home *** CD-ROM | disk | FTP | other *** search
- ENGLISH
-
- Boot Intro v1.2
- (the picture is says V1.1 because I couldn't find the IFF file )
- -----------------------------------------------------------------------------
-
- Author : Roger Fischlin
- Steigerwaldweg
- Hanau 7
- West Germany
- Phone.: (06181) 650266
- Date : 8.July.1989
-
-
-
- >This program may be distributed for non-commercial purposes. You are
- encouraged to copy it. But only the author is allowed to gain any profit by
- using and/or distributing it. You are not allowed to change any part of the
- program.
-
-
-
-
- This program creates a small intro on the bootblock of any disk which will
- appear after you insert the disk for booting.
- The headline can be up to 44 letters. To put it the middle of the screen use
- spaces. The scrolling text can be up to 300 letters. Boot intro uses an
- overscan screen so you might not see the first letter(s).
-
- Gadgets:
- -------
-
- SAVE : Put the intro on the disk in drive df0:
- LOAD : Read an intro from the disk in drive df0:
- INFO : something about the author !
- QUIT : clear ?
- SHOW : show the current intro. To return keep mouse button pressed and move
- pointer away from the gadget. Now release the button.
-
-
- To destroy an intro use INSTALL (CLI).
-
-
- Attention : the old bootblock will be destroyed when you save an intro !
- You use Boot Intro on your own risk . It's your fault if you destroy a
- special bootblock used by a game.
-
- Boot Intro V1.2 cannot read intros created by Boot Intro V1.0 .
-
-
- Sometimes a virus or a virus protector don't allow to write the intro
- on the track - Boot Intro will now show you if this happens.
-
-
-
-
- Enjoy it!
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- DEUTSCH
- Boot Intro v1.2
- (Die Grafik sagt zwar V1.1, ich konnte aber das IFF-Bild nicht mehr finden !)
- -----------------------------------------------------------------------------
-
- Autor : Roger Fischlin
- Steigerwaldweg
- Hanau 7(Steinheim)
- Tele.: (06181) 650266
- Datum : 8.Juli.1989
-
- >Dieses Programm ist Public-Domain-Soft!
- Sie dürfen es benutzen und kopieren , jedoch dürfen Sie das Programm nicht
- verkaufen .
-
-
-
- Dieses Programm erzeugt auf dem Bootblock ein kurzes Intro mit einer Kopf-
- zeile und einer Laufschrift, das sofort beim Booten nach dem Einlegen der
- Diskette erscheint.
- Die Überschrift darf nur max.44 Zeichen lang sein. Sie müssen sie selbst
- mit vorangestellten Leerzeichen zentrieren. Die Laufschrift kann bis zu
- 300 Zeichen lang sein. Das Programm benutzt ein sog. Overscan-Bildschirm,
- d.h. die Zeichen am rechten und linken Rand sind bei alllen Monitoren nicht
- sichtbar sein.
-
- Gadgets:
- -------
-
- SAVE : Mit diese Schalter kann das Boot Intro gespeichert werden. Die
- betreffende Diskette muß ins Laufwerk df0: .
- LOAD : Ein Bootintro wird geladen, sie können jetzt die Texte editieren.
- INFO : Informationen Über den Autor
- QUIT : Programm verlassen
- SHOW : Mit diesem Schalter können Sie sich das Bootintro ansehen. Um wieder
- zurückzukehren, Bitte Maustaste gedrückt halten und von dem Schalter
- bewegen, oder, während das Intro sichtbar ist, die Maus bewegen und
- dann die Maustaste drücken.
-
-
- Ein Bootintro kann mit dem CLI-Befehl INSTALL wieder entfernt werden.
-
- Vorsicht : der alte Bootblock wird durch ein Bootintro zerstört ! Deshalb
- nur bei Disketten, die den Bootblock nicht nutzen, ein Intro erzeugen.
- Der Autor übernimmt keine Haftung für zerstörte Bootblöcke !
-
-
- Mit BootIntro V1.2 kann man kein von BootIntro V1.0 erzeugten Intros
- editieren !
-
- Manchmal verhindert ein Virus oder ein Virusschutzprogramm das Beschreiben
- des Bootblocks - Boot Intro zeigt an, wenn dies der Fall ist.
-
-
-
-
-
-
-
- Viel Spaß !
-
-
-
-
-
-
-
-
-
-
-