home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Frozen Fish 1: Amiga
/
FrozenFish-Apr94.iso
/
bbs
/
gnu
/
gdb-4.12.tar.gz
/
gdb-4.12.tar
/
gdb-4.12
/
bfd
/
bfd-in2.h
< prev
next >
Wrap
C/C++ Source or Header
|
1994-02-03
|
68KB
|
2,005 lines
/* Main header file for the bfd library -- portable access to object files.
Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Contributed by Cygnus Support.
** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them;
** instead, change bfd-in.h or the other BFD source files processed to
** generate these files.
This file is part of BFD, the Binary File Descriptor library.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* bfd.h -- The only header file required by users of the bfd library
The bfd.h file is generated from bfd-in.h and various .c files; if you
change it, your changes will probably be lost.
All the prototypes and definitions following the comment "THE FOLLOWING
IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
BFD. If you change it, someone oneday will extract it from the source
again, and your changes will be lost. To save yourself from this bind,
change the definitions in the source in the bfd directory. Type "make
docs" and then "make headers" in that directory, and magically this file
will change to reflect your changes.
If you don't have the tools to perform the extraction, then you are
safe from someone on your system trampling over your header files.
You should still maintain the equivalence between the source and this
file though; every change you make to the .c file should be reflected
here. */
#ifndef __BFD_H_SEEN__
#define __BFD_H_SEEN__
#include "ansidecl.h"
#include "obstack.h"
#define BFD_VERSION "2.2"
#define BFD_ARCH_SIZE @WORDSIZE@
#if BFD_ARCH_SIZE >= 64
#define BFD64
#endif
#ifndef INLINE
#if __GNUC__ >= 2
#define INLINE __inline__
#else
#define INLINE
#endif
#endif
/* 64-bit type definition (if any) from bfd's sysdep.h goes here */
/* forward declaration */
typedef struct _bfd bfd;
/* To squelch erroneous compiler warnings ("illegal pointer
combination") from the SVR3 compiler, we would like to typedef
boolean to int (it doesn't like functions which return boolean.
Making sure they are never implicitly declared to return int
doesn't seem to help). But this file is not configured based on
the host. */
/* General rules: functions which are boolean return true on success
and false on failure (unless they're a predicate). -- bfd.doc */
/* I'm sure this is going to break something and someone is going to
force me to change it. */
/* typedef enum boolean {false, true} boolean; */
/* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */
/* It gets worse if the host also defines a true/false enum... -sts */
#ifndef TRUE_FALSE_ALREADY_DEFINED
typedef enum bfd_boolean {false, true} boolean;
#define BFD_TRUE_FALSE
#else
typedef enum bfd_boolean {bfd_false, bfd_true} boolean;
#endif
/* A pointer to a position in a file. */
/* FIXME: This should be using off_t from <sys/types.h>.
For now, try to avoid breaking stuff by not including <sys/types.h> here.
This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
Probably the best long-term answer is to avoid using file_ptr AND off_t
in this header file, and to handle this in the BFD implementation
rather than in its interface. */
/* typedef off_t file_ptr; */
typedef long int file_ptr;
/* Support for different sizes of target format ints and addresses. If the
host implements 64-bit values, it defines HOST_64_BIT to be the appropriate
type. Otherwise, this code will fall back on gcc's "long long" type if gcc
is being used. HOST_64_BIT must be defined in such a way as to be a valid
type name by itself or with "unsigned" prefixed. It should be a signed
type by itself.
If neither is the case, then compilation will fail if 64-bit targets are
requested. If you don't request any 64-bit targets, you should be safe. */
#ifdef BFD64
#if defined (__GNUC__) && !defined (HOST_64_BIT)
#define HOST_64_BIT long long
typedef HOST_64_BIT int64_type;
typedef unsigned HOST_64_BIT uint64_type;
#endif
#if !defined (uint64_type) && defined (__GNUC__)
#define uint64_type unsigned long long
#define int64_type long long
#define uint64_typeLOW(x) ((unsigned long)(((x) & 0xffffffff)))
#define uint64_typeHIGH(x) ((unsigned long)(((x) >> 32) & 0xffffffff))
#endif
typedef unsigned HOST_64_BIT bfd_vma;
typedef HOST_64_BIT bfd_signed_vma;
typedef unsigned HOST_64_BIT bfd_size_type;
typedef unsigned HOST_64_BIT symvalue;
#define fprintf_vma(s,x) \
fprintf(s,"%08lx%08lx", uint64_typeHIGH(x), uint64_typeLOW(x))
#define sprintf_vma(s,x) \
sprintf(s,"%08lx%08lx", uint64_typeHIGH(x), uint64_typeLOW(x))
#else /* not BFD64 */
/* Represent a target address. Also used as a generic unsigned type
which is guaranteed to be big enough to hold any arithmetic types
we need to deal with. */
typedef unsigned long bfd_vma;
/* A generic signed type which is guaranteed to be big enough to hold any
arithmetic types we need to deal with. Can be assumed to be compatible
with bfd_vma in the same way that signed and unsigned ints are compatible
(as parameters, in assignment, etc). */
typedef long bfd_signed_vma;
typedef unsigned long symvalue;
typedef unsigned long bfd_size_type;
/* Print a bfd_vma x on stream s. */
#define fprintf_vma(s,x) fprintf(s, "%08lx", x)
#define sprintf_vma(s,x) sprintf(s, "%08lx", x)
#endif /* not BFD64 */
#define printf_vma(x) fprintf_vma(stdout,x)
typedef unsigned int flagword; /* 32 bits of flags */
/** File formats */
typedef enum bfd_format {
bfd_unknown = 0, /* file format is unknown */
bfd_object, /* linker/assember/compiler output */
bfd_archive, /* object archive file */
bfd_core, /* core dump */
bfd_type_end} /* marks the end; don't use it! */
bfd_format;
/* Values that may appear in the flags field of a BFD. These also
appear in the object_flags field of the bfd_target structure, where
they indicate the set of flags used by that backend (not all flags
are meaningful for all object file formats) (FIXME: at the moment,
the object_flags values have mostly just been copied from backend
to another, and are not necessarily correct). */
/* No flags. */
#define NO_FLAGS 0x00
/* BFD contains relocation entries. */
#define HAS_RELOC 0x01
/* BFD is directly executable. */
#define EXEC_P 0x02
/* BFD has line number information (basically used for F_LNNO in a
COFF header). */
#define HAS_LINENO 0x04
/* BFD has debugging information. */
#define HAS_DEBUG 0x08
/* BFD has symbols. */
#define HAS_SYMS 0x10
/* BFD has local symbols (basically used for F_LSYMS in a COFF
header). */
#define HAS_LOCALS 0x20
/* BFD is a dynamic object. */
#define DYNAMIC 0x40
/* Text section is write protected (if D_PAGED is not set, this is
like an a.out NMAGIC file) (the linker sets this by default, but
clears it for -r or -N). */
#define WP_TEXT 0x80
/* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
linker sets this by default, but clears it for -r or -n or -N). */
#define D_PAGED 0x100
/* BFD is relaxable (this means that bfd_relax_section may be able to
do something). */
#define BFD_IS_RELAXABLE 0x200
/* symbols and relocation */
typedef unsigned long symindex;
#define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
typedef enum bfd_symclass {
bfd_symclass_unknown = 0,
bfd_symclass_fcommon, /* fortran common symbols */
bfd_symclass_global, /* global symbol, what a surprise */
bfd_symclass_debugger, /* some debugger symbol */
bfd_symclass_undefined /* none known */
} symclass;
/* general purpose part of a symbol;
target specific parts will be found in libcoff.h, liba.out.h etc */
#define bfd_get_section(x) ((x)->section)
#define bfd_get_output_section(x) ((x)->section->output_section)
#define bfd_set_section(x,y) ((x)->section) = (y)
#define bfd_asymbol_base(x) ((x)->section->vma)
#define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value)
#define bfd_asymbol_name(x) ((x)->name)
/*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
#define bfd_asymbol_bfd(x) ((x)->the_bfd)
#define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
/* This is a type pun with struct ranlib on purpose! */
typedef struct carsym {
char *name;
file_ptr file_offset; /* look here to find the file */
} carsym; /* to make these you call a carsymogen */
/* Used in generating armaps. Perhaps just a forward definition would do? */
struct orl { /* output ranlib */
char **name; /* symbol name */
file_ptr pos; /* bfd* or file position */
int namidx; /* index into string table */
};
/* Linenumber stuff */
typedef struct lineno_cache_entry {
unsigned int line_number; /* Linenumber from start of function*/
union {
struct symbol_cache_entry *sym; /* Function name */
unsigned long offset; /* Offset into section */
} u;
} alent;
/* object and core file sections */
#define align_power(addr, align) \
( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
typedef struct sec *sec_ptr;
#define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
#define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
#define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
#define bfd_section_name(bfd, ptr) ((ptr)->name)
#define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
#define bfd_section_vma(bfd, ptr) ((ptr)->vma)
#define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power)
#define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0)
#define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata)
#define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = true), true)
#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
typedef struct stat stat_type;
/* Error handling */
typedef enum bfd_error
{
no_error = 0,
system_call_error,
invalid_target,
wrong_format,
invalid_operation,
no_memory,
no_symbols,
no_relocation_info,
no_more_archived_files,
malformed_archive,
symbol_not_found,
file_not_recognized,
file_ambiguously_recognized,
no_contents,
bfd_error_nonrepresentable_section,
no_debug_section,
bad_value,
file_truncated,
invalid_error_code
} bfd_ec;
extern bfd_ec bfd_error;
CONST char *bfd_errmsg PARAMS ((bfd_ec error_tag));
void bfd_perror PARAMS ((CONST char *message));
typedef enum bfd_print_symbol
{
bfd_print_symbol_name,
bfd_print_symbol_more,
bfd_print_symbol_all
} bfd_print_symbol_type;
/* Information about a symbol that nm needs. */
typedef struct _symbol_info
{
symvalue value;
char type; /* */
CONST char *name; /* Symbol name. */
char stab_other; /* Unused. */
short stab_desc; /* Info for N_TYPE. */
CONST char *stab_name;
} symbol_info;
/* Hash table routines. There is no way to free up a hash table. */
/* An element in the hash table. Most uses will actually use a larger
structure, and an instance of this will be the first field. */
struct bfd_hash_entry
{
/* Next entry for this hash code. */
struct bfd_hash_entry *next;
/* String being hashed. */
const char *string;
/* Hash code. This is the full hash code, not the index into the
table. */
unsigned long hash;
};
/* A hash table. */
struct bfd_hash_table
{
/* The hash array. */
struct bfd_hash_entry **table;
/* The number of slots in the hash table. */
unsigned int size;
/* A function used to create new elements in the hash table. The
first entry is itself a pointer to an element. When this
function is first invoked, this pointer will be NULL. However,
having the pointer permits a hierarchy of method functions to be
built each of which calls the function in the superclass. Thus
each function should be written to allocate a new block of memory
only if the argument is NULL. */
struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *,
struct bfd_hash_table *,
const char *));
/* An obstack for this hash table. */
struct obstack memory;
};
/* Initialize a hash table. */
extern boolean bfd_hash_table_init
PARAMS ((struct bfd_hash_table *,
struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
struct bfd_hash_table *,
const char *)));
/* Initialize a hash table specifying a size. */
extern boolean bfd_hash_table_init_n
PARAMS ((struct bfd_hash_table *,
struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
struct bfd_hash_table *,
const char *),
unsigned int size));
/* Free up a hash table. */
extern void bfd_hash_table_free PARAMS ((struct bfd_hash_table *));
/* Look up a string in a hash table. If CREATE is true, a new entry
will be created for this string if one does not already exist. The
COPY argument must be true if this routine should copy the string
into newly allocated memory when adding an entry. */
extern struct bfd_hash_entry *bfd_hash_lookup
PARAMS ((struct bfd_hash_table *, const char *, boolean create,
boolean copy));
/* Base method for creating a hash table entry. */
extern struct bfd_hash_entry *bfd_hash_newfunc
PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *,
const char *));
/* Grab some space for a hash table entry. */
extern PTR bfd_hash_allocate PARAMS ((struct bfd_hash_table *,
unsigned int));
/* Traverse a hash table in a random order, calling a function on each
element. If the function returns false, the traversal stops. The
INFO argument is passed to the function. */
extern void bfd_hash_traverse PARAMS ((struct bfd_hash_table *,
boolean (*) (struct bfd_hash_entry *,
PTR),
PTR info));
/* The code that implements targets can initialize a jump table with this
macro. It must name all its routines the same way (a prefix plus
the standard routine suffix), or it must #define the routines that
are not so named, before calling JUMP_TABLE in the initializer. */
/* Semi-portable string concatenation in cpp.
The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
The problem is, "32_" is not a valid preprocessing token, and we don't
want extra underscores (e.g., "nlm_32_"). The XCAT2 macro will cause the
inner CAT macros to be evaluated first, producing still-valid pp-tokens.
Then the final concatenation can be done. (Sigh.) */
#ifndef CAT
#ifdef SABER
#define CAT(a,b) a##b
#define CAT3(a,b,c) a##b##c
#define CAT4(a,b,c,d) a##b##c##d
#else
#if defined(__STDC__) || defined(ALMOST_STDC)
#define CAT(a,b) a##b
#define CAT3(a,b,c) a##b##c
#define XCAT2(a,b) CAT(a,b)
#define CAT4(a,b,c,d) XCAT2(CAT(a,b),CAT(c,d))
#else
#define CAT(a,b) a/**/b
#define CAT3(a,b,c) a/**/b/**/c
#define CAT4(a,b,c,d) a/**/b/**/c/**/d
#endif
#endif
#endif
#define JUMP_TABLE(NAME)\
CAT(NAME,_core_file_failing_command),\
CAT(NAME,_core_file_failing_signal),\
CAT(NAME,_core_file_matches_executable_p),\
CAT(NAME,_slurp_armap),\
CAT(NAME,_slurp_extended_name_table),\
CAT(NAME,_truncate_arname),\
CAT(NAME,_write_armap),\
CAT(NAME,_close_and_cleanup),\
CAT(NAME,_set_section_contents),\
CAT(NAME,_get_section_contents),\
CAT(NAME,_new_section_hook),\
CAT(NAME,_get_symtab_upper_bound),\
CAT(NAME,_get_symtab),\
CAT(NAME,_get_reloc_upper_bound),\
CAT(NAME,_canonicalize_reloc),\
CAT(NAME,_make_empty_symbol),\
CAT(NAME,_print_symbol),\
CAT(NAME,_get_symbol_info),\
CAT(NAME,_get_lineno),\
CAT(NAME,_set_arch_mach),\
CAT(NAME,_openr_next_archived_file),\
CAT(NAME,_find_nearest_line),\
CAT(NAME,_generic_stat_arch_elt),\
CAT(NAME,_sizeof_headers),\
CAT(NAME,_bfd_debug_info_start),\
CAT(NAME,_bfd_debug_info_end),\
CAT(NAME,_bfd_debug_info_accumulate),\
CAT(NAME,_bfd_get_relocated_section_contents),\
CAT(NAME,_bfd_relax_section),\
CAT(NAME,_bfd_reloc_type_lookup),\
CAT(NAME,_bfd_make_debug_symbol),\
CAT(NAME,_bfd_link_hash_table_create),\
CAT(NAME,_bfd_link_add_symbols),\
CAT(NAME,_bfd_final_link)
#define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
/* User program access to BFD facilities */
/* Cast from const char * to char * so that caller can assign to
a char * without a warning. */
#define bfd_get_filename(abfd) ((char *) (abfd)->filename)
#define bfd_get_cacheable(abfd) ((abfd)->cacheable)
#define bfd_get_format(abfd) ((abfd)->format)
#define bfd_get_target(abfd) ((abfd)->xvec->name)
#define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
#define bfd_get_file_flags(abfd) ((abfd)->flags)
#define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags)
#define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
#define bfd_my_archive(abfd) ((abfd)->my_archive)
#define bfd_has_map(abfd) ((abfd)->has_armap)
#define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
#define bfd_usrdata(abfd) ((abfd)->usrdata)
#define bfd_get_start_address(abfd) ((abfd)->start_address)
#define bfd_get_symcount(abfd) ((abfd)->symcount)
#define bfd_get_outsymbols(abfd) ((abfd)->outsymbols)
#define bfd_count_sections(abfd) ((abfd)->section_count)
#define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
#define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (bool)), true)
/* Byte swapping routines. */
bfd_vma bfd_getb64 PARAMS ((const unsigned char *));
bfd_vma bfd_getl64 PARAMS ((const unsigned char *));
bfd_signed_vma bfd_getb_signed_64 PARAMS ((const unsigned char *));
bfd_signed_vma bfd_getl_signed_64 PARAMS ((const unsigned char *));
bfd_vma bfd_getb32 PARAMS ((const unsigned char *));
bfd_vma bfd_getl32 PARAMS ((const unsigned char *));
bfd_signed_vma bfd_getb_signed_32 PARAMS ((const unsigned char *));
bfd_signed_vma bfd_getl_signed_32 PARAMS ((const unsigned char *));
bfd_vma bfd_getb16 PARAMS ((const unsigned char *));
bfd_vma bfd_getl16 PARAMS ((const unsigned char *));
bfd_signed_vma bfd_getb_signed_16 PARAMS ((const unsigned char *));
bfd_signed_vma bfd_getl_signed_16 PARAMS ((const unsigned char *));
void bfd_putb64 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl64 PARAMS ((bfd_vma, unsigned char *));
void bfd_putb32 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl32 PARAMS ((bfd_vma, unsigned char *));
void bfd_putb16 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl16 PARAMS ((bfd_vma, unsigned char *));
/* ECOFF linking routines. */
#if defined(__STDC__) || defined(ALMOST_STDC)
struct ecoff_debug_info;
struct ecoff_debug_swap;
struct ecoff_extr;
struct symbol_cache_entry;
struct bfd_link_info;
#endif
extern PTR bfd_ecoff_debug_init
PARAMS ((bfd *output_bfd, struct ecoff_debug_info *output_debug,
const struct ecoff_debug_swap *output_swap,
struct bfd_link_info *));
extern void bfd_ecoff_debug_free
PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
const struct ecoff_debug_swap *output_swap,
struct bfd_link_info *));
extern boolean bfd_ecoff_debug_accumulate
PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
const struct ecoff_debug_swap *output_swap,
bfd *input_bfd, struct ecoff_debug_info *input_debug,
const struct ecoff_debug_swap *input_swap,
struct bfd_link_info *));
extern boolean bfd_ecoff_debug_accumulate_other
PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
const struct ecoff_debug_swap *output_swap, bfd *input_bfd,
struct bfd_link_info *));
extern boolean bfd_ecoff_debug_externals
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
const struct ecoff_debug_swap *swap,
boolean relocateable,
boolean (*get_extr) (struct symbol_cache_entry *,
struct ecoff_extr *),
void (*set_index) (struct symbol_cache_entry *,
bfd_size_type)));
extern boolean bfd_ecoff_debug_one_external
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
const struct ecoff_debug_swap *swap,
const char *name, struct ecoff_extr *esym));
extern bfd_size_type bfd_ecoff_debug_size
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
const struct ecoff_debug_swap *swap));
extern boolean bfd_ecoff_write_debug
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
const struct ecoff_debug_swap *swap, file_ptr where));
extern boolean bfd_ecoff_write_accumulated_debug
PARAMS ((PTR handle, bfd *abfd, struct ecoff_debug_info *debug,
const struct ecoff_debug_swap *swap,
struct bfd_link_info *info, file_ptr where));
/* And more from the source. */
void
bfd_init PARAMS ((void));
bfd *
bfd_openr PARAMS ((CONST char *filename, CONST char *target));
bfd *
bfd_fdopenr PARAMS ((CONST char *filename, CONST char *target, int fd));
bfd *
bfd_openw PARAMS ((CONST char *filename, CONST char *target));
boolean
bfd_close PARAMS ((bfd *abfd));
boolean
bfd_close_all_done PARAMS ((bfd *));
bfd_size_type
bfd_alloc_size PARAMS ((bfd *abfd));
bfd *
bfd_create PARAMS ((CONST char *filename, bfd *templ));
/* Byte swapping macros for user section data. */
#define bfd_put_8(abfd, val, ptr) \
(*((unsigned char *)(ptr)) = (unsigned char)(val))
#define bfd_put_signed_8 \
bfd_put_8
#define bfd_get_8(abfd, ptr) \
(*(unsigned char *)(ptr))
#define bfd_get_signed_8(abfd, ptr) \
((*(unsigned char *)(ptr) ^ 0x80) - 0x80)
#define bfd_put_16(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
#define bfd_put_signed_16 \
bfd_put_16
#define bfd_get_16(abfd, ptr) \
BFD_SEND(abfd, bfd_getx16, (ptr))
#define bfd_get_signed_16(abfd, ptr) \
BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
#define bfd_put_32(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx32, ((val),(ptr)))
#define bfd_put_signed_32 \
bfd_put_32
#define bfd_get_32(abfd, ptr) \
BFD_SEND(abfd, bfd_getx32, (ptr))
#define bfd_get_signed_32(abfd, ptr) \
BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
#define bfd_put_64(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx64, ((val), (ptr)))
#define bfd_put_signed_64 \
bfd_put_64
#define bfd_get_64(abfd, ptr) \
BFD_SEND(abfd, bfd_getx64, (ptr))
#define bfd_get_signed_64(abfd, ptr) \
BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
/* Byte swapping macros for file header data. */
#define bfd_h_put_8(abfd, val, ptr) \
bfd_put_8 (abfd, val, ptr)
#define bfd_h_put_signed_8(abfd, val, ptr) \
bfd_put_8 (abfd, val, ptr)
#define bfd_h_get_8(abfd, ptr) \
bfd_get_8 (abfd, ptr)
#define bfd_h_get_signed_8(abfd, ptr) \
bfd_get_signed_8 (abfd, ptr)
#define bfd_h_put_16(abfd, val, ptr) \
BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
#define bfd_h_put_signed_16 \
bfd_h_put_16
#define bfd_h_get_16(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx16,(ptr))
#define bfd_h_get_signed_16(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
#define bfd_h_put_32(abfd, val, ptr) \
BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
#define bfd_h_put_signed_32 \
bfd_h_put_32
#define bfd_h_get_32(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx32,(ptr))
#define bfd_h_get_signed_32(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
#define bfd_h_put_64(abfd, val, ptr) \
BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
#define bfd_h_put_signed_64 \
bfd_h_put_64
#define bfd_h_get_64(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx64,(ptr))
#define bfd_h_get_signed_64(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
typedef struct sec
{
/* The name of the section; the name isn't a copy, the pointer is
the same as that passed to bfd_make_section. */
CONST char *name;
/* Which section is it; 0..nth. */
int index;
/* The next section in the list belonging to the BFD, or NULL. */
struct sec *next;
/* The field flags contains attributes of the section. Some
flags are read in from the object file, and some are
synthesized from other information. */
flagword flags;
#define SEC_NO_FLAGS 0x000
/* Tells the OS to allocate space for this section when loading.
This is clear for a section containing debug information
only. */
#define SEC_ALLOC 0x001
/* Tells the OS to load the section from the file when loading.
This is clear for a .bss section. */
#define SEC_LOAD 0x002
/* The section contains data still to be relocated, so there is
some relocation information too. */
#define SEC_RELOC 0x004
#if 0 /* Obsolete ? */
#define SEC_BALIGN 0x008
#endif
/* A signal to the OS that the section contains read only
data. */
#define SEC_READONLY 0x010
/* The section contains code only. */
#define SEC_CODE 0x020
/* The section contains data only. */
#define SEC_DATA 0x040
/* The section will reside in ROM. */
#define SEC_ROM 0x080
/* The section contains constructor information. This section
type is used by the linker to create lists of constructors and
destructors used by <<g++>>. When a back end sees a symbol
which should be used in a constructor list, it creates a new
section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
the symbol to it, and builds a relocation. To build the lists
of constructors, all the linker has to do is catenate all the
sections called <<__CTOR_LIST__>> and relocate the data
contained within - exactly the operations it would peform on
standard data. */
#define SEC_CONSTRUCTOR 0x100
/* The section is a constuctor, and should be placed at the
end of the text, data, or bss section(?). */
#define SEC_CONSTRUCTOR_TEXT 0x1100
#define SEC_CONSTRUCTOR_DATA 0x2100
#define SEC_CONSTRUCTOR_BSS 0x3100
/* The section has contents - a data section could be
<<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
<<SEC_HAS_CONTENTS>> */
#define SEC_HAS_CONTENTS 0x200
/* An instruction to the linker to not output the section
even if it has information which would normally be written. */
#define SEC_NEVER_LOAD 0x400
/* The section is a shared library section. The linker must leave
these completely alone, as the vma and size are used when
the executable is loaded. */
#define SEC_SHARED_LIBRARY 0x800
/* The section is a common section (symbols may be defined
multiple times, the value of a symbol is the amount of
space it requires, and the largest symbol value is the one
used). Most targets have exactly one of these (which we
translate to bfd_com_section), but ECOFF has two. */
#define SEC_IS_COMMON 0x8000
/* The section contains only debugging information. For
example, this is set for ELF .debug and .stab sections.
strip tests this flag to see if a section can be
discarded. */
#define SEC_DEBUGGING 0x10000
/* End of section flags. */
/* The virtual memory address of the section - where it will be
at run time. The symbols are relocated against this. The
user_set_vma flag is maintained by bfd; if it's not set, the
backend can assign addresses (for example, in <<a.out>>, where
the default address for <<.data>> is dependent on the specific
target and various flags). */
bfd_vma vma;
boolean user_set_vma;
/* The load address of the section - where it would be in a
rom image; really only used for writing section header
information. */
bfd_vma lma;
/* The size of the section in bytes, as it will be output.
contains a value even if the section has no contents (e.g., the
size of <<.bss>>). This will be filled in after relocation */
bfd_size_type _cooked_size;
/* The original size on disk of the section, in bytes. Normally this
value is the same as the size, but if some relaxing has
been done, then this value will be bigger. */
bfd_size_type _raw_size;
/* If this section is going to be output, then this value is the
offset into the output section of the first byte in the input
section. E.g., if this was going to start at the 100th byte in
the output section, this value would be 100. */
bfd_vma output_offset;
/* The output section through which to map on output. */
struct sec *output_section;
/* The alignment requirement of the section, as an exponent of 2 -
e.g., 3 aligns to 2^3 (or 8). */
unsigned int alignment_power;
/* If an input section, a pointer to a vector of relocation
records for the data in this section. */
struct reloc_cache_entry *relocation;
/* If an output section, a pointer to a vector of pointers to
relocation records for the data in this section. */
struct reloc_cache_entry **orelocation;
/* The number of relocation records in one of the above */
unsigned reloc_count;
/* Information below is back end specific - and not always used
or updated. */
/* File position of section data */
file_ptr filepos;
/* File position of relocation info */
file_ptr rel_filepos;
/* File position of line data */
file_ptr line_filepos;
/* Pointer to data for applications */
PTR userdata;
struct lang_output_section *otheruserdata;
/* Attached line number information */
alent *lineno;
/* Number of line number records */
unsigned int lineno_count;
/* When a section is being output, this value changes as more
linenumbers are written out */
file_ptr moving_line_filepos;
/* What the section number is in the target world */
int target_index;
PTR used_by_bfd;
/* If this is a constructor section then here is a list of the
relocations created to relocate items within it. */
struct relent_chain *constructor_chain;
/* The BFD which owns the section. */
bfd *owner;
boolean reloc_done;
/* A symbol which points at this section only */
struct symbol_cache_entry *symbol;
struct symbol_cache_entry **symbol_ptr_ptr;
struct bfd_link_order *link_order_head;
struct bfd_link_order *link_order_tail;
} asection ;
/* These sections are global, and are managed by BFD. The application
and target back end are not permitted to change the values in
these sections. */
#define BFD_ABS_SECTION_NAME "*ABS*"
#define BFD_UND_SECTION_NAME "*UND*"
#define BFD_COM_SECTION_NAME "*COM*"
#define BFD_IND_SECTION_NAME "*IND*"
/* the absolute section */
extern asection bfd_abs_section;
/* Pointer to the undefined section */
extern asection bfd_und_section;
/* Pointer to the common section */
extern asection bfd_com_section;
/* Pointer to the indirect section */
extern asection bfd_ind_section;
extern struct symbol_cache_entry *bfd_abs_symbol;
extern struct symbol_cache_entry *bfd_com_symbol;
extern struct symbol_cache_entry *bfd_und_symbol;
extern struct symbol_cache_entry *bfd_ind_symbol;
#define bfd_get_section_size_before_reloc(section) \
(section->reloc_done ? (abort(),1): (section)->_raw_size)
#define bfd_get_section_size_after_reloc(section) \
((section->reloc_done) ? (section)->_cooked_size: (abort(),1))
asection *
bfd_get_section_by_name PARAMS ((bfd *abfd, CONST char *name));
asection *
bfd_make_section_old_way PARAMS ((bfd *abfd, CONST char *name));
asection *
bfd_make_section_anyway PARAMS ((bfd *abfd, CONST char *name));
asection *
bfd_make_section PARAMS ((bfd *, CONST char *name));
boolean
bfd_set_section_flags PARAMS ((bfd *abfd, asection *sec, flagword flags));
void
bfd_map_over_sections PARAMS ((bfd *abfd,
void (*func)(bfd *abfd,
asection *sect,
PTR obj),
PTR obj));
boolean
bfd_set_section_size PARAMS ((bfd *abfd, asection *sec, bfd_size_type val));
boolean
bfd_set_section_contents
PARAMS ((bfd *abfd,
asection *section,
PTR data,
file_ptr offset,
bfd_size_type count));
boolean
bfd_get_section_contents
PARAMS ((bfd *abfd, asection *section, PTR location,
file_ptr offset, bfd_size_type count));
enum bfd_architecture
{
bfd_arch_unknown, /* File arch not known */
bfd_arch_obscure, /* Arch known, not one of these */
bfd_arch_m68k, /* Motorola 68xxx */
bfd_arch_vax, /* DEC Vax */
bfd_arch_i960, /* Intel 960 */
/* The order of the following is important.
lower number indicates a machine type that
only accepts a subset of the instructions
available to machines with higher numbers.
The exception is the "ca", which is
incompatible with all other machines except
"core". */
#define bfd_mach_i960_core 1
#define bfd_mach_i960_ka_sa 2
#define bfd_mach_i960_kb_sb 3
#define bfd_mach_i960_mc 4
#define bfd_mach_i960_xa 5
#define bfd_mach_i960_ca 6
bfd_arch_a29k, /* AMD 29000 */
bfd_arch_sparc, /* SPARC */
bfd_arch_mips, /* MIPS Rxxxx */
bfd_arch_i386, /* Intel 386 */
bfd_arch_we32k, /* AT&T WE32xxx */
bfd_arch_tahoe, /* CCI/Harris Tahoe */
bfd_arch_i860, /* Intel 860 */
bfd_arch_romp, /* IBM ROMP PC/RT */
bfd_arch_alliant, /* Alliant */
bfd_arch_convex, /* Convex */
bfd_arch_m88k, /* Motorola 88xxx */
bfd_arch_pyramid, /* Pyramid Technology */
bfd_arch_h8300, /* Hitachi H8/300 */
#define bfd_mach_h8300 1
#define bfd_mach_h8300h 2
bfd_arch_rs6000, /* IBM RS/6000 */
bfd_arch_hppa, /* HP PA RISC */
bfd_arch_z8k, /* Zilog Z8000 */
#define bfd_mach_z8001 1
#define bfd_mach_z8002 2
bfd_arch_h8500, /* Hitachi H8/500 */
bfd_arch_sh, /* Hitachi SH */
bfd_arch_alpha, /* Dec Alpha */
bfd_arch_last
};
typedef struct bfd_arch_info
{
int bits_per_word;
int bits_per_address;
int bits_per_byte;
enum bfd_architecture arch;
long mach;
char *arch_name;
CONST char *printable_name;
unsigned int section_align_power;
/* true if this is the default machine for the architecture */
boolean the_default;
CONST struct bfd_arch_info * (*compatible)
PARAMS ((CONST struct bfd_arch_info *a,
CONST struct bfd_arch_info *b));
boolean (*scan) PARAMS ((CONST struct bfd_arch_info *, CONST char *));
/* How to disassemble an instruction, producing a printable
representation on a specified stdio stream. This isn't
defined for most processors at present, because of the size
of the additional tables it would drag in, and because gdb
wants to use a different interface. */
unsigned int (*disassemble) PARAMS ((bfd_vma addr, CONST char *data,
PTR stream));
struct bfd_arch_info *next;
} bfd_arch_info_type;
CONST char *
bfd_printable_name PARAMS ((bfd *abfd));
bfd_arch_info_type *
bfd_scan_arch PARAMS ((CONST char *string));
CONST bfd_arch_info_type *
bfd_arch_get_compatible PARAMS ((
CONST bfd *abfd,
CONST bfd *bbfd));
void
bfd_set_arch_info PARAMS ((bfd *abfd, bfd_arch_info_type *arg));
enum bfd_architecture
bfd_get_arch PARAMS ((bfd *abfd));
unsigned long
bfd_get_mach PARAMS ((bfd *abfd));
unsigned int
bfd_arch_bits_per_byte PARAMS ((bfd *abfd));
unsigned int
bfd_arch_bits_per_address PARAMS ((bfd *abfd));
bfd_arch_info_type *
bfd_get_arch_info PARAMS ((bfd *abfd));
bfd_arch_info_type *
bfd_lookup_arch
PARAMS ((enum bfd_architecture
arch,
long machine));
CONST char *
bfd_printable_arch_mach
PARAMS ((enum bfd_architecture arch, unsigned long machine));
typedef enum bfd_reloc_status
{
/* No errors detected */
bfd_reloc_ok,
/* The relocation was performed, but there was an overflow. */
bfd_reloc_overflow,
/* The address to relocate was not within the section supplied. */
bfd_reloc_outofrange,
/* Used by special functions */
bfd_reloc_continue,
/* Unsupported relocation size requested. */
bfd_reloc_notsupported,
/* Unused */
bfd_reloc_other,
/* The symbol to relocate against was undefined. */
bfd_reloc_undefined,
/* The relocation was performed, but may not be ok - presently
generated only when linking i960 coff files with i960 b.out
symbols. If this type is returned, the error_message argument
to bfd_perform_relocation will be set. */
bfd_reloc_dangerous
}
bfd_reloc_status_type;
typedef struct reloc_cache_entry
{
/* A pointer into the canonical table of pointers */
struct symbol_cache_entry **sym_ptr_ptr;
/* offset in section */
bfd_size_type address;
/* addend for relocation value */
bfd_vma addend;
/* Pointer to how to perform the required relocation */
const struct reloc_howto_struct *howto;
} arelent;
enum complain_overflow
{
/* Do not complain on overflow. */
complain_overflow_dont,
/* Complain if the bitfield overflows, whether it is considered
as signed or unsigned. */
complain_overflow_bitfield,
/* Complain if the value overflows when considered as signed
number. */
complain_overflow_signed,
/* Complain if the value overflows when considered as an
unsigned number. */
complain_overflow_unsigned
};
typedef struct reloc_howto_struct
{
/* The type field has mainly a documetary use - the back end can
do what it wants with it, though normally the back end's
external idea of what a reloc number is stored
in this field. For example, a PC relative word relocation
in a coff environment has the type 023 - because that's
what the outside world calls a R_PCRWORD reloc. */
unsigned int type;
/* The value the final relocation is shifted right by. This drops
unwanted data from the relocation. */
unsigned int rightshift;
/* The size of the item to be relocated. This is *not* a
power-of-two measure. To get the number of bytes operated
on by a type of relocation, use bfd_get_reloc_size. */
int size;
/* The number of bits in the item to be relocated. This is used
when doing overflow checking. */
unsigned int bitsize;
/* Notes that the relocation is relative to the location in the
data section of the addend. The relocation function will
subtract from the relocation value the address of the location
being relocated. */
boolean pc_relative;
/* The bit position of the reloc value in the destination.
The relocated value is left shifted by this amount. */
unsigned int bitpos;
/* What type of overflow error should be checked for when
relocating. */
enum complain_overflow complain_on_overflow;
/* If this field is non null, then the supplied function is
called rather than the normal function. This allows really
strange relocation methods to be accomodated (e.g., i960 callj
instructions). */
bfd_reloc_status_type (*special_function)
PARAMS ((bfd *abfd,
arelent *reloc_entry,
struct symbol_cache_entry *symbol,
PTR data,
asection *input_section,
bfd *output_bfd,
char **error_message));
/* The textual name of the relocation type. */
char *name;
/* When performing a partial link, some formats must modify the
relocations rather than the data - this flag signals this.*/
boolean partial_inplace;
/* The src_mask selects which parts of the read in data
are to be used in the relocation sum. E.g., if this was an 8 bit
bit of data which we read and relocated, this would be
0x000000ff. When we have relocs which have an addend, such as
sun4 extended relocs, the value in the offset part of a
relocating field is garbage so we never use it. In this case
the mask would be 0x00000000. */
bfd_vma src_mask;
/* The dst_mask selects which parts of the instruction are replaced
into the instruction. In most cases src_mask == dst_mask,
except in the above special case, where dst_mask would be
0x000000ff, and src_mask would be 0x00000000. */
bfd_vma dst_mask;
/* When some formats create PC relative instructions, they leave
the value of the pc of the place being relocated in the offset
slot of the instruction, so that a PC relative relocation can
be made just by adding in an ordinary offset (e.g., sun3 a.out).
Some formats leave the displacement part of an instruction
empty (e.g., m88k bcs); this flag signals the fact.*/
boolean pcrel_offset;
} reloc_howto_type;
#define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
{(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
#define HOWTO_PREPARE(relocation, symbol) \
{ \
if (symbol != (asymbol *)NULL) { \
if (bfd_is_com_section (symbol->section)) { \
relocation = 0; \
} \
else { \
relocation = symbol->value; \
} \
} \
}
int
bfd_get_reloc_size PARAMS ((const reloc_howto_type *));
typedef unsigned char bfd_byte;
typedef struct relent_chain {
arelent relent;
struct relent_chain *next;
} arelent_chain;
bfd_reloc_status_type
bfd_perform_relocation
PARAMS ((bfd *abfd,
arelent *reloc_entry,
PTR data,
asection *input_section,
bfd *output_bfd,
char **error_message));
typedef enum bfd_reloc_code_real
{
/* Basic absolute relocations */
BFD_RELOC_64,
BFD_RELOC_32,
BFD_RELOC_16,
BFD_RELOC_8,
/* PC-relative relocations */
BFD_RELOC_64_PCREL,
BFD_RELOC_32_PCREL,
BFD_RELOC_24_PCREL, /* used by i960 */
BFD_RELOC_16_PCREL,
BFD_RELOC_8_PCREL,
/* Linkage-table relative */
BFD_RELOC_32_BASEREL,
BFD_RELOC_16_BASEREL,
BFD_RELOC_8_BASEREL,
/* The type of reloc used to build a contructor table - at the moment
probably a 32 bit wide abs address, but the cpu can choose. */
BFD_RELOC_CTOR,
/* 8 bits wide, but used to form an address like 0xffnn */
BFD_RELOC_8_FFnn,
/* 32-bit pc-relative, shifted right 2 bits (i.e., 30-bit
word displacement, e.g. for SPARC) */
BFD_RELOC_32_PCREL_S2,
/* High 22 bits of 32-bit value, placed into lower 22 bits of
target word; simple reloc. */
BFD_RELOC_HI22,
/* Low 10 bits. */
BFD_RELOC_LO10,
/* Reloc types used for i960/b.out. */
BFD_RELOC_I960_CALLJ,
/* now for the sparc/elf codes */
BFD_RELOC_NONE, /* actually used */
BFD_RELOC_SPARC_WDISP22,
BFD_RELOC_SPARC22,
BFD_RELOC_SPARC13,
BFD_RELOC_SPARC_GOT10,
BFD_RELOC_SPARC_GOT13,
BFD_RELOC_SPARC_GOT22,
BFD_RELOC_SPARC_PC10,
BFD_RELOC_SPARC_PC22,
BFD_RELOC_SPARC_WPLT30,
BFD_RELOC_SPARC_COPY,
BFD_RELOC_SPARC_GLOB_DAT,
BFD_RELOC_SPARC_JMP_SLOT,
BFD_RELOC_SPARC_RELATIVE,
BFD_RELOC_SPARC_UA32,
/* these are a.out specific? */
BFD_RELOC_SPARC_BASE13,
BFD_RELOC_SPARC_BASE22,
/* Bits 27..2 of the relocation address shifted right 2 bits;
simple reloc otherwise. */
BFD_RELOC_MIPS_JMP,
/* signed 16-bit pc-relative, shifted right 2 bits (e.g. for MIPS) */
BFD_RELOC_16_PCREL_S2,
/* High 16 bits of 32-bit value; simple reloc. */
BFD_RELOC_HI16,
/* High 16 bits of 32-bit value but the low 16 bits will be sign
extended and added to form the final result. If the low 16
bits form a negative number, we need to add one to the high value
to compensate for the borrow when the low bits are added. */
BFD_RELOC_HI16_S,
/* Low 16 bits. */
BFD_RELOC_LO16,
/* 16 bit relocation relative to the global pointer. */
BFD_RELOC_MIPS_GPREL,
/* Relocation against a MIPS literal section. */
BFD_RELOC_MIPS_LITERAL,
/* MIPS ELF relocations. */
BFD_RELOC_MIPS_GOT16,
BFD_RELOC_MIPS_CALL16,
BFD_RELOC_MIPS_GPREL32,
/* These are, so far, specific to HPPA processors. I'm not sure that some
don't duplicate other reloc types, such as BFD_RELOC_32 and _32_PCREL.
Also, many more were in the list I got that don't fit in well in the
model BFD uses, so I've omitted them for now. If we do make this reloc
type get used for code that really does implement the funky reloc types,
they'll have to be added to this list. */
BFD_RELOC_HPPA_32,
BFD_RELOC_HPPA_11,
BFD_RELOC_HPPA_14,
BFD_RELOC_HPPA_17,
BFD_RELOC_HPPA_L21,
BFD_RELOC_HPPA_R11,
BFD_RELOC_HPPA_R14,
BFD_RELOC_HPPA_R17,
BFD_RELOC_HPPA_LS21,
BFD_RELOC_HPPA_RS11,
BFD_RELOC_HPPA_RS14,
BFD_RELOC_HPPA_RS17,
BFD_RELOC_HPPA_LD21,
BFD_RELOC_HPPA_RD11,
BFD_RELOC_HPPA_RD14,
BFD_RELOC_HPPA_RD17,
BFD_RELOC_HPPA_LR21,
BFD_RELOC_HPPA_RR14,
BFD_RELOC_HPPA_RR17,
BFD_RELOC_HPPA_GOTOFF_11,
BFD_RELOC_HPPA_GOTOFF_14,
BFD_RELOC_HPPA_GOTOFF_L21,
BFD_RELOC_HPPA_GOTOFF_R11,
BFD_RELOC_HPPA_GOTOFF_R14,
BFD_RELOC_HPPA_GOTOFF_LS21,
BFD_RELOC_HPPA_GOTOFF_RS11,
BFD_RELOC_HPPA_GOTOFF_RS14,
BFD_RELOC_HPPA_GOTOFF_LD21,
BFD_RELOC_HPPA_GOTOFF_RD11,
BFD_RELOC_HPPA_GOTOFF_RD14,
BFD_RELOC_HPPA_GOTOFF_LR21,
BFD_RELOC_HPPA_GOTOFF_RR14,
BFD_RELOC_HPPA_DLT_32,
BFD_RELOC_HPPA_DLT_11,
BFD_RELOC_HPPA_DLT_14,
BFD_RELOC_HPPA_DLT_L21,
BFD_RELOC_HPPA_DLT_R11,
BFD_RELOC_HPPA_DLT_R14,
BFD_RELOC_HPPA_ABS_CALL_11,
BFD_RELOC_HPPA_ABS_CALL_14,
BFD_RELOC_HPPA_ABS_CALL_17,
BFD_RELOC_HPPA_ABS_CALL_L21,
BFD_RELOC_HPPA_ABS_CALL_R11,
BFD_RELOC_HPPA_ABS_CALL_R14,
BFD_RELOC_HPPA_ABS_CALL_R17,
BFD_RELOC_HPPA_ABS_CALL_LS21,
BFD_RELOC_HPPA_ABS_CALL_RS11,
BFD_RELOC_HPPA_ABS_CALL_RS14,
BFD_RELOC_HPPA_ABS_CALL_RS17,
BFD_RELOC_HPPA_ABS_CALL_LD21,
BFD_RELOC_HPPA_ABS_CALL_RD11,
BFD_RELOC_HPPA_ABS_CALL_RD14,
BFD_RELOC_HPPA_ABS_CALL_RD17,
BFD_RELOC_HPPA_ABS_CALL_LR21,
BFD_RELOC_HPPA_ABS_CALL_RR14,
BFD_RELOC_HPPA_ABS_CALL_RR17,
BFD_RELOC_HPPA_PCREL_CALL_11,
BFD_RELOC_HPPA_PCREL_CALL_12,
BFD_RELOC_HPPA_PCREL_CALL_14,
BFD_RELOC_HPPA_PCREL_CALL_17,
BFD_RELOC_HPPA_PCREL_CALL_L21,
BFD_RELOC_HPPA_PCREL_CALL_R11,
BFD_RELOC_HPPA_PCREL_CALL_R14,
BFD_RELOC_HPPA_PCREL_CALL_R17,
BFD_RELOC_HPPA_PCREL_CALL_LS21,
BFD_RELOC_HPPA_PCREL_CALL_RS11,
BFD_RELOC_HPPA_PCREL_CALL_RS14,
BFD_RELOC_HPPA_PCREL_CALL_RS17,
BFD_RELOC_HPPA_PCREL_CALL_LD21,
BFD_RELOC_HPPA_PCREL_CALL_RD11,
BFD_RELOC_HPPA_PCREL_CALL_RD14,
BFD_RELOC_HPPA_PCREL_CALL_RD17,
BFD_RELOC_HPPA_PCREL_CALL_LR21,
BFD_RELOC_HPPA_PCREL_CALL_RR14,
BFD_RELOC_HPPA_PCREL_CALL_RR17,
BFD_RELOC_HPPA_PLABEL_32,
BFD_RELOC_HPPA_PLABEL_11,
BFD_RELOC_HPPA_PLABEL_14,
BFD_RELOC_HPPA_PLABEL_L21,
BFD_RELOC_HPPA_PLABEL_R11,
BFD_RELOC_HPPA_PLABEL_R14,
BFD_RELOC_HPPA_UNWIND_ENTRY,
BFD_RELOC_HPPA_UNWIND_ENTRIES,
/* i386/elf relocations */
BFD_RELOC_386_GOT32,
BFD_RELOC_386_PLT32,
BFD_RELOC_386_COPY,
BFD_RELOC_386_GLOB_DAT,
BFD_RELOC_386_JUMP_SLOT,
BFD_RELOC_386_RELATIVE,
BFD_RELOC_386_GOTOFF,
BFD_RELOC_386_GOTPC,
/* this must be the highest numeric value */
BFD_RELOC_UNUSED
} bfd_reloc_code_real_type;
const struct reloc_howto_struct *
bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
typedef struct symbol_cache_entry
{
/* A pointer to the BFD which owns the symbol. This information
is necessary so that a back end can work out what additional
information (invisible to the application writer) is carried
with the symbol.
This field is *almost* redundant, since you can use section->owner
instead, except that some symbols point to the global sections
bfd_{abs,com,und}_section. This could be fixed by making
these globals be per-bfd (or per-target-flavor). FIXME. */
struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
/* The text of the symbol. The name is left alone, and not copied; the
application may not alter it. */
CONST char *name;
/* The value of the symbol. This really should be a union of a
numeric value with a pointer, since some flags indicate that
a pointer to another symbol is stored here. */
symvalue value;
/* Attributes of a symbol: */
#define BSF_NO_FLAGS 0x00
/* The symbol has local scope; <<static>> in <<C>>. The value
is the offset into the section of the data. */
#define BSF_LOCAL 0x01
/* The symbol has global scope; initialized data in <<C>>. The
value is the offset into the section of the data. */
#define BSF_GLOBAL 0x02
/* The symbol has global scope and is exported. The value is
the offset into the section of the data. */
#define BSF_EXPORT BSF_GLOBAL /* no real difference */
/* A normal C symbol would be one of:
<<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
<<BSF_GLOBAL>> */
/* The symbol is a debugging record. The value has an arbitary
meaning. */
#define BSF_DEBUGGING 0x08
/* The symbol denotes a function entry point. Used in ELF,
perhaps others someday. */
#define BSF_FUNCTION 0x10
/* Used by the linker. */
#define BSF_KEEP 0x20
#define BSF_KEEP_G 0x40
/* A weak global symbol, overridable without warnings by
a regular global symbol of the same name. */
#define BSF_WEAK 0x80
/* This symbol was created to point to a section, e.g. ELF's
STT_SECTION symbols. */
#define BSF_SECTION_SYM 0x100
/* The symbol used to be a common symbol, but now it is
allocated. */
#define BSF_OLD_COMMON 0x200
/* The default value for common data. */
#define BFD_FORT_COMM_DEFAULT_VALUE 0
/* In some files the type of a symbol sometimes alters its
location in an output file - ie in coff a <<ISFCN>> symbol
which is also <<C_EXT>> symbol appears where it was
declared and not at the end of a section. This bit is set
by the target BFD part to convey this information. */
#define BSF_NOT_AT_END 0x400
/* Signal that the symbol is the label of constructor section. */
#define BSF_CONSTRUCTOR 0x800
/* Signal that the symbol is a warning symbol. If the symbol
is a warning symbol, then the value field (I know this is
tacky) will point to the asymbol which when referenced will
cause the warning. */
#define BSF_WARNING 0x1000
/* Signal that the symbol is indirect. The value of the symbol
is a pointer to an undefined asymbol which contains the
name to use instead. */
#define BSF_INDIRECT 0x2000
/* BSF_FILE marks symbols that contain a file name. This is used
for ELF STT_FILE symbols. */
#define BSF_FILE 0x4000
flagword flags;
/* A pointer to the section to which this symbol is
relative. This will always be non NULL, there are special
sections for undefined and absolute symbols */
struct sec *section;
/* Back end special data. This is being phased out in favour
of making this a union. */
PTR udata;
} asymbol;
#define get_symtab_upper_bound(abfd) \
BFD_SEND (abfd, _get_symtab_upper_bound, (abfd))
#define bfd_canonicalize_symtab(abfd, location) \
BFD_SEND (abfd, _bfd_canonicalize_symtab,\
(abfd, location))
boolean
bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count));
void
bfd_print_symbol_vandf PARAMS ((PTR file, asymbol *symbol));
#define bfd_make_empty_symbol(abfd) \
BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
#define bfd_make_debug_symbol(abfd,ptr,size) \
BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
int
bfd_decode_symclass PARAMS ((asymbol *symbol));
void
bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret));
struct _bfd
{
/* The filename the application opened the BFD with. */
CONST char *filename;
/* A pointer to the target jump table. */
struct bfd_target *xvec;
/* To avoid dragging too many header files into every file that
includes `<<bfd.h>>', IOSTREAM has been declared as a "char
*", and MTIME as a "long". Their correct types, to which they
are cast when used, are "FILE *" and "time_t". The iostream
is the result of an fopen on the filename. */
char *iostream;
/* Is the file descriptor being cached? That is, can it be closed as
needed, and re-opened when accessed later? */
boolean cacheable;
/* Marks whether there was a default target specified when the
BFD was opened. This is used to select which matching algorithm
to use to choose the back end. */
boolean target_defaulted;
/* The caching routines use these to maintain a
least-recently-used list of BFDs */
struct _bfd *lru_prev, *lru_next;
/* When a file is closed by the caching routines, BFD retains
state information on the file here: */
file_ptr where;
/* and here: (``once'' means at least once) */
boolean opened_once;
/* Set if we have a locally maintained mtime value, rather than
getting it from the file each time: */
boolean mtime_set;
/* File modified time, if mtime_set is true: */
long mtime;
/* Reserved for an unimplemented file locking extension.*/
int ifd;
/* The format which belongs to the BFD. (object, core, etc.) */
bfd_format format;
/* The direction the BFD was opened with*/
enum bfd_direction {no_direction = 0,
read_direction = 1,
write_direction = 2,
both_direction = 3} direction;
/* Format_specific flags*/
flagword flags;
/* Currently my_archive is tested before adding origin to
anything. I believe that this can become always an add of
origin, with origin set to 0 for non archive files. */
file_ptr origin;
/* Remember when output has begun, to stop strange things
from happening. */
boolean output_has_begun;
/* Pointer to linked list of sections*/
struct sec *sections;
/* The number of sections */
unsigned int section_count;
/* Stuff only useful for object files:
The start address. */
bfd_vma start_address;
/* Used for input and output*/
unsigned int symcount;
/* Symbol table for output BFD (with symcount entries) */
struct symbol_cache_entry **outsymbols;
/* Pointer to structure which contains architecture information*/
struct bfd_arch_info *arch_info;
/* Stuff only useful for archives:*/
PTR arelt_data;
struct _bfd *my_archive; /* The containing archive BFD. */
struct _bfd *next; /* The next BFD in the archive. */
struct _bfd *archive_head; /* The first BFD in the archive. */
boolean has_armap;
/* A chain of BFD structures involved in a link. */
struct _bfd *link_next;
/* A field used by _bfd_generic_link_add_archive_symbols. This will
be used only for archive elements. */
int archive_pass;
/* Used by the back end to hold private data. */
union
{
struct aout_data_struct *aout_data;
struct artdata *aout_ar_data;
struct _oasys_data *oasys_obj_data;
struct _oasys_ar_data *oasys_ar_data;
struct coff_tdata *coff_obj_data;
struct ecoff_tdata *ecoff_obj_data;
struct ieee_data_struct *ieee_data;
struct ieee_ar_data_struct *ieee_ar_data;
struct srec_data_struct *srec_data;
struct tekhex_data_struct *tekhex_data;
struct elf_obj_tdata *elf_obj_data;
struct nlm_obj_tdata *nlm_obj_data;
struct bout_data_struct *bout_data;
struct sun_core_struct *sun_core_data;
struct trad_core_struct *trad_core_data;
struct som_data_struct *som_data;
struct hpux_core_struct *hpux_core_data;
struct hppabsd_core_struct *hppabsd_core_data;
struct sgi_core_struct *sgi_core_data;
struct lynx_core_struct *lynx_core_data;
struct osf_core_struct *osf_core_data;
PTR any;
} tdata;
/* Used by the application to hold private data*/
PTR usrdata;
/* Where all the allocated stuff under this BFD goes */
struct obstack memory;
};
unsigned int
bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
unsigned int
bfd_canonicalize_reloc
PARAMS ((bfd *abfd,
asection *sec,
arelent **loc,
asymbol **syms));
void
bfd_set_reloc
PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count)
);
boolean
bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags));
boolean
bfd_set_start_address PARAMS ((bfd *abfd, bfd_vma vma));
long
bfd_get_mtime PARAMS ((bfd *abfd));
long
bfd_get_size PARAMS ((bfd *abfd));
int
bfd_get_gp_size PARAMS ((bfd *abfd));
void
bfd_set_gp_size PARAMS ((bfd *abfd, int i));
bfd_vma
bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base));
#define bfd_sizeof_headers(abfd, reloc) \
BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line))
/* Do these three do anything useful at all, for any back end? */
#define bfd_debug_info_start(abfd) \
BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
#define bfd_debug_info_end(abfd) \
BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
#define bfd_debug_info_accumulate(abfd, section) \
BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
#define bfd_stat_arch_elt(abfd, stat) \
BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
#define bfd_set_arch_mach(abfd, arch, mach)\
BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
#define bfd_get_relocated_section_contents(abfd, link_info, link_order, data, relocateable, symbols) \
BFD_SEND (abfd, _bfd_get_relocated_section_contents, \
(abfd, link_info, link_order, data, relocateable, symbols))
#define bfd_relax_section(abfd, section, link_info, symbols) \
BFD_SEND (abfd, _bfd_relax_section, \
(abfd, section, link_info, symbols))
#define bfd_link_hash_table_create(abfd) \
BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
#define bfd_link_add_symbols(abfd, info) \
BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
#define bfd_final_link(abfd, info) \
BFD_SEND (abfd, _bfd_final_link, (abfd, info))
symindex
bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym));
boolean
bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head));
bfd *
bfd_get_elt_at_index PARAMS ((bfd *archive, int index));
bfd *
bfd_openr_next_archived_file PARAMS ((bfd *archive, bfd *previous));
CONST char *
bfd_core_file_failing_command PARAMS ((bfd *abfd));
int
bfd_core_file_failing_signal PARAMS ((bfd *abfd));
boolean
core_file_matches_executable_p
PARAMS ((bfd *core_bfd, bfd *exec_bfd));
#define BFD_SEND(bfd, message, arglist) \
((*((bfd)->xvec->message)) arglist)
#define BFD_SEND_FMT(bfd, message, arglist) \
(((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
enum bfd_flavour {
bfd_target_unknown_flavour,
bfd_target_aout_flavour,
bfd_target_coff_flavour,
bfd_target_ecoff_flavour,
bfd_target_elf_flavour,
bfd_target_ieee_flavour,
bfd_target_nlm_flavour,
bfd_target_oasys_flavour,
bfd_target_tekhex_flavour,
bfd_target_srec_flavour,
bfd_target_som_flavour};
/* Forward declaration. */
typedef struct bfd_link_info _bfd_link_info;
typedef struct bfd_target
{
char *name;
enum bfd_flavour flavour;
boolean byteorder_big_p;
boolean header_byteorder_big_p;
flagword object_flags;
flagword section_flags;
char symbol_leading_char;
char ar_pad_char;
unsigned short ar_max_namelen;
unsigned int align_power_min;
bfd_vma (*bfd_getx64) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *));
void (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *));
bfd_vma (*bfd_getx32) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((const bfd_byte *));
void (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *));
bfd_vma (*bfd_getx16) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((const bfd_byte *));
void (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *));
bfd_vma (*bfd_h_getx64) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((const bfd_byte *));
void (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *));
bfd_vma (*bfd_h_getx32) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((const bfd_byte *));
void (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *));
bfd_vma (*bfd_h_getx16) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *));
void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
struct bfd_target * (*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
char * (*_core_file_failing_command) PARAMS ((bfd *));
int (*_core_file_failing_signal) PARAMS ((bfd *));
boolean (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *));
boolean (*_bfd_slurp_armap) PARAMS ((bfd *));
boolean (*_bfd_slurp_extended_name_table) PARAMS ((bfd *));
void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
boolean (*write_armap) PARAMS ((bfd *arch,
unsigned int elength,
struct orl *map,
unsigned int orl_count,
int stridx));
boolean (*_close_and_cleanup) PARAMS ((bfd *));
boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
file_ptr, bfd_size_type));
boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
file_ptr, bfd_size_type));
boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
unsigned int (*_get_symtab_upper_bound) PARAMS ((bfd *));
unsigned int (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
struct symbol_cache_entry **));
unsigned int (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
unsigned int (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
struct symbol_cache_entry **));
struct symbol_cache_entry *
(*_bfd_make_empty_symbol) PARAMS ((bfd *));
void (*_bfd_print_symbol) PARAMS ((bfd *, PTR,
struct symbol_cache_entry *,
bfd_print_symbol_type));
#define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
void (*_bfd_get_symbol_info) PARAMS ((bfd *,
struct symbol_cache_entry *,
symbol_info *));
#define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
unsigned long));
bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
boolean (*_bfd_find_nearest_line) PARAMS ((bfd *abfd,
struct sec *section, struct symbol_cache_entry **symbols,
bfd_vma offset, CONST char **file, CONST char **func,
unsigned int *line));
int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
void (*_bfd_debug_info_start) PARAMS ((bfd *));
void (*_bfd_debug_info_end) PARAMS ((bfd *));
void (*_bfd_debug_info_accumulate) PARAMS ((bfd *, struct sec *));
bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
struct bfd_link_info *, struct bfd_link_order *,
bfd_byte *data, boolean relocateable,
struct symbol_cache_entry **));
boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
struct bfd_link_info *, struct symbol_cache_entry **));
/* See documentation on reloc types. */
CONST struct reloc_howto_struct *
(*reloc_type_lookup) PARAMS ((bfd *abfd,
bfd_reloc_code_real_type code));
/* Back-door to allow format-aware applications to create debug symbols
while using BFD for everything else. Currently used by the assembler
when creating COFF files. */
asymbol * (*_bfd_make_debug_symbol) PARAMS ((
bfd *abfd,
void *ptr,
unsigned long size));
/* Create a hash table for the linker. Different backends store
different information in this table. */
struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *));
/* Add symbols from this object file into the hash table. */
boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
/* Do a link based on the link_order structures attached to each
section of the BFD. */
boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
PTR backend_data;
} bfd_target;
bfd_target *
bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd));
CONST char **
bfd_target_list PARAMS ((void));
boolean
bfd_check_format PARAMS ((bfd *abfd, bfd_format format));
boolean
bfd_set_format PARAMS ((bfd *abfd, bfd_format format));
CONST char *
bfd_format_string PARAMS ((bfd_format format));
#endif