If you use a FX001 or FX001D please use the 116.exe driver
If you have a FX001DE or a FX300 use the ide.zip driver
When you still have a LU005 (mechanical door) the driver 23.exe
For windows NT 3.1 please use MTMNT111.EXE
For an interface card with the description 7110 on it for fx001d please
use the 7110.zip driver.
Close and eject are two small utilities fron Totronik for FX serie of
CD-rom drives.
For OS/2 please use the file warpfx.exe for fx300 or fx400
For other fx drives please use mitfx.exe.
For windows NT 3.5 ex Daytona the drivers are inclusive in the system.
The file mscdex.zip is a text file for people interrested by mscdex.exe and the command.
Please note this is a Microsoft file from Compuserve and NO SUPPORT from Mitsumi.
HOW TO USE THIS DISK.
SIMPLY EXPLODE THE DRIVER THAT YOU NEED BY TYPING THE NAME IF IT IS AN EXE FILE OR WRITE PKUNZIP AND THE NAME OF THE COMPRESS FILE AND THEN RUN SETUPOR SETUPD FOR FX DRIVES.
FOLLOW THE INSTRUCTIONS FROM YOUR OPERATING SYSTEM FOR MORE INFORMATIONS.
FOR MORE MITSUMI PRODUCTS PLEASE CALL YOU DISTRIBUTOR DEALER.
THE LIST IS CALLED DISTRI.DOC. PLEASE READ IT USING WORD FOR WINDOWS.
GENERAL NOTES
MITSUMI ATAPI CD-ROM DEVICE DRIVERS.
MICROSOFT DOS driver
Version 1.21A for IDE Atapi MITSUMI CD-ROM MODEL FX001DE, FX300 and FX 400
Just run SETUPD and follow the on-screen instructions.
IBM OS/2 WARP DRIVER
Version 1.0 for IDE Atapi MITSUMI CD-ROM MODEL FX001DE, FX300 and FX 400
This is an IBM driver delivered as is from MITSUMI under agreement with IBM
Corporation.
The latest version of this driver is also on Compuserve under the name of
ATAPI.ZIP in the IBM OS/2 SUPPORT FORUM, IBM FILES .
Please follow the instructions in the readme file for installation.
MICROSOFT WINDOWS NT
There is no driver for WINDOWS NT 3.1, please upgrade to WINDOWS NT 3.5
For WINDOWS NT 3.5 (ex Daytona) the drivers for the MITSUMI are already
in the Operating system.
If you install WINDOWS NT 3.5 for the first time and a MITSUMI ATAPI CD-ROM is
already connected , it will be automatically recognized and installed.
If you have already installed WINDOWS NT 3.5, please select in the setup SCSI
adapter (YES , SCSI...) and select MITSUMI ATAPI CD-ROM.
For more information please read your Windows NT manual or call Microsoft
for technical support.
DRIVER UPDATES via Mail Box (IN GERMANY)
The latest drivers are on Compuserve up loaded into the CD-ROM FORUM,
VOBIS FORUM,as well as in various Mail boxes.
Example : VOBIS AT 02405 94047
02405 180677
02405 410331
02405 410332
02405 410333
: QUME AT 0211 591047
TECHNICAL SUPPORT
Please contact first your dealer before calling MITSUMI
For installation you DON'T need an enhanced controller but for people who
have already 2 HDD in the system, Mitsumi is also selling a small IDE
controller type MTM2183 with audio connectors.
SPARE PARTS PURCHASING
Since we realize problems for end-users to buy parts like cables, interface cards,
and so on, Mitsumi establishes a system for en user to gets parts. The Fax number
is 02131 278669 or from Germany in 49 2131 278669.
All trade names are protected under trademarks of their respective companies.