home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Frozen Fish 1: Amiga
/
FrozenFish-Apr94.iso
/
bbs
/
alib
/
d5xx
/
d591
/
monopolysrc.lha
/
MonopolySrc
/
iff_h.LZH
/
iff_h
/
iff.h
< prev
next >
Wrap
C/C++ Source or Header
|
1992-01-06
|
21KB
|
479 lines
#ifndef IFF_H
#define IFF_H
/*----------------------------------------------------------------------*/
/* IFF.H defs for IFF-85 Interchange Format Files. 1/22/86 */
/* */
/* By Jerry Morrison and Steve Shaw, Electronic Arts. */
/* This software is in the public domain. */
/*----------------------------------------------------------------------*/
#ifndef COMPILER_H
#include "mono:iff_h/compiler.h"
#endif
#ifndef LIBRARIES_DOS_H
#include <libraries/dos.h>
#endif
#ifndef OFFSET_BEGINNING
#define OFFSET_BEGINNING OFFSET_BEGINING
#endif
typedef LONG IFFP; /* Status code result from an IFF procedure */
/* LONG, because must be type compatable with ID for GetChunkHdr.*/
/* Note that the error codes below are not legal IDs.*/
#define IFF_OKAY 0L /* Keep going...*/
#define END_MARK -1L /* As if there was a chunk at end of group.*/
#define IFF_DONE -2L /* clientProc returns this when it has READ enough.
* It means return thru all levels. File is Okay.*/
#define DOS_ERROR -3L
#define NOT_IFF -4L /* not an IFF file.*/
#define NO_FILE -5L /* Tried to open file, DOS didn't find it.*/
#define CLIENT_ERROR -6L /* Client made invalid request, for instance, write
* a negative size chunk.*/
#define BAD_FORM -7L /* A client read proc complains about FORM semantics;
* e.g. valid IFF, but missing a required chunk.*/
#define SHORT_CHUNK -8L /* Client asked to IFFReadBytes more bytes than left
* in the chunk. Could be client bug or bad form.*/
#define BAD_IFF -9L /* mal-formed IFF file. [TBD] Expand this into a
* range of error codes.*/
#define LAST_ERROR BAD_IFF
/* This MACRO is used to RETURN immediately when a termination condition is
* found. This is a pretty weird macro. It requires the caller to declare a
* local "IFFP iffp" and assign it. This wouldn't work as a subroutine since
* it returns for it's caller. */
#define CheckIFFP() { if (iffp != IFF_OKAY) return(iffp); }
/* ---------- ID -------------------------------------------------------*/
typedef LONG ID; /* An ID is four printable ASCII chars but
* stored as a LONG for efficient copy & compare.*/
/* Four-character IDentifier builder.*/
#define MakeID(a,b,c,d) ( (LONG)(a)<<24L | (LONG)(b)<<16L | (c)<<8 | (d) )
/* Standard group IDs. A chunk with one of these IDs contains a
SubTypeID followed by zero or more chunks.*/
#define FORM MakeID('F','O','R','M')
#define PROP MakeID('P','R','O','P')
#define LIST MakeID('L','I','S','T')
#define CAT MakeID('C','A','T',' ')
#define FILLER MakeID(' ',' ',' ',' ')
/* The IDs "FOR1".."FOR9", "LIS1".."LIS9", & "CAT1".."CAT9" are reserved
* for future standardization.*/
/* Pseudo-ID used internally by chunk reader and writer.*/
#define NULL_CHUNK 0L /* No current chunk.*/
/* ---------- Chunk ----------------------------------------------------*/
/* All chunks start with a type ID and a count of the data bytes that
follow--the chunk's "logicl size" or "data size". If that number is odd,
a 0 pad byte is written, too. */
typedef struct {
ID ckID;
LONG ckSize;
} ChunkHeader;
typedef struct {
ID ckID;
LONG ckSize;
UBYTE ckData[ 1 /*REALLY: ckSize*/ ];
} Chunk;
/* Pass ckSize = szNotYetKnown to the writer to mean "compute the size".*/
#define szNotYetKnown 0x80000001L
/* Need to know whether a value is odd so can word-align.*/
#define IS_ODD(a) ((a) & 1)
/* This macro rounds up to an even number. */
#define WordAlign(size) ((size+1)&~1)
/* ALL CHUNKS MUST BE PADDED TO EVEN NUMBER OF BYTES.
* ChunkPSize computes the total "physical size" of a padded chunk from
* its "data size" or "logical size". */
#define ChunkPSize(dataSize) (WordAlign(dataSize) + sizeof(ChunkHeader))
/* The Grouping chunks (LIST, FORM, PROP, & CAT) contain concatenations of
* chunks after a subtype ID that identifies the content chunks.
* "FORM type XXXX", "LIST of FORM type XXXX", "PROPerties associated
* with FORM type XXXX", or "conCATenation of XXXX".*/
typedef struct {
ID ckID;
LONG ckSize; /* this ckSize includes "grpSubID".*/
ID grpSubID;
} GroupHeader;
typedef struct {
ID ckID;
LONG ckSize;
ID grpSubID;
UBYTE grpData[ 1 /*REALLY: ckSize-sizeof(grpSubID)*/ ];
} GroupChunk;
/* ---------- IFF Reader -----------------------------------------------*/
/******** Routines to support a stream-oriented IFF file reader *******
*
* These routines handle lots of details like error checking and skipping
* over padding. They're also careful not to read past any containing context.
*
* These routines ASSUME they're the only ones reading from the file.
* Client should check IFFP error codes. Don't press on after an error!
* These routines try to have no side effects in the error case, except
* partial I/O is sometimes unavoidable.
*
* All of these routines may return DOS_ERROR. In that case, ask DOS for the
* specific error code.
*
* The overall scheme for the low level chunk reader is to open a "group read
* context" with OpenRIFF or OpenRGroup, read the chunks with GetChunkHdr
* (and its kin) and IFFReadBytes, and close the context with CloseRGroup.
*
* The overall scheme for reading an IFF file is to use ReadIFF, ReadIList,
* and ReadICat to scan the file. See those procedures, ClientProc (below),
* and the skeleton IFF reader. */
/* Client passes ptrs to procedures of this type to ReadIFF which call them
* back to handle LISTs, FORMs, CATs, and PROPs.
*
* Use the GroupContext ptr when calling reader routines like GetChunkHdr.
* Look inside the GroupContext ptr for your ClientFrame ptr. You'll
* want to type cast it into a ptr to your containing struct to get your
* private contextual data (stacked property settings). See below. */
#ifdef FDwAT
typedef IFFP ClientProc(struct _GroupContext *);
#else
typedef IFFP ClientProc();
#endif
/* Client's context for reading an IFF file or a group.
* Client should actually make this the first component of a larger struct
* (it's personal stack "frame") that has a field to store each "interesting"
* property encountered.
* Either initialize each such field to a global default or keep a boolean
* indicating if you've read a property chunk into that field.
* Your getList and getForm procs should allocate a new "frame" and copy the
* parent frame's contents. The getProp procedure should store into the frame
* allocated by getList for the containing LIST. */
typedef struct _ClientFrame {
ClientProc *getList, *getProp, *getForm, *getCat;
/* client's own data follows; place to stack property settings */
} ClientFrame;
/* Our context for reading a group chunk. */
typedef struct _GroupContext {
struct _GroupContext *parent; /* Containing group; NULL => whole file. */
ClientFrame *clientFrame; /* Reader data & client's context state. */
BPTR file; /* Byte-stream file handle. */
LONG position; /* The context's logical file position. */
LONG bound; /* File-absolute context bound
* or szNotYetKnown (writer only). */
ChunkHeader ckHdr; /* Current chunk header. ckHdr.ckSize = szNotYetKnown
* means we need to go back and set the size (writer only).
* See also Pseudo-IDs, above. */
ID subtype; /* Group's subtype ID when reading. */
LONG bytesSoFar; /* # bytes read/written of current chunk's data. */
} GroupContext;
/* Computes the number of bytes not yet read from the current chunk, given
* a group read context gc. */
#define ChunkMoreBytes(gc) ((gc)->ckHdr.ckSize - (gc)->bytesSoFar)
/***** Low Level IFF Chunk Reader *****/
#ifdef FDwAT
/* Given an open file, open a read context spanning the whole file.
* This is normally only called by ReadIFF.
* This sets new->clientFrame = clientFrame.
* ASSUME context allocated by caller but not initialized.
* ASSUME caller doesn't deallocate the context before calling CloseRGroup.
* NOT_IFF ERROR if the file is too short for even a chunk header.*/
extern IFFP OpenRIFF(BPTR, GroupContext *, ClientFrame *);
/* file, new, clientFrame */
/* Open the remainder of the current chunk as a group read context.
* This will be called just after the group's subtype ID has been read
* (automatically by GetChunkHdr for LIST, FORM, PROP, and CAT) so the
* remainder is a sequence of chunks.
* This sets new->clientFrame = parent->clientFrame. The caller should repoint
* it at a new clientFrame if opening a LIST context so it'll have a "stack
* frame" to store PROPs for the LIST. (It's usually convenient to also
* allocate a new Frame when you encounter FORM of the right type.)
*
* ASSUME new context allocated by caller but not initialized.
* ASSUME caller doesn't deallocate the context or access the parent context
* before calling CloseRGroup.
* BAD_IFF ERROR if context end is odd or extends past parent. */
extern IFFP OpenRGroup(GroupContext *, GroupContext *);
/* parent, new */
/* Close a group read context, updating its parent context.
* After calling this, the old context may be deallocated and the parent
* context can be accessed again. It's okay to call this particular procedure
* after an error has occurred reading the group.
* This always returns IFF_OKAY. */
extern IFFP CloseRGroup(GroupContext *);
/* old */
/* Skip any remaining bytes of the previous chunk and any padding, then
* read the next chunk header into context.ckHdr.
* If the ckID is LIST, FORM, CAT, or PROP, this automatically reads the
* subtype ID into context->subtype.
* Caller should dispatch on ckID (and subtype) to an appropriate handler.
*
* RETURNS context.ckHdr.ckID (the ID of the new chunk header); END_MARK
* if there are no more chunks in this context; or NOT_IFF if the top level
* file chunk isn't a FORM, LIST, or CAT; or BAD_IFF if malformed chunk, e.g.
* ckSize is negative or too big for containing context, ckID isn't positive,
* or we hit end-of-file.
*
* See also GetFChunkHdr, GetF1ChunkHdr, and GetPChunkHdr, below.*/
extern ID GetChunkHdr(GroupContext *);
/* context.ckHdr.ckID context */
/* Read nBytes number of data bytes of current chunk. (Use OpenGroup, etc.
* instead to read the contents of a group chunk.) You can call this several
* times to read the data piecemeal.
* CLIENT_ERROR if nBytes < 0. SHORT_CHUNK if nBytes > ChunkMoreBytes(context)
* which could be due to a client bug or a chunk that's shorter than it
* ought to be (bad form). (on either CLIENT_ERROR or SHORT_CHUNK,
* IFFReadBytes won't read any bytes.) */
extern IFFP IFFReadBytes(GroupContext *, BYTE *, LONG);
/* context, buffer, nBytes */
/***** IFF File Reader *****/
/* This is a noop ClientProc that you can use for a getList, getForm, getProp,
* or getCat procedure that just skips the group. A simple reader might just
* implement getForm, store ReadICat in the getCat field of clientFrame, and
* use SkipGroup for the getList and getProp procs.*/
extern IFFP SkipGroup(GroupContext *);
/* IFF file reader.
* Given an open file, allocate a group context and use it to read the FORM,
* LIST, or CAT and it's contents. The idea is to parse the file's contents,
* and for each FORM, LIST, CAT, or PROP encountered, call the getForm,
* getList, getCat, or getProp procedure in clientFrame, passing the
* GroupContext ptr.
* This is achieved with the aid of ReadIList (which your getList should
* call) and ReadICat (which your getCat should call, if you don't just use
* ReadICat for your getCat). If you want to handle FORMs, LISTs, and CATs
* nested within FORMs, the getForm procedure must dispatch to getForm,
* getList, and getCat (it can use GetF1ChunkHdr to make this easy).
*
* Normal return is IFF_OKAY (if whole file scanned) or IFF_DONE (if a client
* proc said "done" first).
* See the skeletal getList, getForm, getCat, and getProp procedures. */
extern IFFP ReadIFF(BPTR, ClientFrame *);
/* file, clientFrame */
/* IFF LIST reader.
* Your "getList" procedure should allocate a ClientFrame, copy the parent's
* ClientFrame, and then call this procedure to do all the work.
*
* Normal return is IFF_OKAY (if whole LIST scanned) or IFF_DONE (if a client
* proc said "done" first).
* BAD_IFF ERROR if a PROP appears after a non-PROP. */
extern IFFP ReadIList(GroupContext *, ClientFrame *);
/* parent, clientFrame */
/* IFF CAT reader.
* Most clients can simply use this to read their CATs. If you must do extra
* setup work, put a ptr to your getCat procedure in the clientFrame, and
* have that procedure call ReadICat to do the detail work.
*
* Normal return is IFF_OKAY (if whole CAT scanned) or IFF_DONE (if a client
* proc said "done" first).
* BAD_IFF ERROR if a PROP appears in the CAT. */
extern IFFP ReadICat(GroupContext *);
/* parent */
/* Call GetFChunkHdr instead of GetChunkHdr to read each chunk inside a FORM.
* It just calls GetChunkHdr and returns BAD_IFF if it gets a PROP chunk. */
extern ID GetFChunkHdr(GroupContext *);
/* context.ckHdr.ckID context */
/* GetF1ChunkHdr is like GetFChunkHdr, but it automatically dispatches to the
* getForm, getList, and getCat procedure (and returns the result) if it
* encounters a FORM, LIST, or CAT. */
extern ID GetF1ChunkHdr(GroupContext *);
/* context.ckHdr.ckID context */
/* Call GetPChunkHdr instead of GetChunkHdr to read each chunk inside a PROP.
* It just calls GetChunkHdr and returns BAD_IFF if it gets a group chunk. */
extern ID GetPChunkHdr(GroupContext *);
/* context.ckHdr.ckID context */
#else /* not FDwAT */
extern IFFP OpenRIFF();
extern IFFP OpenRGroup();
extern IFFP CloseRGroup();
extern ID GetChunkHdr();
extern IFFP IFFReadBytes();
extern IFFP SkipGroup();
extern IFFP ReadIFF();
extern IFFP ReadIList();
extern IFFP ReadICat();
extern ID GetFChunkHdr();
extern ID GetF1ChunkHdr();
extern ID GetPChunkHdr();
#endif /* not FDwAT */
/* ---------- IFF Writer -----------------------------------------------*/
/******* Routines to support a stream-oriented IFF file writer *******
*
* These routines will random access back to set a chunk size value when the
* caller doesn't know it ahead of time. They'll also do things automatically
* like padding and error checking.
*
* These routines ASSUME they're the only ones writing to the file.
* Client should check IFFP error codes. Don't press on after an error!
* These routines try to have no side effects in the error case, except that
* partial I/O is sometimes unavoidable.
*
* All of these routines may return DOS_ERROR. In that case, ask DOS for the
* specific error code.
*
* The overall scheme is to open an output GroupContext via OpenWIFF or
* OpenWGroup, call either PutCk or {PutCkHdr {IFFWriteBytes}* PutCkEnd} for
* each chunk, then use CloseWGroup to close the GroupContext.
*
* To write a group (LIST, FORM, PROP, or CAT), call StartWGroup, write out
* its chunks, then call EndWGroup. StartWGroup automatically writes the
* group header and opens a nested context for writing the contents.
* EndWGroup closes the nested context and completes the group chunk. */
#ifdef FDwAT
/* Given a file open for output, open a write context.
* The "limit" arg imposes a fence or upper limit on the logical file
* position for writing data in this context. Pass in szNotYetKnown to be
* bounded only by disk capacity.
* ASSUME new context structure allocated by caller but not initialized.
* ASSUME caller doesn't deallocate the context before calling CloseWGroup.
* The caller is only allowed to write out one FORM, LIST, or CAT in this top
* level context (see StartWGroup and PutCkHdr).
* CLIENT_ERROR if limit is odd.*/
extern IFFP OpenWIFF(BPTR, GroupContext *, LONG);
/* file, new, limit {file position} */
/* Start writing a group (presumably LIST, FORM, PROP, or CAT), opening a
* nested context. The groupSize includes all nested chunks + the subtype ID.
*
* The subtype of a LIST or CAT is a hint at the contents' FORM type(s). Pass
* in FILLER if it's a mixture of different kinds.
*
* This writes the chunk header via PutCkHdr, writes the subtype ID via
* IFFWriteBytes, and calls OpenWGroup. The caller may then write the nested
* chunks and finish by calling EndWGroup.
* The OpenWGroup call sets new->clientFrame = parent->clientFrame.
*
* ASSUME new context structure allocated by caller but not initialized.
* ASSUME caller doesn't deallocate the context or access the parent context
* before calling CloseWGroup.
* ERROR conditions: See PutCkHdr, IFFWriteBytes, OpenWGroup. */
extern IFFP StartWGroup(GroupContext *, ID, LONG, ID, GroupContext *);
/* parent, groupType, groupSize, subtype, new */
/* End a group started by StartWGroup.
* This just calls CloseWGroup and PutCkEnd.
* ERROR conditions: See CloseWGroup and PutCkEnd. */
extern IFFP EndWGroup(GroupContext *);
/* old */
/* Open the remainder of the current chunk as a group write context.
* This is normally only called by StartWGroup.
*
* Any fixed limit to this group chunk or a containing context will impose
* a limit on the new context.
* This will be called just after the group's subtype ID has been written
* so the remaining contents will be a sequence of chunks.
* This sets new->clientFrame = parent->clientFrame.
* ASSUME new context structure allocated by caller but not initialized.
* ASSUME caller doesn't deallocate the context or access the parent context
* before calling CloseWGroup.
* CLIENT_ERROR if context end is odd or PutCkHdr wasn't called first. */
extern IFFP OpenWGroup(GroupContext *, GroupContext *);
/* parent, new */
/* Close a write context and update its parent context.
* This is normally only called by EndWGroup.
*
* If this is a top level context (created by OpenWIFF) we'll set the file's
* EOF (end of file) but won't close the file.
* After calling this, the old context may be deallocated and the parent
* context can be accessed again.
*
* Amiga DOS Note: There's no call to set the EOF. We just position to the
* desired end and return. Caller must Close file at that position.
* CLIENT_ERROR if PutCkEnd wasn't called first. */
extern IFFP CloseWGroup(GroupContext *);
/* old */
/* Write a whole chunk to a GroupContext. This writes a chunk header, ckSize
* data bytes, and (if needed) a pad byte. It also updates the GroupContext.
* CLIENT_ERROR if ckSize == szNotYetKnown. See also PutCkHdr errors. */
extern IFFP PutCk(GroupContext *, ID, LONG, BYTE *);
/* context, ckID, ckSize, *data */
/* Write just a chunk header. Follow this will any number of calls to
* IFFWriteBytes and finish with PutCkEnd.
* If you don't yet know how big the chunk is, pass in ckSize = szNotYetKnown,
* then PutCkEnd will set the ckSize for you later.
* Otherwise, IFFWriteBytes and PutCkEnd will ensure that the specified
* number of bytes get written.
* CLIENT_ERROR if the chunk would overflow the GroupContext's bound, if
* PutCkHdr was previously called without a matching PutCkEnd, if ckSize < 0
* (except szNotYetKnown), if you're trying to write something other
* than one FORM, LIST, or CAT in a top level (file level) context, or
* if ckID <= 0 (these illegal ID values are used for error codes). */
extern IFFP PutCkHdr(GroupContext *, ID, LONG);
/* context, ckID, ckSize */
/* Write nBytes number of data bytes for the current chunk and update
* GroupContext.
* CLIENT_ERROR if this would overflow the GroupContext's limit or the
* current chunk's ckSize, or if PutCkHdr wasn't called first, or if
* nBytes < 0. */
extern IFFP IFFWriteBytes(GroupContext *, BYTE *, LONG);
/* context, *data, nBytes */
/* Complete the current chunk, write a pad byte if needed, and update
* GroupContext.
* If current chunk's ckSize = szNotYetKnown, this goes back and sets the
* ckSize in the file.
* CLIENT_ERROR if PutCkHdr wasn't called first, or if client hasn't
* written 'ckSize' number of bytes with IFFWriteBytes. */
extern IFFP PutCkEnd(GroupContext *);
/* context */
#else /* not FDwAT */
extern IFFP OpenWIFF();
extern IFFP StartWGroup();
extern IFFP EndWGroup();
extern IFFP OpenWGroup();
extern IFFP CloseWGroup();
extern IFFP PutCk();
extern IFFP PutCkHdr();
extern IFFP IFFWriteBytes();
extern IFFP PutCkEnd();
#endif /* not FDwAT */
#endif IFF_H