home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Frozen Fish 1: Amiga
/
FrozenFish-Apr94.iso
/
bbs
/
cbm
/
os-include.lha
/
os-include
/
devices
/
serial.h
< prev
next >
Wrap
C/C++ Source or Header
|
1993-10-15
|
7KB
|
181 lines
#ifndef DEVICES_SERIAL_H
#define DEVICES_SERIAL_H
/*
** $VER: serial.h 33.6 (6.11.90)
** Includes Release 40.15
**
** external declarations for the serial device
**
** (C) Copyright 1985-1993 Commodore-Amiga, Inc.
** All Rights Reserved
*/
#ifndef EXEC_IO_H
#include "exec/io.h"
#endif /* EXEC_IO_H */
/* array of termination char's */
/* to use,see serial.doc setparams */
struct IOTArray {
ULONG TermArray0;
ULONG TermArray1;
};
#define SER_DEFAULT_CTLCHAR 0x11130000 /* default chars for xON,xOFF */
/* You may change these via SETPARAMS. At this time, parity is not
calculated for xON/xOFF characters. You must supply them with the
desired parity. */
/******************************************************************/
/* CAUTION !! IF YOU ACCESS the serial.device, you MUST (!!!!) use an
IOExtSer-sized structure or you may overlay innocent memory !! */
/******************************************************************/
struct IOExtSer {
struct IOStdReq IOSer;
/* STRUCT MsgNode
* 0 APTR Succ
* 4 APTR Pred
* 8 UBYTE Type
* 9 UBYTE Pri
* A APTR Name
* E APTR ReplyPort
* 12 UWORD MNLength
* STRUCT IOExt
* 14 APTR io_Device
* 18 APTR io_Unit
* 1C UWORD io_Command
* 1E UBYTE io_Flags
* 1F UBYTE io_Error
* STRUCT IOStdExt
* 20 ULONG io_Actual
* 24 ULONG io_Length
* 28 APTR io_Data
* 2C ULONG io_Offset
*
* 30 */
ULONG io_CtlChar; /* control char's (order = xON,xOFF,INQ,ACK) */
ULONG io_RBufLen; /* length in bytes of serial port's read buffer */
ULONG io_ExtFlags; /* additional serial flags (see bitdefs below) */
ULONG io_Baud; /* baud rate requested (true baud) */
ULONG io_BrkTime; /* duration of break signal in MICROseconds */
struct IOTArray io_TermArray; /* termination character array */
UBYTE io_ReadLen; /* bits per read character (# of bits) */
UBYTE io_WriteLen; /* bits per write character (# of bits) */
UBYTE io_StopBits; /* stopbits for read (# of bits) */
UBYTE io_SerFlags; /* see SerFlags bit definitions below */
UWORD io_Status;
};
/* status of serial port, as follows:
* BIT ACTIVE FUNCTION
* 0 --- reserved
* 1 --- reserved
* 2 high Connected to parallel "select" on the A1000.
* Connected to both the parallel "select" and
* serial "ring indicator" pins on the A500
* & A2000. Take care when making cables.
* 3 low Data Set Ready
* 4 low Clear To Send
* 5 low Carrier Detect
* 6 low Ready To Send
* 7 low Data Terminal Ready
* 8 high read overrun
* 9 high break sent
* 10 high break received
* 11 high transmit x-OFFed
* 12 high receive x-OFFed
* 13-15 reserved
*/
#define SDCMD_QUERY CMD_NONSTD /* $09 */
#define SDCMD_BREAK (CMD_NONSTD+1) /* $0A */
#define SDCMD_SETPARAMS (CMD_NONSTD+2) /* $0B */
#define SERB_XDISABLED 7 /* io_SerFlags xOn-xOff feature disabled bit */
#define SERF_XDISABLED (1<<7) /* " xOn-xOff feature disabled mask */
#define SERB_EOFMODE 6 /* " EOF mode enabled bit */
#define SERF_EOFMODE (1<<6) /* " EOF mode enabled mask */
#define SERB_SHARED 5 /* " non-exclusive access bit */
#define SERF_SHARED (1<<5) /* " non-exclusive access mask */
#define SERB_RAD_BOOGIE 4 /* " high-speed mode active bit */
#define SERF_RAD_BOOGIE (1<<4) /* " high-speed mode active mask */
#define SERB_QUEUEDBRK 3 /* " queue this Break ioRqst */
#define SERF_QUEUEDBRK (1<<3) /* " queue this Break ioRqst */
#define SERB_7WIRE 2 /* " RS232 7-wire protocol */
#define SERF_7WIRE (1<<2) /* " RS232 7-wire protocol */
#define SERB_PARTY_ODD 1 /* " parity feature enabled bit */
#define SERF_PARTY_ODD (1<<1) /* " parity feature enabled mask */
#define SERB_PARTY_ON 0 /* " parity-enabled bit */
#define SERF_PARTY_ON (1<<0) /* " parity-enabled mask */
/* These now refect the actual bit positions in the io_Status UWORD */
#define IO_STATB_XOFFREAD 12 /* io_Status receive currently xOFF'ed bit */
#define IO_STATF_XOFFREAD (1<<12) /* " receive currently xOFF'ed mask */
#define IO_STATB_XOFFWRITE 11 /* " transmit currently xOFF'ed bit */
#define IO_STATF_XOFFWRITE (1<<11) /* " transmit currently xOFF'ed mask */
#define IO_STATB_READBREAK 10 /* " break was latest input bit */
#define IO_STATF_READBREAK (1<<10) /* " break was latest input mask */
#define IO_STATB_WROTEBREAK 9 /* " break was latest output bit */
#define IO_STATF_WROTEBREAK (1<<9) /* " break was latest output mask */
#define IO_STATB_OVERRUN 8 /* " status word RBF overrun bit */
#define IO_STATF_OVERRUN (1<<8) /* " status word RBF overrun mask */
#define SEXTB_MSPON 1 /* io_ExtFlags. Use mark-space parity, */
/* instead of odd-even. */
#define SEXTF_MSPON (1<<1) /* " mark-space parity mask */
#define SEXTB_MARK 0 /* " if mark-space, use mark */
#define SEXTF_MARK (1<<0) /* " if mark-space, use mark mask */
#define SerErr_DevBusy 1
#define SerErr_BaudMismatch 2 /* baud rate not supported by hardware */
#define SerErr_BufErr 4 /* Failed to allocate new read buffer */
#define SerErr_InvParam 5
#define SerErr_LineErr 6
#define SerErr_ParityErr 9
#define SerErr_TimerErr 11 /*(See the serial/OpenDevice autodoc)*/
#define SerErr_BufOverflow 12
#define SerErr_NoDSR 13
#define SerErr_DetectedBreak 15
#ifdef DEVICES_SERIAL_H_OBSOLETE
#define SerErr_InvBaud 3 /* unused */
#define SerErr_NotOpen 7 /* unused */
#define SerErr_PortReset 8 /* unused */
#define SerErr_InitErr 10 /* unused */
#define SerErr_NoCTS 14 /* unused */
/* These defines refer to the HIGH ORDER byte of io_Status. They have
been replaced by the new, corrected ones above */
#define IOSTB_XOFFREAD 4 /* iost_hob receive currently xOFF'ed bit */
#define IOSTF_XOFFREAD (1<<4) /* " receive currently xOFF'ed mask */
#define IOSTB_XOFFWRITE 3 /* " transmit currently xOFF'ed bit */
#define IOSTF_XOFFWRITE (1<<3) /* " transmit currently xOFF'ed mask */
#define IOSTB_READBREAK 2 /* " break was latest input bit */
#define IOSTF_READBREAK (1<<2) /* " break was latest input mask */
#define IOSTB_WROTEBREAK 1 /* " break was latest output bit */
#define IOSTF_WROTEBREAK (1<<1) /* " break was latest output mask */
#define IOSTB_OVERRUN 0 /* " status word RBF overrun bit */
#define IOSTF_OVERRUN (1<<0) /* " status word RBF overrun mask */
#define IOSERB_BUFRREAD 7 /* io_Flags from read buffer bit */
#define IOSERF_BUFRREAD (1<<7) /* " from read buffer mask */
#define IOSERB_QUEUED 6 /* " rqst-queued bit */
#define IOSERF_QUEUED (1<<6) /* " rqst-queued mask */
#define IOSERB_ABORT 5 /* " rqst-aborted bit */
#define IOSERF_ABORT (1<<5) /* " rqst-aborted mask */
#define IOSERB_ACTIVE 4 /* " rqst-qued-or-current bit */
#define IOSERF_ACTIVE (1<<4) /* " rqst-qued-or-current mask */
#endif
#define SERIALNAME "serial.device"
#endif /* DEVICES_SERIAL_H */