  description  of  the option
  996.                currently  highlighted.   You  can  also  access the  option
  997.                directly from within the help menu by typing the highlighted
  998.                letter for the option  you wish to activate, or,  of course,
  999.                selecting it with the Enter key or your mouse.
  1000.  
  1001.                For example,  if you wanted  help with how to  read the next
  1002.                message, the help menu would show you that the option "next"
  1003.                is "(Right Arrow)." You could exit the help menu by pressing
  1004.                ESC  and then press the  right arrow to  activate the option
  1005.                and read the next message.   Or, while remaining in the help
  1006.                menu,  you could highlight that  option by using  the up and
  1007.                down arrow keys to reach the option Next, and then press the
  1008.                Enter  key, If you're using  a mouse, "double  click" on the
  1009.                highlighted  option. In each case you will then be shown the
  1010.                next message.
  1011.  
  1012.  
  1013.  
  1014.  
  1015.  
  1016.  
  1017.  
  1018.                                                                          20
  1019.  
  1020.                The  help menu  is large  and hides  most of  the underlying
  1021.                message and its  header.  It takes a key  stroke to activate
  1022.                it.  It  is  not designed  to  be  the  principal method  of
  1023.                accessing the reader commands.  It is designed as a  type of
  1024.                "training  wheels" to help give you an easier start with the
  1025.                reader.
  1026.  
  1027.                As  you use  the  reader,  you  will  find  that  you  start
  1028.                remembering  the keystrokes  that go  with the  commands you
  1029.                most often use.  Once you know the keystrokes that go with a
  1030.                particular command, you will have no need for the help menu.
  1031.                But it is always  available for those commands that  you may
  1032.                only occasionally use or for those that you have forgotten.
  1033.  
  1034.                You will notice  that there is a help line  on the bottom of
  1035.                the  screen.  Whenever the  helper  menu  is activated,  the
  1036.                bottom line of  the screen contains  a short description  of
  1037.                the highlighted  command. As you  move the highlight  bar up
  1038.                and down, the help  line changes to match the item  that you
  1039.                have highlighted.
  1040.  
  1041.                There  is also a help  menu available when  you are entering
  1042.                messages.  It is  used the same way; it simply has different
  1043.                commands on it.
  1044.  
  1045.           Leaving Messages
  1046.  
  1047.                There  are  two  ways you  can  leave  a  message using  the
  1048.                MegaMail(tm) Reader : Reply and Enter.  
  1049.  
  1050.                The  Reply  Option  (Alt-R)  is  specifically  designed  for
  1051.                replying  to a  message.   When you  press Alt-R,  a message
  1052.                header is placed on top of the screen with all of the fields
  1053.                filled in for you.  You have  a chance to change any of  the
  1054.                fields you  want to change by  using the Tab, Shift  Tab, Up
  1055.                and  Down Arrow keys to  move around the  various fields and
  1056.                then  Control-Enter (Ctrl-Enter)  to save.   When  you press
  1057.                Ctrl-Enter, you are then given a blank area in which to type
  1058.                your message.
  1059.  
  1060.                If  you use the Enter  function (Alt-E), the  procedure is a
  1061.                bit longer.   When you  press Alt-E, you  will be  presented
  1062.                with a  listing of all  the BBSs  in the reader.   You  must
  1063.                first  select the BBS you are interested in accessing.  Move
  1064.                the highlight bar  to the name of the BBS  you wish to leave
  1065.                your message to and press Enter.  You will be presented with
  1066.                a  listing of  all  the conferences  for  the BBS  that  you
  1067.                selected.   Select the conference in which you plan to leave
  1068.                the message. 
  1069.  
  1070.                Then,  you will  be  presented with  a  partially filled  in
  1071.                message header.  You can use the Tab, Shift-Tab, Up and Down
  1072.  
  1073.  
  1074.  
  1075.  
  1076.  
  1077.  
  1078.  
  1079.                                                                          21
  1080.  
  1081.                arrows  to move  around the  header filling  in each  of the
  1082.                fields.  When you are done press Ctrl-Enter.  (Note that you
  1083.                must  fill in the  Subject and To: fields;  if you don't the
  1084.                reader will beep and return you to the required field)   You
  1085.                will  then be  presented  with a  blank  area to  type  your
  1086.                message in.
  1087.  
  1088.                While  entering your  message,  most  Wordstar commands  are
  1089.                available.    If  you   are  unfamiliar  with  the  Wordstar
  1090.                commands, see  appendix A for  a listing of  these commands.
  1091.                You  may also use the  "another reader" function  to look at
  1092.                other messages.   See the  section on this  option for  more
  1093.                details.
  1094.  
  1095.                Also note that while entering messages, you can use the Alt-
  1096.                R  key to "re-edit" the  header on the  message that you are
  1097.                entering.
  1098.  
  1099.           Tag Lines
  1100.  
  1101.                A tag line is appended to  the end of each message you leave
  1102.                using the  MegaMail Reader.   Part  of the tag  line is  not
  1103.                configurable by you (the part that says "MegaMail"), but you
  1104.                can specify what  you want to appear in the  rest of the tag
  1105.                line.
  1106.  
  1107.                Usually,  people  put  little  phrases  that  they  like  or
  1108.                messages in their tag  lines.  Sometimes sysops like  to put
  1109.                the name  and number of their  BBS in their tag  line.  What
  1110.                you put in your tag line is really up to you.
  1111.  
  1112.                The  MegaMail  Reader allows  you to  specify  up to  10 tag
  1113.                lines, and,  which one to put on the bottom of messages, or,
  1114.                optionally,  you can tell  the reader to  pick randomly from
  1115.                the tag lines that you have put in.
  1116.  
  1117.                You  can edit your tag  line options by  pressing Alt-T when
  1118.                reading  or entering messages.  (The tag line option is also
  1119.                available from the Utilities menu.)
  1120.  
  1121.  
  1122.  
  1123.  
  1124.  
  1125.  
  1126.  
  1127.                                                                          22
  1128.  
  1129.                When  you press Alt-T or select Tag Lines from the utilities
  1130.                menu, you will see a screen with your tag lines  (if any) on
  1131.                it:
  1132.  
  1133.                +==================Edit Tag Lines=========================+
  1134.                |                                                         |
  1135.                |Tag Line to Use: 1  (Entering 0 will Randomly Select ... |
  1136.                |                                                         |
  1137.                |   Tag # 1  :  Life is full of surprises.                |
  1138.                |                                                         |
  1139.                |   Tag # 2  :                                            |
  1140.                |                                                         |
  1141.                |   Tag # 3  :                                            |
  1142.                |                                                         |
  1143.                |   Tag # 4  :                                            | 
  1144.                |                                                         |
  1145.                |   Tag # 5  :                                            |
  1146.                |                                                         |
  1147.                |   Tag # 6  :                                            |
  1148.                |                                                         |
  1149.                |   Tag # 7  :                                            |
  1150.                |                                                         |
  1151.                |   Tag # 8  :                                            |
  1152.                |                                                         |
  1153.                |   Tag # 9  :                                            |
  1154.                |                                                         |
  1155.                |   Tag # 10 :                                            |
  1156.                +=========================================================+
  1157.  
  1158.                As you can  see, there are slots for up to 10 tag lines, and
  1159.                one slot to specify which tag line to  use.  You can use the
  1160.                your arrow keys or mouse to move around this screen and fill
  1161.                in the slots, and, when you are done, you exit the screen by
  1162.                hitting PgDn or Control-Enter.  
  1163.  
  1164.  
  1165.           Deleting Messages
  1166.  
  1167.                You  can  delete or  "kill" a  message  from your  reader by
  1168.                pressing the  Alt-K key.  You will then be asked if you want
  1169.                to kill the message.   Note that the default answer  to this
  1170.                question is configurable on  the Configuration screen.  When
  1171.                you  kill a  message in  the  reader, it  does not  kill the
  1172.                message on the BBS -- it just kills  it in the reader.  Also
  1173.                note that if you want to kill a large group of messages, you
  1174.                can  use the Purge/Repair option.   See the  section on this
  1175.                option for more details.
  1176.  
  1177.  
  1178.  
  1179.  
  1180.  
  1181.  
  1182.  
  1183.                                                                          23
  1184.  
  1185.           Searching
  1186.  
  1187.                The Alt-F option allows you to set the search specification.
  1188.                The  search  specification  defines which  messages  will be
  1189.                shown to  you and which will  not.  You may  search based on
  1190.                any  field or even combinations of fields in the header. For
  1191.                example, you may search for a user name, your own name, or a
  1192.                particular subject matter present in the subject field.  You
  1193.                are  shown  only  messages  that match  the  current  search
  1194.                specification.  
  1195.  
  1196.  
  1197.                Using the Alt-F Option
  1198.  
  1199.                     Pressing  the ALT-F  key  will show  you the  following
  1200.                     screen.
  1201.  
  1202.   +=======================Select Search Example===========================+ 
  1203.   |                                                      Level: 1         | 
  1204.   |BBS:             Conference:                       Imported:  1/01/1600| 
  1205.   |                                                                       | 
  1206.   |  To:                                Number:           Date:  1/01/1600| 
  1207.   |From:                             Reference:           Time: 12:00 am  | 
  1208.   |Subj:                              Security:           Read:           | 
  1209.   |  Echo Flag:                                  Personal Read:           |
  1210.   +=======================================================================+
  1211.  
  1212.                     This message header  is called a search  "example."  It
  1213.                     is an example or template of the messages that you want
  1214.                     to  read.  When the reader  displays the "next" message
  1215.                     (ie.,  when you  press  the right  arrow), it  actually
  1216.                     searches for  not the  just the next  numerical message
  1217.                     but  the next  message that  matches your  example.   A
  1218.                     message is considered to  "match" your example if every
  1219.                     field that is NOT blank in your example exactly matches
  1220.                     the corresponding  fields in the message.   The initial
  1221.                     example (assuming  that you  do not have  the automatic
  1222.                     "unread"  mail mode  on) is  completely blank.   (NOTE:
  1223.                     01/01/1600 is considered a "blank" date and 12:00 am is
  1224.                     considered a "blank" time.) 
  1225.  
  1226.                     To move  in the header, use  your Tab key to  go to the
  1227.                     next field, Shift-Tab key to go to  the previous field,
  1228.                     down arrow  to go to the  next field under  the one you
  1229.                     are  editing, and  the  up arrow  to  go to  the  field
  1230.                     directly above the one you are  editing.   When you are
  1231.                     in  the Security,  Read, or  Personal Read  fields, you
  1232.                     should use the space bar to toggle between  the options
  1233.                     for these fields.   When  you are done  filling in  the
  1234.                     example, you  should press Ctrl-Enter.   For a complete
  1235.                     listing of all  the keys  you can use  when entering  a
  1236.                     message header, see Appendix A.
  1237.  
  1238.  
  1239.  
  1240.  
  1241.  
  1242.  
  1243.  
  1244.                                                                          24
  1245.  
  1246.                     When you  move to the  BBS: or Conference:  fields, you
  1247.                     will be presented with a "pick list" menu of all of the
  1248.                     BBSes or  conferences.  (Note that  the conference menu
  1249.                     only appears if the BBS:  field has a BBS in it.)   You
  1250.                     can  use this menu to put in the conference, or you can
  1251.                     select  "(Blank)"  and  type   the  conference  or  BBS
  1252.                     yourself.
  1253.  
  1254.                     All of  the fields are  exactly as described  above for
  1255.                     message headers.  Note that you can search based on all
  1256.                     fields except the "Level" field.   The Level field will
  1257.                     always  have the "level" you are at in terms of readers
  1258.                     (see the section on the "another reader" function below
  1259.                     for more information).
  1260.  
  1261.                     The fewer fields you fill in when you are searching for
  1262.                     a particular  message, the more messages  you will see,
  1263.                     and the  better your chances of  finding the message(s)
  1264.                     you  are  searching for.    The  ALT-F command  is  not
  1265.                     forgiving and  will search for the  parameters that you
  1266.                     specified EXACTLY.  The more fields you fill,  the more
  1267.                     likely for an  exact hit  but also the  more likely  to
  1268.                     have  made an  error and  to miss  the message  you are
  1269.                     seeking.  (Of course, if you enter too little, you will
  1270.                     have  many messages to look through to find the one you
  1271.                     were looking for)
  1272.  
  1273.                     If your search  fails, press ALT-F again  to repeat the
  1274.                     search, but change something.   As you TAB  through the
  1275.                     fields,  if you want to BLANK  out (erase) a previously
  1276.                     entered field, press the CTRL-Y to blank it out. Delete
  1277.                     works  as well, but the  CTRL-Y key is  faster for long
  1278.                     entries.
  1279.  
  1280.                     There are  several commands  that relate to  the search
  1281.                     example and  the Alt-F  command.  Pressing  Alt-C while
  1282.                     reading  mail  will  clear  the  entire  example,  thus
  1283.                     showing  ALL  messages.   Alt-U  will  first clear  the
  1284.                     example and then change the Personal Read flag  to "N",
  1285.                     thus  causing only those messages that you have not yet
  1286.                     read  to be displayed.   The Alt-Y key  will simply set
  1287.                     the  "TO" field  to YOU,  thus showing  you only  those
  1288.                     messages that are addressed to you.
  1289.  
  1290.  
  1291.  
  1292.  
  1293.  
  1294.  
  1295.  
  1296.                                                                          25
  1297.  
  1298.           Printing and Saving Messages
  1299.  
  1300.                The MegaMail(tm) Reader has a function specifically designed
  1301.                to  help you record important messages.  When you press Alt-
  1302.                S, you are prompted for  the name of a DOS file  or a device
  1303.                to save the  current message to.  (If you  want to print the
  1304.                message,  you should  specify PRN  as the  file to  save the
  1305.                message to.)  The  Alt-S function will write out  the entire
  1306.                message,  along  with its  header.   Note  that if  the file
  1307.                already exists, the Alt-S function  will APPEND the new text
  1308.                to the file,  along with  a line to  separate the  messages.
  1309.                This makes it very easy to keep a file of important messages
  1310.                for future reference.
  1311.  
  1312.                If you just want to write out the message text,  without its
  1313.                header, you can  block the  text using the  block begin  and
  1314.                block end  commands (F7 and F8, respectively),  and then use
  1315.                the block  write command (Control-K,W) to write the text out
  1316.                to a  file or to the printer.  The block write command works
  1317.                both  when you  are  entering a  message  and when  you  are
  1318.                reading messages.
  1319.  
  1320.           "Reverse" Threading
  1321.  
  1322.                The MegaMail(tm)  Reader has  a function designed  for those
  1323.                times when  you receive a message and  are not sure what the
  1324.                person is talking about!   When you press Alt-W,  the reader
  1325.                will immediately show  you the message to  which the current
  1326.                message is in reference  to.  The Alt-W function  works both
  1327.                while you are reading messages and when you are entering new
  1328.                ones.   When you are done  looking at the message, press Esc
  1329.                to return to  the original message.  You  can press Alt-W as
  1330.                many times  as is  necessary --  this allows you  to read  a
  1331.                thread  "backwards" to its  origin.   This function  is also
  1332.                handy  when you are replying  to a message.   Pressing Alt-W
  1333.                when  replying to  a message  will show  you the  message to
  1334.                which you are replying  -- great for making sure  your reply
  1335.                addresses the entire message!
  1336.  
  1337.           Zooming
  1338.  
  1339.                The MegaMail Reader has a "Zoom" function that allows you to
  1340.                "zoom in" on the message text.  This function is toggled  by
  1341.                pressing  the  Alt-Z key.   When  you  are "zoomed"  in, the
  1342.                header of the message  is not displayed, so that  the entire
  1343.                screen can  be used for the text of the message.  The reader
  1344.                will remain in "zoom" mode until you press Alt-Z again.
  1345.  
  1346.  
  1347.  
  1348.  
  1349.  
  1350.  
  1351.  
  1352.                                                                          26
  1353.  
  1354.           About The Personal Read Flags
  1355.  
  1356.                As you  read the messages  in your reader,  the MegaMail(tm)
  1357.                reader  will keep a running account of the messages that you
  1358.                have gone through during  that session.  When you  press the
  1359.                <ESC> to quit you will be prompted as to whether you want to
  1360.                "Update Personal Read Flags? ". You will see:
  1361.  
  1362.                          +=================================+
  1363.                          | Update Personal Read Flags? Y   |
  1364.                          +=================================+
  1365.  
  1366.                If you press ENTER and accept  the "Y", the Reader will mark
  1367.                all the messages that you have read during this session with
  1368.                a "Y" in the Personal Read field.
  1369.  
  1370.                Like all  of the other fields,  this field can be  used in a
  1371.                search.   This  function  allows  you  to  read  only  those
  1372.                messages that you have not yet read in the reader.
  1373.  
  1374.  
  1375.  
  1376.  
  1377.  
  1378.  
  1379.  
  1380.                                                                          27
  1381.  
  1382.           Quick Scan
  1383.  
  1384.                Using the Alt-Q function while reading a message  allows you
  1385.                to take a "Quick look" at messages within the message base.
  1386.  
  1387.   +=============================================================================+ 
  1388.   |                                                           Level: 1          |
  1389.   |+==============================Quick Scan===============================+|
  1390.   ||CONNECT  Support  PCRELAY           ARMAND MICHAUD    SYSOP            ||
  1391.   ||CONNECT  Support  Procomm+ script h BILL HUNT         MIKE RIVERS      ||
  1392.   +|CONNECT  Support  PCRELAY           CHRIS KALABOUKIS  SYSOP            |+
  1393.   +|RUNNINGA          SESSION REPORT    MegaMail(tm) DOOR YOU              |+
  1394.   ||RUNNINGA          SESSION REPORT    MegaMail(tm) DOOR YOU              ||
  1395.   ||RUNNINGA BUSINESS SHIPPING A PC XCO BRIAN LEE         ALL              ||
  1396.   ||RUNNINGA BUSINESS PLEASE REPLY!     SKIP ROSS         CONFERENCE HOST- ||
  1397.   ||RUNNINGA BUSINESS SMALL BUSINESS FO HARRY ANDERSON    ALL              ||
  1398.   ||RUNNINGA BUSINESS BUSINESS OPPORTUN BRUCE BURKHARDT   ALL              ||
  1399.   ||RUNNINGA FORSALE  WANTED: 41256 RAM RJ KULMAN         LARRY CARLEY     ||
  1400.   ||RUNNINGA FORSALE  Encyclopedia Want RJ KULMAN         CINDY BARTORILLO ||
  1401.   ||RUNNINGA SYSOP    Civil Rights Act? TIM ROSSITER      RICK FRY         ||
  1402.   ||RUNNINGA SYSOP    SHAREWARE         DAVE HILL         WILLIAM PARFITT  ||
  1403.   ||RUNNINGA SYSOP    Tame/DV/PCBoard   ROBERT BROWN      ROBERT TODD      ||
  1404.   ||RUNNINGA UNIX     Editors for UNIX  DENNIS MCCUNNEY   JOHN MCNAMARA    ||
  1405.   ||RUNNINGA UNIX     Sed / Lex         DENNIS MCCUNNEY   DANE BEKO        ||
  1406.   ||RUNNINGA UPLINK   FRIENDS           SUSIE PETERSON    KEN HALFON       ||
  1407.   ||RUNNINGA UPLINK   WHAT'S HAPPENING  BETH BUSH         CHERYL BAEZ      ||
  1408.   |+=======================================================================+|
  1409.   |                                                                         |
  1410.   +=========================================================================+
  1411.  
  1412.                The  Quick Scan shows all  messages, sorted by  the BBS they
  1413.                came from, the Conference  they are in, and then  finally by
  1414.                their  message  number.    It presents  the  messages  in  a
  1415.                chronological order  by conference.  The  Quick Scan Display
  1416.                consists of the following information, in this order:
  1417.  
  1418.                     BBS ID              The  ID  of  the  board   that  the
  1419.                                         message is from.
  1420.  
  1421.                     Conference Name     The   conference   containing   the
  1422.                                         message. Notice that  there may  be
  1423.                                         messages   where   the   conference
  1424.                                         "field"  is  blank.     These   are
  1425.                                         message   from   the   MegaMail(tm)
  1426.                                         Reader  itself  addressed  to  you.
  1427.                                         This  type  of  message  will  only
  1428.                                         appear  if  you have  selected Door
  1429.                                         Text in Message: Yes while you were
  1430.                                         configuring MegaMail(tm) Reader.
  1431.  
  1432.  
  1433.  
  1434.  
  1435.  
  1436.  
  1437.  
  1438.                                                                          28
  1439.  
  1440.                     Subject             Is  the exact subject  field of the
  1441.                                         message.
  1442.  
  1443.                     From                The  name of  the person  who wrote
  1444.                                         the message.
  1445.  
  1446.                     To                  The name of the person  the message
  1447.                                         is directed to.
  1448.  
  1449.                While you are reading a message, you may press the Alt-Q key
  1450.                which  will  then  open  another  window and  show  you  the
  1451.                messages  that are in the message base.   This allows you to
  1452.                look  at the header information on other messages within the
  1453.                messages file.
  1454.  
  1455.                By using  the  up/down and  PgUp/PgDn keys,  you can  scroll
  1456.                through the listing  of the messages.   Note: if you  have a
  1457.                mouse  installed you can also  use it to  scroll through the
  1458.                listing.   In the upper right and lower right corners, there
  1459.                are  up and down arrows, which, when clicked on, will scroll
  1460.                the display one entire screen. 
  1461.  
  1462.                If you press the Enter key or click on a highlighted record,
  1463.                the reader  will display that  particular message.   You can
  1464.                press Alt-R and reply to that message if  so desired as well
  1465.                as use Alt-W to follow a subject thread of the messages.
  1466.  
  1467.                Pressing any of  the arrows keys will return you to the next
  1468.                message that the MegaMail(tm)  Reader has in its  file base,
  1469.                not  necessarily the next message as  displayed by the ALT-Q
  1470.                function.   You can, however, press Alt-Q again to return to
  1471.                the quick scan where you left off.
  1472.  
  1473.           "Another Reader" Function
  1474.  
  1475.                Another  Reader -- Alt-A  -- is exactly what  it says.  When
  1476.                you press Alt-A when reading mail or entering a new message,
  1477.                "another reader"  appears.  This "new"  reader is completely
  1478.                independent.  All functions, including leaving new messages,
  1479.                quick scanning,  and  searching, are  active.   One  of  the
  1480.                advantages of the  Alt-A command  is that it  allows you  to
  1481.                quote or copy a message from one user to  another user, even
  1482.                across different conferences or even BBSes.  It is as if you
  1483.                were  starting into  the reader afresh.  You can  search for
  1484.                other  messages  or  topics  without  losing  your  original
  1485.                position  in  the  message  base.   The  Alt-A  function  is
  1486.                automatically used when you use the Alt-W function.
  1487.  
  1488.                When  you press Alt-A, the "Level" number in the upper right
  1489.                corner will rise.   To return to  level 1, or  your original
  1490.                reading position, press the ESC  key until you have returned
  1491.                to level  1.  You will be back at your original message. (If
  1492.  
  1493.  
  1494.  
  1495.  
  1496.  
  1497.  
  1498.  
  1499.                                                                          29
  1500.  
  1501.                you press the ESC key too many times you will of course exit
  1502.                from the reader.)
  1503.  
  1504.                An Example of its usage while reading a message....
  1505.  
  1506.   +=========================================================================+ 
  1507.   |                                                        Level: 1         | 
  1508.   |BBS: RUNNINGA      Conference: STARTREK              Imported:  1/11/1990| 
  1509.   |                                                                         | 
  1510.   |  To: ALL                              Number: 7221      Date:  1/10/1990| 
  1511.   |From: TIM MOELLER                   Reference: 0         Time: 10:40 am  | 
  1512.   |Subj: TRIVIA                         Security: PUBLIC    Read: Y         | 
  1513.   |  Echo Flag:Y                                   Personal Read: Y         |
  1514.   +=========================================================================+
  1515.   +=========================================================================+ 
  1516.   |                                                                         | 
  1517.   |My trivia question is... What were the episodes (including the           | 
  1518.   |movies) where a crew member or passenger was left behind (alive)?        | 
  1519.   |                                                                         | 
  1520.   |My own partial answer includes three:                                    | 
  1521.   |    1. "The Corbomite Maneuver", as discussed.                           | 
  1522.   |    2. the episode where Kahn was left on Ceti Alpha V (with a female    | 
  1523.   |        crew member)                                                     | 
  1524.   |    3. the episode with Cochrane and the cloud creature when the female  | 
  1525.   |        official (who used to play Betty on "Father Knows Best")         | 
  1526.   |        was left behind.                                                 | 
  1527.   |    4. "For the World is Hollow and I Have Touched the Sky", where       | 
  1528.   |                                                                         |
  1529.   +=========================================================================+
  1530.  
  1531.           And you decide to reply to it.....
  1532.  
  1533.  
  1534.  
  1535.  
  1536.  
  1537.  
  1538.  
  1539.                                                                                 30
  1540.  
  1541.   +=========================================================================+ 
  1542.   |                                                        Level: 1         | 
  1543.   |BBS: RUNNINGA        Conference: STARTREK            Imported:  1/16/1990| 
  1544.   |                                                                         | 
  1545.   |  To: TIM MOELLER                      Number: 7324      Date:  1/14/1990| 
  1546.   |From: STEVEN ROGERS                 Reference: 7221      Time:  9:35 am  | 
  1547.   |Subj: TRIVIA                         Security: PUBLIC    Read: N         | 
  1548.   |  Echo Flag:Y                                   Personal Read: Y         |
  1549.   +=========================================================================+
  1550.   +=========================================================================+ 
  1551.   |                                                                         | 
  1552.   |TM>     3. the episode with Cochrane and the cloud creature when the fem | 
  1553.   |TM>         official (who used to play Betty on "Father Knows Best")     | 
  1554.   |TM>         was left behind.                                             | 
  1555.   |                                                                         | 
  1556.   |I don't know if I would count that one, technically She wasn't a Crew    | 
  1557.   |Member.                                                                  | 
  1558.   |                                                                         | 
  1559.   |Can you count, The Menagerie<sp>, in which former crew member, Capt Pike | 
  1560.   |was taken back to the planet to stay?                                    | 
  1561.   |                                                                         | 
  1562.   |                                                                         | 
  1563.   |                                                                         |
  1564.   +=========================================================================+
  1565.  
  1566.  
  1567.           No problem, just as if you were reading it on the BBS.
  1568.  
  1569.           A couple of days later some one else enter a message  in reply to
  1570.           yours above.
  1571.  
  1572.  
  1573.  
  1574.  
  1575.  
  1576.  
  1577.  
  1578.                                                                                 31
  1579.  
  1580.   +=========================================================================+ 
  1581.   |                                                        Level: 1         | 
  1582.   |BBS: RUNNINGA      Conference: STARTREK              Imported:  1/17/1990| 
  1583.   |                                                                         | 
  1584.   |  To: YOU                              Number: 7372      Date:  1/16/1990| 
  1585.   |From: RON MYERS                     Reference: 7324      Time:  1:09 am  |
  1586.   |Subj: TRIVIA                         Security: PUBLIC    Read: Y         | 
  1587.   |  Echo Flag:Y                                   Personal Read: Y         |
  1588.   +=========================================================================+
  1589.   +=========================================================================+ 
  1590.   |                                                                         | 
  1591.   |What about "The Corbomite Maneuver"? Didn't they leave one of the crew   | 
  1592.   |members with that little tike? An exchange of culture and what not?      | 
  1593.   |                                                                         | 
  1594.   |Ron...                                                                   | 
  1595.   |                                                                         | 
  1596.   |                                                                         | 
  1597.   |                                                                         | 
  1598.   |                                                                         | 
  1599.   |PCRelay:TWEXCH ->                                                        | 
  1600.   |4.10ß9            The Exchange BBS (804) 340-5042 * 9 NODES !            | 
  1601.   |                                                                         | 
  1602.   |                                                                         |
  1603.   +=========================================================================+
  1604.  
  1605.  
  1606.                You  could use Alt-R to reply to this message directly. This
  1607.                is a  level 1  message and you  press Ctrl-Enter or  PgDn to
  1608.                start entering text to the reply.
  1609.  
  1610.                While  you are replying you could press Alt-A to re-read his
  1611.                message  to you.    The message  will  appear as  a  Level-2
  1612.                message since it is in the second reader you have opened.
  1613.  
  1614.                You decide to quote some of his message so you  mark a block
  1615.                of his message off and then return (by pressing the Esc key)
  1616.                to your Level-1 reply to quote him with the Alt-Q before you
  1617.                enter your own response.
  1618.  
  1619.                You could then press the Alt-A keys again and return back to
  1620.                his message to make sure you don't want to quote any more of
  1621.                the  message. Your  second look  at the  message is  still a
  1622.                Level-2  peek.   But now  you  press Alt-W  in order  to see
  1623.                "what"  you had  written in your  original message  (the one
  1624.                that he replied  to you about) and now you  are at a level-3
  1625.                message.   You have "three"  readers open  - level 1  is the
  1626.                reply  you are working  on, level 2  is the  message you are
  1627.                replying  to and level-3 is the  original message you wrote.
  1628.                Neat?
  1629.  
  1630.                If you decide to  get even more information you  could press
  1631.                Alt-W again, to show yourself the original  message that you
  1632.  
  1633.  
  1634.  
  1635.  
  1636.  
  1637.  
  1638.  
  1639.                                                                          32
  1640.  
  1641.                had initially REPLIED to (unless  you had packed the message
  1642.                from  the  message  base) and  find  yourself  at a  level-4
  1643.                message!  You may block this original message  (level-4) and
  1644.                press the Esc key until you return to your Level-1 reply and
  1645.                then  press  Alt-Q to  Quote  the  original message,  (first
  1646.                message), back to this person, who won't believe it!
  1647.  
  1648.                The reply is shown below along with a Quote from his message
  1649.                to me and ALSO a Quote from the original message thread that
  1650.                started it all.
  1651.  
  1652.   +=========================================================================+ 
  1653.   |                                                        Level: 1         | 
  1654.   |BBS: RUNNINGA      Conference: STARTREK              Imported:  1/17/1990| 
  1655.   |                                                                         | 
  1656.   |  To: RON MYERS                        Number: (NEW)     Date:  1/17/1990| 
  1657.   |From: STEVEN ROGERS                 Reference: 7372      Time:  7:37 pm  | 
  1658.   |Subj: TRIVIA                         Security: PUBLIC    Read: N         | 
  1659.   |  Echo Flag:Y                                   Personal Read: Y         |
  1660.   +=========================================================================+
  1661.   +=========================================================================+ 
  1662.   |                                                                         | 
  1663.   |RM> What about "The Corbomite Maneuver"? Didn't they leave one of the cr | 
  1664.   |RM> members with that little tike? An exchange of culture and what not?  | 
  1665.   |                                                                         | 
  1666.   |I wasn't in dispute about that show, leaving the Crew Member behind.  As | 
  1667.   |you can see that one was mentioned.                                      | 
  1668.   |                                                                         | 
  1669.   |From: Tim Moeller                                                        | 
  1670.   |TM> My own partial answer includes three:                                | 
  1671.   |TM>     1. "The Corbomite Maneuver", as discussed.                       | 
  1672.   |TM>     2. the episode where Kahn was left on Ceti Alpha V (with a femal | 
  1673.   |TM>         crewmember)                                                  | 
  1674.   |                                                                         |
  1675.   +=========================================================================+
  1676.  
  1677.  
  1678.           Quoting Functions
  1679.  
  1680.                You may quote from  a message before you actually  enter the
  1681.                reply mode as well after you begin your reply.  
  1682.  
  1683.                To quote before you  enter the reply mode, move  the cursor,
  1684.                using the up and down arrow keys or your mouse,  to the line
  1685.                you wish to start quoting and press CTRL-K,B (or F7).  Using
  1686.                the arrow keys or mouse,  move the cursor to the end  of the
  1687.                section you wish to quote and press CTRL-K,K  (or F8).  Note
  1688.                that the beginning of  a block always defaults to  the first
  1689.                line, so  that all you really  need do if you  want to start
  1690.                from the first line of a message, is move down the number of
  1691.                lines you wish to quote and press CTRL-K,K (or F8).
  1692.  
  1693.  
  1694.  
  1695.  
  1696.  
  1697.  
  1698.  
  1699.                                                                          33
  1700.  
  1701.                Once you have blocked  off your quote, go  to reply mode  by
  1702.                pressing Alt-R.
  1703.  
  1704.                You can only  quote whole  lines although you  can edit  the
  1705.                quoted  section to  shorten a  line while  you are  in reply
  1706.                mode.
  1707.  
  1708.                If,  while replying to a  message, you decide  to quote from
  1709.                the  message you are replying to,  press Alt-W.  You will be
  1710.                shown  the entire original message.  Block off your quote in
  1711.                the same manner as  described above.  When are  you finished
  1712.                press Esc to return to your reply and immediately press Alt-
  1713.                Q for Quote.
  1714.  
  1715.                You may  also have  multiple quotes from  different messages
  1716.                than  the one you are replying to directly by pressing Alt-A
  1717.                to generate "another reader."   While in the Alt-A  mode you
  1718.                can use all  of the normal reader functions.   When you have
  1719.                located the message and blocked off your quote, press ESC to
  1720.                return to your original reply and use the Alt-Q key to bring
  1721.                in your text.
  1722.  
  1723.                Note  that if you want to quote someone without putting your
  1724.                quoting prefix  in, you can  use the Control-K,C  block copy
  1725.                command.   You can also use the Control-K,W command to write
  1726.                out  a section  of  marked text,  or,  if you  are  entering
  1727.                message text, you can use the Control-K,R block read command
  1728.                to read  in text from  a text  file on your  disk into  your
  1729.                message.
  1730.  
  1731.                Experiment --  The MegaMail(tm) Reader is  very flexible and
  1732.                powerful when it comes to Quoting.
  1733.  
  1734.           Command Line Parameters
  1735.  
  1736.                You can manage your  reader through the use of  command line
  1737.                parameters. This  allows you to  use your reader  and obtain
  1738.                your mail via a set of batch files.
  1739.  
  1740.                Valid Command Line Parameters:
  1741.  
  1742.                     /NOMOUSE       Disables mouse support.
  1743.  
  1744.                     /SLOWSCREEN    Disables direct screen writes - use only
  1745.                                    if necessary!
  1746.  
  1747.                     /MONO          Forces Monochrome operation.
  1748.  
  1749.  
  1750.  
  1751.  
  1752.  
  1753.  
  1754.  
  1755.                                                                          34
  1756.  
  1757.                     /MACROFILE     Specifies alternate  macro file (default
  1758.                                    is    MEGAREAD.MAC)    Correct   syntax:
  1759.                                    /MACROFILE FILENAME.   There is  no need
  1760.                                    to create  the new file; the reader will
  1761.                                    do so the first time it works with it.
  1762.  
  1763.                     /BASENAME      Specifies  alternate  message base  file
  1764.                                    name.    Cannot  contain  an  extension.
  1765.                                    Default  is  MESSAGES.    Proper  syntax
  1766.                                    /BASENAME   FILENAME     Ie.,  /BASENAME
  1767.                                    MYMAIL.  There is  no need to create the
  1768.                                    new mail file; the reader will do so the
  1769.                                    first time it works with it.
  1770.  
  1771.                     /CONFIGFILE    Specifies    an alternate  configuration
  1772.                                    file.    The   default  is   CONFIG.MGA.
  1773.                                    Proper syntax: /CONFIGFILE FILENAME
  1774.  
  1775.                     /NOEMS         Disables the reader's use of EMS memory.
  1776.  
  1777.                     /EXPORT BBSID  Export mail from BBSID & return to DOS.
  1778.  
  1779.                     /IMPORT BBSID  Import mail from BBSID & return to DOS. 
  1780.  
  1781.                     /PACK XXX      Pack  and  remove all  messages imported
  1782.                                    XXX days  ago.   (use /PACK 999  to just
  1783.                                    "purify" and delete none)
  1784.  
  1785.                     /BIOSSCROLL    Turns    off   the    reader's   "smooth
  1786.                                    scrolling"  routines for  CGAs.   If you
  1787.                                    have  a CGA  card, using  this parameter
  1788.                                    will speed up the  scrolling of text  in
  1789.                                    the  reader, but  the scrolling  will be
  1790.                                    less attractive.
  1791.  
  1792.                     /NOSNOW        Turns  off  the  reader's  checking  for
  1793.                                    snow.  Will drastically speed  up screen
  1794.                                    writes on CGAs, but may result in "snow"
  1795.                                    on the screen.
  1796.  
  1797.                     /SAFETY        Turns on the reader's "safety net" mode.
  1798.                                    In this mode, the reader works with  the
  1799.                                    MESSAGES.DAT   and   MESSAGES.IX   files
  1800.                                    differently  to  insure  that  they  are
  1801.                                    recoverable without a  pack if the power
  1802.                                    goes out.  The price you pay for this is
  1803.                                    that this mode  is significantly  slower
  1804.                                    than "normal" mode.
  1805.  
  1806.  
  1807.  
  1808.  
  1809.  
  1810.  
  1811.  
  1812.                                                                          35
  1813.  
  1814.                     /COLORFILE     Specifies  the  file  to  use  to  store
  1815.                                    information  about  the  colors you  are
  1816.                                    using  inside  the  reader.   Syntax  is
  1817.                                    /COLORFILE  Filename  where filename  is
  1818.                                    the name of the file to use.
  1819.  
  1820.                     /50 or /43     These  command  line options  will cause
  1821.                                    the reader  to go  into 43 line  mode if
  1822.                                    you have an EGA  or 50 line mode if  you
  1823.                                    have a VGA.  This allows you to see much
  1824.                                    more of  a message on the  screen at one
  1825.                                    time.  They have no effect if you do not
  1826.                                    have an EGA or VGA.
  1827.  
  1828.                     /NOZIP         Causes the reader to  skip the PKZIP and
  1829.                                    PKUNZIP   steps   when   importing   and
  1830.                                    exporting mail.  See the section below.
  1831.  
  1832.                An  example:  a   batch  file  that  would   do  a  complete
  1833.                MegaMail(tm)  cycle  and  pack  the  messages  at  the  end,
  1834.                removing messages 10 days or older:
  1835.  
  1836.                               cd \megamail
  1837.                               megaread /export connect
  1838.                               cd\telix
  1839.                               telix {run a script}
  1840.                               cd \megamail
  1841.                               megaread /import connect /pack 10
  1842.  
  1843.                Note that  while the order  of most command  line parameters
  1844.                doesn't  matter,  if  more  than one  "batch"  command  line
  1845.                parameters are to be specified, the actions are taken in the
  1846.                order that they appear on the command line.
  1847.  
  1848.           The /NOZIP Command Line Parameter
  1849.  
  1850.                The /NOZIP command line parameter  causes the reader to skip
  1851.                the PKUNZIP  and PKZIP  steps when importing  and exporting.
  1852.                This  is desirable  if  you are  running under  tight memory
  1853.                restrictions.   When  using this  option and  importing, you
  1854.                must first  unzip  the  .DL file  you  downloaded  into  the
  1855.                reader's  work directory.  Then  you may run  the reader and
  1856.                import  it.  When exporting,  you must export  in the reader
  1857.                and then use pkzip to put the files into the .UL file.
  1858.  
  1859.                If you're using this option, you  may want to make two batch
  1860.                files that import and export a given node:
  1861.  
  1862.                     IMPORT.BAT:
  1863.                          c:
  1864.                          cd \mega\work
  1865.                          pkunzip c:\downloaddir\%1.DL
  1866.  
  1867.  
  1868.  
  1869.  
  1870.  
  1871.  
  1872.  
  1873.                                                                          36
  1874.  
  1875.                          cd ..
  1876.                          megaread /nozip /import %1
  1877.  
  1878.                     EXPORT.BAT
  1879.                          C:
  1880.                          cd \mega
  1881.                          megaread /nozip /export %1
  1882.                          cd work
  1883.                          pkzip -m c:\uploaddir\%1.UL
  1884.  
  1885.                These batch files are  provided in the MegaMail  package for
  1886.                you.  All  you should  need to change  is the uploaddir  and
  1887.                downloaddir, and possibly  the c:'s (should be the  drive in
  1888.                which you have your megamail reader subdirectory) and the cd
  1889.                \mega's (should be the  directory where your MegaMail reader
  1890.                lives.)
  1891.  
  1892.           Repairing and Purging Mail
  1893.  
  1894.                The Repair/Purge  option, located on the  Utilities menu, is
  1895.                used to manage  mail already in your reader.   There are two
  1896.                situations in  which you  would need to  use this  function.
  1897.                The first, and most common, is to keep the amount of mail in
  1898.                your reader  from becoming  large and unmanageable.   Unless
  1899.                you use this option, mail is never deleted from your reader.
  1900.  
  1901.                The Repair/Purge Mail File  option has two ways of  removing
  1902.                mail from your reader.   The first way is based on  the date
  1903.                on which the messages were IMPORTED into your reader and the
  1904.                second is  by  example  (see  below). When  you  select  the
  1905.                Repair/Purge  option  from  the  Utilities menu,  the  first
  1906.                question you will be asked is whether you want to remove any
  1907.                mail from your reader at all.
  1908.  
  1909.  
  1910.  
  1911.  
  1912.  
  1913.  
  1914.  
  1915.                                                                          37
  1916.  
  1917.           Repair/Purge Mail From Reader Mail File
  1918.           +================================+
  1919.           | BBS  Read  Utilities           |
  1920.           +============+===============+===+
  1921.                        | Repair/Purge  |
  1922.                        | Edit Macro    |
  1923.                        | Configuration |
  1924.                        +===============+
  1925.  
  1926.               +===============Maintain Reader Message Base================+
  1927.               |                                                           |
  1928.               | Remove any mail from the message base when packing? Y     |
  1929.               |                                                           |
  1930.               |                                                           |
  1931.               |                                                           |
  1932.               |                                                           |
  1933.               |                                                           |
  1934.               |                                                           |
  1935.               |                                                           |
  1936.               +===========================================================+
  1937.  
  1938.  
  1939.                You  should respond "Y" if you want  to remove mail from the
  1940.                reader. You  will then be asked  if you wish to  remove mail
  1941.                based  on date.   You should  answer "Y"  to remove  mail by
  1942.                date.   You  will then  be asked  the number  of days  old a
  1943.                message  has to be for  it to be  deleted. Remember that the
  1944.                date used for  this process is the date when the message was
  1945.                imported  into your reader, NOT the day that the message was
  1946.                left.  This  prevents "old" BBS  mail, that  is new to  your
  1947.                reader, from being deleted.
  1948.  
  1949.                You should answer  this question with the  maximum number of
  1950.                days you want mail to  be kept in your reader.   Purging can
  1951.                take a long time, depending on the quantity of mail you have
  1952.                in  your reader and  the speed of your  computer.  Note that
  1953.                this  option can  be invoked  from the  command line.   This
  1954.                allows you to pack  your reader's message base automatically
  1955.                in an "event"  or perhaps  once a day  in your  AUTOEXEC.BAT
  1956.                file.
  1957.  
  1958.                The  second  way of  removing mail  from  your reader  is by
  1959.                example.  This is similar  to searching, where any  messages
  1960.                that match the example you give, are purged from the message
  1961.                base.  This  option is useful if you want  to remove a group
  1962.                of  messages.   For  example, if  you  wished to  remove all
  1963.                messages  that  were in  the  conference  "sysop" from  your
  1964.                reader,  you could  do so  by purging  with an  example that
  1965.                matched all messages with "sysop" in the conference field.
  1966.  
  1967.                To use this option, choose  the Repair/Purge option from the
  1968.                Utilities  menu and answer "Y"  when the reader  asks you if
  1969.  
  1970.  
  1971.  
  1972.  
  1973.  
  1974.  
  1975.  
  1976.                                                                          38
  1977.  
  1978.                you  want  to remove  any mail  from  the message  base when
  1979.                packing.   Then, type "N"  when the  reader asks you  if you
  1980.                want to  remove mail by date.   (Note that if  you type "Y",
  1981.                and use the  example purging,  all messages that  are the  X
  1982.                number  of days  you specify  old OR  match the  example you
  1983.                specify will be deleted.) 
  1984.  
  1985.                When you are asked  if you wish to purge by  example, answer
  1986.                "Y".  When you press ENTER, you will be greeted by a "blank"
  1987.                example:
  1988.  
  1989.  
  1990.   +=========================Select Purge Example============================+ 
  1991.   |                                                        Level: 1         | 
  1992.   |BBS:               Conference:                       Imported:  1/01/1600| 
  1993.   |                                                                         | 
  1994.   |  To:                                  Number:           Date:  1/01/1600| 
  1995.   |From:                               Reference:           Time: 12:00 am  | 
  1996.   |Subj:                                Security:           Read:           | 
  1997.   |  Echo Flag:                                    Personal Read:           |
  1998.   +=========================================================================+
  1999.           +===============Maintain Reader Message Base================+
  2000.           |                                                           |
  2001.           | Remove any mail from the message base when packing? Y     |
  2002.           | Remove By Date ? N                                        |
  2003.           | Remove by Example? Y                                      |
  2004.           |                                                           |
  2005.           |                                                           |
  2006.           |                                                           |
  2007.           |                                                           |
  2008.           |                                                           |
  2009.           +===========================================================+
  2010.  
  2011.  
  2012.                Now, since  we want to remove  all mail that has  "sysop" as
  2013.                the conference,  we move over  to the Conference:  field and
  2014.                type  "sysop".   To  signal that  you  are done  editing the
  2015.                example, press Ctrl-ENTER, and the reader will begin packing
  2016.                the  message  base,  removing  all  mail  that  matches  the
  2017.                example.
  2018.  
  2019.                The other reason that you might want to run the Repair/Purge
  2020.                option is to actually  repair a message  base.  If you  exit
  2021.                the  reader  abnormally,  your  message  base  might  become
  2022.                "corrupted."   This  is  due to  advanced  routines used  to
  2023.                manage your messages  once they are inside  the reader which
  2024.                maintains a fair  amount of information  in memory and  only
  2025.                writes the information  out to  disk when you  are done  and
  2026.                exit the reader normally.  This has the advantage of greatly
  2027.                speeding your reader  up, but  if the reader  does not  exit
  2028.                normally, the information is never written back out to disk.
  2029.  
  2030.  
  2031.  
  2032.  
  2033.  
  2034.  
  2035.  
  2036.                                                                          39
  2037.  
  2038.                A  common  symptom  of  this  is  a  "Fatal  Error"  0  when
  2039.                attempting to read your mail.
  2040.  
  2041.                If you get  an error when  you attempt to  read, import,  or
  2042.                export  mail, the  first thing  to do  is  Repair/Purge your
  2043.                message  base.  It doesn't matter if you actually remove any
  2044.                mail  from the message  base when  you use  the Repair/Purge
  2045.                function.     The  Repair/Purge  option  will  automatically
  2046.                rebuild your message base, fixing any errors in it.
  2047.  
  2048.           Colors
  2049.  
  2050.                Virtually  all of the colors used in the MegaMail Reader are
  2051.                configurable by the  user.  To configure your colors, select
  2052.                "Edit Colors" from  the Utilities  menu.  You  will then  be
  2053.                presented with a listing  of things that you can  change the
  2054.                colors for :
  2055.  
  2056.                +==================Select Color to Edit===================+
  2057.                | General Text Color                                      |
  2058.                | General Text Window Border Color                        |
  2059.                | General Text Window Title Color                         |
  2060.                | Text Color for Reading Messages                         |
  2061.                | Window Border Color for Reading Messages                |
  2062.                | Window Title Color for Reading Messages                 |
  2063.                | "Alternate Text" Color for Reading Messages             |
  2064.                | Blocked Text Color for Reading Messages                 |
  2065.                | General Input Field Color                               |
  2066.                +=========================================================+
  2067.  
  2068.                Note that  this is just  the first group of  colors; you can
  2069.                scroll  down through the list  using your arrow  keys or the
  2070.                scroll bar and your mouse.  There are currently 90 different
  2071.                items that you can specify the color for.
  2072.  
  2073.                To change the color of an item, just hit enter.  You will be
  2074.                presented with a table  with all of the available  colors on
  2075.                it.  There will be a white box around the  current color for
  2076.                that item, and you can move  the white box using your  arrow
  2077.                keys or your mouse.   When you have moved the cursor  to the
  2078.                new color, press (enter).  Pressing Esc will leave the color
  2079.                like it was before.
  2080.  
  2081.                Your color  preferences are  stored in the  file COLORS.MGA.
  2082.                If  you ever want to "reset" to  the default colors, you can
  2083.                delete this  file and  run the  reader.   You can  also have
  2084.                multiple  color  files.   See  the  /COLORFILE command  line
  2085.                option for more information.
  2086.  
  2087.  
  2088.  
  2089.  
  2090.  
  2091.  
  2092.  
  2093.                                                                          40
  2094.  
  2095.           Keyboard Macros
  2096.  
  2097.                The   MegaMail(tm)  reader   has  powerful   keyboard  macro
  2098.                facilities built in.  From virtually anywhere in the Reader,
  2099.                you can define a macro or play one back. Also  included is a
  2100.                powerful macro  editor that allows  you to edit  macros that
  2101.                you  have defined.  The  macro facility is  so powerful that
  2102.                you can use it to remap your entire keyboard in the reader.
  2103.  
  2104.                To  define a macro, you  simply press Control-F10.   A small
  2105.                window pops up informing you that "macro recording" has been
  2106.                turned on.  From  this point forward all keys that you press
  2107.                will be  recorded.  You then  perform the task you  want the
  2108.                macro to perform for you later.  When  you are done pressing
  2109.                the keys for  the task,  press Control-F10 again.   At  this
  2110.                time  you will be prompted for the key to assign this macro.
  2111.                After you define  a macro,  whenever you press  the key  you
  2112.                just assigned to the macro, it will be played back.
  2113.  
  2114.                For  example,  if   you  wanted   to  define   a  macro   to
  2115.                automatically "quote"  the first seven lines  from a message
  2116.                when  you are  replying to  a message,  start your  reply by
  2117.                hitting Alt-R and filling  in the message header.   When you
  2118.                are  ready  to  start your  message  with  your  7 lines  of
  2119.                quoting, press Control-F10.  The reader starts "remembering"
  2120.                all the keys you will be pressing from here on in.
  2121.  
  2122.                To quote from the  message, press Alt-W to show  the message
  2123.                you  are replying to.  Block off  the text you want to quote
  2124.                by pressing F7 to begin the block  on the first line, moving
  2125.                the  cursor down  7  lines with  your  down arrow  key,  and
  2126.                pressing F8 to end the block.  Then, return to your reply by
  2127.                pressing  ESC and place the  quoted text into  your reply by
  2128.                pressing Alt-Q.
  2129.  
  2130.                Since you  are now  done recording the  necessary keystrokes
  2131.                for  this  macro,  press  Control-F10  again,  and  you  are
  2132.                prompted for  the key to  assign this macro  to.  You  could
  2133.                press  Control-Q.  From this time  forward, whenever you are
  2134.                replying to a message and you want to quote the beginning of
  2135.                the  message you  are replying  to, you  could  simply press
  2136.                Control-Q and MegaMail(tm) will do the work for you!
  2137.  
  2138.                The following information on Macros is more advanced and may
  2139.                not be of interest to more casual users.
  2140.  
  2141.  
  2142.  
  2143.  
  2144.  
  2145.  
  2146.  
  2147.                                                                          41
  2148.  
  2149.                Redefining your Keyboard using Macros
  2150.  
  2151.                     You can use  MegaMail(tm)'s keyboard macro facility  to
  2152.                     remap  your keyboard.   Let's say that  you didn't like
  2153.                     the  normal begin block and  end block keystrokes.  You
  2154.                     decided that you would  like Alt-B to Begin a  block of
  2155.                     text and Alt-E to End  a block of text.  But,  Alt-E is
  2156.                     already assigned to Enter  a message.  So, you  want to
  2157.                     redefine  Alt-M to  be Enter  a Message.   To  do this,
  2158.                     simply set up three macros : One for Begin a block, one
  2159.                     for End a block, and one for Entering a message.
  2160.  
  2161.                     The  first  macro, Begin  a  block,  is fairly  simple.
  2162.                     Define a macro,  Alt-B, with just  the keystroke F7  in
  2163.                     it. The  second macro is  also simple. Define  a macro,
  2164.                     Alt-E,  with just the keystroke  F8 in it.   (The Alt-E
  2165.                     that you define will  take precedence over the built-in
  2166.                     Alt-E that used to mean Enter a message.)
  2167.  
  2168.                     Now, you must  define a  macro for  leaving a  message.
  2169.                     This  is necessary  because when  you press  Alt-E now,
  2170.                     your new  macro  will be  played  back instead  of  the
  2171.                     reader going into "enter a new message" mode.  Define a
  2172.                     macro with the keystroke  Alt-E in it and assign  it to
  2173.                     Alt-M.
  2174.  
  2175.                     This  setup works  because macros  are not  played back
  2176.                     when they are  part of another macro.  If this were not
  2177.                     true then instead of entering a message with your Alt-M
  2178.                     macro it would end a block. This property of the macros
  2179.                     allows you to completely  redefine your keyboard as you
  2180.                     like, using the same methods described here.
  2181.  
  2182.                     The  only key that  you can't be  redefined is Control-
  2183.                     F10.  This  is  for safety;  as  long  as  you can  hit
  2184.                     Control-F10, you  can eliminate macros (just  record an
  2185.                     "empty"  macro (hit  Control-F10  twice in  a row)  and
  2186.                     assign  it to  the same  key as the  macro you  want to
  2187.                     eliminate). Another feature of the macro engine that is
  2188.                     useful when redefining your  keyboard is the ability to
  2189.                     specify the macro  filename on the  command line.   For
  2190.                     exact  syntax,   see  the  section   on  command   line
  2191.                     parameters.  In short,  this capability  allows you  to
  2192.                     have  several different  sets  of macros  that you  can
  2193.                     choose from when you run the reader.
  2194.  
  2195.  
  2196.  
  2197.  
  2198.  
  2199.  
  2200.  
  2201.                                                                          42
  2202.  
  2203.           The Macro Editor
  2204.  
  2205.                The Reader also has a  built-in macro editor.  You can  edit
  2206.                previously  defined macros with the macro editor, or you can
  2207.                create  new ones.  Go the  Utilities menu  and  select "Edit
  2208.                Macro."    You  will  then be  prompted  for  the  keystroke
  2209.                assigned to the macro that you  wish to edit. When you press
  2210.                the key, a  window will  open up  with the  contents of  the
  2211.                macro inside  it.  For  example, if we wished  to edited our
  2212.                Control-Q macro from above, it would look like this:
  2213.  
  2214.   Edit a Keyboard Macro
  2215.   +================================+
  2216.   | BBS  Read  Utilities           |
  2217.   +============+===============+===+
  2218.       += Macro: <^Q> ================================= Command ==  Insert =+
  2219.       |<AltW><F7><Down><Down><Down><Down><Down><Down><F8><Esc><AltQ><#255> |
  2220.       |                                                                    |
  2221.       |                                                                    |
  2222.       |                                                                    |
  2223.       |                                                                    |
  2224.       |                                                                    |
  2225.       |                                                                    |
  2226.       |                                                                    |
  2227.       |                                                                    |
  2228.       |                                                                    |
  2229.       |                                                                    |
  2230.       |                                                                    |
  2231.       |                                                                    |
  2232.       |                                                                    |
  2233.       +====================================================================+
  2234.  
  2235.                It  should be  noted that you  should never need  to use the
  2236.                macro editor.  If you want to alter a macro, it is easier to
  2237.                simply  record it again and assign it  to the same key.  The
  2238.                macro  editor can, however, be useful for seeing what keys a
  2239.                macro consists of.   Several commands are operational inside
  2240.                the macro editor:
  2241.  
  2242.                     Enter          Quit editing and save changes
  2243.                     Esc            Quit editing and abort changes.
  2244.                     Left Arrow     Move Cursor Left
  2245.                     Right Arrow    Move Cursor Right
  2246.                     Up Arrow       Move Cursor Up
  2247.                     Down           Move cursor Down
  2248.                     Ins            Toggle insert mode on and off
  2249.                     Del            Delete key at cursor
  2250.  
  2251.                The macro editor operates in two modes : Command and Literal
  2252.                (the  current  mode is  displayed  in the  upper  right hand
  2253.                corner  of the macro editor  window.)  In  command mode, the
  2254.                keys above  perform their respective functions.   In Literal
  2255.  
  2256.  
  2257.  
  2258.  
  2259.  
  2260.  
  2261.  
  2262.                                                                          43
  2263.  
  2264.                mode, pressing  the down-arrow  puts a down-arrow  into your
  2265.                macro.    The scroll  lock  key always  toggles  Literal and
  2266.                Command mode.
  2267.  
  2268.  
  2269.  
  2270.  
  2271.  
  2272.  
  2273.  
  2274.                                                                          44
  2275.  
  2276.  
  2277.           Appendix A : Summary of Available Commands
  2278.  
  2279.  
  2280.           While Reading Mail :
  2281.  
  2282.                Right Arrow         Next  message  matching  current  search
  2283.                                    specification.        See   above    for
  2284.                                    information on search specifications.
  2285.  
  2286.                Left Arrow          Previous message matching current search
  2287.                                    specification.        See   above    for
  2288.                                    information on search specifications.
  2289.  
  2290.                Alt-F               Set current search  specification.   See
  2291.                                    above   for    information   on   search
  2292.                                    specification.
  2293.  
  2294.                Alt-C               Clear  the  search specifications.   See
  2295.                                    above   for    information   on   search
  2296.                                    specifications.
  2297.  
  2298.                Alt-U               Search  for  Unread  Mail.    See  above
  2299.                                    section on Personal Read Flags.
  2300.  
  2301.                Alt-Y               Search  for Your mail.   Will  show only
  2302.                                    mail addressed to YOU.
  2303.  
  2304.                Alt-C               Clear the Search  Example.  See  section
  2305.                                    on Searching.
  2306.  
  2307.                Alt-E               Enter Message.   See section on  leaving
  2308.                                    messages.
  2309.  
  2310.                Alt-R               Reply   to  Message.    See  section  on
  2311.                                    leaving messages.
  2312.  
  2313.                Alt-K               Delete Currently Displayed Message.  See
  2314.                                    section on deleting messages.
  2315.  
  2316.                Alt-A               Another  -  gives you  "another" reader.
  2317.                                    See section on "Another Reader"
  2318.  
  2319.                Alt-W               What?!? - Shows you the message that the
  2320.                                    current  message is  referring to.   See
  2321.                                    section on Reverse Threading.
  2322.  
  2323.                Alt-D               DOS shell - Shell to dos from anywhere. 
  2324.  
  2325.                Alt-X               Quick  exit  from  reader, all  personal
  2326.                                    read  flags  are  updated  and  you  are
  2327.                                    returned to DOS.
  2328.  
  2329.  
  2330.  
  2331.  
  2332.  
  2333.  
  2334.  
  2335.                                                                          45
  2336.  
  2337.                Alt-S               Save by writing a copy of a message to a
  2338.                                    text file or printer.   If the text file
  2339.                                    already  exists,  the  message   text  &
  2340.                                    header is  APPENDED  to the  file,  thus
  2341.                                    making  it easy to keep related messages
  2342.                                    together in one file.  
  2343.  
  2344.                Alt-Q               Quick  Scan.    A "quick  scan"  of  ALL
  2345.                                    messages  in  the  reader,  any  message
  2346.                                    could then be selected by pressing ENTER
  2347.                                    or clicking  your mouse.  See section on
  2348.                                    Quick Scan.
  2349.  
  2350.  
  2351.  
  2352.           Commands for  Scrolling Through  Message Text (Both  Entering and
  2353.                Reading Mail)
  2354.  
  2355.                <Up Arrow>          Cursor up one line.
  2356.  
  2357.                <Down Arrow>        Cursor down one line.
  2358.  
  2359.                <Ctrl W>            Scroll display up one line.
  2360.  
  2361.                <Ctrl Z>            Scroll display down one line.
  2362.  
  2363.                <PgUp>              Scroll display up one page.
  2364.  
  2365.                <PgDn>              Scroll display down one page.
  2366.  
  2367.                <Ctrl Home>         Move cursor to top of display.
  2368.  
  2369.                <Ctrl End>          Move cursor to bottom of display. 
  2370.  
  2371.                <Ctrl PgUp>         Move cursor to beginning of message.
  2372.  
  2373.                <Ctrl PgDn>         Move cursor to end of message.
  2374.  
  2375.                <Click Left>        Move cursor to the position indicated by
  2376.                                    the mouse cursor.
  2377.  
  2378.                Alt-Z               "Zooms" the text window - removes header
  2379.                                    from  screen.    Press  Alt-Z  again  to
  2380.                                    return to "normal" mode.
  2381.  
  2382.  
  2383.           Block Commands Active when Reading and Entering Messages:
  2384.  
  2385.           (See below for other block commands for entering message text)
  2386.  
  2387.                Control K,B or F7   Begin  Block  (for writing,  copying, or
  2388.                                    quoting)
  2389.  
  2390.  
  2391.  
  2392.  
  2393.  
  2394.  
  2395.  
  2396.                                                                          46
  2397.  
  2398.                Control K,K or F8   End Block    (for writing,  copying,  or
  2399.                                    quoting)
  2400.  
  2401.                Control K,H         Hide Block
  2402.  
  2403.                Control K,W         Write  Block  (writes  current block  to
  2404.                                    user-specified file name)
  2405.  
  2406.  
  2407.  
  2408.  
  2409.           Commands Active while entering message (replies or new messages)
  2410.  
  2411.                Esc                 Exit message entry, saving if desired.
  2412.  
  2413.                Alt-A               Another  -  gives you  "another" reader.
  2414.                                    See   section    on   "another   reader"
  2415.                                    function.
  2416.  
  2417.                Alt-W               What?!? - Shows you the message that the
  2418.                                    current message is referring to.
  2419.  
  2420.                Alt-D               DOS shell - Shell to dos from anywhere
  2421.  
  2422.                Alt-Q               Quote  message  text.    See  section on
  2423.                                    quoting.
  2424.  
  2425.                Alt-R               "Re-edit" the header of the message.
  2426.  
  2427.                Control K,C         Copy Block (works just like in your word
  2428.                                    processor)
  2429.  
  2430.                Control K,M         Move Block (works just like in your word
  2431.                                    processor)
  2432.  
  2433.                Control K,H         Hide Block (works just like in your word
  2434.                                    processor)
  2435.  
  2436.                Control K,R         Read  Block  (reads  in a  block  from a
  2437.                                    user-specified  file)    Available  only
  2438.                                    when entering message text.
  2439.  
  2440.                <Left Arrow>        Cursor left one character.
  2441.  
  2442.                <Right Arrow>       Cursor right one character.
  2443.  
  2444.                <Ctrl Left Arrow>   Cursor  left one word.  If the cursor is
  2445.                                    at the beginning of  a line, it is moved
  2446.                                    to the end of the previous line.
  2447.  
  2448.  
  2449.  
  2450.  
  2451.  
  2452.  
  2453.  
  2454.                                                                          47
  2455.  
  2456.                <Ctrl Right Arrow>  Cursor right one word.  If the cursor is
  2457.                                    at the end of a line, it is moved to the
  2458.                                    beginning of the following line.
  2459.  
  2460.                <Home>              Cursor to beginning of line.
  2461.  
  2462.                <End>               Cursor to end of line.
  2463.  
  2464.                <Del>               Delete character at cursor.
  2465.  
  2466.                <Backspace>         Delete character to  left of cursor.  If
  2467.                                    the cursor  is  at the  beginning  of  a
  2468.                                    line, the  line will be joined  with the
  2469.                                    previous line.
  2470.  
  2471.                <Ctrl Y>            Delete current line.
  2472.  
  2473.                <Ctrl Q><Y>         Delete from cursor to end of line
  2474.  
  2475.                <Ctrl T>            Delete word to right  of cursor.  If the
  2476.                                    cursor  is   at  end  of   a  line,  the
  2477.                                    following  line  is   joined  with   the
  2478.                                    current line.
  2479.  
  2480.                <Enter>             Start a new line.
  2481.  
  2482.                <Tab>               Move the cursor to the next tab stop. If
  2483.                                    insert mode is on, any text to the right
  2484.                                    of the  cursor is moved to  the right of
  2485.                                    the tab stop.
  2486.  
  2487.                <Ins>               Toggle insert mode on  and off. A  "fat"
  2488.                                    cursor indicates insert  mode; a  "thin"
  2489.                                    cursor indicates overtype mode.
  2490.  
  2491.                <Ctrl O><I>         Toggle  auto-indent mode  on or  off. In
  2492.                                    auto-indent mode, pressing <Enter> while
  2493.                                    in insert mode  will cause the new  line
  2494.                                    inserted  to  have the  same indentation
  2495.                                    level as the previous  line. Auto-indent
  2496.                                    mode also  affects the way that  text is
  2497.                                    formatted when  word wrap occurs  -- the
  2498.                                    new line will have the  same indentation
  2499.                                    level  as the previous line -- and hence
  2500.                                    the   behavior   of   the   reformatting
  2501.                                    commands (<Ctrl B> and <Alt R>).
  2502.  
  2503.  
  2504.  
  2505.  
  2506.  
  2507.  
  2508.  
  2509.                                                                          48
  2510.  
  2511.                <Ctrl O><W>         Toggle word  wrap on and off.  When word
  2512.                                    wrap is  on, any  attempt  to insert  or
  2513.                                    append text beyond the right margin will
  2514.                                    cause   a  new   line  to   be  inserted
  2515.                                    following the current line and all words
  2516.                                    that are  at least partially  beyond the
  2517.                                    right  margin to  be  moved to  the  new
  2518.                                    line.
  2519.  
  2520.                <Ctrl B>            Reformat the current paragraph.
  2521.  
  2522.                <Alt R>             Reformat  the  entire  file.   Use  this
  2523.                                    command with caution.
  2524.  
  2525.                <Ctrl Q><L>         Restore original contents of the current
  2526.                                    line.
  2527.  
  2528.                <Esc>,<Click Right> Quit editing.
  2529.  
  2530.  
  2531.  
  2532.           Commands Active while editing a Header (for Alt-F, Alt-R, and 
  2533.                Alt-E)
  2534.  
  2535.                Tab                 Move to next field.
  2536.  
  2537.                Shift-Tab           Move to previous field
  2538.  
  2539.                Control Enter,PgDn  Done Editing
  2540.  
  2541.                Esc                 Abort Operation
  2542.  
  2543.                Del                 Delete Character Under Cursor
  2544.  
  2545.                Backspace           Delete Character Left of Cursor
  2546.  
  2547.                Ins                 Insert Mode On/Off
  2548.  
  2549.                Control-Y           Clear Current Field
  2550.  
  2551.                Backspace           Backspace
  2552.  
  2553.                Down Arrow          Next Field below current field
  2554.  
  2555.                Up Arrow            Next Field Above current field
  2556.  
  2557.  
  2558.  
  2559.  
  2560.  
  2561.  
  2562.  
  2563.                                                                          49
  2564.  
  2565.           In Security, Read, and Personal Read Fields
  2566.  
  2567.                Space bar,+         Next Choice
  2568.  
  2569.                -                   Prev Choice
  2570.  
  2571.  
  2572.  
  2573.  
  2574.  
  2575.  
  2576.  
  2577.                                                                          50
  2578.  
  2579.           Index
  2580.  
  2581.  
  2582.           (NEW) . . . . . . . . . . . 17     EMS memory  . . . . . . . . 34
  2583.           $I  . . . . . . . . . . . .  7     Enter . . . . . . . . . . . 20
  2584.           /43 . . . . . . . . . . . . 35     Example . . . . . . . . . . 23
  2585.           /50 . . . . . . . . . . . . 35     Exploding windows . . . . .  7
  2586.           /BASENAME . . . . . . . . . 34     Export  . . . . . . . . 14, 15
  2587.           /BIOSSCROLL . . . . . . . . 34     Export function . . . . . . 10
  2588.           /COLORFILE  . . . . . . 35, 39     Export option . . . . . . . 11
  2589.           /CONFIGFILE . . . . . . . . 34     Fatal Error . . . . . . . . 39
  2590.           /EXPORT . . . . . . . . . . 34     From  . . . . . . . . . 17, 28
  2591.           /IMPORT . . . . . . . . . . 34     Help  . . . . . . . . . . . 19
  2592.           /MACROFILE  . . . . . . . . 34     Help Menu . . . . . . . . . 19
  2593.           /MONO . . . . . . . . . . . 33     ID  . . . . . . 10, 14, 16, 27
  2594.           /NOEMS  . . . . . . . . . . 34     Import  . . . . . . . . . . 12
  2595.           /NOMOUSE  . . . . . . . . . 33     Import option . . . . . . . 10
  2596.           /NOSNOW . . . . . . . . . . 34     Imported  . . . . . . . . . 17
  2597.           /NOZIP  . . . . . . . . . . 35     Initial screen  . . . . . .  3
  2598.           /PACK . . . . . . . . . . . 34     Install . . . . . . . . . .  5
  2599.           /SAFTEY . . . . . . . . . . 34     Kill  . . . . . . . . . . . 22
  2600.           Add . . . . . . . . . . . . 10     Last x Messages . . . . 14, 15
  2601.           All New Mail  . . . . . . . 14     Leaving Messages  . . . . . 20
  2602.           Alt-A . . . . . . . . . . . 28     Level . . . . . . . . . . . 16
  2603.           Alt-C . . . . . . . . . . . 24     License Agreement . . . . .  2
  2604.           Alt-E . . . . . . . . . . . 20     Macro Editor  . . . . . . . 42
  2605.           Alt-F . . . . . . . . . . . 23     Macros  . . . . . . . .  40-42
  2606.           Alt-K . . . . . . . . . . . 22     MegaMail(tm) Door . . .  4, 11
  2607.           Alt-Q . . . . . . . 26, 28, 33     MEGAREAD.DOC  . . . . . . .  5
  2608.           Alt-R . . . . . . . . . . . 20     MEGAREAD.EXE  . . . . . . .  5
  2609.           Alt-S . . . . . . . . . . . 25     Mouse . . . . . . . . .  5, 33
  2610.           Alt-U . . . . . . . . . . . 24     Move after Reply  . . . . .  8
  2611.           Alt-W . . . . . . . . . 25, 28     NEW . . . . . . . . . . . . 17
  2612.           Alt-Y . . . . . . . . . . . 24     New  Messages  Marked  as
  2613.           Alt-Z . . . . . . . . . . . 25               Read  . . . . . .  8
  2614.           Another Reader  . . . . . . 28     No Mail . . . . . . . . . . 14
  2615.           Auto Indent Mode  . . . . .  8     Number  . . . . . . . . . . 17
  2616.           BBS . . . . . . . . . . . . 16     Personal Beeper . . . . . .  7
  2617.           Clear . . . . . . . . . . . 24     Personal Read . . . . . . . 18
  2618.           Colors  . . . . . . . . . . 39     Personal Read Flag  . . . . 26
  2619.           Command Line Parameters . . 33     Pick Lists  . . . . . . . .  5
  2620.           Conference  . . . . . . 16, 27     PKUNZIP.EXE . . . . . . . .  5
  2621.           Conference information  . . 13     PKZIP . . . . . . . . . . . 11
  2622.           CONFIG.MGA  . . . . . . . .  6     PKZIP.EXE . . . . . . . . .  5
  2623.           Date  . . . . . . . . . . . 17     Printing  . . . . . . . . . 25
  2624.           Delete Default  . . . . . .  7     Purge/Repair  . . . . . . . 22
  2625.           Deleting Messages . . . . . 22     Quick Scan  . . . . . . . . 26
  2626.           Door  . . . . . . . . . . . 11     Quoting . . . . . . . . . . 32
  2627.           Door text in message  . . .  8     Quoting prefix  . . . . . .  7
  2628.           Download  . . . . . . . . . 11     RAM disk  . . . . . . . . .  8
  2629.           Echo Flag . . . . . . . . . 18     Read  . . . . . . . . . . . 17
  2630.           Editor Right Margin . . . .  8     READER.REG  . . . . . . . .  5
  2631.  
  2632.  
  2633.  
  2634.  
  2635.  
  2636.  
  2637.  
  2638.                                                                          51
  2639.  
  2640.           Reading Mail  . . . . . . . 16
  2641.           Reference . . . . . . . . . 17
  2642.           Register  . . . . . . . . .  3
  2643.           Registering . . . . . . . .  3
  2644.           Repair/Purge option . . . . 36
  2645.           Repairing   and   Purging
  2646.                     Mail  . . . . . . 36
  2647.           Reply . . . . . . . . . 20, 32
  2648.           Reverse" Threading  . . . . 25
  2649.           Saving  . . . . . . . . . . 25
  2650.           Search specification  . . . 23
  2651.           Searching . . . . . . . . . 23
  2652.           Security  . . . . . . . . . 17
  2653.           Shareware . . . . . . . . .  3
  2654.           Start  Reading Mail  in a
  2655.                     Conference  . . . 15
  2656.           Subj  . . . . . . . . . . . 17
  2657.           Subject . . . . . . . . 17, 28
  2658.           Tag Lines . . . . . . . 21, 22
  2659.           The MegaMail(tm) Cycle  . . 10
  2660.           The MegaMail(tm) System . .  4
  2661.           Time  . . . . . . . . . . . 17
  2662.           To  . . . . . . . . . . 17, 28
  2663.           Unread Scan . . . . . . . .  7
  2664.           Update    Personal   Read
  2665.                     Flags . . . . . . 26
  2666.           Upload  . . . . . . . . . . 11
  2667.           UTI technology  . . . . . .  4
  2668.           Wordstar commands . . . . . 21
  2669.           YOU . . . . . . . . . . . . 17
  2670.           Your  Mail  from  Last  x
  2671.                     Messages  . . . . 14
  2672.           Your New Mail . . . . . . . 14
  2673.           ZMODEM  . . . . . . . . . .  5
  2674.           Zoom  . . . . . . . . . . . 25
  2675.