home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Inside Multimedia 1995 August
/
IMM0895.BIN
/
driver
/
ati
/
mach64
/
disk2
/
drvrnote.lzh
/
ONLINE.USD
< prev
next >
Wrap
Text File
|
1994-07-12
|
2KB
|
46 lines
MicroStation 4.0 Display Driver
***********************************************************************
READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT !
You must run QUICK SETUP from the Main Menu and select an appropriate
monitor type, prior to installing the MicroStation Display Driver.
IMPORTANT: This driver is intended for use with MicroStation 4.0 only.
****************************
1.0 Installation Notes for MicroStation 4.0
1) Make sure MicroStation has already been installed on your hard drive.
2) To complete the install successfully, you will require the following
information:
a) The full path name of the MicroStation directory.
3) From the Install Enhanced Drivers menu select MicroStation.
4) When INSTALL has completed copying all necessary files, exit the
program.
5) Reboot the system (if you allowed INSTALL to modify autoexec.bat). If
you have created a batch file for the set environment, run the .BAT file.
6) Change directory to the MicroStation subdirectory and run USCONFIG.EXE.
7) Select Display Adaptor, then Vendor Supplied driver from the menu.
8) Select ATI MicroStation v2.3.1 Left or Right (depending on your system's
configuration)
9) Press enter to pass the Vibrant Graphics screen, and select ATI
Graphics PROTURBO from the list of graphic displays.
10) Refer to the README.USD file for further information regarding how to
use the enhanced features. This readme file is copied to the
MicroStation DRIVERS subdirectory during the drivers install.